Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.9 LQualified | L1 | Qualified MII | |
| 2 | L2₹6.1 L+₹19,870 (3.39%)Qualified 144 VIKAS BAZAR MATHURA UP 281001 | MATHURA | MATHURA | UTTAR PRADESH | 281001 | L2 | Qualified MSE, MII, Category: General | |
| 3 | L3₹6.4 L+₹57,642 (9.84%)Qualified 37 TILAK NAGAR MATHURA GERNAL GANJ MATHURA UTTAR PRADESH 281001 | MATHURA | UTTAR PRADESH | 281001 | L3 | Qualified MSE, MII, Category: General | |
| 4 | L4₹8.2 L+₹2.3 L (39.5%)Qualified | L4 | Qualified MSE, MII, Category: General | |
| 5 | Disqualified | - | Disqualified MSE, MII, Category: General |
Tender Value
Refer Docs
EMD Value
₹18,000
Closing Date
23 Jan 2023, 4:00 pmClosed
PROVN OF SCADA SYSTEM AT MATHURA CANTT UNDER GE
4269665
GEM/2023/B/2986109
Two Packet Bid
PROVN OF SCADA SYSTEM AT MATHURA CANTT UNDER GE West MATHURA DELEGATED WORK AGAINST CONTEGENCIES,PR
90 days
Uttar Pradesh; Mathura
Total value wise evaluation
BOQ
5 documents required · 5 mandatory
3 yrs
₹3
30%
₹18,000
23 Jan 2023
13 Jan 2023
23 Jan 2023
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | PROVN OF SCADA SYSTEM AT MATHURA CANTT UNDER GE West MATHURA DELEGATED WORK AGAINST CONTEGENCIES | Earthing complete with galvanised steel earth plate electrode 60�60cm.� 6mm thick, buried directly in ground earth pit not less than 2.25 metres deep below ground level with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised 4 mm dia wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. | 10 | Nos | GEWestMathura | 90 |
| 2 | PROVN OF SCADA SYSTEM AT MATHURA CANTT UNDER GE West MATHURA DELEGATED WORK AGAINST CONTEGENCIES | Supply , assembly and erection of GI sheet with C & SS rectangular or square duct made out of L shaped hollow profile, duly factory boxed, incl all accessories such as Corner, Cleat, Carriage bolt, Gasket and appropriate sealant on longitudinal joints etc complete of size 24 Gauge | 33 | Sqm | GEWestMathura | 90 |
| 3 | PROVN OF SCADA SYSTEM AT MATHURA CANTT UNDER GE West MATHURA DELEGATED WORK AGAINST CONTEGENCIES | Cement concrete 1,2,4 ratio type B-2 using 40 mm graded stone aggregate for foundation of pole,struts,stay assembly etc. | 4 | Cum | GEWestMathura | 90 |
| 4 | PROVN OF SCADA SYSTEM AT MATHURA CANTT UNDER GE West MATHURA DELEGATED WORK AGAINST CONTEGENCIES | Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced area exc 500 sqcm & not exceeding 0.1 sqm | 1,120 | Depth in Cm | GEWestMathura | 90 |
| 5 | PROVN OF SCADA SYSTEM AT MATHURA CANTT UNDER GE West MATHURA DELEGATED WORK AGAINST CONTEGENCIES | M&L Framed work such as grills, gratings, etc. with ends of bars shouldered or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framework of water tanks and similar work conforming to Fe.290.Gde-E-165 | 1,896 | Kgs | GEWestMathura | 90 |
| 6 | PROVN OF SCADA SYSTEM AT MATHURA CANTT UNDER GE West MATHURA DELEGATED WORK AGAINST CONTEGENCIES | Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire annealed not less than 0.9mm in dia weight per sqm not exceeding 4 kg. | 475 | Kgs | GEWestMathura | 90 |
| 7 | PROVN OF SCADA SYSTEM AT MATHURA CANTT UNDER GE West MATHURA DELEGATED WORK AGAINST CONTEGENCIES | M&L preparation of new steel surface & exc 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete. | 468 | Sqm | GEWestMathura | 90 |
| 8 | PROVN OF SCADA SYSTEM AT MATHURA CANTT UNDER GE West MATHURA DELEGATED WORK AGAINST CONTEGENCIES | M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | 50 | Sqm | GEWestMathura | 90 |
| 9 | PROVN OF SCADA SYSTEM AT MATHURA CANTT UNDER GE West MATHURA DELEGATED WORK AGAINST CONTEGENCIES | Earthing complete with galvanised steel earth plate electrode 60�60cm.� 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth strip 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. | 22 | Nos | GEWestMathura | 90 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_4269665.pdf
GEM_BID
key-specification_2023-01-13-15-43-47_1cc83c83142a5a54d61b8409ccdefa9c.pdf
BOQ
boq_2023-01-13-15-43-47_24644ec7f025c487feb59fa0e47cd488.csv
BOQ
ATC_2cc66c45-8818-41f7-915a1673605716196_BUYCWEMTR.docx
OTHER
gtc.pdf
OTHER
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .