REPAIR TO DRAIN, CLEANING OF AREA DRAIN AND REPAIR TO DRAIN, BOUNDARY WALL, MS COVER DRAIN RCC, COVER, HARDSTANDING ETC IN MUMBAI UNDER AGE B/R-I, GE (NW) KUNJALI, COLABA, MUMBAI

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar, including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles including copings etc.and removing debris outside MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Material & Labour for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified

Material & Labour for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as a leveling course / padding on RCC roof top surfaces laid to slope and foinished fair and even complete all as specified.

Excavating in trenches n exc 1.5m wide & n exc 1.5m in depth; for foundation, etc. or for manholes n.exc.10 Sqm on plan and n.exc.1.5m in depth and getting out in any type of soil complete all as specified.

Removing excavated material exc. 1.50 Km but n exc. 15 Km and depositing where directed. Note: The place of disposal shall be find out by the contractor.

Returning filling in , including spreading, leveling, watering and well ramming in layers not exc 25 cm.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Material & Labour for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (GdeE- 250) quality A complete all as specified and directed.

Material & Labour for rolled mild steel in framed work as in door or gate of angle or other section with gusset plates, rails, braces etc complete,drilled for fixing of steel sheeting or other covering. Doors/gates to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings( exclusive of steel sheating or other covering,running rails and guides) and hanging also fastening and fixing conforming to Fe 410-W ( Gde E-250 ) quality A complete all as specified.

Material & Labour for mild steel plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment including all necessory drilling, bolting,riveting or welding conforming to Fe 410 -W (Gde E- 250) quality-A complete all as specified.

Material & labour for mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings etc conforming to Fe.290.Gde-E-165 complete all as specified

Material & Labour for sliding heavy iron doors roller/ wheel upto 200mm x 100mm including fixing arrangement, welding, brushing, ball bearing, greasing (Sample kept at GE (NW) Kunjali) complete all as specified and directed.

Material & labour for preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

Dismantling stone slabs, pavers and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land. Note: The place of disposal shall be find out by the contractor.

Material & labour for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base and finished fair and even complete all as specified.

Material & labour for 20mm thick granite stone slab (of any type) machine cut, laid in skirting/dado/ cill over and including 10 mm thick backing coat in cement mortar 1:3, set and jointed with grey cement paste and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified.

Material & labour for cement concrete tiles 250 mm x 250 mm x 22 mm thick, with grey cement and no pigment, machine pressed; set, jointed and pointed in neat cement slurry laid over and including 15 mm thick screed bed or bedding layer in cm (1:3), including cut and polished as specified in SSR part I complete all as specified.

Material & labour for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

Material & labour for machine pressed precast concrete inter locking paver block any shape and size with grey cement and pigment conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified .

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Material & Labour for rendering 20mm thick in two coats(15mm inner coat 5mm finishing coat) on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even including mixing integral water proofing compound in finishing coat in the proportion as per manufacturer's instructions including necessary formwork and safety measures complete all as specified and directed. Note- Water proofing compound shall be measured and paid separately.

Material & labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even & smooth without using extra cement completed all as specified.

Material & labour for preparing new plastered surfaces of walls and applying two coats of weather proof antifungal acrylic exterior paint (100% Acrylic) over a coat of self primer including necessary scaffolding and safety arrangement complete all as specified.

Material & labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of debris out of MD land complete all as specified. Note: The place of disposal shall be find out by the contractor.

Demolition of RCC of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and separating, scraping and cleaning of reinforcement and removing debris outside MD land. Note: The place of disposal shall be find out by the contractor.

Material & labour for providing precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landings, cover slabs , chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain fair faces including chamfers, weathering, throating and use of forms, moulds or machine moulds etc, setting in cement mortar (1:4) with joints to match complete all as specified . Note - Reinforcement shall be measured and paid separetly.

Material & Labour RCC (design mix) M-30 grade (using 20 mm graded stone aggregate) in foundations, including rafts, footings etc complete all as specified.

Material & Labour RCC (design mix) M-30 grade (using 20 mm graded stone aggregate) in columns, pillars, piers, posts and struts.

Material & Labour RCC (design mix) M-30 grade (using 20 mm ground stone aggregate) in slabs supported on walls, beams and columns in floors, roofs ,landings ,balconies canopies ,deck slabs and in shelves and the like complete all as specified.

Material & labour for TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips complete all as specified .

Ditto- all as per item No 31.00 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders.

Material & labour for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams etc, vertical or to batter for rough finished surfaces of concrete flat.

Material & labour for form work to sides & sofits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc 200mm thick ( horizontal or sloping) for rough finished surfaces of concrete flat.

Material & labour for form work to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete flat.

Material & labour for PCC 1:4:8 type D2 using (40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified.

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.

Supply & fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hook and including scaffolding upto any height, nainital pattern/mangalore tiles pettern. complete all as specified.

Supply & fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge fixed with self tapping screws complete all as specified

Material & labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth & applying one coat of synthetic enamel paint complete all as specified.

Material & Labour for preparation of old painted surfaces of walls, chajjas, parapets, roof facia and applying one coat of weather proof acrylic based paint (100% acrylic) including necesssary scaffolding and safety arrangement for high rise buildings upto 8 storey complete all as specified and as directed by Engr-in-Charge

Material & Labour for preparation of old painted surfaces of walls, chajjas, parapets, roof facia and applying two coats of weather proof acrylic based paint (100% acrylic) including necesssary scaffolding and safety arrangement for high rise buildings upto 8 storey complete all as specified and as directed by Engr-in-Charge

Material & Labour for removing cover slab of any description from drain / culvert and cleaning the drain / culvert removing soils, spoils, vegetation, silt etc and refixing the cover slab in existing position and making good disturbed surfaces and removing waste material outside MD Land complete all as directed by Engineerin-Charge. Note: i) The place of disposal shall be find out by the contractor.

Supply only Integral water proofing compound .

Material & Labour for preparation of surfaces of paver block, tiles etc by cleaning with water to remove loose dust and screb with wire brush to remove algae, fungus and moss groth and applying two coats of floor coat emulson paint complete all as specified and directed. Note - Floor coat emulsion shall be with abrasion resistance and high adhesionstrength and formulated to handle vehiculer and human trafic.

Material & Labour for preparation of old GI sheet in roof/ wall/ cladding and applying two coats of synthetic enamel paint of approved colour/tint complete all as specified .

Material & Labour for 1.5 mm thick galvanised steel sheet as in Valley gutters fixed with rivets or other suitable arrangements over MS brackets Trapezoidal shape of required profile with desired slope fixed with self tapping screws complete all as specified and as directed

RAJENDRA CONSTRUCTION (BID ID -3168792)

Satyanarayan Trading Co. (BID ID -3170665)

SR Construction (BID ID -3170601)

Sachin santosh dalvi (BID ID -3170577)

Bob Enterprises (BID ID -3170946)

SHREE JAGDISH FURNITURE CO. (BID ID -3167668)

Pragathi Infrastructure Co. (BID ID -3175747)