UNDERGROUND CABLE FITING IN THE GARDEN USE FOR ELECTRIC LAWN MOWER GRASS CUTTING AND SOME OTHER MISCLLANEOUS WORK AT B R STUPA, KUSHINAGAR FOR THE YEAR 2024-25

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mAll kinds of soil.

2 Core aluminum armored cable 10sqmm

Guard pipe dia 25 mm.

Cabin box with electric power point to be installed at lawn for supplying of current to run the electric lawn mower.

Provisions for purchase of section hose pipe size 38 mm dia. for irrigation of garden.

Provision for purchase of plants:- i. Shorea Robusta (height 60-75 cm)- 25 nos. ii. Ficus Benjamina (height 45-60 cm) – 20 nos. iii. Murraya Paniculata (height 45-60 cm) – 10 nos. iv. Jasminummultiflorum (height 45-60 cm) - 15 nos. v. T.M.C. Single (height 60-75 cm) – 15 nos. vi. T.M.C. Varigated (height 45-60 cm) – 10 nos.

Installation of new Aluminium window and mosquito Nets at Horticulture Sub office Kushinagar:- i. Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tabular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing and dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust gree, straight, mitred and joined mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, Panelling and dash fasteners to be paid for separately): For fixed portion Anodised Aluminium (anodized transparent or dyed to required shade accoding to IS: 1868, Minimum anodic coating of grade AC 15) 16.44 KG. Installation of new Aluminium window and mosquito Nets at Horticulture Sub office Kushinagar:- i. Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tabular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing and dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust gree, straight, mitred and joined mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, Panelling and dash fasteners to be paid for separately): For fixed portion Anodised Aluminium (anodized transparent or dyed to required shade accoding to IS: 1868, Minimum anodic coating of grade AC 15) 16.44 KG. ii. Providing and fixing glazing in aluminium door, widow, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0mm thickness (weight not less than 10kg/sqm) - 3.11 Sqm. iii. Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4mm in both directions with wire of dia 0.63mm all complete:- a) With 12 mm mild steel U beading window frame (2.5m x 1.25m)- 3.12 Sqm b) With second class teak wood beading 62 X 19 mm Window Frame (1.5m x 1.2m)- 7.2 Sqm

M/S AASHIRWAD CONSTRUCTION (BID ID -3174433)

M/S Raj Construction (BID ID -3174995)

M/S VINOD KUMAR (BID ID -3173998)