GE(S) BTD 27 OF 2024-25 REPAIR TO PATH DRAINS HARDSTANDING BOUNDARY WALL GATES AND FENCING UNDER AOR OF AGE BR II UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION

Amount

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc., and removing unserviceable outside of MD land and complete all as specified and directed.

Dismantling of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons etc laid dry or laid dry and pointed,and removing unserviceable outside of MD land and complete all as specified and directed.

M & L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 metre mean radius in CM 1: 4 complete all as specified and directed by Engineer-in charge.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified Note : The rate includes for cleaning of old bricks.

M & L brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 all as specified but except bricks.

Taking down cement plaster on brick stone or concrete walls ceiling etc including racking out joints, hacking for key, scrubbing down with water etc and removing the debries outside of MD land and complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed by Engineer-in charge.

M&L for PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in foundation filling, floors, paths, sub base etc. complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick works masonry or concrete surfaces in CM 1:4 finished the surface even & smooth without using extra cement complete all as specified and directed by Engineer-in charge.

M&L for applying two coats of cement base paint over a coat of primer on newly plastered wall and ceiling surfaces including cornices & pilasters etc including preparation of new surface all as specified

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling fencing wire mesh of any type and description

Excavation in post holes in soft/ loose soil each n exc 0.5 cum , getting out , returning filling in and ramming earth or broken rubble mixed with around earth in layers n exc 25 cm thick , watering and removing surplus spoil to a distance n exc 50m and making good surface complete all as specified

M&L for PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in foundation of posts and struts complete all as specified.

Mild steel work angle iron fencing posts and flat iron including embedding in concrete and screwing etc posts and struts in fencing incl cutting tops to shape as directed bent to shape, drilling holes notching for wire etc flat iron fillets (fro securing wire mess etc) including all necessary drilling bolting or riveting etc of Fe 290 Gde E-185 complete all as specified.

Supply only chain link mild steel fencing complete all as specified. Note ; the weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made accordingly.

Fixing only chain link fencing including line wires, any mess size and type of standards, rails, straining bolts etc including provision of binding wire complete all as specified.

S&F only 10mm dia MS round bar for fixing of chain link fencing with post complete all as specified.

Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed wire with 2mm dia barbs at 75mm spacing and straining and fixing to any type of stranded rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured) complete all as specified.

Two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel and iron surfaces of any description exceeding 10 cm in width or girth including preparation of surfaces complete all as specified

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of neck 5 to 10 mm

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick soft/loose soil complete all as specified and directed by Engineer-in charge.

Removing excavated soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified

M & L Mild steel work such as grills/ gates, gratings ,etc with ends of bars shouldered and /or riveted , or forged into spikes and similar work con-forming Fe .290.Gde-E-165

M & L TMT bars 8mm dia and over cut to length , bent to shape required ,including cranking ,bending spirally hooping for columns , hooping ends and binding with and including MS wire (annealed) not less than 0.90m dia or securing with clips complete all as specified and directed by engr-in-charge

M&L Providing precast cement concrete louvers and jallies, type B0 (12.5mm graded aggregate) , 40mm thick (measured solid), including all mouldings etc set in cement mortar 1:4, including taking down old complete all as specified

Demolition of cement concrete (unreinforced) including tiles of any description & terrazzo finish/tiles of any description, etc. in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing the debries outside of MD land and complete all as specified and directed.

M&L cement concrete (type C2 1:3:6) 50 mm thick (40mm graded stone aggregate) as in floors, paths, plinth protections etc.; laid in alternate panels, and finishing top surface even & smooth without using extra cement, complete all as specified

Dismentalling Stone Slabs and interlocking tiles all as specified and as directed

S & F machine pressed precast concrete coloured interlocking paver block any shape and size confirming to SI 15658-2006 of 80 mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directeed

M&L for 60mm thick machine pressed precast concrete interlocking pavers/tiles with grey cement and no pigment, confirming to IS 15658-2006 M-35 Grade, of any size & shape as directed in floors complete all as specified and as directeed

Dismantling of interlocking tiles of any type and description and refixing the same after cleaning/washing complete all as specified and directed.

M&L for sand filling under interlocking tiles 25mm thick including watering and consolidating complete all as specified

M&L for providing factory made precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in kerb stone, quoin blocks, apex stones etc. including formwork weathering, slighted rounded or chamfered angles throating etc. including necessary earth work complete all as specified and directed.

M&L chequered cement concrete tiles with grey cement and pigments, 30cmx30cmx25mm thick, coloured & design as approved, set, jointed and pointed in neat cement slurry as in floors etc; laid over & including 15mm thick screed in CM (1:6), complete all as specified

M&L for first quality, scratch free, straight cut/joint free, vitrified pavers for external use, 9-10mm thick, of size 300mm x 300mm, in floors etc over & including 15mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with grout of matching shade of tiles, complete.

M&L for preparation of old/new decorated plastered or concrete surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of pavement / kerb marking paint over a coat of primer as per IS: 164 in different tint complete all as specified and directed.

S&F Welded steel wire fabric supplied and fixed with exsiting reinforcement using binding wire and fastners complete all as specified and as directed by Eng-in- Charge.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

BALAJI CONSTRUCTIONS

R K KATARIA AND SONS

M/s HANS BROTHERS

NAIB ENTERPRISES

ABHINANDAN ENTERPRISES

P K BANSAL CONTRACTOR

Lovneesh Jindal Contractor