Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹45.2 L+₹2.1 L (4.92%)Rejected-AOC | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹45.5 L+₹2.5 L (5.77%)Rejected-AOC | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹45.7 L+₹2.7 L (6.27%)Rejected-AOC RAM JANAKI THAKURBARI J T ROAD DIMAPUR 797112 NAGALAND | DIMAPUR | NAGALAND | 797112 | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹46.9 L+₹3.9 L (8.96%)Rejected-AOC | L5 | Rejected-AOC Higher bid value |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
13 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
REPAIR REPLACEMENT OF UNSV PSOH TANK AND ALLIED WORKS
2024_MES_650278_1
8723/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D
Category a (ii)
2 documents required · 2 mandatory
₹500
GE 868 EWS
₹80,000
3 Jun 2024
17 Apr 2024
15 May 2024
17 Apr 2024
13 May 2024
30 Apr 2024
17 Apr 2024 - 24 Apr 2024
Amount
Dismantling and taking down old unserviceable pressed steel plate of pressed steel overhead tank such as pressed steel sheets of any size, internal bracing nuts and bolts, top cover, angle iron channel, float and all water supply connections to tank of capacity 20000 Glns at 15 mtrs height and staking serviceable materials from site of work etc complete all as specified and as directed. NOTE -(i) Work has to be carried out at 15 mtrs height above ground level. (ii) All safety measurers for the labour to be provided by contractor.
All as per item No 01.00 (here-in-before) but 10000 Glns PSOH Tank.
All as per item No 01.00 (here-in-before) but 5000 Glns PSOH Tank
S & F PS plate of size 1.25m x 1.25m x 6 mm thick fixed to PS overhead tank bottom and first layer including all jointing materials such as good quality rubber gasket, lead wool wire, black putty etc. To make the joints leak proof etc complete all as specified and as directed.
All as per item No 04.00 (here-in-before) but 1.25m x 1.25m x 5 mm thick for second layer.
All as per item No 04.00 (here-in-before) but fixing only PS plate 5/6 mm thick including good quality rubber gasket, lead wool wire, black putty etc, to make the joints leak proof, including cutting/welding etc complete all as specified and as directed. (NOTE : Existing PS plate, nuts and bolts with washers which are retrieved item No 01&02 shall be re-used)
S&F mild steel angle size 65 mm x 65 mm x 6 mm for bracing supporting members of PS tank including cutting, welding, bending, drilling holes etc complete all as specified and directed.
S & F mild steel angle size 50 mm x 50 mm x 6 mm for bracing supporting members of PS tank including cutting, welding, bending, drilling holes etc complete all as specified and directed.
M & L for mild steel sheet, 3.15mm thick as in top cover of PS overhead tank etc complete all as specified and as directed.
M & L for preparation of painting new/old steel surfaces of PSOH tank internally (inside storage) applying two coats of hygienic bituninous paint over a coat of red oxide zinc chlorine and sealing surface previous treated with tar, bituminous compositions with one coat of knotting in preparation for painting suitable for drinking water purpose etc complete all as specified and as directed.
M & L for preparation of old painted/new-steel surfaces by scrapping & painting of steel overhead tanks external surface by applying two coats of Aluminium paint over a coat of red oxide primer incl suitable staging etc complete all as specified and as directed. .
Dismantling of exisitng butterfly valves 80mm/100mm/ 150mm dia including all necessary fittings etc complete all as specified and as directed.
Dismantling of existing Sluice Valves 80mm/100 mm dia including all necessary fittings etc complete all as specified and as directed.
Dismantling of existing Sluice Valves 150mm/200mm dia including all necessary fittings etc complete all as specified and as directed.
S & F sluice valve cast iron complete with all accessories and wheel confirming to IS-14846 specification, PN 1.6 for the following dia etc complete all as specified and as directed.
80 mm bore
100 mm bore
150 mm bore
200 mm bore
S & F butterfly valve cast iron complete with all accessories to IS-14846 specification, PN 1.6 for the following dia etc complete all as specified and as directed.
100 mm bore
150 mm bore
Dismantling of old UNSV steel water tubing including all necessary fitting of following sizes etc complete all as specified and as directed. .(Old material shall be the contractor properly for which credit will be gien by the contractor).
80 mm bore
100 mm bore
150 mm bore
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for laying of water supply pipe line n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil for the following dia etc complete all as specified and as directed.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil for the following dia etc complete all as specified and as directed.
Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point etc complete all as specified and as directed.
M & L for steel Water tubing (GI) Medium grade heavy duty ISI mark with all fittings complete with clips hooks etc for 150mm dia etc complete all as specified and as directed.
All as per item No 21.00 (here-in-before) but 100 mm dia.
All as per item No 21.00 (here-in-before) but 80 mm dia
M & L for construciton of valve chamber of size 1050mm x 1050mm x 1000mm size internal size including earth PCC foundation 1:3:6 of thickness 15 CM under masonry in cement mortar 1:4 complete with MS angle Iron frame 40mm x 6 mm and to MS cover 3.0mm thick with hinges and locking arrangements and holdfast including plastering of internal wall surfaces with cement mortar of 1:4 of thickness 10mm and coping on top of brick masonry with PCC 1:4 and 20 mm grade stone aggregate with thickness 7.5 cm including painting of steel surfaces with black bituminous paint over a coat of red oxide primer etc complete all as specified and as directed.
Supply and fixing CI/DI fitings such as Bends (any type, radius and angle) tappers any type (Straight, Bend, Increasing, decreasing or double sockets etc) Tee pieces single branches, 'Y' junctions, double branch cross (all socket or sockets end spigot) collars, caps and plugs complete of size up to 150 mm dia etc complete all as specified and as directed.
TOSHIKA SUMI
Shri B K Ukil
SHRI BANARSI PRASAD
das enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .