PROVISION OF TECHNICAL INFRA FOR CERTAIN UNIT (PH-II OF TWO PHASES) AT SEVOKE ROAD MILITARY STATION UNDER GE (P) SILIGURI

Amount

BUILDINGS & STRUCTURE (Sch 'A' PART-I(A))

SECTION-B Lump sum price worked out by the Contractor for “BUILDINGS & STRUCTURE” as listed in Schedule ‘A’ Part-I(B). Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 24,10,400.00 inserted by the MES in Schedule ‘A’ Part-I(B).

EARTHWORK, SITE CLEARANCE AND SITE DEVELOPMENT (Sch 'A' PART-II)

Lump sum price worked out by the Contractor for “EARTHWORK, SITE CLEARANCE AND SITE DEVELOPMENT” as listed in Schedule ‘A’ Part-II. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 86,78,923.78 inserted by the MES in Schedule ‘A’ Part-II.

ROAD, PATH & CULVERT (Sch 'A' PART-III)

Lump sum price worked out by the Contractor for “(ROAD, PATH & CULVERT)” as listed in Schedule ‘A’ Part-III. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 3,07,01,279.34 inserted by the MES in Schedule ‘A’ Part-III.

SEWAGE DISPOSAL (Sch 'A' PART-IV)

Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL” as listed in Schedule ‘A’ Part-IV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 4,92,907.80 inserted by the MES in Schedule ‘A’ Part-IV.

AREA DRAINAGE (Sch 'A' Part-V)

Lump sum price worked out by the Contractor for “(AREA DRAINAGE)” as listed in Schedule ‘A’ Part-V. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 1,02,27,895.19 inserted by the MES in Schedule ‘A’ Part-V.

PROTECTIVE WORK, BOUNDARY WALL AND STEEL GATE (Sch 'A' Part-VI)

Lump sum price worked out by the Contractor for “(PROTECTIVE WORK, BOUNDARY WALL AND STEEL GATE)” as listed in Schedule ‘A’ Part-VI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 59,42,599.52 inserted by the MES in Schedule ‘A’ Part-VI.

EXTERNAL WATER SUPPLY (Sch 'A' Part-VII)

Lump sum price worked out by the Contractor for “(EXTERNAL WATER SUPPLY)” as listed in Schedule ‘A’ Part-VII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 17,01,223.50 inserted by the MES in Schedule ‘A’ Part-VII.

EXTERNAL ELECTRIFICATION (Sch 'A' PART-VIII)

Lump sum price worked out by the Contractor for “(EXTERNAL ELECTRIFICATION)” as listed in Schedule ‘A’ Part-VIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 97,50,492.79 inserted by the MES in Schedule ‘A’ Part-VIII.

(FIRE FIGHTING & FIRE ALARM SYSTEM (Sch 'A' Part-IX)

Lump sum price worked out by the Contractor for “(FIRE FIGHTING & FIRE ALARM SYSTEM)” as listed in Schedule ‘A’ Part-IX. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 29,12,610.00 inserted by the MES in Schedule ‘A’ Part-IX.

LIGHTNING PROTECTION (Sch 'A' Part-X)

Lump sum price worked out by the Contractor for “(LIGHTNING PROTECTION) ” as listed in Schedule ‘A’ Part-X. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 84,161.80 inserted by the MES in Schedule ‘A’ Part-X.

DG SET (Sch 'A' Part-XI)

Lump sum price worked out by the Contractor for “(DG SET)” as listed in Schedule ‘A’ Part-XI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 60,583.20 inserted by the MES in Schedule ‘A’ Part-XI.

SUMMER APPLIANCES AND AIR CONDITIONING (Sch 'A' Part-XII)

Lump sum price worked out by the Contractor for “(SUMMER APPLIANCES AND AIR CONDITIONING)” as listed in Schedule ‘A’ Part-XII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 38,10,584.16 inserted by the MES in Schedule ‘A’ Part-XII.

SOLAR HOT WATER SUPPLY) (Sch 'A' Part-XIII)

Lump sum price worked out by the Contractor for “(SOLAR HOT WATER SUPPLY)” as listed in Schedule ‘A’ Part-XIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 7,63,018.32 inserted by the MES in Schedule ‘A’ Part-XIII.

MISCELLANEOUS ITEMS REQUIRED FOR B/R & E/M SERVICES (Sch 'A' Part-XV)

SEWAGE DISPOSAL M&L for construction of RCC Septic tank (25 Users) conventional type designed to carry sewage and sullage water, excavation in any type of soil, PCC (1:3:6) below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter complete all as specified and shown on Drg No. CESZ/2020/TD/ST-07-115 Sheet 1/3 & 3/3.

M&L for construction of RCC Septic tank (50 Users) conventional type designed to carry sewage and sullage water, excavation in any type of soil, PCC (1:3:6) below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter complete all as specified and shown on Drg No. CESZ/2020/TD/ST-07-115 Sheet 1/3 & 3/3.

M&L for construction of RCC Septic tank (100 Users) conventional type designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:3:6 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter complete all as specified and shown on Drg No. CESZ/2020/TD/ST-07-115 Sheet 1/3 & 3/3.

M&L for construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of DWC complete filled with brick bats of size 1.8 M dia X 3 M effective depth complete all as specified and shown on Drg No. SZ/TD-14 Sheet 1/1.

M&L for construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of DWC complete filled with brick bats of size 2.40 M dia X 3.00 M effective depth complete all as specified and directed.

M&L 150mm bore,HDPE double wall corrugated(DWC) SN-8 PIPE (HDPE Black Pipe) WITH COUPLER Conforming to IS:16098 Part-II:2013 sewage pipes laid in trenches and jointed as per manufacturer,s instruction with and including all fitting complete all as specified and as directed.

SECURITY WALL, FENCING AND GATE M & L for Fabrication , Installation, construction of Steel Gate with and including RCC columns Gate pillars and connected acessories complete Shown on Drg No. CESZ/2018/TD-27 SHEET 1/3 to 3/3 and specified as directed. .

AIR CONDITIONING Supply, installation, testing & commissioning of copper wound voltage stabilizer, ISI marked for automatic operation, single phase, naturally air cooled, indoor type & designed for I/P variation between 170 V to 260 V with O/P voltage stabilization at 230 V with accuracy of +/- 2.5%, with high & low voltage cut out & time delay & of capacity 4.0 KVA including electric connection complete all as specified and directed.

Supply, installation, testing & commissioning of copper wound voltage stabilizer, ISI marked for automatic operation, single phase, naturally air cooled, indoor type & designed for I/P variation between 170 V to 260 V with O/P voltage stabilization at 230 V with accuracy of +/- 2.5%, with high & low voltage cut out & time delay & of capacity 3.0 KVA including electric connection complete all as specified and as directed.

DG SET Supply, installation, testing and commissioning Silent type built in within an acoustic enclosure Diesel Engine driven Generating set water cooled including AMF panel for standby power supply 415 volts, 3 Phase, 4 wire, 50 cycles / sec,0.8 power factor, 30.0 KVA (24 KW) or next higher standard size available KVA,1500 RPM. Self excited self regulated brushless AC generator installed. The alternator directly coupled to diesel engine, mounted on common base frame & complete with self starter 12 volt. Acoustic enclosure suitable for ambient condition at Siliguri area and confirming to condition under IS 10002, 13364 Part I 1992, BS 5514/5000 to meet exhaust emission test as per revised MoEF norms/as per CPCB -IV plus or as per latest. Fuel tank capacity not less than 08 hours fuel requirement & battery as reccommended by OEM battery leads, sound proof canopy etc. with features for automatic shutdown in the event of a circuit failure condition arising from low oil pressure, high coolant temperature, over speed etc. & microprocessor based gen-set controller governor with the following under-mentioned features & all as specified & directed :- NOTE : The capacity of Generator set shall be net after all due derating factors as per relevant IS/BS Standards design. Item Continued as 14.12 to 14.20

(A) Alternator : Standard design alternator rated at 30.0 KVA/ nearest higher available capacity at 0.8 (lag) power factor AC, 3 - phase 4 - wire, 415 volts, 50 Hz, 1500 RPM, self exicited self regulated screen protected drip proof brushless design with winding in pole faces, insulating class 'H' and voltage regulation of + 1% at rated voltage from no load to full load. The alternator shall be confirming to BS 5000, IS: 13364 Part I (1992) and shall be in position to generate supply with frequecy regulation with in + 1% tolerance. The alternator will be suitable for tropical climate and shall generally confirm to BS - 2613/5000/ IS - 4722. (i) Insualation class - 'H' (ii) Temparature rise Class - 'H' (iii) Excitation : Self Excited (iv) Regulation performance: The voltage is kept constant with + 1%. (v) Frequency regulation + 1%

(B) Diesel Engine: Adequate capacity of Diesel engine water cooled to drive independently above alternator and after considering de-rating as per site conditons after generating and reducing power consumed by accessories directly coupled through flexible coupling multi cylinder multi stroke direct injection, cold starting 1500 RPM, as per relevant IS/BS complete, with standard accessories all as specified and required for safe handling and operation salient features of accessories shall be as under:- (i) Fly wheel with housing (ii) Cooling system :- Moulded radiator with fan & belts. (iii) Cooling Water pump : - Centrifugal type belt driven. (iv) Exhaust System :- Exhaust System complete with exhaust piping of suitable dia with MS pipe medium grade. MS Exhaust pipe with bends/flanges and all accessories to be supplied and erected as per OEM recommendation. The Exhaust Pipe shall be insulated with low resin bounded wool of min 75 mm thickness min 144 Kg/m density. The dia/thickness and Stack height of the Exhaust pipe shall be as per OEM recommendation and CPCB norms. The minimum height of Stack to be provided with each generator set shall be worked out as per latest CPCB norms. Turbo charger type Exhaust manifold Silencer : Residential type

(v) Fuel System :- Diesel Fuel injection system with fuel injectors, fuel injection solenoid switch controlled by governor electronic operated/ (as recommended by OEM) for 1% speed /frequency regulation. Comprising with Fuel Filters and Fuel Hoses. (vi) Lube oil System :- Comprising of Lubricating oil filter, Lubricating oil pump etc.

(vii) Air Intake System :- Air intake Manifold, Air cleaner dry type etc (viii) Governer Electronic type (ix) Starting System :- Electric Self starter with and including battery charging alternator 12 Volts DC. (x) Batteries :- Batteries of maintenance free of capacity 12 V, 180 AH- 01 No complete with copper conductor multistranded leads of suitable length from self starter to the battery terminals complete with initial charge and initial fill of electrolyte all as specified. Start and stop push button Ignition key / Switch Radiator with blower fan & first fill of coolant oil Corrosion inhibitor coolant (xi) Generator Monitoring Panel : - Comprising of all standard items as per standard manufacturing, iginiton key switch and start / stop arrangement, indications for Engine parametes, hour run meter, RPM meter, Engine oil pressure indicator, water/coolant temperature indicator, Battery volt display.

(xii) Safety Controls : - Engine low lube oil pressure, high water temperature and over speeding of engine. (xiii) Coupling arrangement : - Flexible coupling (xiv) Accessories :- AVM Pads built- in or separtely mounted to manufactrer base frames. (xv) Base Frame : - Made out of ISMC of sturdy design made of MS channel with necessary reinforcement and predetermined holes as per manufacturer. (xvi) Fuel Tank :- Daily service fuel tank made complete on a common base inside the acoustic enclosure as per manufacturer guidelines for min 8 hrs continuous operation. (xvii) MS/Steel flexible pipe line to and from the fuel tank to the DG Set. (xviii) Battery Charger shall be provided as per manufacturer guidelines (xix) The DG Set shall comply to the emission limits requirement as per Govt of India CPCB -IV plus or as per latest. The DG Set shall be complied with all test requirements as stipulated in the gazette notification. All relevant test results from NABL accredited lab shall be produced.

(g) Annuciation with indication lamps for : (i) Low lub oil pressure. (ii) High Water Temparature. (iii) Engine over speed. (iv) Battery low voltage. (v) Over voltage, under voltage and over current (vi) Display shall be alphanumeric LCD display with LED backlight. Controls and Records:- (a) Load on Indication (b) Load off indication (c) Engine start push button (d) Engine stop push button (e) Fault accept / reset push button (f) Battery Charger shall be provided as per manufacturer guidelines (g) Suitable to provide a record of most recent fault conditions & fault history. (h) Complete alternator data viz, voltage ph - ph, ph - neutral, KVA , frequency etc. (j) Complete engine data viz, starting battery voltage, engine temp, engine runnning hours, engine oil pressure etc. (k) Control incl provn of service adjustment & calibration of DG control functions.

(D) Civil Works :- All civil works including PCC plat form and related foundations including for panel and equipments including making good of distrubed area during installation and commissioning of genset. The depth and size of the foundation and PCC as recommended by the manufacturer. Note:- The contractor shall arrange for artificial load for testing of DG Set at site and the cost is deemed to be included in the above offer. (E) Acoustic Enclosure:- Manufactured by OEM suitable for 30.0 KVA DG Set. (i) Tested by NABL approved lab as per CPCB-IV Plus or as per latest (ii) It Should be as per latest rules and regulations of Ministry of Environment and Forest and Pollution control board. (iii) The generating set battery should be inside the enclosure. (iv) Fuel tank should be inside the enclosure, however, the fuel storage shall be enough for 8 hrs continuous operation. If required contractor may arrange outside fuel storage capacity to achieve this (v) Construction Details/specification are as follows : - (a) Outer body :- CRCA Sheet of 1.6mm thick. (b) Doors :- CRCA sheet of 1.6 mm thick (c) Sound Insulation :- 100 mm thick rock wool (minimum density 64kg/Cum)/ fire resistance foam/puff as per OEM/ as per standard manufacturing to achieve desired decibel level (vi) The acoustic should be composite in construction and fully assembled integral unit.

All as per Srl Item No. 14.11 to 14.20 here-in-before but capacity 10 KVA complete all as specified and directed.

M&L for development of trial bore by reaming upto 525 mm for 200 mtrs depth from ground level using any suitable method as per soil condition and as per central ground water board report including disposal of spoil from the site of work as specified in IS 2800 complete all as specified and directed.

Carrying out Electric logging Test of bore for precise delineation of granular zones with and including the quality of ground water and report interpretation through Geological Department or approved agency complete all as specified and directed. NOTE:- (i) Before drilling the bore contractor has to carry out site survey and Electric logging test/ survey for ground water exploration to be carried out of minimum 6 points for each borewell in and around said locations in area to obtain max ground water potential and report of the same has to be submiited to GE for taking approval of site/ point with maximum water potential for boring. (ii) All necessary arrangment, test/survey done by the contractor and cost for same to be included in unit rate. No extra charge will be paid by the contarctor.

M&L for packing pea graval 3 to 5 mm of size as per conforming to IS 8419, Part-I of natural shape brought directly from river bed and packing around the casing pipe of MS to entire depth upto ground level complete all as specified and directed.

S&F MS centralising guide made out of MS flat iron 40x6 mm and 30 cm length all as specified in IS : 2800 (Part – 1) : 1991 with and including connected fittings complete all as specified and directed.

Supplying and assembling including jointing, lowering & fixing in position 150 mm bore low carbon galvanised (LCG) strainer 3 Mtr/ 6 mtr long minimum 6 mm thickness each conforming to IS 8110 : 2000 (ISI marked) including mild steel socket threaded by electric arc welding both sides with and including connected fittings complete all as specified and directed.

S&F well cap suitable for 200 mm bore housing pipe made out of 6 mm thick steel plate with and including connected fittings complete all as specified and directed. NOTE : After completion of the work well cap will be used to keep the bore well closed until the submersible pumping set is installed.

M&L for development of tube well with air compressor of suitable capacity till sand/mud free water of potable quality is obtained and to achieve minimum discharge capacity of 36000 LPH/max yield complete all as specified and directed. NOTE : Compressor with and including all connected accessories & tube etc. shall be arranged by the contractor and cost deemed to inclusive in qoated rates.

M&L for development of tube well by over pumping 25% using suitable size/type of pump after completion of item above here-in -before with and including yield testing for tube well as per IS requirements complete all as specified and directed. NOTE :- Yield test of bore well shall be carried out in the presence of rep of Accepting Officer.(i) Alignment (vertically) Test and Step down test shall be carried out in the bore well constructed and result submitted to GE. (ii) All necessary arrangement for test/survey carried out by the contractor and cost for same to be included in unit rate of this items..

Supply only strata sample box with glass cover 3mm thick having internal dimension 1000x600x100mm made out of 20mm thick wrought Ist class hard wood shisham with hinges, hasp and staple including polishing complete with samples at various depth evenly 2 mtr interval met in boring including strata chart in duplicate complete all as specified and directed.

M&L for carrying chemical / bacteriological analysis and potability test of water obtained from bore well from Govt approved lab or department of Atomic Energy, Board of Radiation & Isotope Technology, BARC/BRIT, Vashi Complex Sector 20 ,Navi Mumbai 400703 / or as approved by GE Miicro Engineering and testing lab and submitting the report in duplicate to Engr-in-charge, complete all as specified and directed. The testing parameter and unit given in PS. a) Arsenic (as As) mg/l b) Cadmium as hexavalent Cd) mg/l c) Chromium (as CN) mg/l d) Cyanides (as CN) mg/l e) Led (as Pb) mg/l f) Selenium as Se) mg/l g) Mecury (as Hg) mg/l h) polynuclear aromatic hydrocarbons (PAH ) ug/l j) Pesticides (as total) mg/l k) Silver as (ag) mg/L l) Nickle as Ni (mg/L m) Ammonia as nh3 (mg/l) Item Continued as 14.33

n) Barium as Ba (mg/l) o) Boron as B (mg/l) p) E Coli/100 ml q) Total Coliform Bacteria /100 ml r ) Gross Alpha content s) Gross Beta content t)Turbidity u)Colour v) Ph w)Total Dissolved Solids (TDS) x)Total Hardness (as CaCo3) y) Chloride (as Cl) z)Sulphate (So4) aa) Fluorides (as F) ab) Nitrates (as NO3) ac) Calcium (as Ca) ad) Magnesium (as Mg) ae) Iron (as Fe) af) Copper (as Cu) ah) Aluminium (as Al) aj) Alkalinity ak) Zinc (as Zn) al) Phenolic Compounds (as MBAS) am) Mineral Oil an) Taste ao) odour ap) Anionic detergents as MBAS (mg/l)

Supply, lowering, jointing & testing MS Black column pipe 3.0 mtr long, heavy duty, 80 mm bore, wall thickness 5.4 mm, both ends flanged, ISI Marked with heavy duty MS flanges not less than 20 mm screwed & welded inside & outside with pre-drilled holes including jointing with rubber gasket, nuts, bolts, washers & necessary grooves for facilitating submersible cables, steel ropes etc. The pipe shall be duly painted with anti-corrosive paint suitable for drinking water purpose complete all as specified and directed.

S&F flat submersible cable 3 core 1100 volt grade multi stranded copper conductor PVC insulated, water proof, ISI marked of size 6 sqmm for connecting from starter to bore well submersible pump sets complete all as specified and directed.

S&F bail plug of 150 mm internal dia threaded of minimum thickness 6 mm and 3 mtr long made up of mild steel and continuous welded by electric arc welding at both ends with and including all connected acessories complete all as specified and directed.

S&F chain pully block, triple spur gear, 2 ton capacity with 3 meter lift, manually operated complete with hooks high tensile forged steel confirming to IS : 3815 and load confirming to IS: 6216 and hand chain conforming to IS: 2429 (Part-I) with and including all connected acessories complete directed.

S&F steel rope flexible 10 mm dia with GI clamps, nuts, bolts, washer etc for fixing of submersible pump set with and including all connected acessories complete all as specified and directed.

M&L for MS Taper reducer of 200 x 150 mm with and including socket threaded and by electric arc welding both sides with and including all connected acessories/fittings complete all as specified and directed.

S&F mild steel clamp of required length bend to shape suitable for 80 mm dia MS column pipe made out of 12 mm thick MS plate fabricated to shape, including drilling holes, nuts, bolts, washers with and including all connected acessories/fittings complete all as specified and directed.

M&L for fabricating of MS nipple 0.6 Mtr long 80 mm dia threaded both side externally. Flanged one end with heavy duty flange drilled four holes and provision of groove for cable entrance system with and including all connected acessories/fittings complete all as specified and directed.

Supply, jointing, testing and laying in trenches/floor/wall etc in standard lengths, Centrifugally Cast (Spun) Ductile Iron (DI) Pressure Pipes 150 mm dia with Spigot & Socket end, Class K-9 conforming to IS: 8329/2000 and upto latest amendment, suitable for (push-on) rubber gasket jointing with inside cement mortar lining and outside zinc coating with finishing layer of Black Bitumen/Blue Epoxy coating, ISI marked including push on rubber gasket joints complete all as specified and directed. NOTE : (i) DI specials/ fittings will be measured and paid separately under relevent items of Schedule. (ii) The cost of push on type joint deemed to be included in the rate quoted.

All as per Srl Item No. 14.42 here-in-before but for 100 mm dia complete all as specified and directed.

Supply and dozing Chlorine tablets contained in plastic cylindrical sealed disposable sanitiser refill for disinfection of drinking water with arrangement for controlled release of disinfectant in water, suitable for operation through recommended dosing system complete and connected acessories as per approved OEM recommendation complete all as specified and directed. Replacement indication: visual & weight variation Water contact orifice design: Sealed when dry, exposed upon immersion. Operation type: Non contact, non inhalatory. Cylinder dia: 2.5 inches ± 0.5 inches Cylinder height: Minimum 10.0 inches ± 0.5 inches

Supply only CHLORINE TEST KIT with coloured sample with test-tubes complete with all testing fitments , OT solution in Rexene finish box with and inculding all connected acessories/items as per approved OEM recommendation complete all as specified and directed.

Supply only PH test kit with coloured sample covered under BTB (range 6.0 to 7.0) or phenol red (range 6.8 to 8.4) , test-tubes with necessary fitments wiith a nd including 100 ml testing solution in rexene finish wooden box and connected acessories/items as per approved OEM recommendation complete all as specified and directed.

Supply only IRON Test Kit & test-tubes with and including necessary fitments and testing solution in rexene finish box and connected acessories/items as per OEM recommendation complete all as specified and directed.

Supply, installation, testing and commissioning multi stage submersible pump set with bronze impeller, directly coupled with motor, suitable for 250 mm bore well water lubricated against minimum total head 45 meter and discharge minimum 600 LPM operated on AC 3 phase, voltage range 200V-440V, 50 Hz. The motor casing shall be of stainless steel, pump shaft/ motor shaft shall be of stainless steel, pump bowls shall be of high graded cast iron complete all as specified and directed. The pump and motor shall comply to all the requirements of relevant IS. NOTE : (i) The pump size, i.e head and discharge mentioned is minimum required at site, however, the actual size shall be arrived after doing necessary yield test.(ii) Slection of pump discharge to be finilised base on yield test report of bore.Before procurement of pump contractor has to submit the specification of submersible pump and make and take approval of GE. . HP of pump shall be calculated according to pump discharge and head (iii) The submersible pump set should be guaranteed for all defects for 02 year. In case of burn out within two year the same shall be replaced with new motor complete all as specified and directed.. (iv) Submersible pump shall have brass impeller and sufficient stage to suit the required head.

Supply, installation, testing & commissioning of Air release valve, Cast iron, double air outlet, flanged ends,conforming to IS- 14845, 80 mm bore connected to the main line including all jointing materials as required complete all as specified and directed.

M&L for construction of brick masonary valves pit of internal dimensions 900mm x 900 mm x 900 mm complete and fabrication of 3.0 mm thick MS Sheet cover and angle iron frame made out of 40mm x 40mm x 6 mm MS angle iron and one side provided with hinge with locking arrangement & duly painted with two coats of black bituminous paint over a coat of red oxide primer including necessary earth work and PCC work complete all as specified and shown TD Drawing.

M&L for construction of brick masonary valves pit of internal dimensions 600mm x 600 mm x 600 mm complete and fabrication of 3.0 mm thick MS Sheet cover and angle iron frame made out of 40mm x 40mm x 6 mm MS angle iron and one side provided with hinge with locking arrangement & duly painted with two coats of black bituminous paint over a coat of red oxide primer including necessary earth work and PCC work complete all as specified and shown TD Drawing.

Supply, installation, testing and commissioning of Altoch (Chlorine) Dosing System consisting of :- (a) Receptacle for power-free automatic water sanitizer / conditioning treatment station with proportional dosing arrangement with following attachments: (i) Water Inlet Regulator (ii) Overflow Vent (iii) Water Outlet Regulator (for standalone gravity flow) (iv) Water Outlet Regulator (for offline automated gravity flow) (v) Drain valve (vi) Fluid Level controller (vii) Sludge Level Guage (viii) Station Base Assembly with Station Base Buffer (ix) Station Hood Assembly with multi-cavity arrangement (13) (x) Station Holding Assembly Material of construction: Non-metallic thermoplastic, Maximum Temperature: 45°C, Capacity: 100 litres,Shape: Cylindrical Item Continued as 14.53

Supplying, assembling, jointing & fixing in position MS ERW pipe fine cut of internal dia 200 mm bore 2.0 Mtr long of thickness 5.4 mm confirming to IS 4270-2001 (ISI marked) both side flanged and covered with suitable dummy cover including electric arc welding both sides all as specified for header to make branch connections including painting, the pipes with single coat of epoxy primer and two coats of red enamel paint all as specified and as directed.

M&L for fittings ISI marked of size 80 - 200 mm bore suitable for DI pipes class K-12, PN 10, as per IS: 9523 / 2000 with inside cement mortar lining andoutside Zinc coating with finishing layer of Black Bitumen, such as bends (any type radius & angle) tapers, tee pieces, single branches, Y junctions, double junctions, connecting pieces, Nuts & bolts, gaskets, flanges, including push on rubber joints etc. complete all as specified and directed.

Supply, installation, testing and commissioning of indoor cubical type LT Control Board, factory fabricated CPRI type tested with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-43 & general construction confirming to IS-13947, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming MCCB rating. The panel board shall be fabricated out of 2.0 mm thick CRCA sheet duly pre-treated & powder coated, supporting frame made out of 50 x 50 x 6 mm angle iron suitable for 3 Ph, 4 wire system 415/440 volts grade incl complete internal wiring with not less than 2.5 sqmm copper wire including cable glands of suitable sizes including PCC platform/plinth of suitable size complete all as specified and directed including following accessories :- Item Continued as 14.57 to 14.58

BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos tinned copper 100 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections form main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry/exit shall be provided in the bottom for both incomming & out-going cables. INCOMING (a) MCCB 4P (Ics = 100% Icu) with adjustable thermal magnetic release, having breaking capaity 16 KA of rating 32 A - 01 No. OUTGOING/INSTRUMENTATION SYSTEM : (a) MCCB, 3 Pole, 32 Amp rating, (Ics = 100% Icu) with adjustable thermal magnetic release, having breaking capaity 16 KA - 02 Nos. (b) MCB, SPN, 10 Amp rating,having breaking capaity 10 KA - 01 No. (c) Fully Automatic Panel mounted open execution star-delta starter suitable for 25 HP induction motor, 415 volts, including overload relay, auto timer & single phase preventer etc complete -02 Nos

Supply, design,Installation, testing and commisioning of Iron Removal/water treatment Plant of capacity not less than 45 Cum/Hr (10000 GPH) must be tested & approved from govt agencies for iron content upto 20 ppm . The Iron removal technology shall be capable to remove iron up to 20 ppm from water and the CSIR test report or govt approved agencies shall be furnished. complete to achive the permissible parameters of of treated water consisting of 01 set multi grade filter, 01 set Oxidation Chamber, 01 Set of Chemical Dosing System for Soda Ash, 01 Set of Chemical Dosing System for Sodium Hypo-chloride. The plant including all interconnecting piping valves and other connected accessories with and including necessary internal cabling, termination support stays, clamps, inlet & outlet pipe connection for filtration and back wash and other connected items including motorized (3 phase 415 V AC) Air compressor of suitable capacity for Aeration purpose as per OEM recommendation confirming to relevant IS, foundation works as per OEM design. The plant to be painted with Two coats of non-toxic anti-corrossive epoxy paint (suitable for drinking water quality) inside and two coats of synthetic enamel over a coat of red oxide primer in exposed surfaces complete comprising of the followings :- Item Continued as 14.60 to 14.63

M&L for disconnecting the existing pipe line up to 150 mm bore i.e GI/CI/DI pipes ,suction and delivery of any type from the pump set/ Existing pipe over / under ground and supply and fixing new pipe given in schdule including cutting, welding or lead or any other types joint nominal dia up to 150 mm joints complete for delivery and side including necessary nuts bolts , welding works and rubber etc and other connected fittings , complete all as specified and directed.

FIRE FIGHTING & FIRE ALARM SYSTEM S&F XLPE insulated heavy duty FRLS copper ammoured conductor 2.5 Sqmm 6 Core, with working voltage 1100 volts conforming to IS: 1554 Part-I complete all as specified and directed. (From Control panel to Jockey pump)

Supply, installation, testing and commission of dry chemical powder (ABC) type fire extinguisher not less than 6.0 Kg capacity with EPDM Hose stainless steel pin conforming IS 15683 and IS marked having high quality pure polyester powder coating, controlled discharge, brass nickel plated head valve nozzle conforming to IS 4947 with simple squeeze operation, with and including all connected acessories as per OEM recommendation complete all as specified and directed.

Supply, installation, testing and commission of dry chemical powder (ABC) type fire extinguisher not less than 9.0 Kg capacity with EPDM Hose stainless steel pin conforming IS 15683 and IS marked having high quality pure polyester powder coating, controlled discharge, brass nickel plated head valve nozzle conforming to IS 4947 with simple squeeze operation, with and including all connected acessories as per OEM recommendation complete all as specified and directed.

S&F light weight squeeze grip type CO2 fire extinguisher not less than 4.5 Kg capacity LIGHT WEIGHT ALUMINUM BODY as per IS: 15683 complete with delivery hose horn, wheel type release valve, locking arrangement, operation manual and bracket. Operating Temperature:- 30ºC to +60ºC with and including all connected acessories as per OEM recommendation complete all as specified and directed.

S&F light weight squeeze grip type CO2 fire extinguisher of 3.0 Kg capacity LIGHT WEIGHT ALUMINUM BODY as per IS: 15683 complete with delivery hose horn, wheel type release valve, locking arrangement, operation manual and bracket. Operating Temperature:- 30ºC to +60ºC with and incluiing all connected acessories as per OEM recommendation complete all as specified and directed.

S&F Fire Extinguisher Water Stored Pressure Type 9.0 Ltr capacity BIS standard complete with delivery hose sqeeze grip release valve , locking arrangement , pressure gauge operation manual and bracket, operting temperature +5C to 60 C complete all as specified and directed.

S&F mechanical foam stored pressure type fire extinguisher of 9 litre capacity with AFFF Foam confirming to IS 4989(Part I) with EPDM Hose & air aspirated nozzle, external pure polyester powder coated (UV Resistant) and internal plastic lining, brass forged Valve with safety pin is of Stainless steel material, sheet metal thickness 2 mm as per IS 15683 and IS Marked, with and including all connected acessories as per OEM recommendation complete all as specified and directed.

S&F Fire Extinguisher Dry Chemical Powder Type Trolley mounted 25 Kg capacity as per IS-16018 with and including all connected acessories as per OEM recommendation complete all as specified and directed.

S&F Fire Extinguisher Low/high pressure Water Mist and CAF Fire Extinguisher, trolley mounted, as per EN: 3-7, Pressure Vessel : PESO of 50 Ltrs capacity with and including all connected acessories as per approved OEM recommendation complete all as specified and directed.

S&F auto-illuminated (glow-in-dark) exit sign board with red colour background with appropriate symbol, made up of acrylic sheet for fire escape in minimum 10 cm x 30 cm size to be pasted on wall with high quality adhesive or to be hanged with s.s. hook-chain system with and including all connected acessories as per approved OEM recommendation complete all as specified and directed.

S&F rechargeable type ceiling/wall mounted Escape lighting showing exit sign in green colour provided with in-built battery suitable to provide minimum 90 min contineous lighting after power cut with and including all connected acessories as per OEM recommendation complete all as specified and directed.

S&F Galvanised Iron Fire bucket 9 ltr Red in colour heavy duty with and includiing all connected acessories as per OEM recommendation complete all as specified and directed.

Supply,designing ,install, testing & commissiong of indoor cubical type LT Control Board, factory fabricated CPRI type tested having certification of IEC-61439 with suitable neoprene rubber gasket to make it completely dust & vermin proof with anticorrosive coating and finally epoxy polyester power coating with pure polyster Siemens grey structural RAL-7032 shade having degree of protection not less than IP-43 & general construction confirming to IS-13947, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & tinned copper bus-bar wrapped with coloured PVC tape/sleeves of rating in conformity to the Incoming MCCB rating. The panel board shall be fabricated out of 2.0 mm thick CRCA sheet duly pre-treated & powder coated, supporting frame made out of 50 x 50 x 6 mm angle iron suitable for 3 Ph, 4 wire system 415/440 volts grade including complete internal wiring with not less than 2.5 sqmm copper wire including cable glands of suitable sizes incl PCC platform/plinth of suitable size with and including all connected acessories as per OEM recommendation complete all as specified and directed. including following accessories for Terrace Pump :- Item Continued as 14.78 to 14.79

BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos tinned copper 100 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections form main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry/exit shall be provided in the bottom for both incomming & out-going cables. INCOMING (i) MCCB FP, 63 Amps rating, Ics=100%Icu, 16 kA breaking capacity, adjustable thermal magnetic release - 01 No OUTGOING/INSTRUMENTATION SYSTEM : (i) MCCB FP, 40 Amps rating, Ics=100%Icu, 16 kA breaking capacity, adjustable thermal magnetic release - 02 Nos (01 Spare) (iii) MCB SPN 10 Amps, 10 kA - 01 No and SP 6 Amps, 10 kA - 01 No (iv) Fully Automatic Panel mounted open execution star-delta starter suitable for 7.5 HP induction motor for Terrace Pump,450 LPM, 415 volts, including overload relay, auto timer & single phase preventer etc complete -01 No (v) Auto Control System for Start/Stop of Terrace Pump controlled through pressure switch (paid separately) and other switching control from Fire Control Panel with necessary microproceesor controlled relay etc - 01 Set

EXTERNAL ELECTRIFICATION Design, manufacturing, supply, installation, testing and commissioning of 3 way 12 kV rated Ring Main Unit of and LT Fault Level 21KA , consisiting of 630A 12 kV rated , 1 nos load break switches as incomers & 2 nos motorized type VCB as outgoings with metering modules along with necessary Earth Switches, battery and battery charger for shunt trip arrangement and Motor and other auxiliary circuit operation, HT Copper Bus bar as per detailed description as follows: MAKE : Schneider/ABB/Siemens/equivalent. Item Continued as 14.81 to 14.94

RMU Construction: The switchgear and busbar shall all be contained in a stainless steel enclosure filled with SF6 at 0.3 bar (300 hPa) relative pressure to ensure the insulation and breaking functions. Sealed for life, the enclosure shall meet the "sealed pressure system" criterion in accordance with the IEC 62271-1 standard (§ 3.6.5.4): "a volume for which no further gas processing is required during its entire expected life”. In addition, manufacturer shall confirm that maximum leakage rate is lower than 0,1 % / year. It shall provide full insulation, making the switchgear insensitive to the environment (temporary flooding, high humidity...), IP67 degrees of protection in accordance with recommendation IEC 60529 § 14.2.7. Thus assembled, the active parts of the switchgear shall be maintenance-free and the switchboard shall be low-maintenance. The switchboards drives shall have an IP2X protection index. The tank shall be made of at least 2mm unpainted stainless steel. SF6 gas is the preferred dielectric medium for MV RMUs. Oil filled switchgear will not be considered. SF6 gas used for the filling of the RMU shall be in accordance with IEC 60376.Any accidental overpressure inside the sealed chamber will be limited by the opening of a pressure limiting device in the lower part of the enclosure. Gas will be released to the rear or the bottom of the switchboard away from the operator. Number of mechanical operations of Circuit breaker 2000 O/C , Number of electrical operations at full loop current for LBS: 100 O/C , Number of electrical operations at full loop current for CB: 2000 O/C,. Manufacturer shall provide type test report to prove compliance with IEC 62271-200 Annex A, Internal arc classification class AFL with 21kA 1s for the SF6 enclosure. Make of the RMU, vaccum intrtupter , relay & meter shall be of same OEM. All the test certificate shall be in the name of the OEM only . If there is any name change / acquisition by other OEM happened for the RMU then test cerificates shall contain the new OEM name only.

HT system : HT system : 3 phase -3 wire , HT Fault level 21 kA, Power System earthing - solindly earthed at up stream source, HT Copper Bus with Short Time Curent rating 21 kA for 1 Sec ( 3Sec), Continuous current rating at least 630 A. Enclosure of RMU must be IAC rated for 21 kA for 1 Sec. Design ambient to be considered as 40 Deg C. HT Circuit Breaker : i) There shall be 1nos.load break switches as incomings and 2 nos 12 kV rated VCB as outgoing ( total 3 nos.) . The circuit breakers shall be horizontal isolation - horinzontal draw out type. All of the switchgear shall be capable of withstanding this current without any damage being caused, in accordance with the recommendations IEC 62271-1 and IEC 62271-200.Loss of service continuity class: LSC2A.

ii) The Circuit Breaker must be rated for 12 kV ( nominal Voltage), 28 kV/75 kVp , 3 Phase, 50 Hz, Short Circuit Fault Level of 21 kA for 1 secs. Iii) No. Of Close Coils - 01 no. operable at 24 V DC (85% - 110%) , No. of Trip Coils - 02 nos. , operabale at 24 V DC ( 70% - 110%) for shunt trip Feature for series trip shall also be enabled. iv) Provision for supervision of the two indepandent Trip Circuits for the two Trip Coils to be provided. v)Switchgear classification: PM class vi) Loss of service continuity class: LSC2A

vii) Duty Cycle : O – 0.3sec – CO – 3min – CO, Vacuum Circuit breaker shall be of M2, E2, C2 duty and capable for minimum 100 short circuit breaking operation at full short circuit level. viii) STC rating 21 kA for 1 Sec (for Vacuum Interrupter). ix)Vacuum Interruptor must be hermetically sealed and must comply IEC 60056 ( along with latest amendments). x)Circuit Breaker to be equipped with Suitable tripping arrangement with push button, Mechanical counter to assess the total number of operations of the breaker, Mechanical ON / OFF indicator, Auxiliary switches, Auxiliary Contacts( at least 2 NO + 2 NC of Class 2 category), Emergency trip push button. xi) The Operating mechanism shall be spring charged motor operated type with Spring Charge Universal motor operable on 24 V DC / 230 V AC.

xii)Suitable monitoring of Circuit Breaker status ( ON, OFF, Trip, CB Spring Charged) , Trip Circuit Healthy / Unhealthy, DC healthy/unhealthy to be provided using IoT based online monitoring system using microprocessor / digital RTU with historical data saving, capable of updating status and sending alarm signal on IoT monitoring unit, GSM and GPRS platform through which live monotoring status and equipment reading and fault related history can be accessed by user remotely. xiii) Voltage Presence Indicator shall be provided against each HT circuit ( against each VCB) on line side for knowing the presence of line enerzisation status. xiv)Number of Mechanical operations at full rated current for breaker: 2000 O/C.

HT CT /PT i) One set of 03 nos. ( for 3 phases) dual core Cast Resin CTs for Each incomer VCB complying with IEC:60185 & IS 2705 ( along with latest amendments) , Core -1 - 400-200/1 A , 15 VA, Cl 0.5 for metering ; Core-2 - 400-200/1 A, 15 VA , 5P10 for Protection. ii) 01 no. of 03 phase Dual Core PT for HT bus ( 11 kV) with protection HRC fuse Core 1- 11kV-6 kV /√3 / 110V/√3, Cl 0.2s, 100VA Core 2- 11kV- 6 kV /√3 / 110V/3, Cl 3P, 50VA

Multifunction Meter iii) 2 Nos. 3 phase Digital Multifunction Meter 6400NG with Voltage, Amps, kWh, kW, P.F., Active, reactive, apparent energy , disturbance direction detection, Individual harmonic up to the 63rd harmonic. at least 256 samples/cycle with ethernet Port with inbuilt webserver and complying to IEC 61557-12, IEC 62053-22 certified by third party laboratory.for each VCB panel ( 96 mm x 96 mm) , Flush mounted, Class 1 conforming to IEC 62053-22 ( along with latest amendments) .

ii) Master Trip Relay : High Impedance and High speed relay flush mounted having coil cut-off contact with at least 4NO and 4NC contact and electrical reset facility capable to make, carry and break trip coil current of Circuit Breaker and capable for future integration with SCADA. iii) Each VCB must have separate Anti Pumping Relay.

Fault Passage indicator: The FPI shall facilitate quick detection of faulty section of line. The fault indication may be on the basis of monitoring fault current flow through the device. The FPI should be self-powered and should have internal lithium battery for external indication and setting of FPI in the absence of current. The FPIs shall include: Fault detection - Phase to phase and Phase to earth faults. One potential-free output contacts for hardwiring to RTUs. On this basis, the SCADA/DMS will be able to monitor phase / earth fault condition. Local fault indications - LCD display on FPI front panel along with LED indication on front panel of RMU enclosure.

Multiple reset option – End of time delay (Adjustable from 2 to 16 Hrs) Remote reset (Via potential free input contact of FPI) Manual reset (Reset button on front panel of FPI) Automatic reset on current restoration. The characteristics of the FPIs shall include: Phase fault thresholds configurable from at least 100 to 800 A Earth fault thresholds configurable from at least 20 to 200 A Multiple number of steps for adjusting phase and earth fault thresholds. Fault current duration range configurable from at least 40 ms to 100 ms in 20 ms steps and further 100 ms to 300 ms in 50 ms steps. Variations with respect to these characteristics may be acceptable as long as they prove applicable and provide the same or better flexibility.

Earthing The cables shall be earthed by an earthing switch with short-circuit making capacity, in compliance with IEC 62271-102 standard. The earthing switch can only be operated when the switch is open. The switch and earthing switch operating mechanism shall have a mechanical endurance of at least 1000 operations. Separate line side Earth switches shall be provided in each HT Circuit ( against each VCB).

RMU Bushing & Cable termination: It is preferable to have all bushings accessible from the front of the RMU. Bushings along the sides or the rear of the RMU are not acceptable. For each cable compartment, the bushing shall be at the same height in order to facilitate a possible reversal of the cables The bushing should be conveniently located for working with cables specified and allow for the termination of these cables: -630 A M16 bolted connectors for switch-disconnectors and vacuum circuit breakers functions.The profiles of the cable connection bushings shall be in compliance with IEC-60137 standard. Cable clamps:A cable clamp arrangement must be provided for all network cables terminated on the RMU.

Provision for Cable Entry: There shall be suitable provsion for Cable entry from bottom through 3 mm thick CRCA steel thick detachable gland plate along with provision for termination of 2 runs of 3 c X 300 Sq mm 11 kV (E ) , XLPE insulated Aluminium Cables ( for HT side) and at LT side runs of cables matching with outgoing MCCB current rating.

Design, manufacturing, supply, installation, testing and commissioning Automatic Power Factor Correction (APFC) System with capacitor heavy duty, type MD-XL , 440 V with output capacity 60 KVAR, capacitor bank shall be 5 Step in steps ((2X5 KVARr+1x10KVAR+1x15 KVARr+1x25KVAR) (each set coupled with each portion of LT panel ) and configuration to accommodate all possible set of automatic operation to maintain 0.99 power factor. Outdoor type self supported front and rear openable double door hinged type with locking arrangement, suitable ventilation on both sides with wire mesh, dust and vermin proof, fabricated out of 3.15 mm CRCA sheet, powder coated with chemical process, mounted / fixed on and including MS angle iron stand / frame 40 cm height above FFL with angles of size 50 x 50 x 6mm duly painted with black synthetic enamel paint over a coat of red oxide primer, PCC 1:3:6 type C1 foundation for grouting angle frame, control wiring with copper stranded conductor PVC insulated FRLS cables not less than 1.5 Sqmm, suitable size / capacity of copper strips for switch gear connection from main bus bar, Capacitor panel controlled by an intelligent microprocessor based PF correction relay with MCCB/MCBswith thermal magnetic release and adjustable overload Setting and short circuit protection and Ics=100% of Icu and MCCBs shall have roto active double break mechanism along total break time less than equal to 10ms with Spreader terminal of both side of required capacity with required numbers and suitable ratings as per the capacity of the capacitors, Power Contactors heavy duty for suitable capacitors shall be provided for automatic operation of each capacitors with ON / OFF indications. Power Factor Capacitors shall confirm to IS 13340,13341,IEC 60831. The capacitors shall be suitable for 3 Phase 440 volts,50 Hz suitable for indoor use up to 55 deg C, fitted with discharge register with standard discharge timing 60 Sec as per IS. Item Continued as 14.96

Design, manufacturing, supply, installation, testing and commissioning Automatic Power Factor Correction (APFC) System with capacitor heavy duty, type MD-XL , 440 V with output capacity 150 KVAR, capacitor bank shall be 5 Step in steps ((2X12.5 KVARr+1x 25 KVAR+2x50 KVAR) ( each set coupled with each portion of LT panel ) and configuration to accommodate all possible set of automatic operation to maintain 0.99 power factor. Indoor type self supported front and rear openable double door hinged type with locking arrangement, suitable ventilation on both sides with wire mesh, dust and vermin proof, fabricated out of 3.15 mm CRCA sheet, powder coated with chemical process, mounted / fixed on and including MS angle iron stand / frame 40 cm height above FFL with angles of size 50 x 50 x 6mm duly painted with black synthetic enamel paint over a coat of red oxide primer, PCC 1:3:6 type C1 foundation for grouting angle frame, control wiring with copper stranded conductor PVC insulated FRLS cables not less than 1.5 Sqmm, suitable size / capacity of copper strips for switch gear connection from main bus bar, Capacitor panel controlled by an intelligent microprocessor based PF correction relay with MCCB/MCBswith thermal magnetic release and adjustable overload Setting and short circuit protection and Ics=100% of Icu and MCCBs shall have roto active double break mechanism along total break time less than equal to 10ms with Spreader terminal of both side of required capacity with required numbers and suitable ratings as per the capacity of the capacitors, Power Contactors heavy duty for suitable capacitors shall be provided for automatic operation of each capacitors with ON / OFF indications. Power Factor Capacitors shall confirm to IS 13340,13341,IEC 60831. The capacitors shall be suitable for 3 Phase 440 volts,50 Hz suitable for indoor use up to 55 deg C, fitted with discharge register with standard discharge timing 60 Sec as per IS. Item Continued as 14.98

Supply only Electrical gloves 440 V to 36 KW working voltage, Material body Latex, Yellow colour, Full Fingered, 16-20 Inch long complete all as specified and directed.

S&F HT/LT made up of PCC block (1:3:6) type. C-1 using 20mm graded stone aggregated of size 900 mm x 300mm x 100 mm thick (45 Cm burried in ground) and properly painted as per approved colour Brown/Blue (HT/LT) and written both side with signed red colour paint ( HT cable 11 KV or LT cable 1100 Volts) on Cable route marker including necessary excavation and earthwork complete all as specified and directed.

S&F 8.0 Mtr Long Hot Dip Galvanised Street Light Octagonal Pole with Foundation type Base Plate and Foundation Bolts and additional structural steel as reqd, dimentions of Pole as Top Diameter - 70 mm, Bottom Diameter- 130 mm, Section Length - 8000 mm, Thickness - 3 mm, Foundation type Base Plate (200 x 200 x 16 mm), Foundation Bolts - 4 Nos 20 mm dia, pitch circle dia 200 mm, bolt length 600 mm, projects bolt length 100 mm , with Single type arm bracket 1500 mm long , top dia 70 mm , suitable for LED Street Light fitting. The Pole shaft shall have octagonal cross section and continuously tapered with single longitudinal welding with and including all accessories as per OEM recommendation complete all as specified and directed.

S&F factory fabricated (CPRI type tested) weather proof, dust & vermin proof street light junction box of size 250 (L) x 250 (B) x 150 (D) mm (minimum dimensions) made up of 3.15 mm thick CRCA sheet, powder coated after preparation of surfaces comprising of 04 Nos aluminium bus-bar of size 20 x 4 mm mounted on suitable size spacer insulators with provn of 01 No MCB SP 6 Amps, 10 KA breaking capacity, "C" curve & two openings at the bottom & one opening at the top with cable glands & fixing with the help of suitable sized MS clamps to steel poles including testing complete all as specified and directed.

Supply and lay PVC Insulated PVC sheathed LT cable unarmoured with stranded copper conductor of size 2.5 Sqmm x3 core drawn into steel pole for connection or security/street light fitting from junction box complete all as specified and directed.

Design,Supply, installation, testing and commissioning of out door type LT feeder piller box of suitable size, pedastal mounted,CPRI type tested having certification of IEC-61439 made totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15mm thick CRCA sheet, framing with 50 x 50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper looking amangement in both front and rear door with 4 side slanting canopy duly projected and painted to both internal and Extemal surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and induding following accessories and mounted on suitable PCC platform & necessary foundation complete with the following accessories complete all as specified and directed. Main Panel (Pocket 'A') Item Continued as 15.05 to 15.06

OUTGOING :- (a) MCCB Four pole of capacity not less than 160 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 25 KA with thermal magnetic release & lcs=100 % lcu -01No (b) MCCB Four pole of capacity not less than 32/40 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 16 KA with thermal magnetic release & lcs=100 % lcu -01 No. (c) MCCB Four pole of capacity not less than 16 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 25 KA with thermal magnetic release & lcs=100 % lcu -02 Nos (01 Spare) (d) Danger notice plate of size25 x 20 cm of 1.6 mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal-red color and fixed with MS clamp and bolt and nuts of approved size for LT conforming to lS:2551 complete-02 Nos.

Design,Supply, installation, testing and commissioning out door type LT feeder piller box of suitable size, pedastal mounted, CPRI type tested having certification of IEC-61439 totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15mm thick CRCA sheet, framing with 50 x 50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper looking amangement in both front and rear door with 4 side slanting canopy duly projected and painted to both internal and Extemal surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and induding following accessories and mounted on suitable PCC platform & necessary foundation complete with the following accessories complete all as specified and directed. Feeder Panel-1 Item Continued as 15.08 to 15.09

OUTGOING :- (a) MCCB Four pole of capacity not less than 125 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity not less than 16 KA with thermal magnetic release & lcs=100 % lcu -02 Nos (01 Spare) (c) MCCB Four pole of capacity not less than 16 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity not less than 16 KA with thermal magnetic release & lcs=100 % lcu -01 No (b) MCB TPN of capacity not less than 10 Amp breaking capacity 10 KA , 415 volts 50 C/S, AC-02 Nos (1 Spare) (b) MCB SPN capacity not less than 10 Amp breaking capacity not less than 10KA , 230 volts 50 C/S, AC-06 Nos (1 Spare) (c) Danger notice plate of size 25 x 20 cm of 1.6 mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal-red color and fixed with MS clamp and bolt and nuts of approved size for LT conforming to lS:2551 complete-02 Nos.

Design,Supply, installation, testing and commissioning out door type LT feeder piller box of suitable size, pedastal mounted, CPRI type tested having certification of IEC-61439 totally enclosed , dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15mm thick CRCA sheet, framing with 50 x 50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper looking amangement in both front and rear door with 4 side slanting canopy duly projected and painted to both internal and Extemal surfaces with powder coating paint in heat process of sheet as per OEM specification and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and induding following accessories and mounted on suitable PCC platform & necessary foundation complete with the following accessories complete all as specified and directed. Feeder Panel-2 Item Continued as 15.11 to 15.12

OUTGOING :- (a) MCCB Four pole of capacity not less than 25 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity not less than 16 KA with thermal magnetic release & lcs=100 % lcu -01 No (b) MCB TPN of capacity not less than 10 Amp breaking capacity not less than 10 KA , 415 volts 50 C/S, AC-02 Nos (1 Spare) (c) MCB SPN , 230 VOLTS capacity not less than 10 Amps rupturing cap 10 KA -5 Nos (01 Spare) (d) Danger notice plate of size25 x 20 cm of 1.6 mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal-red color and fixed with MS clamp and bolt and nuts of approved size for LT conforming to lS:2551 complete-02 Nos.

Design,Supply, installation, testing and commissioning out door type LT feeder piller box of suitable size, pedastal mounted, CPRI type tested having certification of IEC-61439 totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15mm thick CRCA sheet, framing with 50 x 50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper looking amangement in both front and rear door with 4 side slanting canopy duly projected and painted to both internal and Extemal surfaces with powder coating paint in heat process of sheet as per OEM specification and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and induding following accessories and mounted on suitable PCC platform & necessary foundation complete with the following accessories complete all as specified and directed. Feeder Panel for DG Set 1 Item Continued as 15.14 to 15.15

OUTGOING :- (i) MCB TPN of capacity 16 Amp breaking capacity not less than 10 KA , 415 volts 50 C/S, AC-01 No (ii)MCB TPN of capacity 10 Amp breaking capacity not less than 10 KA , 415 volts 50 C/S, AC-03 Nos (1 Spare) (iii) MCB SPN , 230 VOLTS 10 Amps rupturing cap 10 KA - 2 Nos (01 Spare) (iv) Astronomical Time switch -01 No with MCCB/MCB and suitable capacity contactor (Not less tha ML-2) for auto/manual operation- 01 Set. (v) Danger notice plate of size 25 x 20 cm of 1.6 mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal-red color and fixed with MS clamp and bolt and nuts of approved size for LT conforming to lS:2551 complete-02 nos

Design,Supply, installation, testing and commissioning in door type LT Panel of suitable size, floor mounted, CPRI type tested having certification of IEC-61439 totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 2.0 mm thick CRCA sheet, framing with 50 x 50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper looking amangement in both front and rear door painted to both internal and Extemal surfaces with powder coating paint in heat process of sheet as per OEM specification and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and induding following accessories and mounted on suitable PCC platform & necessary foundation complete with the following accessories complete all as specified and directed. Main Panel at Pocket 'B'. Item Continued as 15.17 to 15.18

OUTGOING :- (a) MCCB Four pole of capacity not less than 250 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity not less than 25 KA with thermal magnetic release & lcs=100 % lcu -01 No. (b) MCCB Four pole of capacity not less than 160 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity not less than 16 KA with thermal magnetic release & lcs=100 % lcu -02 Nos.(01 Spare) (c) MCCB Four pole of capacity not less than 125 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity not less than 16 KA with thermal magnetic release & lcs=100 % lcu -01 No. (d) MCCB Four pole of capacity not less than 63 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity not less than 16 KA with thermal magnetic release & lcs=100 % lcu -01 No (e) MCB SPN , 230 VOLTS 16 Amps rupturing capacity not less than 10 KA - 2 Nos (01 Spare) (f) MCB SPN , 230 VOLTS 10 Amps rupturing capacity not less than10 KA - 1 No (g) Danger notice plate of size25 x 20 cm of 1.6 mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal-red color and fixed with MS clamp and bolt and nuts of approved size for LT conforming to lS:2551 complete-02 Nos.

Design,Supply, installation, testing and commissioning out door type LT feeder piller box of suitable size, pedastal mounted, CPRI type tested having certification of IEC-61439 totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15mm thick CRCA sheet, framing with 50 x 50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper looking amangement in both front and rear door with 4 side slanting canopy duly projected and painted to both internal and Extemal surfaces with powder coating paint in heat process of sheet as per OEM specification and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and induding following accessories and mounted on suitable PCC platform & necessary foundation complete with the following accessories complete all as specified and directed. Feeder Panel-3 Item Continued as 15.20 to 15.21

OUTGOING :- (a) MCCB Four pole of capacity not less than 80 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 16 KA with thermal magnetic release & lcs=100 % lcu -01 No (b) MCCB Four pole of capacity not less than 63 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 16 KA with thermal magnetic release & lcs=100 % lcu -02 Nos(01 Spare) (b) MCCB Four pole of capacity not less than 40 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 16 KA with thermal magnetic release & lcs=100 % lcu -01 No (b) MCB SPN , 230 VOLTS 10 Amps rupturing cap 10 KA -4 Nos (01 Spare) (c) Danger notice plate of size25 x 20 cm of 1.6 mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal-red color and fixed with MS clamp and bolt and nuts of approved size for LT conforming to lS:2551 complete-02 nos

Design,Supply, installation, testing and commissioning out door type LT feeder piller box of suitable size, pedastal mounted, CPRI type tested having certification of IEC-61439 totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15mm thick CRCA sheet, framing with 50 x 50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper looking amangement in both front and rear door with 4 side slanting canopy duly projected and painted to both internal and Extemal surfaces with powder coating paint in heat process of sheet as per OEM specification and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and induding following accessories and mounted on suitable PCC platform & necessary foundation complete with the following accessories complete all as specified and directed. Feeder Panel-4 Item Continued as 15.23 to 15.24

OUTGOING :- (a) MCCB Four pole of capacity not less than 160 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity not less than 16 KA with thermal magnetic release & lcs=100 % lcu -01 No. (b) MCCB Four pole of capacity not less than 80 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity not less than 16 KA with thermal magnetic release & lcs=100 % lcu -02 Nos (01 Spare) (c) MCB SPN , 230 Volts, 10 Amps rupturing capacity not less than 10 KA -5 Nos (01 Spare) (d) Danger notice plate of size25 x 20 cm of 1.6 mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal-red color and fixed with MS clamp and bolt and nuts of approved size for LT conforming to lS:2551 complete-02 Nos.

Design,Supply, installation, testing and commissioning out door type LT feeder piller box of suitable size, pedastal mounted, CPRI type tested having certification of IEC-61439 totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15mm thick CRCA sheet, framing with 50 x 50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper looking amangement in both front and rear door with 4 side slanting canopy duly projected and painted to both internal and Extemal surfaces with powder coating paint in heat process of sheet as per OEM specification and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and induding following accessories and mounted on suitable PCC platform & necessary foundation complete with the following accessories complete all as specified and directed. Feeder Panel-5 Item Continued as 15.26 to 15.27

OUTGOING :- (a) MCCB Four pole of capacity not less than 125 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity not less than 16 KA with thermal magnetic release & lcs=100 % lcu -02 Nos.(01 Spare) (b) MCCB Four pole of capacity not less than 16 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity not less than 16 KA with thermal magnetic release & lcs=100 % lcu -01 No (c) Danger notice plate of size25 x 20 cm of 1.6 mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal-red color and fixed with MS clamp and bolt and nuts of approved size for LT conforming to lS:2551 complete-02 Nos.

Design,Supply, installation, testing and commissioning out door type LT feeder piller box of suitable size, pedastal mounted, CPRI type tested having certification of IEC-61439 totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15mm thick CRCA sheet, framing with 50 x 50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper looking amangement in both front and rear door with 4 side slanting canopy duly projected and painted to both internal and Extemal surfaces with powder coating paint in heat process of sheet as per OEM specification and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and induding following accessories and mounted on suitable PCC platform & necessary foundation complete with the following accessories complete all as specified and directed. Feeder Panel for DG Set 2 Item Continued as 15.29 to 15.30

OUTGOING :- (a) MCCB Four pole of capacity not less than 25 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity not less than 16 KA with thermal magnetic release & lcs=100 % lcu -01 No (b) MCB TPN of capacity not less than 16 Amp breaking capacity 10 KA , 415 volts 50 C/S, AC-03 Nos (01 Spare) (c) MCB TPN capacity not less than 10 Amp breaking capacity 10 KA , 415 volts 50 C/S, AC-03 Nos (01 Spare) (d) Astronomical Time switch -01 No with MCCB/MCB and suitable capacity contactor (Not less tha ML-2) for auto/manual operation- 01 Set. (e) Danger notice plate of size25 x 20 cm of 1.6 mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal-red color and fixed with MS clamp and bolt and nuts of approved size for LT conforming to lS:2551 complete-02 Nos.

Design,Supply, installation, testing and commissioning out door type LT feeder piller box of suitable size, pedastal mounted, CPRI type tested having certification of IEC-61439 totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15mm thick CRCA sheet, framing with 50 x 50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper looking amangement in both front and rear door with 4 side slanting canopy duly projected and painted to both internal and Extemal surfaces with powder coating paint in heat process of sheet as per OEM specification and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and induding following accessories and mounted on suitable PCC platform & necessary foundation complete with the following accessories complete all as specified and directed. Feeder Panel-6 Item Continued as 15.32 to 15.33

OUTGOING :- (a) MCCB Four pole of capacity not less than 125 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity not less than 16 KA with thermal magnetic release & lcs=100 % lcu -01 No. (b) MCB TPN capacity not less than 10 Amp breaking capacity 10 KA , 230 volts 50 C/S, AC-03 Nos (1 Spare) (d) MCB SPN , 230 Volts, 20 Amps rupturing capacity not less than 10 KA -2 Nos (01 Spare) (c) Danger notice plate of size25 x 20 cm of 1.6 mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal-red color and fixed with MS clamp and bolt and nuts of approved size for LT conforming to lS:2551 complete-02 Nos.

Supply and laying of HT overhead lines on existing poles with XLPE insulated AB (Arial bunched cable) conforming to IS7098 cable 3-core X 95 sq mm + 1 X 70 sq mm 9PT-ii0 -2011:IS 398 (Part-II) (Part IV) & IS 1830/8403 Cores standard compacted circular Aluminium conductor (Class 2 to IS 18130/2013) conductor shielded with extruded black semiconducting compound (part-2), followed by a layer of copper tape and over all sheathed with extruded black PVC (type ST2) complete all as specified and directed. 1. Bare messenger conductor -stranded compacted circular conductor with aluminium alloy wire IS398 part-4 2. Power core will be twisted around the bare messenger conductor.

MECHANICAL LAUNDRY Design,Supply, Installation, Testing & Commissioning Industrial Washer Extractor with inbuilt Hydro Extractor, High spin, Soft mount, front loading, Stainless Steel cabinet, Computer Controllled, Open Pocket, Fully Programable , minimum dry weight Capacity 30 kg, Electric Heated and all connected accessories as per approved OEM recommendation complete all as specified and directed. MAKE : Stefab India Ltd or equivalent make approved in Group 1 in any Command /ADG

Design,Supply, Installation, Testing & Commissioning drying tumblers, stainless steel cylinder Computer controlled reversible of minimum capacity 30 Kg Electric Heated with and including all connected acessories as per approved OEM recommendation through OEM as per Original Equipment Manufacturer's (OEMs) specification complete all as specified and directed. MAKE : Stefab India Ltd or equivalent make approved in Group 1 in any Command /ADG

SUMMER APPLIANCES Supply, installation, testing & commissioning of refrigerator, ISI marked electric driven , single phase having capacity not less than 235 ltrs or nearest higher size , frost -free smooth flow type seprate chill compartment with plastic shelves, Ice maker unit, vegetable/fruit drawer, body colour as approved with suitable lighting arrangement working with non-CFC refrigerant & 5 star rated including electric connection complete all as specified and directed.

Supply, installation, testing & commissioning of refrigerator, ISI marked electric driven , single phase having capacity not less than 310 Ltrs or nearest higher size , frost -free smooth flow type seprate chill compartment with plastic shelves, Ice maker unit, vegetable/fruit drawer, body colour as approved with suitable lighting arrangement working with non-CFC refrigerant & 5 star rated including electric connection with and including all connected acessories as per approved OEM recommendation through OEM as per Original Equipment Manufacturer's (OEMs) specification complete all as specified and directed.

Supply, Installation, testing and commissioning of copper wound voltage stablizer, ISI marked for automatic operation , single phase, naturally air cooled, indoor type & designed for I/P variation between 170 V to 260 V with O/P voltage stablization at 230 V with accuracy of +/- 2.5% with high & low voltage cut out & time delay & capacity not less than 01 KVA with and including all connected acessories as per approved OEM recommendation through OEM as per Original Equipment Manufacturer's (OEMs) specification complete all as specified and directed.

Supply, Installation, testing and commissioning of copper wound voltage stablizer , ISI marked for automatic operation , single phase, naturally air cooled, indoor type & designed for I/P variation between 170 V to 260 V with O/P voltage stablization at 230 V with accuracy of +/- 2.5% with high & low voltage cut out & time delay and capacity not less than 02 KVA including electric connection complete all as specified and as directed

CHHABINDRA KUMAR PRADHAN (BID ID -3476544)

Adhunik Infrastructures Pvt Ltd (BID ID -3475458)

M.P. SITANI AND SONS (BID ID -3476496)

ANUGRAH CONSTRUCTION PVT. LTD. (BID ID -3476364)

B D RAIZADA PROJCTS PVT LTD (BID ID -3475870)