PROVN OF SECURITY GATE AT UTTAR DWAR AT ENTRANCE INCLUDING SPECIAL REPAIR TO TRAINING TRACK AND OTHER WORKS UNDER GE I GOS

Amount

Excavation in trenches in soft / loose soil, not exceeding 1.5 metre wide & not exceeding 1.5 metre deep; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan including getting out, complete all as specified and directed.

Excavation in trenches in soft / loose soil, not exceeding 1.5 metre wide & depth exceeding 1.5 metre but not exceeding 3.00 metre deep; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan including getting out, complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling & mass concrete complete all as specified and directed.

M&L for Reinforced Cement Concrete (design mix) M-30 (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles & mass concrete complete all as specified and directed.

M&L for Reinforced Cement Concrete (design mix) M-30 (20 mm graded aggregate) in Columns, pillars, piers, posts & struts complete all as specified and directed.

M&L for TMT Bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.90mm dia or securing with clips. complete all as specified and directed.

M&L for TMT Bars 5 mm dia & over upto & including 10 mm dia in stirrups, spaces & binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.90mm dia or securing with clips. complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits (if any) of foundation & plinth beams; & similar work; vertical or to batter for fair finished surfaces. complete all as specified and directed.

M&L for Formwork to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns & stanchions for fair finished surfaces. complete all as specified and directed.

Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing surplus excavated material (soil) to a distance not exceeding 50 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point, including spreading. complete all as specified and directed.

M&L Khandolite stone tile size not less than 8 mm thick and 300mm x 150mm and shall be fixed to wall & jointed in slurry over and including 15 mm thick bedding layer in CM 1:3 exposed surface, shall machine cut & polished complete all as specified and directed.

S&F Framed work as in Ornamental doors or gates of any size & shape, made of decorative element, angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (inclusive of steel, sheeting or other covering, running rails & guides if required) & hanging; also fastening & fixing including rollers for smooth functioning of gate complete of Fe410-W(Gde-E-250) quality-A. complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of any description, over 10 cm in width or girth, not otherwise described & apply two coat of synthetic enamel (ordinary tint) over & including one coat of red oxide, zinc chrome primer. complete all as specified and directed.

M&L for Hardcore of broken stone or boulders of guage n exc. 63 mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface. complete all as specified and directed.

M&L for 100 mm thick Cement concrete type D-2, 1:4:8 using 40 mm graded stone aggregate as in subbase. complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60mm thickness M-35 grade laid, jointed. complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering & consolidation. complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) in ground floors & pavings n exc 15 cm thickness (below or above ground level). complete all as specified and directed.

M&L for repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces not exc. 50mm deep in area not exceeding 400 sqm including removing the material from MD area the same work complete all as specified and directed.

M & L for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of limestone,sand stone, Flint or quartizite, grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient materials and camber required complete all as specified and directed.

All as per item No.22 above but except materials.

Preparing existing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with bituminous primer at 10 kg per 10 sq metres of paving bitumen (VG 30) complete all as specified and directed.

Preparing existing blacktop surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 sq metres of paving bitumen (VG 30) complete all as specified and directed.

M&L for premix bituminous macadam with 4% binder paving bitumen (VG 10) content by weight of total mix laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) and rolled with power roller 8 to 10 ton complete all as specified and directed.

M&L for laying and spreading of bituminous pemixed asphaltic semi dense concrete 40 mm cnsolidated thickness with 5.5% binder content by weight of total mix rolled and compacted to required camber and gradient complete using paving bitumen (VG 30) any penetration. ( The SDAC laid with mechanical paver and rolled with 8-10 tonne tandom power roller) complete all as specified and directed.

M&L for preparation of new/old surface of road and applying 1.0mm thick and 100 mm wide reflective resign thermoplastic paint by hot application of approved colour/make complete all as specified and directed.

S&F of colour reflective pavement marker (cat eye) with micro prismatic lens in both direction having thermoplastic body with flex resistant base & abrasion resistant creamer coating fixing of road surface with special adhesive and Suitable rivet head nail complete all as specified and directed

S&F Sparkle solar road studs size 125 mm x 125 mm x 90 mm ht with detachable battry 6 LEDs three on each side, ultra bright LED in red/yellow colours completely water resistant and weather proof, using of adhesive and fixing procedure as per manufacturer supervision of their competent technician etc complete all as specified and directed.

S&F "Sparkle road side delineators with tri colour reflector and 150mm wide reflectro radium sticker pasted over painted MS pipes approx 100mm dia and 100 cm long fixed in cement concrete bedding 150mmx150mmx300mm, 1:3:6 type C-1 (using 20 mm graded aggregate incl necessary earth work complete all as specified and directed.

S & F Alcolite spring post/flexible delenator, strong flexible UV protected PU & PVC with high intensity reflective light material crystal lattice, 75mm dia 750mm height including all necessary fittings complete all as specified and directed.

M&L for 75 mm thick spread thickness Moorum/red bajri spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

Supply , laying and testing XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, with aluminium conductor 1100 V grade, laid in trenches/along poles, ducts or through sleeve of size 16 spmm 4 core cimplete all as specified and directed.

Supply and laying flyash building bricks laid in trenches for LT cable protection with length of brick perpendicular to length of cable complete all as specified and directed.

S&F in replacement of 3 core 1.5 sqmm copper conductor PVC sheathed cable, with 15mm dia PVC rigid conduit duly clamped to poles complete all as specified and directed.

S&F Polycarbonate cable junction box of size 22x25x20 cm Halongen free and weather proof for outdoor installation IP-66 Protection with metric knock outs for cable entry including two nos bus bar fixed with suitable size nuts & bolts with and including S & F MCB single pole 6-32 Amps complete all specified and directed

Supply and fix post-top lantern 70 watt Tycoon opal energy saving, environmental friendly, long life aesthetically designed with IP 65 symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source complete all as specified and directed.

M&L in replacement of LED flood lights of cap 300 W cap D-clamp fitting of powder coated pressure die cast aluminium IP66 High power LED with heat resistant toughed glass with connected accessories complete all as specifed and directed.

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable, screened PVC bedded, with aluminium conductor 1100 V grade, laid in trenches/along poles, ducts or through sleeve of size 25 sqmm 4 core complete all as specified and directed.

Boring across the road/hard surface with mechanical bore equipments not less than 40mm bore complete all as specified and directed

M & L for modification of Existing LT Panel busbar for fixing of MCCB 40 Amp TPN including complete all as specified and directed.

S&F 40mm bore galvanised steel tubing light grade including all fittings, laid in trenches , fixed to walls or on poles complete all as specified and as directed.