Providing And Inatsallation Of 2000LPH RO Unit With Chiller, ATM Machine And Construction Of Tin Shed DISTRICT PRISON YAVATMAL

SUBWORK 1 - RO UNIT

Supply of R.O water purifier having capacity2000L/Hr working on both card and Coin system.Installation , Transportation , Loading ,Unloading ,Pipes , Accessories fitting

1) Raw water Pump 2000 LPH 2.0 HP 2) sand filter 16 Dia*65mm 3) carbon filter 16 Dia* 65mm 4) micron filter 5 mic 20" 5) high pressure pump 2000 LPH 3/4HP 6) electric panal 1-1 singal Phase 7) anti scalatant dosing pump 0 to 6 LPH 8) rota meter 0 TO 2400LPH 9) pressure guage 0 to7 kg/cm2 10) Membrane 80/40 ( 2 NO.) 11) Pressure vessel 80/40 12) high pressure switch 13) low pressure switch 14) flooty 15) UV System 2000 LPH 16) Pure Water Pump 0 .5 Hp

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of lowdensity polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow of all tank s capacity above 1000 to 20,000 litres PWD SSR 2022-23 PAGE NO.349

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of lowdensity polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow of all tank s capacity above 1000 to 20,000 litres PWD SSR 2022-23 PAGE NO.349

Water ATM Machine + Coin + card

ATM Card

Providing And Installation of 230/250V 50Hz chillar plant of 3 tone capacity with partially stainless steel body

Providing Water can having 18 ltr capacity (Cooling can)

Accessories

SUBWORK 2 - TIN SHED FOR RO UNIT

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.50 M.PWD 21-22 It.No. 21.01

Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling etc.complete.PWD 21-22 It.No 21.06

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping,compacting, roughening them if special finish is to be provided,finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With natural sand/V.S.I. quality Artificial Sand PWD 21-22 It.No24.01

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)PWD 21-22 It.No25.11

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite / gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)PWD 21-22 It.No 25.50

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying /pumping , compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)PWD 21-22 It.No

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. PWD 21-22 It.No 26.33

Providing second class Burnt Brick masonry with conventional/ I.S.type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete PWD 21-22 It.No 27.01

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)PWD 21-22 It.No 24.16

Filling in plinth & floors/trenches with Contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction etc. complete.PWD 21-22 It.No 21.36

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc.complete.PWD 21-22 It.No 21.37

Providing external cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. CompletPWD 21-22 It.No 32.06

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc.and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc.complete.PWD 21-22 It.No 23.01

Providing and fixing steel frame door of angle 50 x 50 x 6 mm with mild steel bars 16 mm dia. horizontally at 10mm c/c for ventilator portion including iron hold fast boxes for fixing shutters including welding, finishing, painting etc. complete.PWD 21-22 It.No 39.35

roviding and fixing M.S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etcPWD 21-22 It.No 39.31

Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.PWD 21-22 It.No 40.01

Providing and fixing 24 gauge plain aluminium sheet on the face of door shutter including cutting to required size and fixing the screws including making good the damages if any to existing door shutter and frame etc. complete as directed or as per detailed drawingPWD 21-22 It.No 39.62

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.PWD 21-22 It.No 33.42

Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.PWD 21-22 It.No 35.15

Providing and fixing colour coated Zinc alume(R)AZ150 (min150gms/sq.mt.total one achside ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45mm Base Metal Thickness (BMT) (0.5mmTCT) , Hi-strength steel with min.550MPa yield strength,metallic hot dipcoated with Aluminium-Zincalloy (55%aluminium 43.4%zinc1.6% silicon ) with COLORBOND(R) steel quality super durable polyester paint coat(with in organi cpigment).The paint shall have at otal coating thickness of nominal 35um,comprising of nominal 25 um exterior coat on top surface and nomina l10um reverse coat on back surface.Profile sheet shall have nom.950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five panat nominal180-250mm center-to-center.The end rib shall be designed for anti-capillary groove.and return leg.The feed material should have coil manufacturers product details marked a regular interval.Including fasteners with min.fastened with min.25umZinc-Tin alloycoated,Hexhead,self-drilling screw etc.complete. (weight of profile 4.52Kilogram/ Square Metre)PWD 21-22 It.No 38.34

SUBWORK III - PUMPING MACHINERY

Supplying and erecting minimum Three & above star rated submersible pump set of 0.75 KW/1 HP with 230 V, 50 c/s AC supply suitable for 100 mm dia. borewell suitable for 10 to 60 LPM discharge at 88 to 33 m head & discharge & delivery pipe of Size-32 mm diameter with a necessary H type clamps as per specification No. WP-SMP itemNO 12-2-33 ele csr 2022-23 1HP

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU PWD ELEC. 7-2-14

G.I.Bend ( As per description in MJP CSR)

Clam ( As per GSDA Approved rates)

Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .no.12-5-20 p.no.263 2017-18

Supplying and erecting high density polythene pipe ISI mark 32 mm dia. suitable for pressure of 6 kg/cm2 connected to jet/submersible pump with required material complete. PWD ELEC.16-5-16

SUBWORK IV - PROVIDING RISING MAIN

Supplying & errecting of HDPE pipe 32mm as per IS-4984 suitable for pressure 6 Kg/Cm2 connected to Submersible pump. (PWD electrical CSR 22-23 Item NO 16-5-16 page no. 261 (Basic Rate 57+5%)

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc.complete. MJP CSR 2021-22 I.No. 1/page No.35)

Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distace of 50 M and lifts as below,stacking and spreading as directed by Engineer-incharge,normal dewatering, preparing the bed for foundation and excluding backfilling, etc.complete.MJP CSR 2019-20 I.No. 1/page No.35) Bd-A-1/2590

Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below,stacking and spreading as directed by Engineer-incharge,normal dewatreing, preparing the bed for foundation and excluding backfilling, etc.complete. MJP CSR 2019-20 I.No. 1/page No.35) Bd-A-1/2590

Refilling the pipeline trenches with available exavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lift including consolidation, watering etc. completeMJP CSR 2019-20 I.No. 16 Page No.38

Add 18% GST

Name Board

Electrification Charges

Please Enable Macros to View BoQ information