PROVN OF SEWAGE LINES TO COMD CAMP, INTERLOCKING TILES NEAR BLDG NO P-146 AT NCCIU, ADDN/ALTN TO BLDG NO NP-14 AT COMD CAMP, BLDG NO NP-15 AT (I) WKSP EME UNDER GE (SOUTH) UDHAMPUR

Amount

Dismatling structural steel work including doors, gates etc. complete all as specified and directed.

Demolition of cement concrete any description and any position not otherwise specifically provided complete all as specified and directed.

75 mm thick PCC 1:4:8, type D-2 (by using 40 mm graded stone aggregate) as in sub base floor complete all as specified and directed.

25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate) as in level course on floor etc complete all as specified and directed.

10 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor complete all as specified and directed.

20-25 mm thick machine cut kota stone slab as in flooring, stair case and similar work over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per ser item No 6 here in before above but in vertical surfaces such as skirting/dado etc complete all as specified and directed.

Non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 on vertical surfaces/backing coat complete all as specified and directed.

Glazed ceramic coloured tiles of size 300 x 600 x 7 mm wall tiles set and jointed in neat cement and in white/coloured cement to match with the colour of tile etc complete all as specified and directed.

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members, frame etc complete all as specified and directed.

Providing false ceiling GI frame work for seamless ceiling comprising of GI perimerter channel 0.55 mm thick with two unequal flages of 20 to 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 452 mm C/C channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm C/c with GI cleat and steel expansion or sutable hanging from soffits\trusses\ bracking supporting hanger compressing of GI wire complete all as sepcified and directed by Engr-in-Charge.

4 mm thick 600 x 600 mm size asbestos cement plain E-boards designer ceiling (Make: Everest of equvalent), fixed to GI grid work with screws and applying new surfaces two coat of distempers and one coat of primers complete all as specified and directed.

50 mm thick PCC type C-1 1:3:6 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in alternate pannels finished even and smooth without using extra cement complete all as specified and directed.

Brick work with sub class B bricks, straight or curved on plan exceeding 6 m mean redius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster and raking out joints, hacking for key, scrubbing down with water built in cement mortar any description complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and directed.

Rendering 10 mm thick in cement mortar 1:6 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and directed.

Preparation of new plaster surface of walls and applying two coat of oil bound distempers over one coat of primer complete all as specified and directed by Engr-in-Charge.

Preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etc and applying two Coats of cement base paint over a coat of primer complete all as specified and directed.

Complete removal of existing treatment and applying two coats of oil bound distemper over a coat primers complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment applying two coat of cement base paint over a coat of primer paint on walls complete all as specified and directed by Engr-in-Charge.

Solid PVC door frame superior colour of size 50 mm x 47 mm made out of 5 mm plain color PVC sheet reinforced with with M.S square tube supplying and fixing in opening as per specification and drawing complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20 mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

All as per ser item No 26 here in before above but wire gauge shutters complete all as specified and directed.

Mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed.

Preparation of newly steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Pressed steel frames for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc complete as specified including a coat of shop coat zinc chrome primer complete size of frame 125 x 60 mm all as specified and directed.

35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type complete all as specified and directed.

Factory made 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. ( without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

Preparation of new wooden surfaces of any description, not other wise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed. (ISI Marked )

200 mm long Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

150 mm length Aluminium handles fabricated type anodised complete all as specified and directed.

300 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

300 mm ordinary rat rail rod pattern spring including roller and roller plate complete all as specified and directed.

3 mm thick glass sheet oridinary quality in steel or wooden frames complete with fixing materials such as putty, glazing pins, wooden beads etc. complete all as specified and directed.

Galvanished mild steel wire cloth 0.56 mm nominal dia of wire and average width of apperature 1.18 mm complete all as specified and directed.

Vitreous china ware wash down water closet pan, (pedestal pattern) coloured including connection to drain and to flushing pipe, anty syphonage pipe etc. complete all as specified and directed.

10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified and directed.

Plastic water closet seat black closed pattern with flat bottom and covered MS chromium plated or aluminised hinging device complete all as specified and directed.

WHB coloured 550 mm x 480 mm with Pedestal Make : CERA Cat Part No (S2040115 & S2090111) (as approved and complete all as specified and directed by Engineer-in-Charge.

CP Bib taps cast copper alloy with crutch or butterfly handle, screwed for iron pipe of dia 15 mm, fancy type fixed in repairs complete all as specified and directed.

CP angle valves cast copper alloy,fancy type, with long shank and cup, bore 15 mm, fixed in repairs complete all as specified and directed.

Soap-dish chromium plated (Approximate size 160 x 160 x 90 mm) complete all as specified and directed.

600 mm long tubular tower rail brass chromium plated 20 mm dia, D type 60 cm long fixed with two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws complete all as specified and directed.

Corner shelf of PTMT fixed with and including chromium plated brass screws and wooden and plastic clit complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipe 100 mm dia and below jointed in cement mortar and taking out of floor/walls etc.

110 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall complete all as specified and directed.

75 mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repair complete all as specified and directed.

75 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall complete all as specified and directed.

75 mm PVC (SWR) bends any redius with access door complete all as specified and directed.

PVC (SWR) gully trap 125/110 mm, settting and jointing with solvent cement in repair complete all as specified and directed.

Taking up or down GI tubing 15 mm dia complete all as specified and directed.

Taking up or down GI tubing 20 mm dia complete all as specified and directed.

Steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 15 mm bore complete all as specified and directed.

Steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20 mm bore complete all as specified and directed.

Rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 litres including all accessories complete all as specified and directed.

20 mm ball valve high pressure with polythylene float valve and fly nut complete screwed for iron pipe PTMT complete all as specified and directed.

Gun metal globe or gate valve 20 mm, with iron wheel head screwed both ends for iron pipe and loud in repairs complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation or manholes etc and area not exceeding 10 Sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete type D-2 (1:4:8) for 150 mm dia pipe complete all as specified and directed.

SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar (1:1) complete all as specified and directed.

Returning, filling in ,including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated soil to a distance exceeding 50 m and distance not exceeding 1.50 km about side defence land complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:4) as in manholes, septic tank, filter bed, walls, drains etc complete all as specified and directed.

Precast reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) for manhole cover septic tank covers slabs etc including necessary form work and set in cement mortar (1:4) complete all as specified and directed. Note :- reinforcement will be measured and paid seperately.

TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9 mm dia or securing with clips quality confirming complete all as specified and directed.

Dismentling AC (corrugated, semi corrugated) sheet as in roof covering complete all as specified and directed.

Dismentling timber scantlings 40 sq.cm and over in section, in any position complete all as specified and directed.

Demolition cement concrete in ground floors and paving (unreinforced) not exceeding 15 cm thickness (below or above ground floor) complete all as specified and directed.

Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pilars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Steel work in tubular trusses including special shaped washer etc.complete using ERW or induction butt welded tubes conforming to I.S.1161 1979 graded st -240 complete all as specified and directed

Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick crimpted/tapard at the external end slop of any colour having tansile strength 550 Mpa as in roof covering fixed with self tapping screws and caps etc complete all as specified and directed.

Plain galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick in ridges, hips, valley gutters at the external end slop of any colour having tansile strength 550 Mpa as in roof (ridges) covering fixed with self tapping screws and caps etc complete all as specified and directed.

Mild steel screw bolt (machine made) 11 to 15 mm dia with hexagonal or square heads at one end and screw the other, or screwed both end to be fitted with washers and one hexagonal or squre nut exceeding 10 cm & not exceeding 15 cm long complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm idth or girth and applying two coat of synthetic enamel paint over a coat of red oxide chrome primer complete all as specified and directed.

Screed bed or bedding layers of 15 mm thick cement mortar 1:6 for laying floor finishes complete all as specified and directed.

Backing coat of cement mortar 10 mm thick in 1:3 to receive tiles in vertical surfaces complete all as specified and directed.

25 mm thick PCC type B-0 (using 12.50 mm graded aggregate) as in sub base for receiving floor finishes complete all as specified and directed.

Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per ser item No 84 here in before but skairting/dado complete all as specified and directed.

Applying one coat birla wall care putty on old plastered on wall surfaces including preparation of surface by brooming down or steel wire brushing, scrapping down vegetation growth, efflorscent salts and trading with oil greasy spot complete all as specified and directed with complete removing.

Preparation of old plstered surfaces and two coats of distemper oil emulsion over a coat of primer surfaces of walls complete all as specified and directed.

Preparation of old plstered surfaces of celing and applying of one coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

Applying two coat birla wall care putty on new plastered on wall surfaces including preparation of surface by brooming down or steel wire brushing, scrapping down vegetation growth, efflorscent salts and trading with oil greasy spot complete all as specified and directed.

6 mm to 8 mm thick solid PVC lining/ pannelling fixed with rowel screws fixed over PVC slits grid of 5 mm thick fixed over wall so as to provide base for overleaping of lining and sealing the same at top and bottom if required at site complete all as specified and directions of Engr-in-Charge.

Taking down chowkats or frame with shutter (without taking of shutter off shutters from frame) 1.5 sqm not exceeding 4 sqm each complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking of shutter off shutters from frame) not exceeding 1.5 Sqm each complete all as specified and directed.

75 mm thick plain cement concrete, type C-2, (1:3:6) (using 40 mm graded aggregate) as in plinth protection complete all as specified and directed.

Plain cement concrete, type C-2, (1:3:6) (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Powder coated Anodised Aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

Powder coated aluminium anodised window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips, rubber packing, anodised aluminium snap beading screws etc. complete all as specified and directed.

Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium staples complete all as specified and directed.

4 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed.

PCC 1:4:8 type D-2 (using 40 mm graded crushed stoe aggregate) as in sub base and mass concrete complete all as specified and directed.

Salt glazed stone water drain pipe 300 mm bore laid in trenches and jointed complete all as specified and directed.

Concrete 1:4:8 type D-2 (using 40 mm graded aggregates) in bed to 300 mm drain pipes including packing under and haunching against the sides pipes after they are laid and tested for complete all as specified and directed.

Salt glazed stone water drain pipe 200 mm bore in trenches and jointed complete all as specified and directed.

Concrete 1:4:8 type C-2 (using 40 mm graded aggregates) in bed to 200 mm drain pipes including packing under and haunching againist the sides pipes after they are laid and tested for complete all as specified and directed.

PCC type B-1 (1:2:4) (using 20 mm graded crushed stone aggregate) as in copping benching and the like including form work complete all as specified and directed.

SFRC manhole cover size 600 mm x 600 mm dia x 70 mm thick with frame, sides protested by angle iron, set in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. Note : (i) Make SFRC manhole/drain cover and frame : (a) M/S PC concrete. (b) M/S K K Manhole (c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame.

SFRC manhole cover for gully trap of size 450 mm thick with frame, sides protested by angle iron, set in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. Note : (i) Make SFRC manhole/drain cover and frame : (a) M/S PC concrete. (b) M/S K K Manhole (c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame.

Construction of soakage well 2.4 M dia and 3 Mtr deep including excavation and earth work in any type of soil foundation in PCC 1:3:6 walls of honey combed and solid, M-25 concrete, RCC cover slab and filling with brick bats complete as shown in drgs No.TD CE/TD -1202/2003 sheet No 1/2 and 2/2 dated 09-10-2003 and as directed. Note:- Rate quoted shall deemed inclusive of dewatering during construction if met with.

Construction of septic tank 100 Users including excavation and earth work in any type of soil, foundation in PCC 1:2:4, brick work in cement mortar 1:4 RCC slab cover etc complete as shown in drg No. TD CE/TD -1202/2003 sheet No 1/2 and 2/2 dated 09-10-2003 and as directed. Note:- Rate quoted deemed inclusive of dewatering during construction if met with.

Surface dressing any type of soil not exceeding 15 cm deep and removal of surplus materials out side MOD land complete all as specified and directed.

Hard core broken stone or boulders of gauge exceeding 63 mm but not exceeding 100 mm, deposited spread and levelled in layers not exceeding 15 cm thick watered and rolled/ramed to a true surface complete all as specified and directed.

100 mm PCC 1:4:8 type D-2 (40 mm graded aggregate) as in sub base to floor complete all as specified and directed.

80mm thick factory made reflective type, heavy duty,smooth finish cement concrete inter locking paver block of M-40 grade made by block making machine with strong vibrating compaction casted in rubber/mould on a vibrating table of approved size and design/shape laid in required vibrating machinne complete all as specified and as directed by Engr-in-Charge.

Exavation trenches on any type of soil not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation complete all as specified and directed.

Factory made precast cemet concrete kerb stone of PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) of approved shape and size and design/shape laid in required colour and patter over and including 50 mm thick compacted bed of coarse sand filling the joints with coarse sand etc including vibrating the surface with vibrating machine complete all as specified and directed by Engr-in-Charge.

Applying two coat of synthetic enamel paint on concrete surfaces over a coat of primer including necessary preparation complete all as specified and directed by Engr-in-Charge.

Removing excavated material not exceeding 250 m and deposited where directed at a level not exceeding 500 m above the staring points complete all as specified and directed.

Stone walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed.

Flush pointing to random rubble masonry, uncoursed or brought upto courses in 1:4 complete all as specified and directed.

110 mm dia PVC (SWR) pipes single stack in any length as in weep holes of retaining wall complete all as specified and directed.

PCC type B-1 (1:2:4) (using 20 mm graded crushed stone aggregate) as in surface channels and drain beds complete all as specified and directed.

Demolition of reinforced cement work as in roof slabs (other than ground floors) beams staircases, landing chajjas and similar suspended work complete all as specified and directed.

Reinforced cement concrete M-25 (20 mm graded aggregate) as in slab supported on walls, beam and columns in floors, roofs landings, balconies etc. complete all as specified and directed.

Form work to soffits of suspended slabs such as roof, floor slabs, landings etc not exceeding 200 mm thick (horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed.

Screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in cement mortar 1:4 complete all as specified and directed.

Non skid ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm and not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the slurry complete all as specified and directed.

10 mm thick rendering on fair faces of brick/concrete surfaces in cement mortar 1:3 as in backing coat to recieve tiles as in vertical surfaces and finished even and fair complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Preparation of new plastered or unplastered surfaces of wall and apply two coat of oil bound distemper over a coat of primer including two coats of wall care putty wall care putty complete all as specified and directed.

Dismantling boarding any description any description fixed in any position with nails complete all as specified and directed.

18/19 mm thick plywood grade A (Termite treated/water proof), type B fixed with screws to timber/iron frame work complete all as specified and directed. Make : Green Ply/Kit ply.

0.9 mm thick decorative choice of lamination type-1 of surface finish, colour and pattern as approved adhesive as per manufacturers instructions complete all as specified and directed.

IInd class soft wood as in plian solid straight chowkhats wrought framed rebated on the solid put together on with glue pinned at joints complete all as specified and directed.

Stain less steel catcher of superior quality complete all as specified and directed by Engr-in-Charge.

50 mm stain less steel pivoted type hinges of superior quality and complete all as specified and directed by Engr-in-Charge.

Aluminium 65 mm mortice lock four levers complete all as specified and directed. (ISI Marked)

Aluminium anodised barrel tower bolts of extruded section with 75 mm long bolt complete all as specified and directed. (ISI Marked)

Drawer side channel of standard size and including of rooler for moving drawer, mild steel bright finish or electrogalavanised width of flap 30 mm & Length 60 mm as in rrepair complete all as specified and directed.

Stainless steel fancy type,bright finish handles fixed with screw, of 125 mm size as in repair complete all as specified and directed.

Stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen as in repair complete all as specified and directed by Engr-in-Charge.

Taking down carefully, copper/aluminum point wiring (light, fan, socket or power/ LED Light fittings) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as specified and directed. Keeping the LED lights in safe custody.

Point wiring for one light/fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistranded) PVC insulated and unseathed in and including PVC concealed conduit (thickness not less than 1.5 mm and 20 mm dia), medium grade with Modular metal flush boxes thickness (1.25 mm) and PVC back plate for mounting modular type in adequate module of switches, sockets and regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts copper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly complete all as specified and directed.

All as per ser item No 141 but for 3 pin 6 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and directed.

All as per ser item No 143 but for 3 pin 6 Amps socket outlet on the same board including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and directed.

All as per ser item No 141 but for 3 Pin 16 Amps socket outlet independent with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly complete all as specified and directed.

Switch Piano flush type 6 Amps single pole one way (Modular Type) with outer strip complete all as specified and directed.

Switch Piano flush type 16 Amps single pole one way (Modular Type) with outer strip complete all as specified and directed.

Socket 2-in-1, 3 Pin 6 Amps (Modular Type) with outer strip complete all as specified and directed.

Socket 2-in-1, 3 Pin 6 & 16 Amps (Modular Type) with outer strip complete all as specified and directed.

Electronic step type fan regulator 120 watt 230 volts 50 C/S deluxe modular type complete all as spcified and directed.

Ceiling rose surface bakelite 3 terminals complete all as specified and directed. Make : Cona Cat Part No 2126/SSK Cat Part No 572 or equivalent of Havells /Anchor/Kolors.

LED TARA-M/20W LED CRCA batten with decorative end cap complete with retrofit T8 - Polycarbonate/Glass Tube wattage 20W - 4ft White complete all as specified and directed by Engineer-in-Charge. Make - C&S Cat Part No LTDC01220WLED/WD or equivalent to Polycab/HPL/Bajaj

LED Backlit Panel CYGNUS-C/36W/2X2/W recess mounting powder coated white CRCA full glow LED panel wattage 36W - 2' X 2'.complete all as specified and directed by Engineer-in-Charge. Make - C&S Cat Part No LTCRP36WLED2X2 or equivalent to Polycab/HPL/Bajaj

Sheet metal enclosures for DBs when MCBs to be used double door DB SPN 8 way 240 volts with 200 Amps rated bus bar and neutral link in cluding chases wall for dixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make- INDOASIAN Cat Part No-KSLS0012 or equivalent LEGRAND/ABB /STANDARD

MCB Single Pole, 230 Volt, Raiting 6 to 32 Amps complete all as specified and directed. Make : Indoasian Cat Part No 811015 or equivalent to Havelles/ABB

MCB DP (Isolator), 240 Volt, Raiting 40 Amps complete all as specified and directed by Engineer-in-Charge. Make - INDOASIAN/LEGRAND/ABB/ STANDARD

Earthing complete with galvanised steel earth plate electode 600 mm x 600 mm x 6.00 mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level connected to and including galvanised steel earth lead wire 4 mm dia by means of bolts, nuts, chock, nuts and washers of galvanised iron or steel including PCC Pit in 1:2:4 type B-1 angle iron frame with RCC cover and handle, excavation and earth work in any type of soil medium grade GI watering pipe 20 mm bore with funnel and wire mash and light grade GI protection pipe 15 mm bore upto main board complete all as specified and directed as shown in electrical plate No 5 of MES Sch 2009 (Part I) connected to main control board as specified and testing completion.

Trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 2 core size complete all as specified and directed. Make - KEI, Finolex & Polycab. Note : Earth work and other connected work shall be measured & paid sperately.

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and directed. Note : for payment purpose punned thickness shall be measured.

Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed.

GI tubing (light grade) 25 mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and directed.

Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable in and including not less than 2.00 mm thick 20 mm dia & over concealed PVC non metallic rigid PVC conduit (ISI marked) with 1.25 mm thick pressed steel terminal boxes (modular type) concealed for fixing of modular switches/regulator etc along with PVC insulated and insheathed FRLS 1.5 sqmm multi stranded copper conductor cable (green color) as earth lead in and inculding PVC Concealed Conduit medium grade with all fitting (ISI make), as directed by Engr-in-Charge & including modular cover plate with frame, making good the disturbed surfaces to match with the existing specification complete all as specified and directed. Make- HPL or equivalent make in polycab/Havells

All as per ser item No 162 but for 05 Amp socket outlets point controlled by one switch on Independent board complete all as specified and directed.

All as per ser item No 162 but for 05 Amp socket outlets point controlled by one switch on Same board complete all as specified and directed.

All as per ser item No 162 but for 15 Amp socket outlets point controlled by one switch on Independent board complete all as specified and directed.

Switch single pole one way 5 Amps 240 volt (Modular Type) with outer strip and front cover plate complete all as specified and directed.

Sockets, 3 pin 6 Amps, 240 Volt flush type (Modular Type) with outer strip and front cover plate complete all as specified and directed.

Sockets Combined 2-in1, 3 pin 16 Amps, 240 Volt flush type (Modular Type) with outer strip & front cover plate complete all as specified and directed.

Switch single pole one way 15/16 Amps 240 volt (Modular Type) with outer strip & front cover plate complete all as specified and directed.

Ceiling rose surface bakelite 3 terminals complete all as specified and directed.

Replacement fan regulator 120W, 230V 50 C/S, deluxe Modular type electronic, step type hum free suitable control speed of fan from 0 to 100 % and connecting electrically all as required or complete all as specified and directed by Engineer-in Charge.

Taking down carefully existing ceilling/ exaust fan any type sweep and removing fan blade including cleaning all dust particle and filling cavities with filler material, oiling ,greasing including painting fan with blade complete one coat of synthetic enamel white paint by spraying and assemble the same along with all fixing connecting accessories and fixing the same position along with all new electrical wire connection complete all as specified and directed.

Slim linear LED tube light fixture 20 Watt as per 4 Ft white, Garnet Batten, Housing made of extruded AL with lumen O/P should not be less than 100 lum/watt with wider beam angle should be greater than 120 deg and poly difuser CRI should be more than 70. & PF should be greater than 0.9. making all connection using 1.5 sqmm copper conductor multistranded PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through PVC flexible conduit complete all as specified and directed. Make- HPL, Cat Part No- HLPLEDCADPL20CW or Equivalent make in polycab/Havells(E-lite LED TRICA)

1x9 Watt LED 5700 k to 6000K Mirror light ultra slim square profile linear LED lightining fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and directed. Make : Havells, Cat Part No. LHEXARP7PN1W009 or equivalent make in Bajaj/Wipro/syska

Slim type 36/40 Watt 2x2 LED Flat Panel light with diffused optics (600 x 600 x 12 mm) complete making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated 3 core flexible cable complete all as per the directions of Engr-in-Charge. Make- HPL Cat Part No- LEDPN36-E (WW) or equivalent Havells)/ Polycab

Bulk head light fitting, environmental friendly, ultra modern, energy saving, surface mounted, Oval plastic shaped, LED luminaire comprising of high brightness LEDs, IP54 complete all as specified and directed.

LED street Light fitting 35 Watt, New generation energy saving and environmental friendly long life versatile pressure die-cast aluminium IP66 with acrylic, with Heat resistant toughened Glass, Corrosion resistant, CCT 5700K complete making all connection with MCB SPN 40amp alongwith MCB Box enclosure, complete all as per the directions of Engr-in-Charge. Make - Havells, Cat Part No - LHETBXU7PAIS035 (ENDURA CITYLITE PLATINUM PLUS)/Polycab

Street light Bracket complete made of GI pipe of suitable size of 25 mm, medium grade 1.2 m long bent to shape as per site requirement along with MS flat iron clamps with nuts, bolts, washers including grouting the same with wall complete all as specified and directed by Engr-in- Charge.

Sub main wiring with two single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 10 sqmm and one single core PVC insulated unsheathed, FR flexible copper conductor cable of size 6.0 sqmm as earth lead in & inculding PVC casing/non metallic rigide PVC conuit medium grade and making good the distured at site or complete all as specified and directed Engr-in-Charge. Make of cable - KEI/polycab/finolex

Replacement of Sheet metal enclousure single pole and neutral with 2 pin and earth plug and socket 20A 240V complete with one single pole MCB of any cap from 10Amp to 20Amp, 10KA complete all as specified and directed.

Replacement MCB single pole 240 volt any rating from 10 to 32 Amps, B-Series, with rupturing capacity 10 KA, inculding providing aluminium thimble for out going cable complete all as specified and directed. Make - Legrand (DX3)/ Schneider (Acti-9)/Siemens (Betagard-8GB32)/Indo Asian(optipro)

Replacement MCB Single Pole & Neutral 240 volt any rating from 40 to 63 Amps, B-series, with rupturing capacity 10 KA, inculding providing aluminium thimble for out going cable complete all as specified and directed. Make - Legrand (DX3)/ Schneider (Acti-9)/Siemens (Betagard-8GB32)/Indo Asian (opti pro)

XLPE insulated screened PVC bedded galvanized steel strip or wire armoured, electric power cable heavy duty 1100 volts grade with stranded aluminium conductor of sizes 16 Sqmm 4 core complete all as specified and directed.

Galvanized steel pipe (light grade) with all fitting laid in trenches or passing through cable/road crossing or fixing along pole with suitable size clamps complete of size 40 mm dia complete all as specified and directed.

TPN MCB DB Double Door 63 Amp 16 kA (as Incommer) 4 way double door IP-43 complete all as specified and directed. Note : PCC and Cementing work for installation of TPN DB to Wall deemed to be quoted rate by contractor.

M/S ASHOK KUMAR PACHIALA

RAJ MOHD

sohtra and co

RAMAN CONSTRUCTION CO

khajuria builders

s l sharma and sons