Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.1 LAccepted-AOC SECUNDERABAD | WARANGAL | TELANGANA | 506350 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹44.2 L+₹60,551.40 (1.39%)Rejected-AOC | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹46.3 L+₹2.7 L (6.22%)Rejected-AOC | L3 | Rejected-AOC Being not L1 |
Tender Value
₹47.7 L
EMD Value
₹95,400
Closing Date
2 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri M Saravanan, IDSE, GE
Garrison Engineer North 35 Allenby Lines Secunderabad 500087
ADDN ALTN TO VVIP GUEST ROOM BLDG NO P 610 AT CDM AND PROVN OF APPROACH PATH NEAR MAIN GATE AREA AT CDM UNDER GE NORTH SECUNDERABAD
2023_MES_630327_1
8737
Open Tender
Civil Works
Item Rate
180 days
GARRISON ENGINEER NORTH SECUNDERABAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER (NORTH) SECUNDERABAD
₹95,400
Yes
7 Feb 2024
29 Nov 2023
4 Jan 2024
29 Nov 2023
2 Jan 2024
14 Dec 2023
Amount
Taking down cement plaster on brick or stone walls, concrete surfaces roof, chajja, ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed.
M & L for water proof plastering 15mm thick on fair faces of brick work or concrete surfaces or sunken floor in CM 1:4 with Water proofing compound (WPC) @3% by weight of cement including finishing the surfaces complete all as specified and as directed.
M & L for Rendering 5mm thick on brick work or concrete ceiling surfaces in cement mortar 1:3 with Water proofing compound (WPC) @3% by weight of cement including finishing the surfaces complete all as specified and as directed.
M & L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM1:6 complete all as specified and as directed.
M&L for preparation of new wall surfaces & applying two coat of plastic emulsion paint over a coat of alkali resistant primer over 3mm thick wall care putty in two layer complete all as specified and as directed.
M&L for preparation of new ceiling surfaces & applying two coats of plastic emulsion over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.
M&L for preparation of new ceiling surfaces & applying two coats of distemper (oil emulsion) over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.
M&L for preparation of new wall surfaces & applying two coat of distemper (oil emulsion) over a coat of alkali resistant primer over 3mm thick wall care putty in two layer complete all as specified and as directed.
M & L for 3mm thick wall crack putty on old wall /concrete surfaces complete all as specified and as directed.
Dismantling of terrace roof tiles including cement mortar bedding (but not backing),removal serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.
Demolition of cement concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work otherwise specifically provided for roof treatment complete all as specified and as directed.
Brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and as directed.
M&L for PCC 1:2:4 Type - B0 (using 12.50 mm graded stone aggregate) as in padding concrete, covering etc on roofs, chajjas complete all as specified and as directed .
M & L for water proof plastering 10mm thick on fair faces of brick work or concrete or roof terrace surfaces or sunken floor in CM 1:4 with WPC @3% by weight of cement including finishing the surfaces complete all as specified and as directed. Note: WPC will be measured seperately.
M&L for Mangalore pattern tiles with terracotta colour finish of approved pattern & design over roof set and jointed in cementious water proofing compound and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.
Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n.exc 4 Sqm each etc making good of hold fast holes with PCC Type C 1:3:6 complete all as specified and as directed.
S&F 12mm thickness toughened glass factory made frosted with CDM logo embedded as in door/ wall partition including providing and fixing of top & bottom pivot & spring type fixing arrangements & necessary holes & making good & required hinges, SS 304 grade handles,door/floor spring etc and including all necessary fittings complete all as specified and as directed.
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) n exc 1.5 sqm each etc including making good of hold fast holes with PCC Type C 1:3:6 complete all as directed by Engr-in- Charge
Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wire mesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
M&L for 4.8 mm thick tinted glass, ordinary quality and fixed with glazing clips and oil putty in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed.
Supply only Integral water proofing compound for waterproof plastering complete all as specified and as directed.
Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing),removal serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
S&F Glazed ceramic coloured wall tiles in vertical surface 300mmx450mmx 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10 mm thick rendering in CM 1:3 all as specified and directed. Make:Kajaria or equivalent in Johnson/Somany as approved by GE.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) coloured area of each tile size 400mmx400mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 all as specified and directed Make:Kajaria or equivalent in Johnson/Somany as approved by GE.
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Make: Rajshri or equivalent as approved by GE.
S&F 4 mm thick tinted sheet glass frosted, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.
S&F in repair 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of extruded section complete all as specified and as directed.
S&F 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed of extruded section complete all as specified and as directed.
S&F Extruded brass handles, fabricated type polished 150 mm complete all as specified and as directed.
S&F in repair Extruded brass handles, fabricated type polished 150 mm fixed complete all as specified and as directed.
M & L for 140 mm long floor doorstopper brass body and tongue with hard drawn steel spring fixed complete all as specified and as directed.
S&F in repair for 140 mm long floor doorstopper brass body and tongue with hard drawn steel spring fixed complete all as specified and as directed.
Taking down door shutters and refixing in same opening after carrying out alteration of any description area exceeding 2.00 Sqm each complete all as specified and as directed.
S & F 40mm dia cupboard knobs fixed with nut screw & washer or brass polished complete all as specified and as directed.
S&F ball catch spring 8mm dia steel ball and brass body and striking plate including letting in complete all as specified and as directed.
S&F in repairs brass chromium plated tubular curtain rod 20mm dia complete all as specified and as directed.
S&F in repairs brass chromium plated brackets/ end globes complete all as specified and as directed.
S&F in repairs 18 mm thick Pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice laminations complete all as specified and as directed.
Hacking out old serviceable glass/broken glass panes of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size complete all as specified and as directed.
M&L for 4 mm thick tinted sheet glass, ordinary quality and fixed with glazing clips and oil putty in squares exceeding 0.5 Sqm in each pane complete all as specified and as directed.
S&F in repair 12 mm thick Ply wood BWR, type BB fixed with screws to walls by inserting rawl plugs in the wall/ column surfaces complete all as specified and as directed.
S&F in repair vitreous china counter top WHB white of size 565x415x190mm or required size as approved and complete all as specified and as directed. Make: JAQUAR or equivalent in Hindware /Parryware/CERA as approved.
S&F in repair Aluminium Door closer hydraulically regulated designation No.3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61Kg to 80 Kg complete all as specified and as directed.
Supply and fix in repair bathroom mirror cabinet PVC of size 450 X 300 mm fancy type complete all as specified and as directed . Make : Cat No-554 of Prayag or equivalent Rajashri/Syntex as approved by GE.
S&F in repairs Stop/angle valves fancy type 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Make : Cat No:CON-053KN of Jaquar or equivalent Make:Kajaria or equivalent in Cera/Johnson as approved by GE.
Supply and fix in repair Black tempered glass body, 2 ABS body massage jet, hand shoer with flexible hose of minimum water pressure 2 bar complete all as specified and as directed. Make: Cat No JPL-BLK-G0842JAX of Jaquar or equivalent in Cera/Johnson as approved by GE.
Supply and fix in repair framed Shower enclosure of corner entry with door sliding to both sides- 4 parts, glass 6mm thick & chrome finish of size Height:1850mm, Width & Length:1200mm complete all as specified and directed. Make: Cat No BKT-CHR-31651200X of Jaquar or equivalent as approved.
Supply and fix in repair 15mm dia brass CP mixer valve for mixing hot & cold water complete all as specified and as directed. Make : Cat No:CON-169KNB of Jaquar or equivalent in Cera/Johnson as approved by GE.
Supply and fix in repair CP health faucet with 1m tube and hook complete all as specified and as directed. Make : Cat No:ALD-579 of Jaquar or equivalent in Cera/Johnson as approved by GE.
S&F in repairs15mm size two way bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make: Cat No: FON-CHR-40041 JAQUAR or equivalent as approved.
S&F in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.
Taking out existing water closet, pedestal pattern and replacing with new EWC (Pedestal Pattern) cascade type with flush tank, seat cover etc white including fixing bolts complete including making good to floor to match with adjoining surfaces . Make: cat no: SLS-WHT-6853S JAQUAR or equivalent in Cera/Johnson as approved by GE.
S&F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed Make: Cat No. CON-021KN of Jaquar or equivalent in Cera/Johnson as approved by GE.
S&F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S&F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm embedded in the wall complete all as specified and as directed.
S&F in repairs bib tap fancy type chromium plated, crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed Make : Cat No. CON-CHR-037KN of Jaquar or equivalent in Cera/Johnson as approved by GE.
S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing fixed in repairs complete all as specified and directed
S&F in repairs Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed
S&F 15 mm bore GI Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F 20 mm bore GI Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
S&F UPVC/PVC (SWR) floor trap 75mm dia, plain with SS grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs Grating doom 100mm dia of PTMT/ SS. (Minimum weight 85gms) complete all as specified and as directed.
S&F in repairs UPVC (SWR) pipes 75mm bore double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
S&F UPVC (SWR) pipes 75mm bore double socketed, in any length with rubber ring joints, fixed on walls complete all as specified and directed
S&F in repairs UPVC/PVC (SWR) door Bend 75mm dia complete all as specified and as directed.
S&F in repairs UPVC/PVC (SWR) single T 75mm dia complete all as specified and as directed.
S&F in repair wall hung fancy type bevelled frameless looking mirror of 5mm thick size 1.20mx0.75m size with quality glass with SS Studs fixed to wall with chromium plated screws and cup washer complete all as specified and as directed.
S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed
S&F in repairs PVC LDPE waste pipe 32mm dia 1m length complete all as specified and directed
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as complete all as specified and as directed.
S&F Gl frame work Size of grid 605 x 605mm for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.
M & L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed.
M&L for preparation of new gypsum board ceiling surfaces & applying two coat of OBD over a coat of alkali resistant primer over plaster of Paris putty of 1 mm thickness on ceiling surface complete all as specified and as directed.
Demolition of cement concrete of any description (unreinforced) in any position incl plastering etc complete all as specified and as directed.
M&L for 2 coat bitumen grade 85/25 applied hot to concrete surface at rate of 1.5 kg per sqm per coat in sunken floor complete all as specified and as directed.
M&L for APP based polymeric membrane minimum weighing 3 Kg/ Sqm & minimum 3 mm thickness reinforced with polyster non woven fabric (wt not less than 150 gms/ sqm) land on primed surface by forced application in sunken floor complete all as specified and as directed. (Make: BASF/Fosroc/IWL/ STP Ltd)
M&L Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 40mm thick in sunken floor of toilet/bathroom finished even and smooth with out extra cement complete all as specified and as directed.
M&L for PCC type E2 1:5:10 (40mm aggregate) in sunken floor of toilet/ bathroom finished fair and even complete all as specified and as directed.
M&L provide 50 mm dia UPVC pipe of pressure rate 10kgf/cm2 as water spout in sunken floor complete all as specified and directed. (Make:Prince/Supreme/Finolex).
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness complete all as specified and as directed.
M&L for Cement concrete type B- 0, 1:2:4 (12.5mm graded stone aggregate) 25 mm thickness in floor complete all as specified and as directed.
M&L for Vitrified Ceramic tiles matt finished Dark shade double charged 10 mm thick (square/ rectangular), area of each tiles size 1000mmx1000mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed. Make:Kajaria or equivalent in Johnson/Somany as approved by GE.
M&L for Vitrified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) matt finished, area of each tiles size 1000mmx1000mm, in skirting/dado/wall tiles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in CM 1:3 complete all as specified and as directed. Make:Kajaria or equivalent in Johnson/Somany as approved by GE.
M&L for Chequered cement concrete tiles 30cm x 30cm x 25 mm thick rubber moulded, set, jointed and pointed in neat cement slurry in floors/tread/risers with grey cement and no pigments & incl screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed.
Demolition of cement concrete of any description (reinforced) in any position incl plastering etc complete all as specified.
M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for landings, lintels, manhole cover slabs, duct etc including necessary form work and set in CM (1:6) complete all as specified and as directed.
M&L for MS TMT bars 8mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and binding with and including Mild steel wire (anncelled) not less than 0.90 mm dia complete all as specified and as directed.
S&F in repairs UPVC/PVC (SWR) P trap 110mm dia complete all as specified and as directed.
S&F in repairs UPVC/PVC (SWR) Bend 110mm dia complete all as specified and as directed.
S&F in repairs UPVC/PVC (SWR) single T 110 mm dia complete all as specified and as directed.
S&F in repairs UPVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed on walls complete all as specified and directed
S&F in repairs UPVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
M&L for Brick work with subclass 'B' bricks, straight or curved on plane exc 6m mean radius built in CM 1:4 complete all as specified and as directed.
Demolition of Brickwork or stone/ boulder masonry, laid in cement mortar complete all as specified and as directed.
Dismantling wrought iron or mild steel work or SS Work of any description not otherwise provided for all as complete all as specified and as directed.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.
Dismantling of Plain or corrugated galvalume steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, AZ-150 of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall & crimp as sheet, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick AZ-150 of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for Complete removal of existing treatment of external wall surfaces & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over Two coat of putty 3mm and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall/concrete ceiling surfaces of any height complete all as specified and as directed. Make: Apex Ultima from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux.
M&L for Complete removal of existing treatment of old plastered internal surfaces of wall and applying two coats of plastic emulsion over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.
M&L for Complete removal of existing treatment of old plastered ceiling surfaces and applying two coats of plastic emulsion over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed.
M&L for Complete removal of existing treatment of old plastered internal surfaces of wall and applying two coats of distemper (Oil emulsion) over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed. .
M&L for Complete removal of existing treatment of old plastered ceiling surfaces and applying two coats of distemper (Oil emulsion) over a coat of primer including 3mm thick wall care putty in two layers complete all as specified and directed. .
M & L for Preparing old steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M & L for Preparing old wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as complete all as specified and as directed.
M&L for applying one coat of French polishing on wood and wood based surfaces exc 10cms width or girth of any description over a coat of wood filler including preparation of surfaces complete all as specified and as directed.
Demolition Stone slabs and tiles/granite tiles laid in cement mortar of any description or thickness in floors, aprons etc., complete all as specified and as directed.
M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over cement screed 15mm thick in cm 1;4 over complete all as specified and directed.
Surface dressing n exc 15 cm deep in soft/loose soil complete all as specified and as directed.
Hardcore of gauge n exc. 63 mm broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc., n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.
Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints without grooves (thickness of joints except at sharp curve shall not to more making drainage opening wherever required complete all as specified and directed.
Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.
Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed.
Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for refixing/ reuse at site complete all as specified and directed.
M & L for Point wiring on concealed conduit with 1.5 Sqmm FRLS copper conductor single core PVC insulated sheathed 1100 V multistranded drawn through existing rigid PVC conduit and conduit of dia medium grade and modular accessories including fixing/grouting sunken/ surface along with modular flush box of suitable thickness covered with suitable modular cover plate including running up of 1.5 Sqmm FRLS copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc complete all as specified and as directed for : (a) One light/fan/Bell point controlled by one, one way switch 5A, SP NOTE: Rate of Modular Flush box and Cover plate are inclusive of rate quoted by the contractor
All as per Sl item No 124 above, but One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.
All as per Sl item No 124 above, but One 3 Pin 5 Amps switch socket Independent board complete all as specified and as directed.
Description all as per item No 124 here-in-before, but using 2.5 Sqmm FRLS single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sq mm FRLS copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed.
All as per Sl item No 127 above, but One 2/3 pin 15 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.
S & F Modular switch 1 way 10 A, 1 Module capacity 230 volts complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian
S & F Modular switch 1 way 16 A, 1 Module capacity 230 volts complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian
S&F Modular Bell Push 10A, 1 Module complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian
Supply and fix socket outlet modular type multipurpose 2/3 Pin, 10 amps, 230 volts combined 2 Module complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian
Supply and fix socket outlet modular type multipurpose 2/3 Pin, 6/16 amps, 230 volts combined 2 Module complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian
S & F Modular ceiling fan regulator stepped type heavy duty suitable to work on 230 volts, 2 Module complete all as specified and as directed. Make: Anchor Roma/Havells/IndoAsian
S & F calling Bell, AC, 230 volts, single pole complete all as specified and as directed.
S & F in replacement of Single pole and Neutral enclosure with a two pin and earth plug and socket metal clad complete with one single pole MCB 20 Amps (AC Box) complete all as specified and as directed. Make:Havells/Standard/IndoAsian
S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed.
S&F sheet metal enclosure vertical type MCCB DB TPN 4 way double door with suitable rated bus bar 415 volts suitable for and including 125 Amps TPN MCCB 16 KA as incommer and 12 Outgoing SP MCB's with magnetic locking system complete all as specified and as directed. Make : Standard/ Havells/ IndoAsian Note: MCB SP Shall be measured and paid separately.
Supply, fix, connecting and testing factory made, distribution board, (MCB DB) TPN, 4 Way, having degree of protection IP 43-IK 09 with metal double door, 415 Volts, flush type made out of 1.2 mm thick CRCA sheet, metal duly powder coated and confirming to IS 8623 with 200 Amps rated copper bus bar with neutral link including provision for MCB TPN as incomer and SP MCBs as outgoing and total number of modules equal to MCB TPN + 12 with blanking plates and fixed flush to wall and making good the disturbed surfaces etc, complete all ass specified and as directed. Note: MCB TPN and MCB SP will be measured and paid separately.
Supply, fix, connecting and testing MCB, Triple Pole Neutral (TPN) 40/63 Amps, 415 Volts of rupturing capacity 10 KA, 'C' Series complete all as specified and as directed.
M & L for chipping the wall for fixing of DB and plastering the disturbed surface along with putty and existing colour complete all as specified and as directed.
Supply, fix, connecting and testing MCB, Single Pole (SP), 6-32 Amps, 240 volts of rupturing capacity 10 KA, 'C' series complete all as specified and as directed.
S & F in replacement LED spot light 06 watts including LED 06 watts lamp COB complete with all accessories complete all as specified and as directed. Make: Havells Model INNOVA NEO SPOT LIGHT of Cat Part No LHEEAQPBIB1W006 OR equivalent in PHILIPS/WIPRO as approved by GE.
S & F in replacement of wall mounted batten type LED light of 12 watts with aluminium extruded batten and system lumens of 1200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95, colour rendering index CRI>80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistranded three core of suitable length from fitting to the ceiling rose complete all as specified and as directed. Make: Philips Model BN021 LED12S PSU GR or equivalent make in Wipro/Havells/GE
S & F in replacement of wall mounted batten type LED light of 22 watts with aluminium extruded batten and system lumens of 2200 lm minimum with IP & surge protection alongwith driver efficiency >85% and power factor >0.95 , colour rendering index CRI>80 along with integrated driver complete and connecting to the point wiring with necessary flexible copper conductor of multistranded three core of suitable length from fitting to the ceiling rose complete all as specified and as directed. Make: Philips Model BN021C LED22S or equivalent make in Wipro/ Havells/GE as approved by GE.
S & F in replacement of Security Lights of 25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution with suitable pipe bracket 32 mm dia 0.60 Mtr length fixed on wall with suitable flat iron clamps and nut bolts including provision of 1.5 sqmm, 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and as directed. Make: Havells Cat part No ENDURASUNDOWNSL25W LED765PASYBOPCIHD or equivalent make in Wipro/Philips as approved by GE.
S & F in replacement LED recess cum surface panel light (round) 12 watts including LED 12 watts lamp complete all as specified and as directed. Make: Havells Model Trim Clipon LED Round LHEAABP7IL1W012 OR equivalent make in PHILIPS/WIPRO as approved by GE.
M & L for Submain wiring with two single core 6 Sqmm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 6 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note:-two runs of cable, one run of earth continuity conductor and one run of conduit shall be measured and paid as one unit length.
M & L for Submain wiring with two single core 4 Sqmm FRLS PVC insulated copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and concealed conduit accessories of suitable dia medium grade including running up of one runs of 4 Sq mm FRLS copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing complete all as specified and as directed. Note:-two runs of cable, one run of earth continuity conductor and one run of conduit shall be measured and paid as one unit length.
Disconnecting the Electrical connection, removing the copper line, discharge line of Split AC 1.5/2.0 Ton capacity including indoor and outdoor units and all accessories and shifting/re-installing and testing the whole unit of Split AC in the same location and checking the leakage of Split type 1.5/2.0 Ton AC with the help of N2 Gas and after defecting and repairing the leakage, charge the suitable refrigerant upto required level as specified in suitable size and length of copper pipe and making the holes in wall complete all as specified and as directed.
Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth electrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point made out of Bronze/Gun metal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.
Supply and Fixing PVC Body Exhaust fan of 230 mm sweep of 1200 RPM, Air Delivery 500 CMH single phase 50 HZ AC Supply with louvers and connecting up with and including provision of PVC insulated copper flexible cord from ceiling rose to connection of exhaust fan complete all as specified and as directed.
Disconnecting and removing ceiling/exhaust/wall fan of any capacity any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan complete all as specified and as directed. NOTE :- (1) Necessary repairs/ replacement of unserviceable parts shall be measured and paid separately.(2)Labour element for replacing of u/s parts deemed to be included in rate quoted.
Material and labour for rewinding & painting of the ceiling/exhaust fan complete with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer's design and instructions including varnishing of ceiling fan of any make and any sweep including taking out burnt copper wire complete all as specified and as directed. Note: Old winding material is property of the contractor
Supply & Fix in repair of Ball bearing/Brass bush of Ceiling/Exhaust Fan upto 300mm complete all as specified and as directed.
Supply & Fix in repair of Capacitor of Ceiling Exhaust Fan upto 300mm complete all as specified and as directed.
Taking down the geysers of capacity 25/35 from its mounting position by removing all water and electric connections and de-assembling the geyser after carrying out the following works:- (a) Descaling, cleaning the inner tank thoroughly and there should not be any bad taste of water. (b) Examining the water tightness of storage tank after cleaning. (c) Examining the physical condition of thermostat, base assembly fusible plug and outer tank for its serviceability. (d) Inspection of pilot lamps. (e) Reassembling the geyser parts and testing including checking all electrical system (ensuring there is no current leakage) and also conducting hydraulic testing. (f) Re-fixing the Geyser and making electric connections, inlet and outlet water connections and testing and checking of all water inlet, outlet valves connected with geysers. Note : Defective /worn out parts if required shall be measured and paid separately under relevant items in this schedule.
Supply and fix rubber PVC connection of 2/3 feet complete all as specified and as directed.
Supply & fix MS base plate cup any type with screws of suitable size as per requirement complete all as specified and as directed.
Supply & fix heating element of the 1/1.5 KW rating as required at site including rubber washers of any make and type complete as per sample complete all as specified and as directed.
Supply & fix Steel inner tank of 25 litre capacity geyser tank by made out of steel sheets appropriate thickness complete all as specified and as directed.
Supply & fix thermostat suitable for the geysers of 25 Liters capacities complete all as specified and as directed.
Supply & fix auto cut suitable for the geysers of 25 Liters capacities complete all as specified and as directed.
Supply & Replace Air Release Valve suitable for geyser 25/50 ltrs complete all as specified and as directed.
Supply and Fix Rigid non-metallic PVC conduit 25mmexclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., complete all as specified and as directed.
Supply and Fix Rigid non-metallic PVC conduit 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., complete all as specified and as directed.
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.
M/s GM Constructions
G.CHANDRIAH AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .