SPECIAL REPAIR TO CERTAIN E/M INSTALLATION/ELECTRIC PANELS AT MES POWER HOUSE AND DSC REST ROOM, FENCING AT STAGE-I AT AF STN NATHATOP

Amount

SCHEDULE 'A' PART-I (E/M ) .

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc

Point wiring as for one light/ exhaust fan point controlled by one way switch with PVC conduit (concealed) / over surface with PVC unsheathed single core copper conductor cable fire retardant (FR) 1.5 sqmm multistrand in existing/ new sunk cast iron/ pressed steel terminal boxes, including cement mortar work (1:3) to ends or edges as if required for concealed wiring with alongwith PVC unsheathed solid copper earth wire of size/ dia 1.5 Sqmm connections to be connected to common earth duly complete all as specified and as directed

All as per the description of serial item No 1.02 above but for one 5 pin 15 Amps socket outlet on independent board with 2.5 sqmm copper conductor cable for phase and nuetral and 2.5 sqmm PVC unsheathed solid copper conductor earth cable.

All as per the description of serial item No 1.02 above but for one 3 pin 5 Amps socket outlet on same board with 1.5 sqmm copper conductor cable for phase and nuetral and 1.5 sqmm PVC unsheathed solid copper conductor earth cable.

All as per the description of serial item No 1.02 above but for one 3 pin 5 Amps socket outlet on independent board with 1.5 sqmm copper conductor cable for phase and nuetral and 1.50 sqmm PVC unsheathed solid copper conductor earth cable.

M&L for switch socket combination 2 in 1, 3 pin 6 Amps flush type universal complete all as specified and as directed

M&L for switch piano flush type single pole one way 6 Amps complete all as specified and as directed

M&L for ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed

M&L for Lamp holder insulated body with back plate for batten fittings complete, all as specified and as directed

M&L for LED lamp 10 watts in white colour with maximum lumen output 850 Lm and colour temp 3000 K with base cap B-22 complete all as specified and directed

S&F in repair light fitting 1 x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete

S&F in repairs LED bulk head fitting corrosion resistant unbreakable PC with high quality IP 65 protection, 100 lm W with PDC aluminium housing and milky difuser, complete all as specified and as directed

S&F water heater steel body with copper inner tank and heating element upto 2 kw storage type, electric supplied and installed complete capacity 25 litres BEE 5 star rated complete all as specified and as directed

M&L sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 8 way and making good disturbed surface of walls complete all as specified and as directed

S&F miniature circuit breaker (MCB) SPN O-63 Amps 10 KA, 240 V 'C' complete all as specified and as directed

S&F miniature circuit breaker (MCB) SPN O-40 Amps 10 KA complete all as specified and as directed

S&F in replacement GI tubes, 20mm bore 'medium grade', galvanised, with all fitting (such as bend, tee, elbow, union etc) laid in trenches/ fixed in wall or in Air complete all as specified and as directed

S&F in replacement GI tubes, 15mm bore 'medium grade', galvanised, with all fitting (such as bend, tee, elbow, union etc) laid in trenches/ fixed in wall or in air complete all as specified and as directed

S&F gunmetal gate valve, brass ball valve, gunmetal non-returning valve in PP-R pipe line (cost of male sockets included) of 20mm bore complete all as specified and as directed

S&F in repair rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs complete all as specified and as directed

S&F in repair Bib taps 15mm bore cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

M&L Ball brass valves 20mm high pressure with polyethene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed

M&L for air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and as directed

M&L for GI tubes, 'Medium grade' galvanised, 40mm bore with all fitting (such as bend, tee, elbow, union etc) and fixed to wall/ ceilings laid in floors or in trenches complete all as specified and as directed

S&F in repair stop/ gate valve 40mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

S&F in repair stop/ gate valve 20mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

S&F in repair stop/ gate valve 15mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross- sectional area 95 sqmm 3.5 core complete all as specified and as directed

M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross- sectional area 16 sqmm 2 core complete all as specified and as directed

M&L steel tubular poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as cable 2.5 sqmm PVC 3 core connection of fitting to MCB DB ON OFF etc complete all as specified and as directed specified type 410 SP-22 (8.5 metres) all as specified and as directed

S&F PVC juction box IP 66 suitable size of MCB 20 Amps with 200 Amps rating busbar incoming, outgoing cable proper glands complete all as specified and as directed

Dismantling and taking down fluorescent tube light single/ double of any wattage or size street light fitting for repair or replacement of burnt/ worn out accessories or carrying to MES store (Accessories or components to be provided free for replacement by department) all as specified and as directed

S&F LED Flood light 70 Watt 230 Volt AC outdoor type with thermal management in multiple optics and equipped IP-66 protection, impact and corrosion resistant complete with driver and lamp

M&L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, suitable for existing security light fittings etc complete all as specified and as directed

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of size 25mm bore dia complete all as specified and as directed

Refixing old steel tubing and connections in new or old position 25mm bore dia (Walls, ceiling, floors, etc) complete all as specified and as directed

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of size 40/50mm bore dia complete all as specified and as directed

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and as directed

Cutting existing steel tubing for alternations or additions (Each cut measured) of size 20mm dia complete all as specified and as directed

S&F Plug type bib taps, cast iron, screwed for iron pipe and fixed of size 20mm bore dia complete all as specified and as directed

S&F 20mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth; for laying of cables and getting out in any type of soil complete all as specified and as directed

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed

M&L sub class 'B' old size well burnt brick laid flate in trenches as protection to cable complete all as specified and as directed

S&F in replacement of vertical three phase distribution board, VTPN, 4 way 440 volts having IP- 54 IK 09 protection, double door with provision for fixing of MCCBs as incomer and MCBs as outgoing complete after taking down existing unserviceable main switch, busbar, GI box including accessories therein and disposing from site complete all as specified and as directed

S&F MCCB three pole 415 Volts 50 Hz 125 Amps rating with rupturing capacity not less than 16kA, lcs = 100% lcu, adjustable thermal & adjustable megnatic settings with spreader links, copper reducer etc including taking down existing old unserviceable including accessories therein and disposing from site complete all as specified and as directed

PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in coping around including necessary form work and fair finishing of exposed surfaces all as specified

S&F in replacement GI tubes, 'light grade', galvanised, with all fitting laid in trenches of 80mm dia complete all as specified and as directed

M&L in replacement of LT panel out door type cubical floor mounted type made out 3.15mm thick MS sheet duly powder coated complete bus bar 200 Amps rating made of Aluminium strip duly drilled holes for connections and mounted on epoxy based post insulators for 3 phase 4 wire 415 volts 50 HZ power supply system suitable for and including the following :- (a) MCCB 415 volts 63 Amps 4 Pole with reputing CAP 36KA Microprocessor based for over load short circuit protation : 01 No incoming. (b) MCCB 415 volts 32 Amps 4 Pole with reputing CAP 36KA Microprocessor based for over load short circuit protation : 02 Nos outgoing. (c) All accessories prewired with suitable size copper conductor cable/ strip and suitable foundation as per manufacturer's recommendation. (d) Indicator set RYB 01 set 3 pcs LED type.

Supply and fixing of XLPE insulated, screened, PVC bedded,galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 1100 volts Earthed, grade cross sectional area 120 sq. mm 3.5complete all as specified and directed by Engineer in charge

Supply and fixing in repair cable jointing kit for 11 KV (Earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm to 185 sqmm complete all as specified and directed by Engineer in charge

Supply and fixing in repair cable jointing kit for 1.1 KV heat shrinkable indoor terminations heat shrink type joint complete with jointing material and accessories suitable for XLPE armoured aluminium conductor cable of size 95 sqmm to 185 sqmm complete all as specified and directed by Engineer in charge

Supply and fixing in repair cable jointing kit for 1.1 KV heat shrinkable straight through terminations heat shrink type joint complete with jointing material and accessories suitable for XLPE armoured aluminium conductor cable of size 95 sqmm to 185 sqmm complete all as specified and directed by Engineer in charge

Supply and fixing in repair cable jointing kit for 1.1 KV heat shrinkable outdoor terminations cold shrink type joint complete with jointing material and accessories suitable for XLPE armoured aluminium conductor cable of size 95 sqmm to 120 sqmm complete all as specified and directed by Engineer in charge

S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 11000 volts grade, of size 120 sqmm 3 core laid in trenches or passing through pips/ ducts complete all as specified and directed by Engineer in charge

S&F in repair XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, of size 70 sqmm 3.5 core laid in trenches or passing through pips/ ducts complete all as specified and directed by Engineer in charge

S&F in repair XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, of size 95 sqmm 3.5 core laid in trenches or passing through pips/ ducts complete all as specified and directed by Engineer in charge

S&F in repair XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, of size 120 sqmm 3.5 core laid in trenches or passing through pips/ ducts complete all as specified and directed by Engineer in charge

S&F in repair of off load change over switch 415 volts in sheet metal enclosers 4 pole of capacity 630 Amps complete all as specified and as directed by Engineer in charge .

S&F in repair of off load change over switch 415 volts in sheet metal enclosers 4 pole of capacity 400 Amps complete all as specified and as directed by Engineer-in charge.

Earthing complete with copper earth plate electrode of size 60cmx60cmx3.15mm thick as earth electrode burried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level using copper earth strip 20x3mm dia as earth continuity conductor connected to earth plate by means of copper thimbles, nuts, bolts, washers including joining of earth electrode and earth wire by means of welding, all as directed including providing earth wire protection pipe GI light grade 15mm dia from earth plate to main switch board/ panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 2mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil, removing surplus excavated material all as required at site and as specified in EP No 3 of MES SSR Part-I (2009) directed by Engineer-in-Charge including testing on completion. Note :- (a) Copper strip beyond test point shall be measured and paid separately. (b) Earthing resistance result shall be less than 3 Ω .If the result comes more than 3 Ω, the contractor shall carry out the earthing at separate location /site given by the Engr-in-Charge after taking out of earth electrode without any extra cost to the deptt (c) Payment will be made after obtaining user signature.

M&L for Earth continuity conductor or main earthing copper strip 20x3mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated complete all as specified and as directed in charge.

M&L for test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm long complete all as specified and as directed in charge.

S&F Air termination, sigle pointed aluminium rod 12mm dia and 300mm long complete all as specified and as directed in charge.

Supply and fixing Bulding security LED street light fitting 90 Watt 5700K pf ≥90 efficency 102 lm/W 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp fixing of wall,pole,building with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection including taking down complete all as specified and as directed cat part NO ENDURAPEARLMAGNUMSL90WLED 757PASYTOTG Havells are its equivalent BAJAJ/WIPRO/CG

S&F Street light bracket made out of 40/32 mm dia GI light grade tubing not less than .75 Mtr long bend to shape including pole clamps/fastners clips nails made out flat iron and nuts, bolts and washers etc complete all as specified and directed.

M&L of Plastic distribution board ISI Mark 2 modules metal SPN 2 way (when MCBs to be used) flush mounted including taking down existing unserviceable DBs /board /box including accessories therein and disposing off complete all as specified and directed. Make:Legrand/HAVELLS /indoasian

M&L for surge protection device (SPD) with serviceability indicator Type 1 &2 3 phase with neutral for protection of equipment against lightning and switching surges withdraw able type,of phase description Uc 320 volts,In 20 kA ,Imax 50 kA ,Iimp 12.5 kA and neutral Un 255 volts,Iimp 12.5kA kA,In 40 kA ,Imax 70 kA VP < 1.5KV& protected IP20 complete Confiring to IEC/EN 61643-II complete all as specified and directed. Make : Havells/schneider electric/L&T/ABB

M&L for surge protection device single phase Type 1&2 (SPD) with serviceability indicator single phase with neutral for protection of equipment against lightning and switching surges withdraw able type,of phase description Un 320 volts,Iin 30 kA ,Imax 50 kA ,Iimp 12.5 kA and neutral Uc 255 volts,I imp 25 kA,In 30 kA ,Imax 60 kA including protected IP20 complete Confiring to IEC/EN 61643-II complete all as specified and directed. Make : Havells/schneider electric/L&T/ABB all as specified

M&L for surge protection device single phase Type 3 (SPD) with serviceability indicator single phase with neutral for protection of equipment against lightning and switching surges withdraw able type,of phase description Un 275 volts,Iin 5 kA , voc 6kv Imax 10 kA ,Iimp 12.5 kA and neutral Uc 275 volts,I imp 30,voc 6kv kA,In 30 kA ,Imax 60 kA including protected IP20 complete Confiring to IEC/EN 61643-II complete all as specified and directed. Make : Havells/schneider electric/L&T/ABB all as specified

S&F in repair LED lights fitting 1x 20W LED 6500K, 220V, AC decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy box type four feet with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completeall as specified and directed by Engr-in-Charge. CATPART NO LHEXAWP7IN1W020 Make Havells its equivalent to/Bajaj/CG

M&L for sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit heavey duty drawn through PVC surface/concealed conduit and connected to main board and making good disturbed surface and disposing from site complete all as specified and as directed. Note: Two runs each of one RM of 4.00 sqmm main cable and one RM of 4.00 sqmm cable earth wire together alongwith conduit shall be considered as 1 running metre for payment purpose.

M&L for point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through & including PVC, rigid concealed conduit,( heavy duty, 19/20mm dia, ISI marked, with and including new modular sunken boxes and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. (Make of copper conductor : Havells/Polycab/KEI) (Make of copper conductor : Havells/polycab/KEI) Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.

M&L of point wiring for one 16 Amps socket outlet independent with PVC insulated, unsheathed FRLS multi stranded copper conductor 2.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through & including PVC, rigid concealed conduit,( make of conduits kaliga/bajaj/polycab) heavy duty, 19/20mm dia, ISI marked, with and including new modular sunken boxes and suitable size of frame thickness not less than 1.5sq mm, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 2.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications all as specified. (Make of copper conductor : Havells/polycab/KEI) Note :-Switches, sockets, outlets & regulators will be measured and paid for separetely.

S&F Switch piano flush type single pole , one way 6 Amps IS-3854 complete all as speciifed and as directed

S&F Switch socket combination 5 in 1, 16 Amp flush type universal type, conforming to IS-3854 complete all as specified and as directed.

M&L for MCB distribution board having IP-54 protection, powder coated, Single door, flush mounted complete with locking arrangement suitable for 12 way SPN with 200 Amp rated bus bar 230 volt AC supply including taking down existing old unservicable including accessories therein & disposing from site complete all as specified and as directed

S&F in repair 240V 10KA 'C' curve miniature circuit breaker (MCB)SPN 32 Amps of poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as directed

S&F in repair 415V 10 KA 'C' curve miniature circuit breaker (MCB)TPN 40 Amps of poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specifeied and as dierected.

S&F in repair 240V 10KA 'C' curve miniature circuit breaker (MCB)SPN 6- 32 Amps of poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and as directed

S&F in repair of tubes , medium grade' galvanised, with all ditting and fixed complete to wall and ceilings or laid in floors of size 40mm dia complete all as specified and as directed by Engineer-in-charge.

S&F in repair of tubes , medium grade' galvanised, with all ditting and fixed complete to wall and ceilings or laid in floors of size 50mm dia complete all as specified and as directed by Engineer-in-charge.

S&F in repair of tubes , medium grade' galvanised, with all ditting and fixed complete to wall and ceilings or laid in floors of size 80mm diacomplete all as specified and as directed by Engineer-in-charge.

S&F in repair of tubes , medium grade' galvanised, with all ditting and fixed complete to wall and ceilings or laid in floors of size 25mm dia complete all as specified and as directed by Engineer-in-charge.

S&F in repair of cast iron sluice valve ISI marked 100mm dia class PN 1.6 flanged with gun metal spindle including all fittings such as nuts , bolts, washers tec with iron wheel confirming to IS: 780/14846 complete all as specified and as directed by Engineer-in-charge.

S&F in repair of cast iron sluice valve ISI marked 80mm dia class PN 1.6 flanged with gun metal spindle including all fittings such as nuts , bolts, washers tec with iron wheel confirming to IS: 780/14846 complete all as specified and as directed by Engineer-in-charge.

M&L in repair gun metal globe / gate valve (ISI) marked with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed by Engineer-in-charge for the following sizes:- ( Make: Leader / BIR / Zoloto / TATA / KSB / Kartar / Kirloskar)

80 mm dia.

50 mm dia.

40 mm dia.

25 mm dia.

Supply and fixing in repair with testing and commissioning outdoor type LT cubical panel Factory fabricated CRCA Sheet powder coated with structureal siemens grey RAL 7032 paint front and back openable and lockable by key from both side having louvers and air vent gasket and totally vermin proof made out of 3.15 mm thick CRCA sheet duly compartmentalized for incoming and outgoing laminated copper busbar suitable for 400 Amp duly insulated with colour coded heat shrinkable sleeves and mounted on DMC/epoxy insulators The incomer and outgoing shall have extension link two times the rating of individual feeder. All links shall be insulated with colour coded heat shrinkable sleeves having provision for termination of incomers and outgoing cables. All control wires shall be not less than 2.5 Sq mm multi stranded copper conductor and properly bunched/tied, ferruled for proper identification and crimpled with adequate size of lugs. The cubical will have a support of angle size 50x50x5mm, & -04 Nos duly grouted 30 Cm below the GL in PCC including a detachabale pre-drilled gland plate of thickness 3.15 mm The auxilary support of suitable SPD (surge protation Device ) protected shall be provided Note:-Design /Drawing of L.T. Panel shall be approved by Garrison Engineer. INCOMING (a) Changeover switch on load in open execution 4 pole 415 V, 50 cycles-200 Amp -02 Nos( One for commercial & DG Set Supply & other for phase sequence changing. (b) Copper Busbar 4 pole (three phase and one for neutral) suitable for 400 Amp. (c) MCCB Cap 200 Amp, 4 pole, 415V, 50 c/s 36 KA-02 No. OUTGOING (a) MCCB Cap 100 Amp, 4 pole, 415V, 50 c/s 16 KA-02 No. (b) MCCB Cap 63 Amp, 4 pole, 415V, 50 c/s 16 KA-03 No. (c) MCB TPN capacity 63 Amps, 'C' series 415V, 50 c/s 10 KA-03 No. Make : Legrand / Schnieder / L&T (d) MCB SPN capacity 32 amp, 'C' series-02 Nos Make : Legrand / Schnieder / L&T (e) Star/delta starter suitable upto 35KW /40HP 3 phase, 415V, 50 c/s induction motor including protection against over voltage, under voltage, over current under current reverse phasing, single phasing, earth fault with required PLC . Qty -01 No Make : L&T or equivalent model in BCH/Havells (f) Star/delta starter suitable upto 25KW /30HP 3 phase, 415V, 50 c/s induction motor including protection against over voltage, under voltage, over current under current reverse phasing, single phasing, earth fault with required PLC . Qty -02 No Make : L&T or equivalent model in BCH/Havells

Supply and fixing in repair with testing and commissioning outdoor type LT cubical panel Factory fabricated CRCA Sheet powder coated with structureal siemens grey RAL 7032 paint front and back openable and lockable by key from both side having louvers and air vent gasket and totally vermin proof made out of 3.15 mm thick CRCA sheet duly compartmentalized for incoming and outgoing laminated copper busbar suitable for 400 Amp duly insulated with colour coded heat shrinkable sleeves and mounted on DMC/epoxy insulators The incomer and outgoing shall have extension link two times the rating of individual feeder. All links shall be insulated with colour coded heat shrinkable sleeves having provision for termination of incomers and outgoing cables. All control wires shall be not less than 2.5 Sq mm multi stranded copper conductor and properly bunched/tied, ferruled for proper identification and crimpled with adequate size of lugs. The cubical will have a support of angle size 50x50x5mm, & -04 Nos duly grouted 30 Cm below the GL in PCC including a detachabale pre-drilled gland plate of thickness 3.15 mm The auxilary support of suitable SPD (surge protation Device) protected shall be provided Note:-Design /Drawing of L.T. Panel shall be approved by Garrison Engineer. INCOMING (a) Changeover switch on load in open execution 4 pole 415 V, 50 cycles-160 Amp -02 Nos( One for commercial & DG Set Supply & other for phase sequence changing. (b) Busbar 4 pole (three phase and one for neutral) suitable for 400 Amp. (c) MCCB Cap 200 Amp, 4 pole, 415V, 50 c/s 36 KA-01 No. OUTGOING (a) MCCB Cap 100 Amp, 4 pole, 415V, 50 c/s 16 KA-03No. b) MCB TPN capacity 63 Amps,C' series 415V, 50 c/s 10 KA-04 No. Make : Legrand / Schnieder / L&T (c) MCB SPN capacity 32 amp, 'C' series-02 Nos Make : Legrand / Schnieder / L&T (d) Star/delta starter suitable upto 15KW /20HP 3 phase, 415V, 50 c/s induction motor including protection against over voltage, under voltage, over current under current reverse phasing, single phasing, earth fault with required PLC . Qty -02 No Make : L&T or equivalent model in BCH/Havells

S&F stainless steel water tank (fire retardant, closed cell, chemically cross linked insulation material with thermal & Acoustic insulation), volume 500 ltrs, 1950 mm height with stand, 1420 mm dia (approx) and LID dia 500 mm , with 38 mm discharge, 20mm overflow, 38 mm inlet and 50 mm outlet with 20mm Airvent including complete fittings, installaitonand testing all as specified.

S & F Submersible pump set 20HP including 03 phase motor 415 Volt rated 50 HZ , insulated copper winding etc, suitable for and upto 11 stages incluiding bearing,bush , shaft,bowels,thrust bearing, bronze impellers and cashing of pump etc comprising /suitable for directly coupled with motor stainless steel body for 250 mm dia borewell multi-stages , discharge of 1000 LPM at 120 Metre head and complete with suitable end connecting tail piece ,NRV a complete all as specified and directed.

S & F in Repair MCCB 4 pole, 415 V , Adjustable type, 200 Amps with breaking capacity 36 KAcomplete all as specified and as directed .

S & F in Repair MCCB 4 pole, 415 V , Adjustable type, 400 Amps with breaking capacity 36 KAcomplete all as specified and as directed .

Excavation in trenches in any type of soil not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth, for foundation, laying of pipes and LT cable and getting out, , complete all as specified and directed by Engineer-in-Charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each in any type of soil , complete all as specified and directed by Engineer-in-Charge

Removing excavated spoil (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point , complete all as specified and directed by Engineer-in-Charge

Dry sand cushioning to under ground cable all as per clause 19.75 of SSR Part - I laid before and after laying of cable, complete all as specified and directed by engr-in-charge.

S&F flexible copper cable 01 sqmm 6/10 core size from sump/over head tank to pump house for connecting the both units of water level indicator and passing through PVC flexible/rigid conduit and fixing on walls wherever required.

Sub class 'B' old size bricks well burnt as covering to under ground cables , laid dry, flat over the cables on sand cushioning with width equal to length of the brick as mechanical protection to cable in repair , complete all as specified and directed by Engineer-in-Charge

S&F un-reinforced precast concrete cable cover class HVP type 1 flat size 300mm x 180mm x 40mm complete all as specified and directed by the Engineer-in-Charge

S&F Submersible cable copper 10 sqmm 3 core Flat type double coated PVC insulated multi stranded FRLSH ,IS marked complete all as direction Engr in charge Make : Finolex/ havells/RR cabels/ KEI)

M & L for PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) in foundations, filling and mass concret, complete all as specified and directed.

Supply laying, connecting and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, of size 6 sqmm 3.5 core laind in trenches or passing through pips/ ducts complete all as specified and directed by Engineer in charge

SCHEDULE 'A' PART-II (B/R )

Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed.

Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm each complete all as specified and as directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering.

Demolition of cement concrete (unreinforced) of any descriptions, in Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and directed.

Demolition of reinforcement cement concrete of any description and any position not otherwise specifically provided complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises

Taking down cement plaster of any description on Brick Walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, remove dust, debries/rubbish etc complete all as specified and as directed.

Demolition of Brick work or stone/boulders masonry, built in cement mortar all as specified and directed by Engr-in-charge.

Dismentling wrought iron or mild steel work of such of any description not otherwise provided for complete all as specified & directed.

Pressed steel frames 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,supplied and fixed

M & L for PCC 1:3:6 type C-0 (using 20mm graded aggregate)for filling of Steel door frames all as specified and as directed.

M & L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) for fixing of Steel door frames all as specified and as directed.

S&F Factory made 2nd class hardwood plain framed panelled shutters 35mm thick (any no of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board med density/wood particle board with commercial face veneers fixed to chowkats compete all as directed all as directed.

M&L for 2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimetre each complete all as specified.

M & L for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded

M & L for Steel ventilator with top hung shutter including hinges, steel peg stay, complete

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame hall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame complete all as specified and as directed

M&L for Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including Gl frame work of size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr-in-charge.

S & F 0.63mm thick Galvanised corrugated mild steel sheeting with rectangular corrugation side lap, fixed with L-type or J type or cranked hook bolts and washers in roofs, walls etc class 8 type 0.63 mm thick complete all as specified.

S & F 0.80 mm thick plain galvanized PGI sheets in ridges, hips ,valley gutters, etc class 8. with grade of zinc coating 275 complete all as specified.

M & L complete removal of existing roof treatment and preparation the roof surfaces for new reatement on roof including preparation of surfaces and the like complete all as specified. Note : The quoted shall be deemed to include for dismantling and refixing in position of lightening protection after carrying out the treatment.

M & L in repairs APP based polymeric water proofing membrane ,five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) laid on CGI sheet of primed surface by forced application complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 0.40 Kg per Sqm including cleaning surfaces, complete all as specified.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

M & L for providing precast cement concrete as in bond stone ( for stone walling) of PCC 1:3:6 type C-1 ( 20 mm gradedstone agg) set in CM 1:6 complete all as specified

M&L for Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L RCC 1:2:4 type B1 (20mm graded aggregate) in lintels, Beams, cantilevers, bressummers over 1.5m spans complete all as specified & directed.

S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per srl item No. 3.30 above but 5mm dia and over including 10mm dia in stirrups, spaces and binders etc all as specified.

M&L for formwork to sides and soffits of floor or roof beams, lintels etc. rough finished concrete flat surfaces all as specified and as directed

Extra over stone walling (sand stone) for hammer dressing with a maximum depression on face from straight edge held against the dressed surface not exceeding 40mm to face stone and dressing of face beds and joints all as specefied.

S&F PVC 110mm dia pipe in any length with rubber rings joints laid as in weep holes complete all as specified.

M&L for hand packing (any thickness) at back of wall over arches etc. and rising (or lowering) to the required level, complete all as specified.

M&L for plain cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in coping etc including necessary formwork as required complete all as directed and specified.

S&F 4mm thick glass sheet oridinary quality in steel or wooden frames complete with fixing materials such as putty, glazing pins, wooden beads etc.

M & L PCC 1:3:6 type C-1 50mm thick (using 20mm graded aggregate) as in plinth protection finished the concrete surface even and smooth W/O using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in two layers (10mm + 5mm) on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and fair complete with water proofing compound on outer layer all as specified. Note:-Water proofing compound shall be measured and paid separately under the respective item.

Supply only water proofing compound

M&L for 10 mm thick rendering ion fair faces of brick/concrete or stone surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified.

M&L for preparation of new plastered surfaces on walls and applying three coats of white wash complete all as specified and directed.

M&L for applying two coats of Antifungal Acrylic Exterior Emulsion paint over a coat of primer in camouflange pattern on newly plastered surfaces of walls and preparation of walls complete all as specified and directed by Engr-in-Charge.

M&L 100 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base

M&L 25mm th PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in flooring, finished rough and even.

M & L 15mm thick screed bed or bedding layer in cement mortar1:4 for laying floor finishes, finished even and fair complete all as specified.

M&L for Italian tiles laminated wooden flooring of size 1214mm x 193mmx8.00mm thick type AC-3 and fixing by using a coat of approved adhesive not less than 1.32 kg/sqm by weight over 2mm thick foam over existing even and smooth surface all as specified and directed by Engr-in-Charge.

M & L for Non skid tiles coloured flooring with tile size exc 0.06 sqm and n.exc 0.11 sqm each tile, 7-8mm thick of any colour pattern in floor set and jointed in grey cement slurry and pointed in white or coloured cement to match the colour of tile complete and all as specified.

M&L chequred cement concrete tiles 30cm X 30cm X 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M&L Rendering 10 mm thick on wall and the like to receive tile in cement mortar (1:4), complete all as specified.

M&L Coloured glazed ceramic tiles glossy finish of size 300x450x7mm to 8mm thick in dado’s/skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles complete and all as specified.

S&F in repairs galvanised, 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails staining bolts, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc as directed ( each line wire to be measured.

Fixing of old MS angle post to boundary wall with PCC 1:3:6 type C1 including dismantling of old fencing post at same location complete all as specified & directed .

S & F aluminium anodised barrel tower bolts extruded section of 100 mm, long complete all as specified .

S & F aluminium anodised handles fabricated type extruded section of 150 mm, long complete all as specified .

S & F MS Butt hinges medium weight cold rolled 100 mm size ISI marked , long complete all as specified .

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed.

S&F Wind ties for roof including securing bolts posts and struts fencing including cutting tops to shape as directed drilling holes flat fillets including all necessary drilling bolting or reveting etc.

S&F mild steel rolled section conforming to Fe-290 (Gde E-165), as in main and cross beams, hip and jack rafters, purlins where connected to common rafters fixed with angle cleats and other connecting plates etc. complete all as specified and directed.

S & F framed work such as grills gratings, MS pipe etc with ends of bars shouldered and rivetsor forged into spikes, framed guard bars, barred into doors, ladders framed blusters walk ways railings frame work of water tanks and similar work complete all as specified.

M&L applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer on new steel surfaces of any description not exc 10 cm width or girth including preparation of surfaces, complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed.

S&F 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe all as directed.

S&F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

M&L in repairs 32 mm waste fittings, brass, chromium plated for glazed wash basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed to waste pipe complete all as specified and directed.

S&F in repair vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning all as specified and as directed.

S&F in repairs 450mm long PVC connection 15mm bore with PTMT nuts.

S&F in repairs 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified.

S&F in repairs swivel shower of PTMT any colour for fixing with 15mm pipe (minimum weight 40gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weight 40 gms), complete all as specified and directed.

S & F in repairs 32mm dia PVC flexible waste pipe 1100 mmlong for WHB complete all as specified and as directed.

S & F in repairs 15 mm bore Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete.

S & F in repair 15 mm bore stop cock/Angle cock, brass CP fancy type.

S & F in repairs 110 mm dia PVC (SWR) pipe single socketed with rubber ring joints, laid in trenches or in walls including taking down old pipe.

S & F in repairs 110 mm dia PVC (SWR) junction single,(Single T) equal or unequal

S & F in repairs 110 mm dia PVC (SWR) vent cowl

M&L for 5mm thick solid PVC wall lining/ panelling solid wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing provided for overlapping of linning and sealing the same at top and bottom if required at site as per directions of Engineer-in-Charge. Make - Rajshree or equivalent

M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall panelling any colour to make PVC frame as per specification and drawing

RANBIR ENTERPRISES

DAVINDER SINGH