PROVN OF WALL AND SWINGS IN CHILDREN PARK AND SPL REPAIR TO BLDG NO P35C TOILET BLOCK SM BARRACK AT JALIPA MIL STN UNDER GE ARMY BARMER

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided and removal unserviceable materials, debris and rubbish to out side MD land complete all as specified and directed.

M&L for Providing, cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified and directed .

M&L for applying neat cement slurry with 3 kg of cement per sqm with mixing of liquid water proofing compound as per manufacturer instructions over surfaces roof, terrace, projection, chajjas, walls after prepration and cleaning of surfaces complete all as specified and directed.

M&L for rendering 10mm thick cement plaster in CM (1:3) on concrete surfaces of roof, terrace, projection, chajjas, walls (old or new), finished even and smooth (without using extra lime or cement) with mixing of WPC as per manufacturer instructions complete all as specified and directed. (Note : WPC shall be measured and paid separately)

M&L for Applying evenly a priming coat with bituminous primer at 4 Kg per 10 sq metre over plastered/concrete surfaces including prepration complete all as specified and directed.

M&L for laying of APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gm/sqm) by torched applicatilaid over and including applying evenly a tack coat of industrial bitumen S-35 grade (30/40) at the rate of 1.2 kg per Sq.m including cleaning surfaces by on and as per manufacturer instructions complete and all as specified and directed.

M&L for 40mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) over roof, terrace in concrete including using integral WPC as per manufacturer's instructions, well compacted and fair finish, with forming by cutting 10mm wide and 10mm deep "V" grooves, cleaning out and filling solidly with a hot mixture, mastic bitumen, size of panel with groove shall not exceeding 0.40 sqm complete all as specified and directed. (Note : WPC shall be measured and paid separately)

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L for special treatment to floor/slab/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom, sides & top upto dado level), removal of floor trap and soil pipes including removal of demolished material exc 500m and n exc 1000m, fix the soil pipe, 20mm dia 200mm projected GI spout pipe through wall fill the gap between pipe and left out opening with PCC Type B0, 1:2:4 with using WPC cleaning to remove loose particles, dust, latance with brush etc of entire surface properly, applying 10mm thick plaster in CM (1:4) mixed with WPC liquid Conplast 421 as per manufacurer's instructions, on the bottom/slab and sides/beams/walls upto dado level of sunken area, prepration of surface and applying one coat each of Nitoproof 100 priming coat @1Ltr/4Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2Sqm, after drying of surface fill the sunken area with water for 24 hrs for the testing of leakage/seepage if leakage/seepage not observed, filling the sunken floor/area with PCC (1:5:10) using brick bat mixed with WPC liquid Conplast 421 as per manufacurer's instructions,, including placing of 75mm new CI floor trap, rendering again 40mm thick in CM (1:4) mixed with WPC liquid Conplast 421 as per manufacurer's instructions, over PCC/ top area, applying 10mm thick plaster in CM (1:4) mixed with WPC liquid Conplast 421 as per manufacurer's instructions, on the 40mm thick rendering, and applying one coat each of Nitoproof 100 priming coat @1Ltr/4Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2Sqm over 10mm thick rendering/top surface, area of toilet floor not exc 1.20Sqm complete all as specified and directed. Note : Nitoproof 100/120 and WPC Conplast - 421 will be used of Fosroc or techno commercially equivalent make.

M&L for special treatment to floor/slab/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom, sides & top upto dado level), removal of floor trap and soil pipes including removal of demolished material exc 500m and n exc 1000m, fix the soil pipe, 20mm dia 200mm projected GI spout pipe through wall fill the gap between pipe and left out opening with PCC Type B0, 1:2:4 with using WPC cleaning to remove loose particles, dust, latance with brush etc of entire surface properly, applying 10mm thick plaster in CM (1:4) mixed with WPC liquid Conplast 421 as per manufacurer's instructions, on the bottom/slab and sides/beams/walls upto dado level of sunken area, prepration of surface and applying one coat each of Nitoproof 100 priming coat @1Ltr/4Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2Sqm, after drying of surface fill the sunken area with water for 24 hrs for the testing of leakage/seepage if leakage/seepage not observed, filling the sunken floor/area with PCC (1:5:10) using brick bat mixed with WPC liquid Conplast 421 as per manufacurer's instructions,, including placing of 75mm new CI floor trap, rendering again 40mm thick in CM (1:4) mixed with WPC liquid Conplast 421 as per manufacurer's instructions, over PCC/ top area, applying 10mm thick plaster in CM (1:4) mixed with WPC liquid Conplast 421 as per manufacurer's instructions, on the 40mm thick rendering, and applying one coat each of Nitoproof 100 priming coat @1Ltr/4Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2Sqm over 10mm thick rendering/top surface, area of bathroom floor exc 1.20Sqm but not exc 2.00Sqm complete all as specified and directed. Note : Nitoproof 100/120 and WPC Conplast - 421 will be used of Fosroc or techno commercially equivalent make

M&L for special treatment to floor/slab/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom, sides & top upto dado level), removal of floor trap and soil pipes including removal of demolished material exc 500m and n exc 1000m, fix the soil pipe, 20mm dia 200mm projected GI spout pipe through wall fill the gap between pipe and left out opening with PCC Type B0, 1:2:4 with using WPC cleaning to remove loose particles, dust, latance with brush etc of entire surface properly, applying 10mm thick plaster in CM (1:4) mixed with WPC liquid Conplast 421 as per manufacurer's instructions, on the bottom/slab and sides/beams/walls upto dado level of sunken area, prepration of surface and applying one coat each of Nitoproof 100 priming coat @1Ltr/4Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2Sqm, after drying of surface fill the sunken area with water for 24 hrs for the testing of leakage/seepage if leakage/seepage not observed, filling the sunken floor/area with PCC (1:5:10) using brick bat mixed with WPC liquid Conplast 421 as per manufacurer's instructions, including placing of 75mm new CI floor trap any numbers with CI bend, T & pipe upto outer face of wall, rendering again 40mm thick in CM (1:4) mixed with WPC liquid Conplast 421 as per manufacurer's instructions, over PCC/ top area, applying 10mm thick plaster in CM (1:4) mixed with WPC liquid Conplast 421 as per manufacurer's instructions, on the 40mm thick rendering, and applying one coat each of Nitoproof 100 priming coat @1Ltr/4Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2Sqm over 10mm thick rendering/top surface, area exc 2.00Sqm (other tahan toilet & Bathroom or open area of bathroom) complete all as specified and directed. Note : Nitoproof 100/120 and WPC Conplast - 421 will be used of Fosroc or Equivalent make.

Demolition of stone slabs and tiles, ceramic tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as directed.

M&L for Glazed ceramic tiles of size 300mm x 200mm x 7mm/ 450mm x 300mm x 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.

M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.11 but n exc 0.18 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick (in single piece as vertical support and horizointal base for granite top) in cooking platform, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 15mm to 18mm thick Granite (of any type in single piece) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Taking down chowkats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed .

Taking down chowkats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and directed .

S&F for pressed steel frames of size 105X60mm of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed.

S&F for 35mm thick 2nd class HW plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of New or previously untreated steel or iron surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications complete all as specified and directed .

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F for steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed.

S&F for 3mm thick figured glass, pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F for 100mm size butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F for 150mm size Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed.

S&F for 150mm size aluminium anodized handle complete all as specified and directed.

M&L for 300mm size aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F for 140mm length aluminium floor door stoppers double legged with hard drawn steel spring fitted in floor complete all as specified and directed.

Dismantling of water tanks of capacity Exc 250 and n exc 500 ltrs (RCC hume Pipe/PVC) including disconnecting all connections etc complete all as specified and directed.

S&F for new rotational moulded polythylene water storage tank of 500 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F for 16mm bore of CPVC of food grade pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F for 20mm bore GI tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F for 25mm bore GI tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

Fixing only 25mm bore tubes, any grade, to walls and ceilings or laying in floors complete all as specified and directed.

S&F in repair 15mm bore CP fancy type stop valves/angle cock, cast copper alloy, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs 15mm bore stop valves, angle cock, cast copper alloy, chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S&F in repair 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F in repair SS soap dish, approximate size 150x 150x80mm, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and directed.

S&F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and directed..

S&F in repairs sheet glass shelf aasembly consisting of 5.50 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing of 600 mm long complete all as specified and directed.

S&F in repair vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including trap and provn of cement concrete bedding complete as fixed complete all as specified.

S&F in repairs wash hand basins, vitreous china,of size 550x400mm (flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and 32mm PVC waste pipe etc complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe including waste pipe complete all as specified and directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).

S&F for 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F for 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F for 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified and directed.

S&F for 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified and directed.

S&F in repairs 100mm bore cast iron branch pieces, single or double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors complete all as specified and directed.

S&F in repairs 75mm bore cast iron branch pieces, single or double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors complete all as specified and directed.

S&F in repair 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and directed.

S&F in repair 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and directed.

Fixing only in repair 100mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and directed.

Fixing only in repair 75mm bore cast iron sand cast soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to walls complete all as specified and directed.

Cutting chases, holes in Brick walls, Stone walls, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10cm girth all as specified and directed.

M&L for 25mm thick PCC 1:2:4 Type B0 (12.5mm graded stone aggregate) as in levelling course in floor complete all as specified and directed.

Demolition of brick work of stone/boulder/PCC block masonry, build in cement mortar including all for ashlars facings, dressed stonework, precast concrete articles and precast concrete block walling complete all as specified and directed.

M&L for type C1 1:3:6 (20 mm graded aggregate) Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6), complete all as specified and directed.

Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces even and fair finish without using extra cement mixed with WPC as per manufacturer's instructions complete all as specified and directed. Note : WPC shall be measured and paid separately.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces even and fair finish without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick plaster in CM (1:3) on faces of brick work or concrete on surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of primer complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment, plastered or unplastered old surfaces of walls, including filling of cracks/holes by crack filler, removing unnecessary nails and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment, plastered or unplastered old surfaces of ceiling, including filling of cracks by crack filler, removing unnecessary nails and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed.

M&L for injection grouting for the RCC members like column, beam, slab etc with the mixture of fine sand and cement with appropriate pressure and machinery, ratio of material is (1:1) or directed by Engineer-in-charge for the repairing of cracks, holes, voids, honeycombing, damage of structural member etc, drill the ports or holes, distance between two nozzles/nipples approx 0.50m-1.00m in RCC member, having dia 2.5cm and 5.0cm deep and fix the nozzle/nipple of the grouting machine/hose pipe, filled the properly cracks and holes of structural member, all around or surface area of RCC member with epoxy, polyster or cementious materials give time to seal to be hardened, inject the grout material in the RCC member till RCC member voids saturated completely, for the same process to be repeated 02 or 03 times after some interval, refix the nipples properly without damazing the RCC members and holes of the same filled properly with non shrinkage material of min M-50 grade, complete all as specified and directed. Note : (i) Rates of the all requires machinery, tools etc for the injection grouting shall be deemed to be included in quotated rates. Make: CICO Technologies Ltd, M/s Sika India Pvt Ltd, M/s Bostik India Pvt Ltd, M/s Choksey chemicals Pvt Ltd, M/s Thermax Ltd, M/s Master builder solution (BASF) or techno commercially equivalent ” (ii) Note for BOQ item No 83 and 89 to 93 : These items shall be executed under the supervision of specialized agency as approved by GE without any extra cost to Govt and the agency shall be one of the authorised agencies / applicators of manufactures of makes as listed here in against serial item No 83 and 89 to 93 of BOQ / schedule 'A' .

S&F for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F for Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F for Mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. (Note : Aditional Reinforcement: In the case of the shear relnforcement also, if the diameter of the rebars are reduced, provide 8mm dia stirrups In the form of 7 "U" shaped bars. Tie them properly so that it has a tight contact with the main bars.)

S&F for Hard drawn steel wire fabric weight per square metre n exc 4 kg, cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in old reinforcement of RCC member complete all as specified and directed by Engineer-in-charge. (Note : Rates for the making 100mm to 200 deep holes for fabric and filling with one or two component styrene free vinylester resin anchor or two components, styrene & cement free epoxy- acrylate fixing and anchoring compound ( having the technical parameters mentioned in material specifications) using standard sealant applicator gun after drilling holes of required diameter at required locations, for holding / fixing / placing in position the steel mesh reinforcement at desired level/ stretching shall be deemed to be included in quoted rates.)

M&L for Chipping of 50mm average thickness unsound/weak concrete material from slabs, beams, columns, footings etc. and plaster with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc and disposal of debris for all lead and lifts complete all as specified and directed.

M&L for Cleaning & applying rust remover on (CICO Clean-o rust) in two coats over rusted reinforcement surface of RCC members and providing anti corrosive coating with two component epoxy based zinc rich primer/Rust passivation Inhibitor coat at the rate of 2-3 sq. mtr/ltr not less than 50 microns dft with CICO ZINCILATE-500 or equivalent to reinforcement surface as per manufacturer’s instructions including all machinery, tools tackles and clearing of debris complete all as specified and directed. Make: CICO Technologies Ltd, M/s Sika India Pvt Ltd, M/s Bostik India Pvt Ltd, M/s Choksey chemicals Pvt Ltd, M/s Thermax Ltd, M/s Master builder solution (BASF) or techno commercially equivalent. (Note : Entire Exposed Surface of RCC members after chipping shall be measured and paid.)

S&F of new steel or rebars by drilling holes with 10 mm to 16mm dia and 300 to 450mm deep/wide as per IS code of 10D formula and filling the holes after inserting of reinforcement dia 8 to 16mm for anchoring at ends/shear connector and filled the holes with one or two component styrene free vinylester resin anchor or two components, styrene & cement free epoxy- acrylate fixing and anchoring compound ( having the technical parameters mentioned in material specifications) using standard sealant applicator gun after drilling holes of required diameter at required locations, for holding / fixing / placing in position the steel mesh reinforcement at desired level/ stretching complete all as specified and directed. (Note : Steel/reinforcement shall be paid and measured separately) . Make: CICO Technologies Ltd, M/s Sika India Pvt Ltd, M/s Bostik India Pvt Ltd, M/s Choksey chemicals Pvt Ltd, M/s Thermax Ltd, M/s Master builder solution (BASF) or techno commercially equivalent

M&L for providing Micro concrete M-50 (Minimum grade) with CICO MICROCRETE at the rate of 25kg per 0.0125 m3 with 20% properly graded 5mm to 10mm silt free aggregate as per manufacturer instructions and mixing concrete with mechanically electrically operated mixer machine, compaction with proper vibrator, including all necessary scafolding if required etc all as specified and directed. Make: CICO Technologies Ltd, M/s Sika India Pvt Ltd, M/s Bostik India Pvt Ltd, M/s Choksey chemicals Pvt Ltd, M/s Thermax Ltd, M/s Master builder solution (BASF) or techno commercially equivalent. (Note : Rates for the drilling of holes of floor slab/ columns/ Beams or Junction or RCC beam, column and floor slab for column and beams main bars of any dia including filled the same holes with one or two component styrene free vinylester resin anchor or two components, styrene & cement free epoxy- acrylate fixing and anchoring compound shall be deemed to be included in quoted rates.)

M&L for providing 25 to 30mm average thickness Micro concrete M-50 (Minimum grade) with CICO MICROCRETE at the rate of 25kg per 0.0125 m3 with 20% properly graded 5mm to 10mm silt free aggregate as per manufacturer instructions and mixing concrete with mechanically electrically operated mixer machine, including all necessary scafolding if required etc complete all as specified and directed. Make: CICO Technologies Ltd, M/s Sika India Pvt Ltd, M/s Bostik India Pvt Ltd, M/s Choksey chemicals Pvt Ltd, M/s Thermax Ltd, M/s Master builder solution (BASF) or techno commercially equivalent.

M&L for Epoxy Bonding Agent suitable for bonding new to old concrete, bricks and steel components, bricks, tiles etc after the prepration of old concrete/RCC surface by cleaning and removing of dust, dirt, loose particles, laitance etc by wire brushing, scrapping and washing with water complete all as per manufacturer's instructions complete all as specified and directed. Make: CICO Technologies Ltd, M/s Sika India Pvt Ltd, M/s Bostik India Pvt Ltd, M/s Choksey chemicals Pvt Ltd, M/s Thermax Ltd, M/s Master builder solution (BASF) or techno commercially equivalent.

S&F for heavy duty false work of any height like composite steel section erecting for temporary supports with adjustable arrangement to the structural members like beams, columns, slabs in horozointal or vertical directions etc. to relieve the load on the members during breaking of damaged concrete, removal guniting, excavation or any dismantling work and removed after work complete all as specified and directed . Note : These supports shall be provided either in the form of props or trestles fabricated using structural steel as per the site requirements complete and all as specified & directed.

S&F for MS props of any height, erecting for temporary supports with adjustable arrangement to the structural members like beams, columns, slabs in vertical directions etc. to relieve the load on the members during breaking of damaged concrete, removal guniting, excavation or any dismantling work and removed after work complete all as specified and directed. Note : These supports shall be provided either in the form of props or trestles fabricated using structural steel as per the site requirements complete and all as specified & directed.

S&F in repair 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.

M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil complete all as specified and directed.

M&L for Removing excavated material exc. 1.50 km but n exc.5 km and directed complete all as specified and directed.

M&L for Returning filling in including spreading levelling watering and well ramming in layers n.exc 25 cm in soil complete all as specified and directed.

M&L for cement concrete 1:4:8 (type D-2) using 40 mm graded crushed stone aggregate in foundations, filling and mass concreate complete all as specified and directed.

S&F for OG-01 Sky Walker with necessary fixing arrangments complete all as specified and directed.

S&F for OG-03 Back Extension with necessary fixing arrangments complete all as specified and directed.

S&F for OG-05 Chest Press Single with necessary fixing arrangments complete all as specified and directed.

S&F for OG-10 Pendulum Double with necessary fixing arrangments complete all as specified and directed.

S&F for OG-12 Standing Twister Single with necessary fixing arrangments complete all as specified and directed.

S&F for OG-17 Hand Rotator Single with necessary fixing arrangments complete all as specified and directed.

Paliwal Construction Company