WORK SCHEDULE : (Electrical Work) (A)JAKHIM Yard remodeling for increasing the CSL of DN side common loop and over run line in UP loop line for simultaneous reception & dispatch facility. (B)''Bagohi kusa Increasing of UP Long haul loop line at least upto 1400 Mtr. for accommodating long haul trains. (C)-Provision of over run line in DN loop line at GRRU Station "

A-Part A"'JAKHIM"Yard remodeling

Transportation of above cable from store to site. (supplied by Railway)

Supply of HDPE, Laying and drawing of HT / LT cables manually inside the pipe and proper connection to junction Box as per site requirement in all respect ( Size of cable HT / LT 3 core / 02 4 core from 50 sq mm to 240 sq. mm ), thickness of HDPE should not be less than 06 mm. HDPE will be laid down in the pucca Trench as per site requirement of Pucca Trench as well as HDPE should be Confirming to IS : 14333 1996 or latest , Thickness of Pipe Min. 5.3 mm and max. 5.9 mm ISI Marked, CM / L : 7395589 , Material Grade : PE 100 , Make of Pipe : Asian, Appollo Pipes, Vectus ,UTAKARSH

Supply of HDPE Pipe, Laying and drawing of HT / LT cables through Pressure machanism inside the pipe and proper connection to junction Box as per site requirement in all respect ( Size of cable HT / LT 3 core / 4 core from 50 sq mm to 240 sq. mm ), thickness of HDPE 03 should not be less than 06 mm. HDPE will be laid down in the pucca Trench as per site requirement of pucca trench as well as HDPE should be confirming to IS 14333 1966 or latest.Make of Pipe -Asian, Appollo pipes, Vectus, Utakarsh HDPE pipe , pressure rating at 30 Deg. centigdade : PN 6 , confirmity to IS : 4998 or latest. Thickness of pipe min. 5.3 mm and max. 5.9 mm ISIMarked , CM/L : 7395589, Material Grade : PE 100.

Wall clamping of cable on wall /bridge through suitable clamp of size 50x6 mm of MS flat or catenary of cable through 4 SWG GI wire with suitable clamps (As per site requrement)

Supply of street light Panel 63 Amp. Max load -12 Kw, contactor rating -65 A TP, MCB rating -63 A SPN, timer- Astronomical type.Make - Havells or similar.

"Fixing, testing and commissioning of Distribution Board , Street Light Panel etc.. "

Supply of RCCB current rating 16 Amp / in accordance with IS 12640-1) / 240 V, 50 Hz with 10 KA short circuit withstand capacity 63 A (DP) 300 mA cat No. DHRGCTDF300063 of Havells. Make- Havells , C&S, indoasian, L&T.

Supply, Fixing , testing and commissioning of 4 pole 63 Amp MCCB / 440 V A.C with thermoplastic/ sheet steel enclosure Make Siemens, Havells, Standard.

supply, fixing, testing and commissioning of 4 pole 100 Amp MCCB with sheet steel enclosure. Make :Siemens, L&T, Havells,ABB , Indoasian ( Optium )

"Supply, Fixing , testing and commissioning of MCCB DB for distribution of 3 phase 10 supply 415 volt AC comprising with following For incoming : 1 ) MCCB 4 pole 100 A - 01 nos, make Siemens cat no. 3VT82161 A A - 040 A A Z OR Equivalent . For Outgoing : 1) MCB SP 06 A to 32 Amp - 08 Nos . (as per site requirement) , 3 ) Beta bus plus vertical Bus Bar DBs with MCCB incoming Cat. No. 8GB31571RC . Make of MCCB : Indoasian ( Optium ) , Siemens , L&T , Havells , ABB"

Making of Earthing pit 15' deep with Cooper plate of size 600 mm x 500 m x 3.15 mm 11 with its top to Ground level complete with 20 mm dia GI pipe fitted with alternate Layers of Charcoal and salt at least 150 mm thick around, funnel for waterig and one earthing lead 20 mm x 3mm copper strip in Gl pipe 30 mm medium gauge, masonary/housing with CI hinged cover- plate with locking arrangement complete in all respect (Copper strip up to ground level to be supplied).

Supply and connection of GI strip 50 X 6 / 25 X 6 mm flat for connection to Earth. Size of Strip may be changed as per site requirement

Supply & erection of earthpit as per IS 3043 GI pipe used in size of 50 mm dia x3 mtrs long medium gauge with alternate layer of charcoal and salt as per Sr. DEE(G) drg no MGS/EL/G/Drg/01/08-09 dt 08.08.08 .Make of GI pipe :Tata, Jindal, Bansal

Providing and fixing of medium grade GI pipe size of 50 mm dia complete with GI fittings including trenching and reffiling etc for cable protection.(Shell thickness 3.6 mm. Minimum wt. 5.03 Kg/mtr. Make:- Jindal, Tata, Bansal.

Supply of Thermoplastic Cable Junction Boxes IP 65 with metric knockouts for cable entry of size maximum upto 10- 25 Sq mm , Size of Jn. Box : 205mm x 255mm x 112 mm , Cat. No. with terminals DK 2500 G ( 4 Terminals ) . Make - HENSEL , Indoasian or similar .

"Fixing, testing and commissioning of above thermoplastic cable junction Box. "

"Supply of octagonal pole (Dip Galvanised in single dep average 70 micron) 6 mtrs. Long Top dia 70 mm , Bottom Dia. 135 mm. Sheet thickness 3 mm. in single section with base plate (220 x 220 x 12 mm L x B x H) with 700 mm Long Double Arm Bracket and 04 Nos. 16 mm dia. x 600 17 mm long (100 mm. thread projectional ), foundation Bolts , complete with smart pack junction Box with 6 A MCB and stud terminals (For mounting inside base plate) and Internal wiring for terminal to fitting with 2 x 2.5 Sq. mm. cable of Reputed make i.e. Polycab , finolex , Havells ,Anchor , Plaza ), The Octagonal Pole shall be hot galvanized in single dip to 86 micron , bearing max. wind speed of 169 Km / hr . Make of pole : Bajaj , Bansal , Jindal , Crompton "

"Erection and casting of Foundation for Octagonal Tubular pole with earth excavation with cement , concrete and sand (1 :3 :6) and muffing of Base Foundation as per manufacturers drawing and dimension as required under the suppression of site incharge. "

Supply and fixing of Fabrication outdoor type water proof MCCB enclosur, suitable for fixing of MCCB's upto 250 Amp. Cap to be fitted on Tr -D mast for provision of AT supply for Railway essential services. The size of enclosure should be of 28" X 12" X 8" ( H X W X D ) and made of CRCA 19 sheet steel of thickness of 16 SWG consisting of arrangement for proper incoming and outgoing power supply with 2" dia cable gland , fixture for base fixing arrangement on Tr - D mast , Provision of enclosure earthing and rain protected door & auto locking arrangement along with cleaning , finishing and painting with powder coating in approved shade as instructed by the site supervisor/engineer.

Supply of 20 mtr. Long high mast system with its accessories . Mast shaft shall be in 2 20 section , hot dip galvanised and suitable for wind velocity as per IS : 875 Pt. -3 it shall also include accessories light mast including head frame steel wire rope 6 mm dia suitable drum winch galvanised lantern carriage arrangement suitable for 12 luminaires symmetrically and its control gear boxes . The Mast shall have an integral power tool mounted at the base compartment for its operation. Make -Philips,Bajaj,Aster,BPP

Supply of foundation nut bolts manufactured from special steel along nuts, washer, Anchor plates and templates. Make - BPP, Philips,Bajaj,Aster.

Supply of twin dome aviation obstruction light of type BAJOL 2 with 2 Nos. incandescent lamp -100 W.

Supply of Control Panel Housing suitable control circuit for the mast. It shall also consist of suiatble control for the power tool motor duly ISI appvd. Make - BPP,Philips,Bajaj,Aster.

Design and casting of suitable shallow foundation with M-15 concrete for the high mast considering the soft soil bearing capacity at site as 10 T per sq. mtr. At 2 mtrs. depth with all materials , labours etc.

Erection of High Mast with the suitable equipment and wiring of lumnaires with all wiring material , labour etc.

Installation of control panel on suitable foundation including all material and labour.

Testing and commissioning of above High mast 20 mtrs.High.

Supply, Fixing, Testing and commissioning of power contactor 3 pole type MX mini 25 Amp ML 1.5 type 02 No + 02 NC (coil voltage 240 V / 50 Hz.) as per Cat No. :SS91851 of L&T as per IS 60947-4-1 with enclosure of hylum sheet , Insulator in GI Box of 8" x 6". Make -L&T, Siemens, ABB.

Supply of 250 W / 240 W Watt LED Flood light .Make - Philips, Crompton, Havells,Bajaj ( For High Mast )

"Supply of 80 W LED Flood light Cat No. : SLE FL 80 IP - 65 . Make - Philips , Bajaj , Havells , Crompton ( For octagonal Pole ) "

Fixing, testing and commissioning of LED flood light fittings with suitable clamps with safe arrangement as per site requirement.

B-Part B"''Bagohi kusa Increasing of UP Long haul loop line

Transportation of above cable from store to site. (supplied by Railway)

Supply of HDPE Pipe, Laying and drawing of HT / LT cables through Pressure machanism inside the pipe and proper connection to junction Box as per site requirement in all respect ( Size of cable HT / LT 3 core / 4 core from 50 sq mm to 240 sq. mm ), thickness of HDPE 02 should not be less than 06 mm. HDPE will be laid down in the pucca Trench as per site requirement of pucca trench as well as HDPE should be confirming to IS 14333 1966 or latest.Make of Pipe -Asian, Appollo pipes, Vectus, Utakarsh HDPE pipe , pressure rating at 30 Deg. centigdade : PN 6 , confirmity to IS : 4998 or latest. Thickness of pipe min. 5.3 mm and max. 5.9 mm ISIMarked , CM/L : 7395589, Material Grade : PE 100.

Supply of HDPE, Laying and drawing of HT / LT cables manually inside the pipe and proper connection to junction Box as per site requirement in all respect ( Size of cable HT / LT 3 core / 03 4 core from 50 sq mm to 240 sq. mm ), thickness of HDPE should not be less than 06 mm. HDPE will be laid down in the pucca Trench as per site requirement of Pucca Trench as well as HDPE should be Confirming to IS : 14333 1996 or latest , Thickness of Pipe Min. 5.3 mm and max. 5.9 mm ISI Marked, CM / L : 7395589 , Material Grade : PE 100 , Make of Pipe : Asian, Appollo Pipes, Vectus ,UTAKARSH

Wall clamping of cable on wall /bridge through suitable clamp of size 50x6 mm of MS flat or catenary of cable through 4 SWG GI wire with suitable clamps (As per site requrement)

Supply & Fixing of Thermoplastic Cable Junction Boxes IP 65 with metric knockouts for cable entry of size maximum upto 10- 25 Sq mm , Size of Jn. Box : 205mm x 255mm x 112 mm , Cat. No. with terminals DK 2500 G ( 4 Terminals ) . Make - HENSEL , Indoasian or similar .

Supply of SPN Distribution Board single Door 8 way Product code DHDNSHODAW08 of Havells. Make - Havells, Indoasian , Havells , C&S,

Supply of single pole 6 - 16-32 Amp , MCB. Make - Havells, Indoasian , Havells , C&S.

Supply of street light Panel 63 Amp. Max load -12 Kw, contactor rating -65 A TP, MCB rating -63 A SPN, timer- Astronomical type.Make - Havells or similar.

Supply of RCCB current rating 16 Amp / in accordance with IS 12640-1) / 240 V, 50 Hz with 10 KA short circuit withstand capacity 63 A (DP) 300 mA cat No. DHRGCTDF300063 of Havells. Make- Havells , C&S, indoasian, L&T.

"Fixing, testing and commissioning of Distribution Board , Street Light Panel , RCCB etc.. "

Supply of Air Circuit Breaker 4 Pole ACB with Static Trip Unit STU 34 (O/L short Circuit 11 Protection and earth fault Protection for 3 Ph & wire system ) drawout manual rated current 800 Amp. Code NH 800 IMIS with Enclosure and other required associated material. Make - , Siemens , ABB , L&T

Fixing , testing and commissioning of 4 Pole 800 AMP ACB 4 Pole with electrical wiring and other acessories

Supply, fixing,testing and commissioning of 4 Pole MCCB 200 Amp. Cat no. 3 VL 3720- 1 EC 46-OAAO, breaking Cap 40 KA with Sheet Steel / Thermoplastic Enclosure. Make - Indoasian ( Optium ) Siemens, L&T, Havells , ABB

Supply, Fixing, testing and commissioning of 4 pole 400 Amp MCCB with fixed thermal magnetic setting as per HPL Cat No. H 4 400 S4P , Cap. 50 KA . Make - Indoasian ( Optium ) Siemens, L&T, Havells , ABB

"Supply, Fixing , testing and commissioning of MCCB DB for distribution of 3 phase 15 supply 415 volt AC comprising with following For incoming : 1 ) MCCB 4 pole 100 A - 01 nos, make Siemens cat no. 3VT82161 A A - 040 A A Z OR Equivalent . For Outgoing : 1) MCB SP 06 A to 32 Amp - 08 Nos . (as per site requirement) , 3 ) Beta bus plus vertical Bus Bar DBs with MCCB incoming Cat. No. 8GB31571RC . Make of MCCB : Indoasian ( Optium ) , Siemens , L&T , Havells , ABB"

Supply, fixing, testing and commissioning of LT cubical panel board of Suitable to size of thickness 2 mm to adjust the of following switchgears 1) 4 pole 160 A capacity 415 volt AC MCCB - 02 nos. for INCOMING, make: ABB. GE, SIEMENS, L&T, HAVELLS STANDARD, 2) 4 Pole 63 A capacity 16 415 volt AC MCCB - 04no. for OUTGOING: ABB, GE, SIEMENS, L&T, HAVELLS, Indoasian ( Optium ), complete in all respect , 03 )- SP 32 Amp. MCB = 16 Nos. as outgoing 4) 4 Pole 200 Amp. On Load Changeover switch = 01 No. 5) voltmeter (0 - 500) with selector switch ammeter with selector switch of make: Kaycee, AE with CT 400/5 of make KAPPA and copper busbar 400Amp of requiste size as per panel size of 3 phase and neutral with other accessories complete in all respect.

Supply and fixing of Fabrication outdoor type water proof MCCB enclosur, suitable for fixing of MCCB's upto 250 Amp. Cap to be fitted on Tr -D mast for provision of AT supply for Railway essential services. The size of enclosure should be of 28" X 12" X 8" ( H X W X D ) and made of CRCA 17 sheet steel of thickness of 16 SWG consisting of arrangement for proper incoming and outgoing power supply with 2" dia cable gland , fixture for base fixing arrangement on Tr - D mast , Provision of enclosure earthing and rain protected door & auto locking arrangement along with cleaning , finishing and painting with powder coating in approved shade as instructed by the site supervisor/engineer.

Making of Earthing pit 15' deep with Cooper plate of size 600 mm x 500 m x 3.15 mm with its top to Ground level complete with 20 mm dia GI pipe fitted with alternate Layers of Charcoal and salt at least 150 mm thick around, funnel for waterig and one earthing lead 20 mm x 3mm copper strip in Gl pipe 30 mm medium gauge, masonary/housing with CI hinged cover- plate with locking arrangement complete in all respect (Copper strip up to ground level to be supplied).

Supply and connection of GI strip 50 X 6 / 25 X 6 mm flat for connection to Earth. Size of Strip may be changed as per site requirement

Supply & erection of earthpit as per IS 3043 GI pipe used in size of 50 mm dia x3 mtrs long medium gauge with alternate layer of charcoal and salt as per Sr. DEE(G) drg no MGS/EL/G/Drg/01/08-09 dt 08.08.08 .Make of GI pipe :Tata, Jindal, Bansal

Surface Wiring of main from main distribution board to sub board in heavy gauge PVC 21 conduit Pipe as per IS : 9537 with PVC multistrand copper conductor of size 2 x 2.5 sqmm in voltagegrade 1100 volt as per IS: 694 with ECC of 1/18 SWG copper wire, make of wire : Finolex, Plaza, Polycab, Havells.

Supply of 20 mtr. Long high mast system with its accessories . Mast shaft shall be in 2 section , hot dip galvanised and suitable for wind velocity as per IS : 875 Pt. -3 it shall also include 22 accessories light mast including head frame steel wire rope 6 mm dia suitable drum winch galvanised lantern carriage arrangement suitable for 12 luminaires symmetrically and its control gear boxes . The Mast shall have an integral power tool mounted at the base compartment for its operation. Make -Philips,Bajaj,Aster,BPP

Supply of foundation nut bolts manufactured from special steel along nuts, washer, Anchor plates and templates. Make - BPP, Philips,Bajaj,Aster.

Supply of twin dome aviation obstruction light of type BAJOL 2 with 2 Nos. incandescent lamp -100 W.

Supply of Control Panel Housing suitable control circuit for the mast. It shall also consist of suiatble control for the power tool motor duly ISI appvd. Make - BPP,Philips,Bajaj,Aster.

Design and casting of suitable shallow foundation with M-15 concrete for the high mast considering the soft soil bearing capacity at site as 10 T per sq. mtr. At 2 mtrs. depth with all materials , labours etc.

Erection of High Mast with the suitable equipment and wiring of lumnaires with all wiring material , labour etc.

Installation of control panel on suitable foundation including all material and labour.

Testing and commissioning of above High mast 20 mtrs.High.

Supply, Fixing, Testing and commissioning of power contactor 3 pole type MX mini 25 Amp ML 1.5 type 02 No + 02 NC (coil voltage 240 V / 50 Hz.) as per Cat No. :SS91851 of L&T as per IS 60947-4-1 with enclosure of hylum sheet , Insulator in GI Box of 8" x 6". Make -L&T, Siemens, ABB.

Supply of 250 W / 240 W Watt LED Flood light .Make - Philips, Crompton, Havells,Bajaj ( For High Mast )

"Supply of 90 W / 92 W LED Street light with pressure die- cast Housing with Toughened Glass and individual LEDs with secondary optics and IP -66 Protection . Make - Philips , Bajaj , Havells , Crompton . "

Supply, fixing, connection, testing and commissioning of LED fitting indoor type , Lumen efficiency 100 lumen/watt ,output system wattage 42W (+10%, 5%) with IP 65 or better protection water proof surface/suspendedmounting suitable for operation on 140VA 270V AC supply, LED used in fittings should be of make : NICHIA/OSRAM/ SEOUL/CREE/PHILIPS LIMITEDS/LEDNIUM with warranty period of 5 yrs from date of commissioning or 6 yrs from date of supply whichever is earlier complete with testing arrangement. Make : Bajaj, Philips, Havells.

Providing and fixing of medium grade GI pipe size of 50 mm dia complete with GI fittings including trenching and reffiling etc for cable protection.(Shell thickness 3.6 mm. Minimum wt. 5.03 Kg/mtr. Make:- Jindal, Tata, Bansal.

"Providing and fixing of medium grade GI pipe size of 80 mm dia "" B "" Class complete with GI fittings 8.470 Kg / mtr including trenching and reffiling etc for cable protection. Make: jindal, Tata, Bansal. "

"Supply of octagonal pole (Dip Galvanised in single dep average 70 micron) 6 mtrs. Long Top dia 70 mm , Bottom Dia. 135 mm. Sheet thickness 3 mm. in single section with base plate (220 x 220 x 12 mm L x B x H) with 700 mm Long Double Arm Bracket and 04 Nos. 16 mm dia. x 600 36 mm long (100 mm. thread projectional ), foundation Bolts , complete with smart pack junction Box with 6 A MCB and stud terminals (For mounting inside base plate) and Internal wiring for terminal to fitting with 2 x 2.5 Sq. mm. cable of Reputed make i.e. Polycab , finolex , Havells ,Anchor , Plaza ), The Octagonal Pole shall be hot galvanized in single dip to 86 micron , bearing max. wind speed of 169 Km / hr . Make of pole : Bajaj , Bansal , Jindal , Transrail Lighting Ltd. , Gsamnon Group , Crompton "

"Erection and casting of Foundation for Octagonal Tubular pole with earth excavation with cement , concrete and sand (1 :3 :6) and muffing of Base Foundation as per manufacturers drawing and dimension as required under the suppression of site incharge. "

Fixing, testing and commissioning of LED flood light Street Light fittings with suitable clamps with safe arrangement as per site requirement.

C-Part C"GURARU"Provision of over run line

Supply of XLPE LT Aluminium cable of size 4 core x 16Sq. mm. multistained armoured ISI approved suitable to 1100 volt grade Make: Paragon, Havells,Nicco, Universal.

Supply of XLPE LT Aluminium cable of size 4 core x 35 Sq. mm. multistained armoured ISI approved suitable to 1100 volt grade Make: Paragon, Havells,Nicco, Universal.

Supply of XLPE LT Aluminium cable of size 4 core x 70 Sq. mm. multistained armoured ISI approved suitable to 1100 volt grade Make: Paragon, Havells,Nicco, Universal.

Transportation of above cable from store to site. (supplied by Railway)

Supply of HDPE, Laying and drawing of HT / LT cables manually inside the pipe and proper connection to junction Box as per site requirement in all respect ( Size of cable HT / LT 3 core / 05 4 core from 50 sq mm to 240 sq. mm ), thickness of HDPE should not be less than 06 mm. HDPE will be laid down in the pucca Trench as per site requirement of Pucca Trench as well as HDPE should be Confirming to IS : 14333 1996 or latest , Thickness of Pipe Min. 5.3 mm and max. 5.9 mm ISI Marked, CM / L : 7395589 , Material Grade : PE 100 , Make of Pipe : Asian, Appollo Pipes, Vectus ,UTAKARSH

Supply of HDPE Pipe, Laying and drawing of HT / LT cables through Pressure machanism inside the pipe and proper connection to junction Box as per site requirement in all respect ( Size of cable HT / LT 3 core / 4 core from 50 sq mm to 240 sq. mm ), thickness of HDPE 06 should not be less than 06 mm. HDPE will be laid down in the pucca Trench as per site requirement of pucca trench as well as HDPE should be confirming to IS 14333 1966 or latest.Make of Pipe -Asian, Appollo pipes, Vectus, Utakarsh HDPE pipe , pressure rating at 30 Deg. centigdade : PN 6 , confirmity to IS : 4998 or latest. Thickness of pipe min. 5.3 mm and max. 5.9 mm ISIMarked , CM/L : 7395589, Material Grade : PE 100.

Wall clamping of cable on wall /bridge through suitable clamp of size 50x6 mm of MS flat or catenary of cable through 4 SWG GI wire with suitable clamps (As per site requrement)

supply, Fixing, testing and commissioning of 11 KV indoor type heat shrinkable type 08 cable end sealing box suitable to 3 x50X 70/ 95/ 120 sq.mm duly ISI approved complete in all respect.Make - Raychem, RPEG, Renson.

Supply of LT Heat Shrinkable Straight Through Jointing Kit size 4 core X 35 Sq mm . Make- Denson, RPH, Reychem.

Supply of LT Heat Shrinkable Straight Through Jointing Kit size 4 core X 70 Sq mm . Make- Denson, RPH, Reychem.

fixing, testing and commissioning Of above straight through jointing Kit / Outdoor Kit.

Surface Wiring of main from main distribution board to sub board in heavy gauge PVC 12 conduit Pipe as per IS : 9537 with PVC multistrand copper conductor of size 2 x 2.5 sqmm in voltagegrade 1100 volt as per IS: 694 with ECC of 1/18 SWG copper wire, Make of wire : Finolex, Plaza, Polycab,Havells., R.R. Kabel

"Supply of octagonal pole (Dip Galvanised in single dep average 70 micron) 6 mtrs. Long Top dia 70 mm , Bottom Dia. 135 mm. Sheet thickness 3 mm. in single section with base plate (220 x 220 x 12 mm L x B x H) with 700 mm Long Double Arm Bracket and 04 Nos. 16 mm dia. x 600 13 mm long (100 mm. thread projectional ), foundation Bolts , complete with smart pack junction Box with 6 A MCB and stud terminals (For mounting inside base plate) and Internal wiring for terminal to fitting with 2 x 2.5 Sq. mm. cable of Reputed make i.e. Polycab , finolex , Havells ,Anchor , Plaza ), The Octagonal Pole shall be hot galvanized in single dip to 86 micron , bearing max. wind speed of 169 Km / hr . Make of pole : Bajaj , Bansal , Jindal , BPP , Crompton "

"Erection and casting of Foundation for Octagonal Tubular pole with earth excavation with cement , concrete and sand (1 :3 :6) and muffing of Base Foundation as per manufacturers drawing and dimension as required under the suppression of site incharge. "

Supply of 20 mtr. Long high mast system with its accessories . Mast shaft shall be in 2 section , hot dip galvanised and suitable for wind velocity as per IS : 875 Pt. -3 it shall also include 15 accessories light mast including head frame steel wire rope 6 mm dia suitable drum winch galvanised lantern carriage arrangement suitable for 12 luminaires symmetrically and its control gear boxes . The Mast shall have an integral power tool mounted at the base compartment for its operation. Make -Philips,Bajaj,Aster,BPP

Supply of foundation nut bolts manufactured from special steel along nuts, washer, Anchor plates and templates. Make - BPP, Philips,Bajaj,Aster.

Supply of twin dome aviation obstruction light of type BAJOL 2 with 2 Nos. incandescent lamp -100 W.

Supply of Control Panel Housing suitable control circuit for the mast. It shall also consist of suiatble control for the power tool motor duly ISI appvd. Make - BPP,Philips,Bajaj,Aster.

Design and casting of suitable shallow foundation with M-15 concrete for the high mast considering the soft soil bearing capacity at site as 10 T per sq. mtr. At 2 mtrs. depth with all materials , labours etc.

Erection of High Mast with the suitable equipment and wiring of lumnaires with all wiring material , labour etc.

Installation of control panel on suitable foundation including all material and labour.

Testing and commissioning of above High mast 20 mtrs.High.

Supply, Fixing, Testing and commissioning of power contactor 3 pole type MX mini 25 Amp ML 1.5 type 02 No + 02 NC (coil voltage 240 V / 50 Hz.) as per Cat No. :SS91851 of L&T as per IS 60947-4-1 with enclosure of hylum sheet , Insulator in GI Box of 8" x 6". Make -L&T, Siemens, ABB.

"Supply of 80 W LED Flood light Cat No. : SLE FL 80 IP - 65 . Make - Philips , Bajaj , Havells , Crompton "

Supply of 250 W / 240 W Watt LED Flood light .Make - Philips, Crompton, Havells,Bajaj

Supply, Fixing , testing and commissioning of 4 pole 63 Amp MCCB / 440 V A.C with thermoplastic/ sheet steel enclosure Make Siemens, Havells, Standard.

Supply & erection of earthpit as per IS 3043 GI pipe used in size of 50 mm dia x3 mtrs long medium gauge with alternate layer of charcoal and salt as per Sr. DEE(G) drg no MGS/EL/G/Drg/01/08-09 dt 08.08.08 .Make of GI pipe :Tata, Jindal, Bansal

Supply, fixing,testing and commissioning of Jn. Box made of high quality of thermoplastics , dust and corrosion proof , water tight with cable gland similar to Hansel cat no. D- 9025. Make :- Hensel, siemens, Indoasian

"Supply, Fixing , testing and commissioning of MCCB DB for distribution of 3 phase 29 supply 415 volt AC comprising with following For incoming : 1 ) MCCB 4 pole 100 A - 01 nos, make Siemens cat no. 3VT82161 A A - 040 A A Z OR Equivalent . For Outgoing : 1) MCB SP 06 A to 32 Amp - 08 Nos . (as per site requirement) , 3 ) Beta bus plus vertical Bus Bar DBs with MCCB incoming Cat. No. 8GB31571RC . Make of MCCB : Indoasian ( Optium ) , Siemens , L&T , Havells , ABB"

Supply and fixing of Fabrication outdoor type water proof MCCB enclosur, suitable for fixing of MCCB's upto 250 Amp. Cap to be fitted on Tr -D mast for provision of AT supply for Railway essential services. The size of enclosure should be of 28" X 12" X 8" ( H X W X D ) and made of CRCA 30 sheet steel of thickness of 16 SWG consisting of arrangement for proper incoming and outgoing power supply with 2" dia cable gland , fixture for base fixing arrangement on Tr - D mast , Provision of enclosure earthing and rain protected door & auto locking arrangement along with cleaning , finishing and painting with powder coating in approved shade as instructed by the site supervisor/engineer.