REPAIR MAINT OF COMPOUND BDY WALL GATE HARD STANDING FOOTPATH FENCING ETC AT 19 AD REGT UNDER GE I GOS

Amount

Dismantling of existing RCC/ Steel /Wooden posts or struts (wood, steel or R.C.C.) any section,concrete ,brick work ,massonery etc . including taking out embedded portion and making good disturbed ground complete all speciified and directed

Demolation of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc,complete all as specified and directed

M & L brick work with fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:4 completed all as specified and directed.

M & L for cement concrete 1:2:4,Type B1(20 mm graded stone aggregate as in Post hole and mass concrete complete all as specified and as directed.

M&L, 15mm thick rendering in CM (1:4) on fair faces of brick/concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new decorated surfaces of wall applying two coat of cement base paintover a coat primer complete all speciified and directedall as specified.

M&L, 15mm thick rendering in CM (1:4) on fair faces of brick/concrete surfaces, finished even and smooth without using extra cement with preparation of new decorated surfaces of wall applying two coat of cement base paint including taking down cement plaster complete all speciified and directedall as specified.

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in Coping incl necessary form work finished even & smooth with using pigment in cement complete all as specified and directed

S&F, angle iron (Fe-310) as in posts, struts in fencing including cutting top to shape required, drilling holes, notching for wire etc complete all speciified and directed

S&F in repair, galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire complete all speciified and directed

M&L for preparation of new steel/iron surfaces exceeding 10cm width or girth applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all speciified and directed

M&L for preparation of new decorated surfaces of wall applying two coat of cement base paint complete all speciified and directed

Dismantling / taking down chain link fencing, any size or type,and removing the site complete all speciified and directed

S&F, angle iron (Fe-310) as in posts, struts in fencing including cutting top to shape required, drilling holes, notching for wire etc complete all speciified and directed

S&F PVC coated chain link fencing 100 x 100 mm mesh size made out of GI wire from 2.5 to 2.85 mm dia having minimum 1mm thick PVC coating over it including inner woven wire.Weight of wire mess not exc 4kg/sqm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all speciified and directed

Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia complete all speciified and directed

S&F steel flat iron including necessary drilling hole bolting or reveting etc and similar work complete conforming to Fe -290 Gde E - 165

M&L, for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all speciified and directed

M&L for preparation of new steel/iron surfaces not exceeding 10cm width or girth applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all speciified and directed

S & F in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete ( conforming to Fe-290 Gde E-165 ) including Dismantling wrought iron or mild steel work of any description complete all speciified and directed

Demolition of Cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified directed

M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc. complete all as specified and directed

S & F in repair for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed:

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in Coping incl necessary form work finished even & smooth with using pigment in cement complete all as specified and directed

M & L for 100 mm thick PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.

M & L for 50 mm thick Cement concrete 1:2:4 , type B-1 as in flooring including finishing cement concrete surface even and smooth without using extra cement in complete all as specified and directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including screed bed or bedding layer 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including demolition Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed..

Demolition of Cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified directed

Excavation in trenches n.exc 1.5M wide n.exc 1.5M depth for foundation etc or for shafts, wells cesspits manholes pier holes etc n.exc 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass filling concrete etc including necessary formwork complete all as specified and directed

M & L for Walling of squared rubble, uncoursed, well bonded, bedded and solidly hearted, built in walling brought to courses built in CM 1:6 complete all as specified and directed

M & L for flush point on RR masonary wall in CM 1:4 complete all as specified and directed

M & L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in drains / man hole base channels complete all speciified and directed

M & L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in surface channels and finishing complete all speciified and directed

M & L for Extra for forming fair finished drain or channel 30cm inner girth in cement concret, using extra cement, including forms, moulds, initred/stopped ends complete all speciified and directed

Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm using excavated soil complete all as specified and directed

S & F in RCC precast cement concrete cover slab 1:2:4 type B-1using 20 mm graded stone aggregate including Demolition of reinforcde Cement concrete Concrete of any description complete all as specified and directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S & F steel work in tubular stanchion/post including special shaped washer etc. complete using one of more tubes or induction butt welded tubes conforming to IS-1161- 1979 grade St.-240 complete all as specified and directed.

S & F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.(Fe - 290 (Gde E-165)

S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , including Ridge fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc) sheets & ridge in roof coverings complete all as specified and directed.

S & F 0.50 mm thick Pre-painted galvalume aluminum zinc coating GIbased Plain steel sheet / Ridge any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ffixed with self tapping screws including Dismantling asbestos cement (corrugated, semi corrugated etc) sheets & ridge in roof coverings complete all as specified and directed.

M & L for Cutting holes in brick walls in cement mortar for inserting holdfasts steel brackers etc exc half brick but not exc one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M & L for prepration of old surface of walls by washing rubbing and applying one coat of cement based paint complete all as specified.and directed. .

R K Traders

M/s Ats Electricals

M/s MAA BHAIRABI ENTERPRISES

DHABALESWAR ENGINEERING WORKS

M/S JAGANNATH SASMAL

M/S S.K GHOSE

M/S SIWALIK AND CO