09 - Providing, Erecting and Fixing of Overhead Signs and SS Signs On Various Roads and Places at Shri Sanwaliyaji Mandir Mandal, Mandfiya

Providing and erecting Cautionary, Mandatory , Informatory, direction and place identification retro- reflectorised sign, Letters as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick as per approved drawing Direction and Place Identification Signs. As Approved By Engineer Incharge .

Providing and fixing stainless steel Section made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, With grouted in cc, firmly fixed to the ground & sheet fixed As Approved By Engineer Incharge, . Grade 304

Making foundation with Excavation in (All type of soil ) & M15 grade cement concrete 45 x 45 x 75 cm, 60 cm below ground level . As Approved By Engineer Incharge .

Providing and laying of hot applied thermoplastic compound (Asian) 2.5 mm thick including reflectorising glass beads (Potters Glass Beads,Reliance Thermoplast ) Moistureb Resistant @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on C.C./BT Surface With Colour As Approved By Engineer Incharge .

Supplying and Fixing of Cat’s Eye made of aluminium alloy size 75x 100x 22 mm having 21 biconvex lenses embedded in circular disk of ABS plastic on each side.

Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans Truss and Vertical Support

Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans Aluminium Alloy Plate for Over Head Sign Including Lettering and arrow marks

Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and MoRTH Specification Clause 801

Earthwork in excavation for structures as per drawing and MoRTH specifications Clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.Ordinary soil Upto 3 m depth

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6