GE U(N) 28 2023 24 REPAIR MAINT OF GATE RETAINING WALL DRAIN PAVED AREA AND CONNECTED ITEMS CH AND ADJOINING AREA UNDER AGE B R 1 OF GE (NORTH ) UDHAMPUR

Amount

M&L for demolition / dismantling of brick work/stone masonry built in cement mortar and removal of rubbish from sitecomplete all as specified and directed by Engr in charge.

M&L for Walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed by Engr in charge.

M&L for Walling of random rubble masonry (Except Stone), uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and directed by Engr in charge. Note: Serviceable quantity of stone obtained from sl item no 1 above shall be reused under this item.

M&L for flush pointing to random rubble masonary uncoursed or brought upto courses in cm 1:4 complete all as specified and directed by Engr in charge.

M&L for flush pointing to random rubble masonary uncoursed or brought upto courses in cm 1:4 including raking out of joints in repair work complete all as specified and directed

M&L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM1:4 complete all as specified and directed by Engr in charge.

M&L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM1:4 including racking out jionts in repair work complete complete all as specified and directed by Engr in charge.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius, using old size bricks, built in cement mortar 1:6 ,complete all as specified and directed by Engr in charge.

All as per item No. 8 herein before, but except bricks. Note-Old bricks obtained against dismantling/ demolition shall be used.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etccomplete including removal of debris obtain from taking down of plaster outside of MD land as specified and directed by Engr in charge.

M&L for 15 mm thick rendering CM 1:4 on fair faces of brick work or concrete surface including finished even and fair complete all as specified and directed by Engr in charge.

M&L for for preparation of new plastered surfaces of walls and applying two coats of cement based paint white or tinted complete all as specified and as directed by Engr-in-charge.

M&L for preparation of plastered or unplastered old surfaces of walls, chajja, balcony,facia etc by brooming down or steel wire brushing, scraping down smoke soots ,moulds ,moss efforescent salls,treating oil and greasy spots etc, and applying one coat of cement base paint of any approved colour , complete all as specified .

M& L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete complete all as specified and directed by Engr in charge.

M&L for cement concrete type B2 1:2:4 (40mm graded aggregate) in surface channels and drainscomplete all as specified and directed by Engr in charge.

M&L for demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for cement concrete complete all as specified and as directed. .

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed. .

M&L for dismantling/ demolition of wrought iron/ mild steel / steel works of any description and in any position , complete all as specified and as directed by Engr-in-charge.

M&L for Framed work such as grills, gratings, hold fasts etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, ladders framed balusters, and similar work conforming to Fe-290-0 or Fe-310-0, incl portions framed and hung as gates, pintle hinges,stops,hand-made sliding bolts etc.complete all as specified and directed by Engr in charge.

M&L for Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided forcomplete all as specified and directed by Engr in charge.

M&L for Providing precast cement concrete louvres and jallies type B-0 (1:2:4) using 12.5mm graded aggregate ,25mm thick (measured solid), including all mould- ings but excluding frame set in cement mortar 1:4 complete all as specified and as directed

M&L for Reinforced cement concrete (nominal mix) type B-1 1:2:4 using 20mm graded aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr in charge.

M&L for providing reinforced cement concrete nominal mix (1:2:4) type B-1 using 20mm graded aggregate asseismic and other similar bands, plinth courses, string courses complete all as specified and directed by Engr in charge.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finisg all as specified and as directed

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr in charge.

M&L for TMT bars 6to 8 mm dia as in stirrups for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engr in charge.

M&L for preparing painting on sreel surfaces of any description over 10cm in width or girth, on new surface over a coat of red oxide zin primer and two coat of synthetic enameled paint over it complete all as specified and directed by Engr in charge.

M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed by Engr in charge.

M&L for Machine pressed rubber moulded manufactured/compacted by vibrating table method pre-cast concrete interlocking paver block Laquor finish any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sandcomplete all as specified and directed by Engr in charge.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr in charge.

M&L for Refixing of interlocking tiles of any thickness laid dry in position over sand cushioning including dismantling of existing tiles, complete complete all as specified and directed by Engr in charge.

M&L for Cement concrete 100mm thick type B-1, 1:2:4 (20mm graded aggregate) as in floor including cutting of joints as per site requirement including filling of joints as per approved materials complete all as specified and directed by Engr in charge.

M&L for Cement concrete 100mm thick type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floor complete all as specified and directed by Engr in charge.

Pre-cast cement concrete block type B-1 (1:2:4) 20mm graded aggregate as in kerb stone set in cement mortar 1:4 masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete complete all as specified and directed by Engr in charge.

Demolition Stone slabs and tiles laid dry or dry beded or pointed of any description or thickness in floors, aprons etc complete all as specified and directed by Engineer in charge

M & L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like one piece full in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr in charge.

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing and rubbish off the premises out side MD land without extra charge of Govt. complete all as specified and directed by Engineer in charge

S&F factory made heavy duty full body digital matt finish, paving coloured tiles of size 300mm x 300mm x 10mm thick for external use laid over and including 15mm thick screed bed or bedding layer in CM 1:4 including jointed with neat cement slurry and pointed in coloured tile epoxy grout to match the shade of tiles complete all as specified and directed by Engr in charge.

M&L for RCC Nominal mix using 20mm graded aggregate (1:2:4) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr in charge.

M&L formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed by Engr in charge.

M&L for reinforced cement concrete nominal mix using 20mm graded aggregate type B-1(1:2:4) as in ( Columns, pillars, piers, posts and struts complete all as specified and directed by Engr in charge.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed by Engr in charge.

S&F In repair alumnium composit panel (ACP) sheet 4mm thick as in gate portion of height up to 8Mtr in any desired shape square/ rectangular and having any desired colour and gaps filling with silicon sealent including frame work of back side of ACP panel by using suitable material like MS angle etc complete all as specified and directed by Engr in charge.

MADAN LAL SHARMA AND SONS

KUMAR CONSTRUCTION CO

MAHAJAN TRADING CO

M/s AKHIL SHARMA

M/S PARDEEP KUMAR

pargal builders

SHIVAE CONSTRUCTION