REPAIR/MAINTENANCE OF SUMMER COOLING APPLIANCES, CEILING FAN, WALL FAN AND EXHAUST FAN UNDER GE NAGROTA.

Amount

Material and Labour for servicing of following appliances comprising of through cleaning, lubricating of all moving parts, replacement of wornout screws, bolts etc to make the unit for smooth operation for the following capacity of water cooler / refrigerator :-

Water coolers 40 to 150 ltrs capacity.

Refrigerator of 165 to 310 ltrs capacity.

Deep Freezers any capacity

S & F in replacement compressor sealed unit of the following appliances of any make complete including replacement of copper tubing/capillary strainer etc, testing and commissioning , complete all as specified and directed.

Water coolers of capacity up to 150 liters.

Refrigerators of capacity 210 to 310 ltrs.

Deep freezers 200 to 300 ltrs capacity.

S & F in replacement starting relay as per exiting make, complete all as specified and directed.

Water coolers 40 to 150 ltrs cooling capacity.

Refrigerator of 165 to 310 liters capacity

Deep freezers of 200 to 425 ltrs capacity

S & F in replacement thermostats of as per exiting make, complete all as specified and directed.

Water coolers 40 to 150 ltrs cooling capacity

Refrigerator of 165 to 310 liters capacity

Deep freezers of 200 to 325 ltrs capacity

Supply and charging refrigerant gas R-22/R-134 (A) up to required level including connected works like pressure testing with nitrogen before filling refrigerant gas including leakage testing if any, complete all as specified and directed.

Water cooler 40 ltr cooling cap.

Water cooler 80 ltr cooling cap.

Water cooler 150 ltrs cooling cap

Deep freezers of upto 320 Ltr capacity.

Refrigerators of upto 320 Ltr capacity.

S & F in replacement condenser unit of the following appliances including making of all connections, complete all as specified and directed.

Water coolers 40/60 ltrs capacity

Refrigerator of 165 to 195 ltrs capacity

Deep freezers of 200 to 300 ltrs capacity

S & F in replacement top cover gasket of water cooler 40 to 150 ltrs capacity, complete all as specified and directed.

S & F in replacement overload protector as per exiting make, complete all as specified and directed.

Water coolers/ Refrigarator upto 150 ltrs cooling capacity

Deep freezers of upto 425 ltrs capacity

S & F in replacement blower/condenser fan motor complete with necessary mounting bracket to and base frames, complete all as specified and directed.

Water coolers of any make and cap 40 to 150 ltrs capacity

Deep freezers of any make & cap 200 to 300 ltrs capacity

Supply and charging refrigerant gas R-22/R-134 (A) up to required level including connected works like pressure testing with nitrogen before filling refrigerant gas of Make Paragon,Mefron, complete all as specified and directed. (Note : Contractor will arrange crain / scaffolding with safety devices for work upto or above second floor and rate for the same deemed to included in quoted rate.)

Window type room air conditioners of capacity 1.5 Ton.

Split type AC 1.5/2.0 Ton capacity

M&L for servicing of following appliances comprising of through cleaning, lubricating of all moving parts, replacement of wornout screws, bolts etc to make the unit for smooth operation, complete all as specified and directed. (Note : Contractor will arrange crain / scaffolding with safety devices for work upto or above second floor and rate for the same deemed to included in quoted rate.)

Window type room air conditioners of capacity 1.5 Ton cap.

Split type AC 1.5/2 Ton capacity.

S & F in replacement compressor sealed unit of the following appliances of any make including replacement of copper tubing/capillary strainer etc, testing and commissioning, complete all as specified and directed.

Window type air conditioners of capacity 1.5/1 Ton.

Split type AC 1.5/2.0 Ton capacity.

S & F in replacement capacitors of the following capacities for ACs complete all as specified and directed.

45+6 Mfd seven pin

S & F in replacement starting relay suitable, complete all as specified and directed.

Window type room air conditioners of capacity 1/1.5 Ton capacity

Split type AC 1.5/2 Ton capacity

S & F in replacement thermostats suitable, complete all as specified and directed.

Window type room air conditioners of capacity 1/1.5 Ton capacity

Split type AC 1.5/2 Ton capacity

S & F in replacement oeverload protector , complete all as specified and directed.

Window type room air conditioners of capacity 1/1.5 Ton capacity

Split type AC 1.5/2 Ton capacity

S & F in replacement condenser unit make of copper of following appliances including making of all connections , complete all as specified and directed.

Window type room air conditioners of capacity 1/1.5 Ton capacity

Split type AC 1.5/2 Ton capacity

S & F in replacement metal clad/sheet metal plug and socket with a 2 pin and earth plug and 20 Amps SP MCB including making all connections, complete all as specified and directed.

S & F in replacement contact unit of split type air conditioning of 1.5/2 Ton cap model 3100-150-1961C or equivalent, complete all as specified and directed.

M & L voltage stabilizers AC single phase. 2 to 5 KVA of any make by opening of the body, cleaning of internally, checking and tigtening of all terminal connections including replacement of worn out terminal connectors, screws, bolts, complete all as specified and directed.

S & F in replacement of defective burnt motor from unit and testing, complete all as specified and directed.

Window type room air conditioners of capacity 1/1.5 Ton capacity

Split type AC 1.5/2 Ton capacity

S & F in replacement insulation for copper tubes of split type AC units,insulation type superion of sizen 3/8"diameter, complete all as specified and directed.

S & F in replacement insulation for copper tubes of split type AC units,insulation type superion of sizen 5/8"diameter, complete all as specified and directed.

S & F copper tubing soft grade suitable for split type AC suction /discharge line of size 5/8" diameter, complete all as specified and directed.

S & F in replacement copper tubing soft grade suitable for split type AC suction /discharge line of size 3/8" diameter, complete all as specified and directed.

S & F in replacement PCB cercuit board complte suitable for 1.5/2.0 ton capacity split type AC complete all as specified and directed.

S & F in replacement PCB cercuit board complte suitable for 1.5/2.0 ton capacity window type AC, complete all as specified and directed.

S & F in replacement Remote of any size and capacity of split AC as per existing make, complete all as specified and directed.

S & F in replacement of indoor cooling unit 1.5 Ton capacity copper tubing with rotary fan suitable of existing make with suitable remote , complete all as specified and directed.

S & F in replacement of desert cooler 1350 RPM capacity motor single phase 215 V three speed with fan blade, complete all as specified and directed.

S & F in replacement of water circulation submersible pump of desert cooler suitable for operation on AC supply single phase 230/250 volts 50 Hz , complete all as specified and directed.

Taking out existing old wood wool pads from desert coolers and S&F wood wool pads with nylon threads suitable for any make of desert cooler having minimum/maximum capacity 3000 cum/hr and 5000 cum hrs including PVC insulated protective guards for holding the wood pads, complete all as specified and directed.

S & F in replacement of PVC water distribution system 4 way suitable for 3000/4000 Cum/Hrs of desert coolers complete with PVC Elbow, PVC Pipe (distribution system to side panel with elbow at end ) heavy duty 15mm dia, complete all as specified and directed.

S & F in replacement of unserviceable side panels with wood wool 2" thick for desert cooler made out of 22 gauge plane GI sheet of existing size of desert cooler (Each set of three panels), complete all as specified and directed. )

Painting of desert coolers in side out side at site of work with two coats of synthetic enamel paint grey or any other shade (as approved) from out side complete including shutters top, bottom with spray painting machine and in side with black anti – corrosive paint (two coats), complete all as specified and directed.

Disconnecting and taking down unserviceable Ceiling Fan, 1400/1200 mm sweep , 230 Volts AC supply Elecric driven single phasefrom position for winding and refixing for the same after winding, necessary connection, complete all as specified and directed. Note: Winding shall be measured and paid in respective item.

All as per ser itme no. 39.00 here in before but exhaust fan of size 450/380/300/255mm sweep

All as per ser item no 39.00 here in before but wall mounted fan of size 450/400 mm sweep

M&L for collecting unserviceable ceiling fans 1200mm sweep 230 v, AC supply, single phase from E/M store yard of GE Nagrota , Dismantling the ceiling fan and taking out complete burnt winding from fan motor and rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling , greesing & painting with one coat of syntetic enemel paint after scrbbing and perparing the old painted surface of the fan with and including replacement of rusted /unserviceable nuts, bolts split pin rubber reel , machine screws, shaft etc including replacement of defective / unserviceable parts / spares as required reassembling the fan and testing complete deposinging the complete repaired fan to E/M store yard of GE Nagrota including transportation, complete all as specified and derected.

All as per ser itme no. 42.00 here in before but ceiling fan of size 1400mm sweep

M&L for collecting unserviceable exhaust fan 450mm sweep 230 V, AC supply, single phase from E/M store yard of GE Nagrota , Dismantling the exhaust fan and taking out complete burnt winding from exhaust fan motor and rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling & greesing painting with one coat of syntetic enemel paint after scrbbing and perparing the old painted surface replacement of rubber pads and depositing the exhaust fan to E/M store yard GE Nagrota including transportation and testing etc complete all as specified and derected.

All as per ser item no 44.00 here in before but exhaust fan of size 380 mm sweep

All as per ser item no 44.00 here in before but exhaust fan of size 300 mm sweep

M&L for collecting unserviceable PVC exhaust fan 250mm sweep 230 V, AC supply, single phase from E/M store yard of GE Nagrota , Dismantling the exhaust fan and taking out complete burnt winding from PVC exhaust fan motor and rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling & greesing and depositing the exhaust fan to E/M store yard GE Nagrota including transportation and testing etc, complete all as specified and derected.

M&L for collecting unserviceable wall mounted fan 450/400mm, sweep 230 V, AC supply, single phase from E/M store yard of GE Nagrota , Dismantling the wall mounted fan and taking out complete burnt winding from wall mounted fan motor and rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling & greesing painting with one coat of syntetic enemel paint after scrbbing and perparing the old painted surface replacement of rubber pads and depositing the wall mounted fan to E/M store yard GE Nagrota including transportation and testing etc, complete all as specified and derected.

Taking down carefully from position , ceiling fan, 1400 mm sweep, 230 volts single phase 50 Hz from the position & removing/ cleaning of dust properly, oiling and greasing of bearing including necessary repairs and refixing and connecting up with all requisite accessories complete all as specified and directed. Note: Neccessary accessories paid seperately in respective item.

All as per ser item no 49.00 here in before but ceiling fan of size 1200 mm sweep

Taking down carefully exhaust fan 230 volts single phase 50 Hz 450 mm sweep from the position & removing/ cleaning of dust properly, oiling and greasing of bearing including necessary repairs and refixing and connecting up with all requisite accessories complete all as specified and directed. Note: Neccessary accessories paid seperately in respective item.

All as per ser item no 51.00.00 here in before but exhaust fan of size 300/380 mm sweep

Taking down carefully wall mounted fan 230 volts single phase 50 Hz 450 mm sweep from the position & removing/ cleaning of dust properly, oiling and greasing of bearing including necessary repairs and refixing and connecting up with all requisite accessories complete all as specified and directed. Note: Neccessary accessories paid seperately in respective item.

Supply only in replacement of gun metal bush of required size suitable for ceiling fans and exhaut fans, complete all as specified and directed

Supply only in replacement of hanger for ceiling fan 1200mm/ 1400 mm sweep with nuts, bolts, washers, complete all as specified and directed.

Supply only in replacement ofaluminium blades for ceiling fan 1200 mm sweep, complete all as specified and directed.

Supply only in replacement of aluminium blades for ceiling fan 1400 mm sweep, complete all as specified and directed.

Supply only in replacement of bearing suitable for ceiling fan of any size, complete all as specified and directed.

Supply only in replacement of bearing suitable for Exhaust fan/Air circulator/wall mounted fan of any size, complete all as specified and directed .

M&L scrubbing and preparing the old painted surfaces of ceiling fan of size 1200/1400mm sweep complete including blade and painting the same with white duco paint and writing the MES Nos of the fans, 25mm with black synthetic enamel paint and including oiling greasing of any make, complete all as specefied and directed.

M&L scrubbing and preparing the old painted surfaces of exhaust fan of size 300/450mm sweep complete including blade and painting the same with white duco paint and writing the MES Nos of the fans, 25mm with black synthetic enamel paint and including oiling greasing of any make, complete all as specefied and directed.

Supply & Fix canopy top and bottom for ceiling fans, complete all a spcified and directed.

S & F in repairs flexible twin core 23/0.0076 with copper conductor including connecting fan of any make, complete all as specified and directed.

S&F in replacement 300mm long fan down rod with clamp heavy duty as required, complete all as specified and directed.

S&F in replacement exhaust fan frame made out of MS sheet of any make and size of exhaust fan with suitable size of nut bolt and washers, complete all as specified and directed

Material and labour for replacement of Unserviceable Louvers with new louvers of exhaust fan 450mm sweep, complete all as specified and directed.

Material and labour for replacement of Unserviceable Louvers with new louvers of exhaust fan 300/380 mm sweep, complete all as specified and directed.

S&F in repairs oil filled condenser of 3.15 MFD capacity after removing existing unserviceable condenser from any situation, complete all as specified and directed.

S&F in repairs oil filled condenser above 3.15 and upto 4 MFD capacity after removing existing unserviceable condenser from any situation, complete all as specified and directed.

S & F Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required, complete all as specified and directed

S&F in replacement blade suitable for wall mounted fan 400/450 mm sweep fan, complete all as specified and directed

Supply & fix in replacement for shackle assembly for ceiling fan, complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs. 1,12,222.50 during AOC Note:- Tenderers shall not quote for this Schedule

Kalsi Engineers and contractors

R K BUILDERS

Hi Tech Engineers