REPAIR / CLEANING OF SEWAGE LINES, MANHOLE, SEPTIC TANKS, SOAKAGE WELLS, CULVERTS AND BOUNDARY WALLS IN ZONE-III UNDER AGE BR-III OF GE(S) MEERUT CANTT

Amount

Material and labour for cleaning of manholes for any depth by rodding and well flushing the sewage lines after removing sludge including taking off the manhole covers and refixing after cleaning of manhole of any size and depth. The manhole lines to be cleaned manually / mechanical sludge trailor and all sludge to be removed a distance of 500m outside of the Cantt area (Note : (a) The contractor shall provide sufficient labours everyday to clear for all types sewage line blockage complaints, (b) The period of completion for each complaints shall be 24 Hours (c) It will be the responsibility of the contractor to get the complaints completed with in stipulated period the labour shall be made available during the office hours for any complaints (d) The payment shall be made to the contractor on the basis of job done on complaints slip for each complaint. No payment shall be done for any incomplete work .The contractor to quote the rates accordingly) complete all as specified and directed.

All as per item No 1.00 above but cleaning and blockage of WC's toilets, Kitchen, Sink etc complete all as specified and directed.

Dewatering of soak well/soak pit including connected septic tank by discharging the sewage water into a sealed tanker with pipe system including vehicle and other arrangements and disposing within 3.00 KM outside cantt are complete all as directed by Engr-in-Charge.(Note: 4000 Ltr capacity tank shall be measured as one unit) complete all as specified and directed.

Demolition of RCC as in manhole/Soak well/Septic Tanks cover slabs or breaking of old line including packing under and haunching/surrounding pipe in similar location complete all as spd & directed.

M & L for RCC (1:2:4) Type B-1 using (20mm graded stone aggregate) as in precast cover slabs for man holesset in cement mortar 1:6 including necessary form work, placing in desired placing complete all as specified and directed.

M & L for Mild steel TMT bars 8 to 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed with CM 1:1 complete all as specified and directed.

M & L 200mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed with CM 1:1 complete all as specified and directed.

M & L PCC 1:3:6 type C-2 for concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in for 150mm dia pipe complete all as specified and directed.

M & L PCC 1:3:6 type C-2 concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in for 200mm dia pipe complete all as specified and directed.

Cleaning of sewage lines 150mm bore including manholes gully trap etc upto 1.50m deep by removing all silt, foreign material and other deposits completely and making the lines free from all obstacles and testing the flow of sewer line evenly, smoothly by

All as per item No 11.00 above but dia of pipe 200mm.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m and n. exc. 3m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and getting out complete in soft / loose soil for demolition of existing sewage pipe and laying of new pipe line complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and exc 3 m and n. exc. 4.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and getting out complete in soft / loose soil for demolition of existing sewage pipe and laying of new pipe line complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft / loose soil complete all as specified and directed.

Removing excavated materials n exc 50 mtrs and deposited where directed at a level n exc 50 mtr where directed n exc 1.50 m above the starting point.complete all as specified and directed.

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.

M&L 60mm thick coloured rubber moulded (comparising of red & yelow colour) interlocking pavers in approved design/colour set laid over 25mm thick coarse sand and all as specified and directed.

M&L for coloured chequered cement concrete tiles 20cmx20cmx20mm thick, set on CM (1:2), 12mm thick screed grouted with cement sand mortar 1:3 mixed with water proofing compound as per manufactures instructions and pointed in neat cement slurry in floors with grey cement and no pigment complete all as spd & directed.

Supply and fixing in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, excluding flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces complete all as specified and directed

Supply and fixing in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor, complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Supply and fix non skid glazed ceramic tiles(any shade) 400mmx400mmx7mm to 8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick laid in Dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&LCement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6mm mean radius built in CM 1:6 complete all as specified and directed.

M & L Brickwork with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in 1:6 complete all as specified and directed

M&L brick work with sub class' B' bricks (except bricks) of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrbbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coat of cement base paint complete all as specified and directed.

S&F in repair 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes complete all as specified and directed.

All as per item No 33.00 above but 75mm dia bore pipe.

Supply and fix in repair PVC (SWR) bend 110 mm dia complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) bends fixed to wall/floor complete and specified and directed.

Supply & fix in repair 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply & fix in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Material and labour for 10 mm thick rendering in Cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for foof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. and similar work conforming to Fe-290 Gde E-165 complete all as spd & directed.

Supply & fix chain link fencing of 3.00 mm dia galvanized steel wire 75 mmx75 mm mesh as in chain link fencing including provision of binding wires, welding, etc, and laid/fixed in position complete all as specified and directed ( Note:- MS nut bolts, round bars and flats etc shall be measured and paid seperately under relavent items as supply only) complete all as specified and directed.

S/F in repair galvnised two strand steel barbed wire 2.24 mm dia of barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straighting bolts including securing or typing at crossing with and provn of galvnised MS wire staple or steel pins etc as directed.

M/L preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified & directed.

Dismantling posts or struts (wood, steel or RCC) any section including taking out embeded portion and making good disturbed ground complete all as specified and directed.

Materials & labour for Providing precast cement concrete louvres and jallies type B1, 1:2:4 (using 12.50mm graded stone aggregate) set in CM 1:4 , 40 mm thick (measured solid), including all mouldings and design as approved complete all as specified & directed.

ATHARV CONSTRUCTION

R.D.Builders

H.B. Traders

jitendra AND Co

Jay Ambay Enterprises

M/S AGARWAL CONSTRUCTION CO.