NIT NO: 738/TC/2026-27

OFFICE OF THE EXECUTIVE ENGINEER E/M DIVISION PWD DURG (C.G.)

TERMS & CONDITION

NAME OF WORK :- Construction of Proposed NEW Building for Divisional Joint Director Fund, Accounts and Pension and Divisional Finance and Accouts Training Institute I/c Water Supply & Sanitary fittings, Bore well, Tube well, Boundary wall, C.C. Road & Electrification works at Malviya Nagar, Durg Distt.-Durg (C.G.)

1. Electric installation shall be carried out in accordance with the General Specification for Electrical Works (Part - I Internal) & (Part - II Exlernal) 1972 of C.P.W. D. adopted by E- In-C M.P.W.D. Bhapal & also : Confider With Indian Electrical Rule 1956 as amended. Up to Date.

2. Civil contractor should Sublet the Electrical Work only to those Electrical contractor who are Registered in PWD for Electrical Work as following class.

(I) "D" Class Electrical Contractor - Up to 1.00 Crore

(II) "C" Class Electrical Contractor - Up to 2.00 Crore

(III) "B" Class Electrical Contractor - Up to 10.00 Crore

(IV)"A" Class Electrical Contractor - Unlimited

3. Contractor will submit along with final bill.

(a) Completion Certificate

(b) Completion Plan drawn to a suitable seale on tracing cloth with ink. Indicating Location of main switch , D.B. Circuit fitting and their location

4. The Contractor will be fully responsibility for any accident damages and losses occurred due to negligence of work. The amount of the losses and damages etc. Will be recovered from the Contractor.

5. The Contractor shall have his own tools and plants, helmet, hand gloves, first aid box and other safety measures. In good working condition for staff No. Extra payment shall be made for this arrangement and no Claims shall be paid by the department.

6. The Contractor himself shall be fully responsibility for any accident casualty of the staff if occurs due to Electrical fault or any other reason during the work and no claim will be paid for such accident of causality by the department.

7. The Contractor will be fully responsibility for taking all of safety measures during contract period.

(a) Electrical power supply arrangement temporarily at site will be made by contractor No payment will the made by PWD Department

(b) Earthing system should be installed in presence of A. E. (e/m)/ Sub Engineer (E&M)

8. Earth Continuity conductor of required size & material should be installed with entire run of wiring Earth nut bolt must be provided at all switch boards All metallic parts Ceiling fan tube fitting socket out let should be essentially connected to earth.

9. All Connection of ceilling fan, tube fixture, street light fixture shall be made by Core PVC/ Rubber sheathed cable of required.

10. The Civil contractor should have a Electrical Supervisor for Electrical works at site as per Norms of C.G./ M.P. Govt. who Electrical Diploma/ Degree Holder as Required as per PAC Amount.

NIT For Construction of Proposed NEW Building for Divisional Joint Director Fund, Accounts and Pension and Divisional Finance and Accouts Training Institute I/c Water Supply & Sanitary fittings, Bore well, Tube well, Boundary wall, C.C. Road & Electrification works at Malviya Nagar, Durg Distt.-Durg (C.G.)

PAC Rs. 630.70 Lacs

SERIAL No. Department SOR Year Item Code Description UOM Rate Quantity Amount

1 PWD PWD BLD 2015 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soils. cum 185.000 2666.490 493301.000

2 PWD PWD BLD 2015 1.1.2 In ordinary Rocks cum 267.000 115.110 30734.000

3 PWD PWD BLD 2015 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). sqm 7.200 1024.000 7373.000

4 PWD PWD BLD 2015 1.6.1 Extra for every additional lift of 1.5 m or part thereof. All Types of soil cum 26.500 837.350 22190.000

5 PWD PWD BLD 2015 1.6.2 Ordinary or Hard Rocks cum 47.500 152.790 7258.000

6 PWD PWD BLD 2015 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. Cum 65.000 512.180 33292.000

7 PWD PWD BLD 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. cum 371.000 1766.470 655360.000

8 PWD PWD BLD 2015 1.25.2 Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite treatment:(Five year service guarantee bond to be signed by contractor) Treatment of inside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall below plinth protection at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). Treatment of outer side of plinth masonry wall using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall at the junction of floor at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). metre 19.00 114.000 2166.000

9 PWD PWD BLD 2015 1.25.3 Treatment of outer side of plinth masonry wall using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall at the junction of floor at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). metre 13.50 114.000 1539.000

10 PWD PWD BLD 2015 1.26.1 Carriage by mechanical transport upto 5 km lead: Earth cum 111.00 2003.770 222418.000

11 PWD PWD BLD 2015 2.1.1 Form Work Providing and fixing form work including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. sqm 139.000 1157.680 160918.000

12 PWD PWD BLD 2015 2.1.2 Wall of any thickness including attached pilasters, buttresses etc. in super structure. sqm 228.000 715.560 163148.000

13 PWD PWD BLD 2015 2.1.3 Window sills, anchor blocks, string course, bends, copings, bed plates and like. sqm 184.000 88.140 16218.000

14 PWD PWD BLD 2015 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape sqm 297.000 1626.100 482952.000

15 PWD PWD BLD 2015 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) sqm 235.000 2803.900 658917.000

16 PWD PWD BLD 2015 2.1.8 Beams, lintels, cantilevers & walls sqm 202.000 3470.970 701136.000

17 PWD PWD BLD 2015 2.1.13 Weather shade, chhajja, Cornices and mouldings sqm 294.00 132.090 38834.000

18 PWD PWD BLD 2015 2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings sqm 230.000 87.120 20038.000

19 PWD PWD BLD 2015 3.1.3 Cement Concrete (PCC/ RCC) Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). cum 2970.000 273.300 811701.000

20 PWD PWD BLD 2015 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.(Note :Excess/ less cement used as per design mix is payable/ recoverable separately) 3.2.1) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4163.000 228.900 952911.000

21 PWD PWD BLD 2015 3.3.2 Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work. M-25 Grade cum 4298.000 1599.750 6875726.000

22 PWD PWD BLD 2015 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Ground Ground Floor cum 97.500 273.280 26645.000

23 PWD PWD BLD 2015 3.4 First Floor cum 195.000 251.580 49058.000

24 PWD PWD BLD 2015 3.4 Second Floor cum 292.500 250.290 73210.000

25 PWD PWD BLD 2015 3.4 Third Floor cum 390.000 252.470 98463.000

26 PWD PWD BLD 2015 3.4 Above Plinth cum 487.500 49.430 24097.000

27 PWD PWD BLD 2015 3.12.2 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: Thermo-Mechanically treated bars FE 500D kg 54.500 210926.300 11495483.000

28 PWD PWD BLD 2015 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. cum 4237.000 2.570 10889.000

29 PWD PWD BLD 2015 3.16 Making 50mm thick plinth protection of plain cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with sand including finishing the top smooth. sqm 273.000 71.400 19492.000

30 PWD PWD BLD 2015 4.13.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cement mortar 1:3 (1 cement : 3 coarse sand) cum 3817.000 38.650 147527.000

31 PWD PWD BLD 2015 4.22 Providing Water proofing treatment over Roof, Wall, Chhajjas, Balcony with Diamond Shield and Sealer coat or equivalent at leakage/ seepage area consisting of the operation: (i) Surface preparation roughening of surface, opening of cracks in ‘V’ groove in size of 5mm x 10m (WxD), filling of cracks with putty of Diamond shield with laying fiber glass mesh, Cleaning of surface by scrubbing with steel wire/ Nylon brush. Removing all dust particles and washing with adequate water to clean completely. (ii) Providing and applying 1st coat of diamond shield or equivalent compound (having two component dry powder 80% Chemical 20% (chemical having 30% solid contents) making flexible waterproof and protective modified mortar with minimum thickness 70-80 micron after proper mixing of both the parts of compound along with laying of fiber glass mesh (of weaving size of 10x10 yarn/inch duly coated with alkaline resistant polymer). Allow the coating to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd coat with minimum thickness 100 micron of the same compound. Allow the 2nd coat to set in natural air for minimum 4 Hrs. Total consumption of the diamond shield or equivalent in both coat should be @ 17.90 kg for 10sqm area. (iii) Over the above layers providing and applying 1st coat of sealer compound (Single component High Build elastomeric, flexible, pure acrylic waterproofing membranes having solid content of 65%) minimum 50-60 micron and allow it to set in natural air for minimum 2 Hrs. After 1st coat apply 2nd and final coat 120-140 micron of sealer compound and allow it to set in natural air for minimum 4 Hrs. Consumption of Sealer compound should be @ 5.40 kg per 10 sqm area. The final area appearance of the coating will be milky white (iv) The treated area should be cure with water for 48 hrs by flooding the surface. All above operations to be done in order. The application shall be got done through the authorised applicator of the manufacturer. sqm 421.000 1161.980 489194.000

32 PWD PWD BLD 2015 7.5.4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) cum 3263.000 624.300 2037091.000

33 PWD PWD BLD 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Ground Floor cum 121.000 113.670 13754.000

34 PWD PWD BLD 2015 7.6 First Floor cum 242.000 143.460 34717.000

35 PWD PWD BLD 2015 7.6 Second Floor cum 363.000 117.690 42721.000

36 PWD PWD BLD 2015 7.6 Third Floor cum 484.000 120.470 58307.000

37 PWD PWD BLD 2015 7.6 Terrace Floor- Super Structure cum 605.000 44.680 27031.000

38 PWD PWD BLD 2015 7.11.2 Cement Mortar 1:4 (1 cement : 4coarse sand) Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: Ground Floor sqm 382.000 240.020 91688.000

39 PWD PWD BLD 2015 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: First Floor sqm 22.000 64.720 1424.000

40 PWD PWD BLD 2015 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: Second Floor sqm 33.000 89.530 2954.000

41 PWD PWD BLD 2015 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: Third Floor sqm 44.000 85.770 3774.000

42 PWD PWD BLD 2015 7.20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. sqm 62.500 240.020 15001.000

43 PWD PWD BLD 2015 8.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position. Sal, bijasal, benteak, khair, haldu cum 61051.000 0.120 7326.000

44 PWD PWD BLD 2015 8.3 Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm. each 72.500 18.000 1305.000

45 PWD PWD BLD 2015 8.12.1 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 40 mm. thick (single leaf) sqm 2467.000 39.600 97693.000

46 PWD PWD BLD 2015 8.12.2 35 mm. thick (single leaf) sqm 2005.000 122.820 246254.000

47 PWD PWD BLD 2015 8.12.3 30 mm. thick (single leaf) sqm 1832.000 43.050 78868.000

48 PWD PWD BLD 2015 8.15 Extra for double leaf shutter instead of single leaf. sqm 52.000 25.200 1310.000

49 PWD PWD BLD 2015 8.35 Providing and fixing wall paneling frame made of commercial grade 12mm thick water proof ply strips 100mm wide at 600mm apart center to center vertically and horizontally with necessary screws, wooden plugs etc complete as required. sqm 552.000 450.220 248521.000

50 PWD PWD BLD 2015 8.36.2 Providing and fixing commercial grade water proof ply for wall paneling on wooden frame with necessary nails complete as required. 12mm sqm 827.000 450.220 372332.000

51 PWD PWD BLD 2015 8.37 Providing and fixing approved shade veneering on wood wall paneling complete as required. sqm 705.000 450.220 317405.000

52 PWD PWD BLD 2015 8.39.3 Providing and fixing teak wood moulded beading to doors windows frames including necessary screws and primary coat on exposed surface. 25x25mm metre 122.000 629.510 76800.000

53 PWD PWD BLD 2015 8.58.1 Providing and fixing bright finished brass butt hinges with brass polished MS screws complete: 25x85x5.50 mm (Heavy Type) each 245.00 448.000 109760.000

54 PWD PWD BLD 2015 8.60.1 Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete: 300x16mm each 475.00 93.000 44175.000

55 PWD PWD BLD 2015 8.61.1 Providing and fixing brass door latch with brass polished MS screws complete: 300x16x5 mm each 398.00 69.000 27462.000

57 PWD PWD BLD 2015 8.62.1 Providing and fixing bright finished brass tower bolts (barrel type) with brass polished MS screws complete: 250x10mm each 276.00 110.000 30360.000

58 PWD PWD BLD 2015 8.65.1 Providing and fixing bright finished brass door handles with brass polished MS screws complete: 125 mm each 55.50 224.000 12432.000

59 PWD PWD BLD 2015 8.67 Providing and fixing of bright finished brass mortise latch and lock 100x65mm with six levers and a pair of lever handles with brass polished MS screws etc. complete. each 971.00 2.000 1942.000

60 PWD PWD BLD 2015 8.73 Providing and fixing 150mm bright finished brass floor door stopper with rubber cushion & brass polished MS screws etc complete to suit the shutter thickness. each 73.00 90.000 6570.000

61 PWD PWD BLD 2015 8.158 Providing and fixing IS: 3564 marked aluminium die cast body tubular typeuniversal hydraulic door closer with necessary accessories and screws etc complete. each 1450.00 33.000 47850.000

62 PWD PWD BLD 2015 8.163.A1 Providing and fixing factory made uPVC white colour casement / casement cum fixed glazed windows comprising of uPVC multi-chambered frame and mullion (whereever required) extrued profile duly reinforced with 1.60±0.2 mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile) ,uPVC extrued glazing beads of appropriate dimensions ,stainless steel (SS 304 grade),friction hinges, zinc alloy (white powder coated) casement handles, G.I. fastners 100 x 8 mm size for fixing frame to finishd wall, plastic packers, plastic capsand necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corner, mullion (if required) shall also fusion welded including drilling of holes for fixing hardwere's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction og Engineer-in-Charge. ( Single /double glass panes and silicon sealant shall be paid seperately vide chapter no.9.51,9.58,9.59 Respectively) Casement window double panels with S.S. Friction hinges (300x19x1.9mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness 1.90±0.2 mm and single glazing bead of appropriate dimension ( Area of window upto 0.75 sqm) sqm 7908.15 27.060 213995.000

63 PWD PWD BLD 2015 8.166 D2 Providing & fixing factory made uPVC white sliding glazed window upto 1.50m in heigh dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60+0.2 mm thick glavanized mild steel section made from roll forming process of required length(shape & size according to uPVC proflie),appropriate dimension of UPVC extruded glazing beads and uPVC extrued interlocks ,EPDM gasket. wool pile,zinc alloy rollers(weight bearing capacity to be 40 kg), G.I.fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile offrame & sash shall be mittred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be fill with weather proof silicon sealent over backer rod of required size and of approved quality, all complee as per approved drwaing & direction of Engineer-in-Charge.(Single/double glass panes,wire mesh and silicon sealanr shall be paid sepaarately vide chapter no.9.51,9.58.9.59 Respectively) Note :- For uPVC frame and extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of ( small series ) frame 92x44mm & sash 32 x 60 mm both having wall thickness on 1.9+/-0.2 mm and single glazing bead of appropriate dimension. (Area of window above 1.75 sqm) sqm 7494.70 225.000 1686308.000

64 PWD PWD BLD 2015 8.168 Providing and fixing stainless steel (SS -304 grade) friction hinges to the side/ top hung uPVC windows of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge. 300 x 19 x 1.9mm each 288.25 60.000 17295.000

65 PWD PWD BLD 2015 8.169 Providing and fixing casement handle made of zinc alloyed ( white powder coated) for uPVC casement window with necessary screws etc. complete each 149.95 30.000 4499.000

66 PWD PWD BLD 2015 8.170 Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete each 124.40 252.000 31349.000

67 PWD PWD BLD 2015 8.171 Providing and fixing steel roller for uPVC sliding window with necessary screws etc.complete. each 72.15 340.000 24531.000

68 PWD PWD BLD 2015 8.173 Providing and fixing steel (white powder coated) crescent lock for uPVC sliding window/door with necessary screws etc. complete each 136.05 168.000 22856.000

69 PWD PWD BLD 2015 9.6.2 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of red oxide zinc chromate primer. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. kg 68.000 9681.000 658308.000

70 PWD PWD BLD 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. kg 67.500 7351.500 496226.000

71 PWD PWD BLD 2015 9.25 A Providing and fixing sun glass film over glazed doors windows & ventilators etc. complete Providing and fixing Plain frosted glass film over glazed doors ,windows & partition etc. complete sqm 1008.00 398.550 401738.000

72 PWD PWD BLD 2015 9.27.2 Supplying and fixing rolling shutter of approved makes made of M.S. laths interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and out side locking with push and pull arrangement complete but excluding the cost of top cover and spring. 80x1.20mm M.S. Laths sqm 1570.00 19.000 29830.000

73 PWD PWD BLD 2015 9.28 Providing and fixing 27.5cm long wire spring for rolling shutters. each 362.00 12.000 4344.000

74 PWD PWD BLD 2015 9.29.2 Providing and fixing M.S. sheet top cover for rolling shutter 1.20mm thick sqm 530.00 19.500 10335.000

75 PWD PWD BLD 2015 9.30 Providing and fixing ball bearing for rolling shutters. each 423.00 12.000 5076.000

76 PWD PWD BLD 2015 9.31 Providing and fixing mechanical device chain and crank operation for operating rolling shutters. set 5672.00 2.000 11344.000

77 PWD PWD BLD 2015 9.34 Providing and fixing stainless wire gauge of average width of aperture 1.56mm with wire of 0.35mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete. sqm 791.00 144.450 114260.000

78 PWD PWD BLD 2015 9.36.2 Providing and fixing approved pipe hand rail to walls (ramps, stair cases) including cutting chases and repairing the same to original condition, applying a priming coat of red oxide zinc chromate primer. E.R.W. pipe Kg 79.00 1696.575 134029.000

79 PWD PWD BLD 2015 9.39 Providing and fixing in position G.I. barbed wire (93.8gram/m) to concrete/wooden/ angle iron posts (straight or diagonal) including securing and screwing with G.I. tying wire, G.I. stapples, G.I.U-nails or steel pins etc., complete(Cost of posts, struts to be paid for separately) metre 9.40 1480.000 13912.000

80 PWD PWD BLD 2015 9.40 Providing and fixing concertina coil fencing with required dia 610 mm (having 50 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-incharge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). metre 164.00 150.000 24600.000

81 PWD PWD BLD 2015 9.45 Providing and placing in position angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for required length and drilling holes upto 10 mm dia as per requirement including priming coat with red oxide zinc chromate primer and placing the post/ strut in cement concrete block. Kg 69.50 617.400 42909.000

82 PWD PWD BLD 2015 9.47.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion kg 331.00 3003.540 994172.000

83 PWD PWD BLD 2015 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). Kg 338.00 2268.510 766756.000

84 PWD PWD BLD 2015 9.48 Extra for powder coated (minimum 50 micron) aluminium sections instead of anodized. Kg 27.00 5272.050 142345.000

85 PWD PWD BLD 2015 9.51.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4 mm thickness Sqm 611.00 677.310 413836.000

86 PWD PWD BLD 2015 9.57.2 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. SS Grade 304 kg 525.000 574.938 301842.000

87 PWD PWD BLD 2015 9.59.3 Extra for providing and fixing reflective glass panes in aluminium door, window, ventilator shutters and partitions instead of float glass. 6 mm thickness Sqm 353.00 31.200 11014.000

88 PWD PWD BLD 2015 9.60 Designing, providing and fixing aluminium frame work made of special aluminium section on building face with M.S. angle iron brackets fixed on RCC structure with S.S. hold fasteners, including providing and fixing two sided structural adhesive tape of appropriate grade (NORTON or equivalent), on aluminium sections for fixing aluminium/ glass panel, sealing on periphery of frame work, by providing EPDM gasket, silicon weather sealant between aluminium frame and building structure including hire charges of double scaffolding complete. kg 357.000 265.200 94676.000

89 PWD PWD BLD 2015 9.63.3 Providing and fixing clear float toughened glass door or partition in required thickness frameless in appropriated size inclusive of edge molding polish and making required size slot or hole for patch fitting/hardware etc. The glass to be assembled together with patch fitting and hardware in proper alignment with all labour tools and tackles etc. complete. (Patch fittings and hardware to be paid for separately) 6mm thick for glazing etc. sqm 1765.00 31.200 55068.000

90 PWD PWD BLD 2015 10.11 Supply and fixing of precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm 636.00 63.340 40284.000

91 PWD PWD BLD 2015 10.41 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : metre 68.00 680.950 46305.000

92 PWD PWD BLD 2015 10.42 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx650 micron thick (0.65mm), finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete. each 205.00 6.000 1230.000

93 PWD PWD BLD 2015 10.54 Extra for sunk or raised mouldings in the Gypsum board/ plaster of paris false ceiling. sqm 185.000 1316.800 243608.000

94 PWD PWD BLD 2015 10.61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. sqm 658.000 1316.800 866454.000

95 PWD PWD BLD 2015 11.1.2 Plastering and Pointing Work Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:4 (1 cement : 4 fine sand) sqm 87.000 3433.180 298687.000

96 PWD PWD BLD 2015 11.2.4 Providing and making 12mm thick cement plaster of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 91.500 3127.370 286154.000

97 PWD PWD BLD 2015 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 107.000 4239.190 453593.000

98 PWD PWD BLD 2015 11.5 Neat Cement punning. sqm 33.000 482.520 15923.000

99 PWD PWD BLD 2015 11.7 Providing and making 18 mm thick cement plaster with under layer of 12mm thick cement plaster 1:5 (1 cement : 5 fine sand) finished with a top layer of 6mm thick cement plaster 1:3 (1 cement : 3 fine sand). sqm 163.000 2360.520 384765.000

100 PWD PWD BLD 2015 11.11 Extra for plastering of exterior walls when height exceeds 10m above ground level for every additional height of 3.0m or part thereof. sqm 22.500 783.040 17618.000

101 PWD PWD BLD 2015 11.30.1 Moulding cornices and cover. Straight cornices in their length sqm 69.000 12.330 851.000

102 PWD PWD BLD 2015 11.30.2 Curved cornices in their length sqm 91.500 12.330 1128.000

103 PWD PWD BLD 2015 11.32.4 Providing and making 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width: Drip course metre 3.60 575.600 2072.000

104 PWD PWD BLD 2015 11.40 Making grove in cement plaster while plastering upto10 mm deep and 10 mm wide. metre 1.30 592.560 770.000

105 PWD PWD BLD 2015 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height. sqm 86.000 1991.880 171302.000

106 PWD PWD BLD 2015 12.3.2 Flooring Work Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 50 mm thick sqm 254.000 599.320 152227.000

107 PWD PWD Road 2015 12.37.3 Chequered precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tile including cleaning of joint etc complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Dark shade using ordinary sqm 518.000 154.700 80135.000

108 PWD PWD BLD 2015 12.44 Extra for nosing in Granite stone for treads. metre 126.000 144.000 18144.000

109 PWD PWD BLD 2015 12.46.1 15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m). Granite stone grey/Pink sqm 1869.000 122.160 228317.000

110 PWD PWD BLD 2015 12.46.2 Granite stone Black sqm 2719.000 21.600 58730.000

111 PWD PWD BLD 2015 12.74.1 Providing and fixing rectified glazed ceramic floor tiles of 1st quality conforming to IS:15622-2017 of approved make, in all colours, shades overs 20mm thick bed of cement Mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with matching pigment complete. Size 300x300mm thickness 7 to 8 mm sqm 779.00 346.720 270095.000

112 PWD PWD BLD 2015 12.75.1 Providing and fixing rectified glazed ceramicWall/Dado tiles of 1st quality conforming to IS:15622-2017 of approved make, in all colours, shades overs 12mm thick bed of cement Mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with matching pigment complete. Size 300x450mm thickness 7 to 8 mm sqm 710.00 780.740 554325.000

113 PWD PWD BLD 2015 12.75.3 Size 400x 800mm thickness 7 to 9 mm sqm 897.00 43.200 38750.000

114 PWD PWD BLD 2015 12.79.2 Providing and laying DOUBLE/MULTI CHARGE (minimum 2.0mm thick layer) VITRIFIED floor tiles with water absortion less than 0.05% and conforming to IS:15622-2017 of 1st quality of approved make in all colours, shades and size mentioned below (+/- 10mm) laid on 20mm thick cement mortal 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 800x800mm thickness 9 to 10 mm sqm 1343.000 2294.030 3080882.000

115 PWD PWD BLD 2015 13.4.2 15mm thick Granite work (machine cut, table rubbed & mirror polished) for wall lining (veneer work) in cement mortar 1:3 (1 cement : 3 coarse sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) mixed with matching pigment. (Area of slab should be over 0.5 sqm). Granite stone black sqm 2771.000 59.040 163600.000

116 PWD PWD BLD 2015 13.6.2 15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. Granite stone black sqm 3279.000 256.485 841014.000

117 PWD PWD BLD 2015 13.17.2 Providing and fixing 15mm thick Granite (machine cut, table rubbed & mirror polished on both sides) for partition curtain in toilets or similar locations of required size in wall with cement mortar 1:4 (1 cement : 4 coarse sand) including cutting chase in wall and joint with wall treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. Granite stone black sqm 2924.000 7.080 20702.000

118 PWD PWD BLD 2015 13.19.2 Extra for providing edge moulding to 15mm thick stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work metre 172.000 1452.600 249847.000

119 PWD PWD BLD 2015 13.20 Extra for fixing marble /granite stone in facia and drops of width upto 150 mm with epoxy resin based adhesive instead of cement mortar including cleaning etc. complete. metre 257.000 52.500 13493.000

120 PWD PWD BLD 2015 13.21 Extra for making opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including making necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. each 253.000 80.000 20240.000

121 PWD PWD BLD 2015 13.24.1 Providing and fixing one side polished 25 mm thick RAJIM SAND STONE shelves fixed in walls in cement mortar 1:3 (1 cement : 3 coarse sand) including finishing complete. One side polished sqm 331.000 34.140 11300.000

122 PWD PWD BLD 2015 14.56 Providing and applying 2mm thick white cement based polymeric Exterior grade Putty with minimum 3 coats applied @ 5.4 kg/ 10Sqm as per relevant IS code 17545:2021 (Product such as Birla wall care, Asian trucare,JK wall putty, Berger Bison wall putty) to make the surface smooth and even with all tools tackles and labour etc. complete for the work. sqm 86.000 9365.350 805420.000

123 PWD PWD BLD 2015 14.60 Providing and applying of Acrylic primer on all surface applied @ 0.80 litrs/10 sqm as per relevant I.S. code 15489:1974 ( Product such as Asian Spark/suprimo , J.K. Primer, Dulux Acrylic Primer) with all tools tackles and labour etc. complete for the work. sqm 37.000 11574.350 428251.000

124 PWD PWD BLD 2015 14.64 Providing and applying Premium plastic emulsion paint with roller application minimum three coats applied @ 0.75 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -1 Class D & C ( Glossy and Semi Glossy Finish) of required shade (Product such as Asian Apcolite Premium , Dulux Super Cover, Berger Easy Clean ,Nippon Breezee Metex Gold, Opus I-50 / Calista) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.(with 3 year Warranty) sqm 84.000 8858.450 744110.000

125 PWD PWD BLD 2015 14.68 Providing and applying on exterior surface with PREMIUM Exterior emulsion paint of required shade to give protective and water proof finish minimum 3 coats applied @ 1.40 lit / 10Sqm up to final finish as per relevant I.S. Code 15489:2013 Type -2 Class D , C (Glossy /Semi Glossy finish ) (Product such as Asian Apex ,Dulux Weather Shield Prima E900 , Berger Weathercoat Antidust , Nerolac Everlas Excel , Nippon Sumo Etra, Opus True flex) inclusive of providing abro tape on edges and articleand cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work.(With 3Year Warranty.) sqm 84.000 3661.650 307579.000

126 PWD PWD BLD 2015 14.72 Providing and applying Glossy finish Enamel paint mimimum 2 coats in all surface applying @ 0.75 lit/ 10 Sqm up to required finish as per relevent I.S. code 2932: 2013 of (Product such as Asian Apcolite Premium Enamel , Dulux Promise Premium Enamel , Nerolac Synthatic Enamel, Opus Prime enamel ) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. sqm 120.000 922.800 110736.000

127 PWD PWD BLD 2015 14.80 Providing and applying Polishing in high gloss/matt finish MELAMINE CLEAR POLISH on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1.The surface to be polished is rubbed with sand paper 80/120 no. & then with sand paper of 160/180 nos.2.Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3.On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing,then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4.On this, 1st coat of melamine polish is applied with spray gun using melamine clear polishand melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs.The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. Final coat to be done in 2 layers without gap of time. inclusive of providing abro tape on edges and article and cleaning of adjucent surface with all tools, tackles and labour etc. complete for the work. sqm 799.000 808.000 645592.000

128 PWD PWD BLD 2015 18.4.3 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White wall hung type each 4415.000 25.000 110375.000

129 PWD PWD BLD 2015 18.10.2 Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with PTMT nuts and PVC bush of approved quality and colour: 45 CM length each 66.500 49.000 3259.000

130 PWD PWD BLD 2015 18.13.1 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: Flat back half stall urinal of size 460x380x250mm each 1776.000 12.000 21312.000

131 PWD PWD BLD 2015 18.17.5 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Oval or round size 550x400mm. each 1605.000 37.000 59385.000

132 PWD PWD BLD 2015 18.21.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 1040x510 mm bowl size 460x410x200mm each 8539.000 3.000 25617.000

133 PWD PWD BLD 2015 18.25.2 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia each 88.500 49.000 4337.000

134 PWD PWD BLD 2015 18.26.2 Providing and fixing PVC waste coupling in wash basin/ sink. 40 mm each 61.000 49.000 2989.000

135 PWD PWD BLD 2015 18.30.1 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 5mm Thick Mirror Sqm 2016.000 18.000 36288.000

136 PWD PWD BLD 2015 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. metre 182.000 232.400 42297.000

139 PWD PWD BLD 2015 18.77.1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm each 113.000 48.000 5424.000

142 PWD PWD BLD 2015 18.77.2.1 Double "Y" with or without door 75mm each 129.000 146.000 18834.000

144 PWD PWD BLD 2015 18.77.3.1 Vent covel 75mm each 34.000 24.000 816.000

145 PWD PWD BLD 2015 18.77.3.2 Vent covel 110mm each 44.000 24.000 1056.000

146 PWD PWD BLD 2015 18.77.4.1 Access Door Cap 75mm each 49.500 24.000 1188.000

148 PWD PWD BLD 2015 18.77.5 P trap 110mmx110mm long each 227.000 24.000 5448.000

149 PWD PWD BLD 2015 18.77.6 Nahani trap 110x75mm each 90.500 29.000 2625.000

150 PWD PWD BLD 2015 18.78.1 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm each 57.000 128.000 7296.000

152 PWD PWD BLD 2015 19.5.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., 15 mm nominal outer dia .Pipes. metre 133.000 87.500 11638.000

153 PWD PWD BLD 2015 19.5.2 20 mm nominal outer dia .Pipes. metre 167.000 137.500 22963.000

154 PWD PWD BLD 2015 19.5.3 25 mm nominal outer dia .Pipes. metre 213.000 187.500 39938.000

155 PWD PWD BLD 2015 19.6.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. EXTERNAL WORK 32 mm nominal outer dia pipes metre 228.000 208.750 47595.000

156 PWD PWD BLD 2015 19.6.5 40 mm nominal outer dia pipes metre 300.000 50.000 15000.000

157 PWD PWD BLD 2015 19.6.6 50 mm nominal outer dia pipes metre 476.000 137.500 65450.000

158 PWD PWD BLD 2015 19.9.1 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete: 15 mm Dia nominal bore metre 131.000 20.000 2620.000

159 PWD PWD BLD 2015 19.9.2 20 mm Dia nominal bore metre 159.000 35.000 5565.000

160 PWD PWD BLD 2015 19.9.4 32 mm Dia nominal bore metre 272.000 50.000 13600.000

161 PWD PWD BLD 2015 19.9.6 50 mm Dia nominal bore metre 398.000 150.000 59700.000

162 PWD PWD BLD 2015 19.9.8 80 mm Dia nominal bore metre 639.000 100.000 63900.000

163 PWD PWD BLD 2015 19.10.2 Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured) 32 mm Dia nominal bore each 224.000 4.000 896.000

164 PWD PWD BLD 2015 19.10.4 50 mm Dia nominal bore each 347.000 4.000 1388.000

165 PWD PWD BLD 2015 19.10.6 80 mm Dia nominal bore each 632.000 2.000 1264.000

166 PWD PWD BLD 2015 19.11.4 Providing and fixing G.I. Union in G.I. pipe (New work) including cutting and threading the pipe and making long screws etc. complete: 32 mm nominal each 148.000 4.000 592.000

167 PWD PWD BLD 2015 19.11.5 40 mm nominal each 169.000 2.000 338.000

168 PWD PWD BLD 2015 19.11.6 50 mm nominal bore each 250.000 2.000 500.000

169 PWD PWD BLD 2015 19.13.2 Providing and fixing 15 mm nominal bore Brass bib/stop cock of approved quality: Bib cock (350 grams) each 237.00 4.000 948.000

170 PWD PWD BLD 2015 19.13.3 Stop cock (350 grams) each 237.00 4.000 948.000

171 PWD PWD BLD 2015 19.14.2 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Long nose bib cock (500 grams) each 455.000 25.000 11375.000

172 PWD PWD BLD 2015 19.14.3 Long body bib cock (500 grams) each 426.000 25.000 10650.000

173 PWD PWD BLD 2015 19.14.4 Piller Cock (400 grams) each 398.00 37.000 14726.000

174 PWD PWD BLD 2015 19.14.5 Two way bib cock (800 grams) each 708.00 25.000 17700.000

175 PWD PWD BLD 2015 19.14.7 Angle valve for basin mixer and geyser points (450 grams) each 382.000 49.000 18718.000

176 PWD PWD BLD 2015 19.14.8 Basin mixer pillar tap with spout (1000 grams) each 1248.000 3.000 3744.000

177 PWD PWD BLD 2015 19.14.12 Bottle trap set with extension pipes each 473.000 49.000 23177.000

178 PWD PWD BLD 2015 19.14.14 Soap dish plate each 163.000 37.000 6031.000

179 PWD PWD BLD 2015 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) Set 774.000 1.000 774.000

180 PWD PWD BLD 2015 19.14.15 Shower rose (revolving type) (150mm) each 269.000 9.000 2421.000

181 PWD PWD BLD 2015 19.14.17 Towel ring (150 mm dia) each 254.000 18.000 4572.000

182 PWD PWD BLD 2015 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) Set 774.000 24.000 18576.000

183 PWD PWD BLD 2015 19.15 Providing and fixing stainless steel drain jali of approved make/quality. each 51.000 78.000 3978.000

184 PWD PWD BLD 2015 19.16.2 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 32 mm nominal bore each 510.000 4.000 2040.000

185 PWD PWD BLD 2015 19.16.3 40 mm nominal bore each 596.000 4.000 2384.000

186 PWD PWD BLD 2015 19.16.4 50 mm nominal bore each 762.00 2.000 1524.000

187 PWD PWD BLD 2015 19.17.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore each 394.000 8.000 3152.000

188 PWD PWD BLD 2015 19.19.2 Providing and fixing gun metal non- return valve (vertical type) of approved quality (screwed end) : 32 mm nominal bore each 608.000 3.000 1824.000

189 PWD PWD BLD 2015 19.19.4 50 mm Dia nominal bore each 1088.000 2.000 2176.000

190 PWD PWD BLD 2015 19.19.6 80 mm Dia nominal bore each 2758.000 2.000 5516.000

191 PWD PWD BLD 2015 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank litre 7.300 22000.000 160600.000

192 PWD PWD BLD 2015 19.43 Cutting holes upto 30x30 cm in walls including making good the same : each 125.000 124.000 15500.000

193 PWD PWD BLD 2015 19.44 Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. each 94.000 120.000 11280.000

194 PWD PWD BLD 2015 20.3.3 Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks crushing strength not less than 35kg/cm2, water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 180x150 mm size P type each 1504.000 6.000 9024.000

195 PWD PWD BLD 2015 20.6.2 Providing, lowering, laying, aligning, fixing in position at and jointing at all level/ depths ISI marked HDPE pipes of PE-100 grade and PN 6 for sewer application as per IS 14333-1996 (amended upto date) in trenches in complete including all material, labour, testing and commissioning as per direction of Engineer. Note : E/w to be measured and paid separately. 150mm Dia metre 771.000 120.000 92520.000

197 PWD PWD BLD 2015 20.7.4 Constructing brick masonry manhole with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation in cement concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including RCC cover with frame 450x600 mm internal dimensions. each 5595.000 16.000 89520.000

198 PWD PWD BLD 2015 20.7.5 Inside size 120x90 cm and 90 cm deep including RCC cover with frame 500 mm internal diameter. each 9182.000 4.000 36728.000

199 PWD PWD BLD 2015 20.8.1 Extra for depth for manholes Size 90x80 cm metre 3755.000 11.800 44309.000

201 PWD PWD BLD 2015 20.11.1 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design: With 20x20 mm square bar each 168.000 40.000 6720.000

202 PWD PWD BLD 2015 20.15.1 Providing and fixing in position precast R.C.C. manhole cover and frame L D- 2.5 of required shape and approved quality Rectangular shape 600x450mm internal dimensions each 1031.000 2.000 2062.000

203 PWD PWD BLD 2015 20.16.1 Providing and fixing in position precast R.C.C. manhole cover and frame M D- 10 of required shape and approved quality Square shape 450mm internal dimension each 967.000 2.000 1934.000

204 PWD PWD BLD 2015 20.25 Providing and constructing brick masonry road gully chamber 50x45x60 cm with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame complete as per standard design. each 2872.000 10.000 28720.000

205 PWD PWD BLD 2015 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. each 1709.000 2.000 3418.000

206 PWD PWD BLD 2015 21.1.1.3 RAIN WATER HARVESTING & TUBEWELLS Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level. All types of soil 150 mm dia. metre 339.000 50.000 16950.000

208 PWD PWD BLD 2015 21.1.2.3 Rocky strata including Boulders. 150 mm dia. metre 396.000 130.000 51480.000

210 PWD PWD BLD 2015 21.2.2.3 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level. Rocky strata including Boulders. 150 mm dia. metre 424.000 130.000 55120.000

211 PWD PWD BLD 2015 21.5.3 Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge. 150 mm nominal dia metre 1304.000 56.000 73024.000

212 PWD PWD BLD 2015 21.6.3 Supplying, assembling, lowering and fixing in vertical position in bore well, slotted casing pipe made from ISI marked G.I. pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (having slot of size 1.6/3.2 mm), of reputed and approved make, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal dia metre 1317.000 56.000 73752.000

213 PWD PWD BLD 2015 21.11.3 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 150 mm dia each 217.000 4.000 868.000

214 PWD PWD BLD 2015 21.12.3 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp. each 1055.000 4.000 4220.000

215 PWD PWD BLD 2015 21.14.1 Supplying, filling, spreading & leveling stone boulders/ Gravels/ Coarse sand, in recharge pit, in the required layers and thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (excavation of pit will be paid separately). Stone boulders of size range 5 cm to 20 cm, in recharge pit cum 863.000 18.840 16259.000

216 PWD PWD BLD 2015 21.14.2 Gravels of size range 5 mm to 10 mm, over the existing layer of boulders cum 806.000 18.840 15185.000

217 PWD PWD BLD 2015 21.14.3 Coarse sand of size range 1.5 mm to 2 mm over existing layer of gravel cum 471.000 18.840 8874.000

218 PWD PWD BLD 2015 21.17 Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable) point 1502.000 4.000 6008.000

219 PWD PWD BLD 2015 21.18 Providing and fixing filter of minimum 100 litre capacity for roof top rain water harvesting through tube well consisting of two layered HDPE tank with five layers (each layers of minimum 100 mm) consist of coarse sand, 4mm, 6mm, 8mm & 12 mm gravels with stainless steel wire mesh fixed between each layer with suitable length and sufficient numbers of 110 mm dia PVC pipe pieces in the bottom of tank to support the above layer including fixing of inlet and out let P.V.C. pipe of required diameter upto 2 metre length on each side, Cement Concrete plateform of required size complete as directed by Engineer in charge. (excluding cost of tubewell and inlet and outlet pipe beyond 2 metre) litre 18.50 1000.000 18500.000

220 PWD PWD BLD 2015 22.2 Supplying and stacking of good earth at site including royalty, loading, unloading and carriage upto 10 km (earth measured in stacks will be reduced by 20% for payment). cum 201.000 43.200 8683.000

221 PWD PWD BLD 2015 22.3 Supplying and stacking sludge at site including royalty, loading, unloading and carriage upto 5 km (sludge measured in stacks will be reduced by 8% for payment). cum 248.000 14.580 3616.000

222 PWD PWD BLD 2015 22.5 Rough dressing the trenched ground including breaking clods. sqm 0.500 90.000 45.000

223 PWD PWD BLD 2015 22.6 Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. sqm 1.600 90.000 144.000

224 PWD PWD BLD 2015 22.7 Fine dressing the ground sqm 1.100 90.000 99.000

225 PWD PWD BLD 2015 22.8 Spreading of sludge, dump manure or/and good earth in required thickness (Cost of sludge, dump manure or/ and good earth to be paid separately). cum 17.500 57.780 1011.000

226 PWD PWD BLD 2015 22.9 Mixing earth and sludge or manure in proportion specified or directed. cum 11.000 57.780 636.000

227 PWD PWD BLD 2015 22.10.3 Grassing with ‘Doob’ grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed (the good earth shall be paid for separately). In rows 5 cm apart in either direction. sqm 6.600 90.000 594.000

228 PWD PWD BLD 2015 22.19 Edging with modular well burnt clay bricks of crushing strength not less than 25kg/ sqcm laid dry length wise including excavation, refilling, consolidating with hand packing and spreading neatly surplus earth within a lead of 50 m : metre 28.500 80.100 2283.000

229 PWD PWD BLD 2015 22.25.1 Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand: Hedges like Alife, Dorenta, Tikoma etc each 14.000 350.000 4900.000

230 PWD PWD BLD 2015 22.25.2 Furn like Arica, China etc (3 year old) each 125.000 180.000 22500.000

231 PWD PWD BLD 2015 22.25.3 Hibiscus (Flower)/ Rose each 26.500 250.000 6625.000

232 PWD PWD BLD 2015 22.25.4 Carpet grass each 263.000 210.000 55230.000

233 PWD PWD BLD 2015 23.1.2 Supply, erection, jointing, testing & commissioning of "C" Class MS pipes (as per IS: 1239) including necessary specials such as tees, bends, flanges reducers etc., complete on wall / ceiling. The pipes to be erected on wall or suspended from beams, RCC roof slabs with suitable size MS bars / angle irons including painting of metal part except pipe line. 65mm Dia metre 561.000 200.000 112200.000

236 PWD PWD BLD 2015 23.2.2 Painting for M.S. pipe with a coat of red oxide primer and two or more coats of synthetic enamel paint of approved colour and Quality to give an even shade including surface preparation. 65mm Dia metre 18.500 200.000 3700.000

239 PWD PWD BLD 2015 23.3.2 Providing and wrapping 4 mm thick of approved make and quality bitumen based anti rust felt over MS pipe with overlap of 25 mm to make an impermeable layer including painting with one coat of bitumastic paint before felt complete. (Only on MS pipe to be laid in soil below ground). 100 mm Dia metre 107.000 25.000 2675.000

241 PWD PWD BLD 2015 23.4.3 Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. 150 mm Dia each 8384.000 4.000 33536.000

242 PWD PWD BLD 2015 23.5.2 Supplying, fixing, testing and commissioning of flanged butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS: 13095 of following sizes as required. 100 mm Dia each 3461.000 2.000 6922.000

244 PWD PWD BLD 2015 23.6.1 Providing and fixing C.I. double flanged sluice valves rated to PN 1.6 with C.I. Wheel bolts, nuts, washers 3mm thick insertion rubber gasket including matching flanges table E, complete. 100 mm Dia each 3453.000 2.000 6906.000

246 PWD PWD BLD 2015 23.7.1 Providing and fixing brass GM/ ball valve (full bore type) with plastic coated lever and screwed female ends tested to 20 Kg/ cm2 of approved quality as specified. 25mm Dia each 436.000 2.000 872.000

248 PWD PWD BLD 2015 23.8 Providing, fixing, testing and commissioning 50mm dia drain system in wet riser line with 50mm dia GM valve, necessary MS "C" class pipe line (upto 1 metre) and accessories complete as required. each 977.000 2.000 1954.000

249 PWD PWD BLD 2015 23.9 Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia and with necessary G.I. coupling, valve to be fitted on top of Air vessel or on wet riser as per specification. each 1126.000 2.000 2252.000

250 PWD PWD BLD 2015 23.10 Providing and fixing Flow switches suitable for fixing in 50mm to 150mm dia pipe line, complete with all accessories to provide indication in annunciator panel. each 3603.000 2.000 7206.000

251 PWD PWD BLD 2015 23.11 Providing and fixing pressure switch with suitable for 1-10 Kg/cm2 including 12/15 mm Ø isolation valve, G.I. nipple, elbow, electrical connections setting of Cut-In and cut-Off pressure complete in all respects and in an approved manner. each 1253.000 2.000 2506.000

252 PWD PWD BLD 2015 23.12 Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0-21 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc. as per requirement in approved manner. each 750.000 2.000 1500.000

253 PWD PWD BLD 2015 23.13 Providing and fixing 15 mm dia, Quartzoid bulb type G.M. Sprinkler Head set to operate at 680C of approved make chrome plated complete in all respect as required. each 1005.000 240.000 241200.000

254 PWD PWD BLD 2015 23.14 Supplying and fixing swinging type First-Aid Hose Reel drum with MS construction spray painted in Post office Red colour, conforming to IS: 884 with upto date amendments, complete with brackets for fixing on wall, connections from riser with 25 mm dia MS/GI pipe and GM gate valve but excluding hose reel. each 4410.000 5.000 22050.000

255 PWD PWD BLD 2015 23.15 Supplying and fixing 19mm dia 22.5 metre long high pressure polypropylene First-Aid Hose Reel. each 1462.000 5.000 7310.000

256 PWD PWD BLD 2015 23.18 Supplying and fixing single headed internal hydrant valve with instantaneous Gun metal couplings of 63 mm dia with cast iron wheel ISI marked conforming to IS: 5290 (Type - A) with blank Gunmetal cap and chain as required. each 6719.000 5.000 33595.000

257 PWD PWD BLD 2015 23.20 Supplying and erecting orifice plate having 6 mm thickness, 140 mm outer dia at every single outlet hydrant valve as per specification. each 409.000 5.000 2045.000

258 PWD PWD BLD 2015 23.22 Supplying and fixing 63 mm dia, 15 mtr long RRL hose pipe with 63 mm dia Male and Female Stainless Steel-IS: 3444 Grade-1 couplings duly binded with GI wire, rivets etc. conforming to IS: 636 (Type -A) as required. each 3527.000 5.000 17635.000

259 PWD PWD BLD 2015 23.24 Supplying & fixing 63 mm dia Stainless Steel IS: 3444 Grade-1 branch pipe with 20 mm dia (nominal internal) Gun Metal nozzle conforming to IS: 903, suitable for instantaneous coupling connection to connect hose pipe coupling as required. each 2983.000 5.000 14915.000

260 PWD PWD BLD 2015 23.25.2 Supplying and fixing of MS hose cabinet box of made of 2 mm thick MS sheet and 40 x 40 x 5mm angle iron with front openable cover having 6 mm thick glazed glass viewing window i/c necessary locking arrangement, on existing wall/ brick platform etc complete as required. Size 900 mm x 600 mm x 500 mm each 8962.000 5.000 44810.000

261 PWD PWD BLD 2015 23.26 Providing and fixing fire brigade 63mm dia GM suction coupling to 100/150 mm dia suction pipe complete. each 2908.000 5.000 14540.000

262 PWD PWD BLD 2015 23.31 Supplying and fixing 4 way Fire Brigade Connection of cast iron body with 4 Nos. Gun metal male instantaneous inlet couplings complete with cap and chain conforming to IS: 904 including connection to existing MS pipe line complete as required. each 12434.000 2.000 24868.000

263 PWD PWD BLD 2015 23.33 Providing and fixing standard fireman's axe (tested for 20000 Volts) with heavy insulated rubber handle. (ISI marked) each 2435.000 5.000 12175.000

264 PWD PWD BLD 2015 23.34 Providing and constructing masonry chamber 90x90 x100 cms inside with 3.5 class designation fly ash brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter/ sluice valve/ etc, M.S. cover of size 600mm x 600mm with M.S. frame and 6mm thick sheet with locking arrangement etc complete. each 7825.000 2.000 15650.000

265 PWD PWD BLD 2015 23.35 Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels etc.) including cutting to size, drilling welding including cost of steel fasteners, clamp in RCC structural members as directed, including two coat of enamel painting over one coat of red oxide primer complete. Kg 66.000 400.000 26400.000

266 PWD PWD ROAD 2015 3.2 Excavation in Soil (by Mechanical Means.) Excavation for roadway in soil using mechanical means including loading in tipper for carrying of cut earth to embankment site and unloading with all lifts and lead upto 1000 meters as per relevant clauses of section 300. cum 95.00 590.010 56051.000

267 PWD PWD ROAD 2015 3.12 Construction of embankment with Material Obtained from Borrow Pits/Borrow Area (Construction of embankment with approved material/selected soil having C.B.R.>5 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) cum 223.00 163.88 36545.000

268 PWD PWD ROAD 2015 3.13 Construction of sub-grade with Material Obtained from Borrow Pits/Borrow Area (Construction of sub-grade with approved material/selected soil having C.B.R.>8 (unless specified otherwise in the contract) obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) cum 250.00 161.3 40325.000

269 PWD PWD ROAD 2015 3.25(ii) Construction of RCC drain/chamber cover, placing in position, providing shuttering and concreting by using concrete mixer, compaction by vibration etc complete as per drawings and technical specifications excluding reinforcement. with RCC M-20 cum 4146.00 76.970 319118.000

270 PWD PWD ROAD 2015 3.25(iii) Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in drain/cover/chamber complete as per Drawing and Technical Specifications. MT 56301.00 5.390 303462.000

271 PWD PWD ROAD 2015 4.1 A (b)(i) Granular Sub-base as per Table:- 400-1 Construction of granular sub-base by providing graded Material, ,carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory power roller at OMC to achieve the desired density, complete as per clause 401 Plant mix method (with Mechanically crushed stone only) For Sub-base cum drainage layer or upper sub-base with Grading-V Material cum 1372.00 80.650 110652.000

272 PWD PWD ROAD 2015 4.13 B Construction of Shoulders (Construction of shoulders as per clause 408 with selected soil from borrow pits / borrow areas having CBR not less than 12 and shall have L.L. and P.I. not more than 25% and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing required cross fall, compacting. watering rolling and royalty charges etc. complete. With smooth wheeled roller cum 277.00 26.100 7230.000

273 PWD PWD ROAD 2015 4.15 (C) Providing & laying precast interlocking concrete blocks of minimum compressive strength of 300 kg/sq.cm and approved size , shape/ pattern over coarse sand bed of thickness upto 40 mm and joints thick filled with fine sand including leveling with surface vibrator, temping and sweeping etc. complete as per IRC-SP-63-2004. 80mm thick Polymer coated coloured precast interlock concrete blocks sqm 732.00 416.160 304629.000

274 PWD PWD ROAD 2015 4.18 Providing and fixing kerb stones 100 mm thick and 600 mm wide chisel dressed cut stones fixed in CC 1:3:6 (block size 250 x 225 mm) including all excavation. each 431.00 195.000 84045.000

275 pwd PWD ROAD 2015 6.1 Dry Lean Cement Concrete Sub-base as per IRC:SP-49 (Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 26.5 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing as per clause 601.) cum 2332.00 53.770 125392.000

276 pwd PWD ROAD 2015 6.6 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads) P.C.C. M-10 cum 2789.00 58.850 164133.000

277 PWD PWD ROAD 2015 6.7 Providing and laying un-reinforced Cement Concrete without Dowel bars including formworks and expansion contraction & longitudinal joints as per design and as per IRC-62-2014, over a prepared base a per approved mix design and finishing to lines and grade as per Drawing for Pavement thickness less than 200mm in Low Volume Roads. PCC Grade M30 with minimum Cement Content @375kg/cum cum 4391.00 108.580 476775.000

278 PWD PWD ROAD 2015 8.44 (i) Providing and laying of a reinforced cement concrete pipe duct, 300 mm dia., across the road ( new construction ) , extending from drain to drain in cuts and toe of slopes to toe of slopes in fills, constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC pipes as per IRC: 98-2011, bedded on a 0.3 m thick layer of granular material free of rock pieces , outer to outer distance of pipes at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts , joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per IRC:98-2011 and approved drawings. Single row for one utility service metre 553.00 12.000 6636.000

279 PWD ELECT 2020 1.7 Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.7.1 Short Point Point 266.00 110 29260.00

280 PWD ELECT 2020 1.7.2 Medium Point Point 424.00 164 69536.00 527.83

281 PWD ELECT 2020 1.7.3 Long Point Point 588.00 274 161112.00

282 PWD ELECT 2020 1.8 Wiring for twin control light point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 420.00 6 2520.00

283 PWD ELECT 2020 1.9 Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 216.00 72 15552.00

284 PWD ELECT 2020 1.10 Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.10.3 Long Point Point 922.00 12 11064.00

285 PWD ELECT 2020 1.10.4 Extra Long Point I Point 1302.00 15 19530.00

286 PWD ELECT 2020 1.10.5 Extra Long Point II Point 1657.00 10 16570.00

287 PWD ELECT 2020 1.10.6 Extra Long Point III Point 1995.00 20 39900.00

288 PWD ELECT 2020 1.11 Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.11.2 Medium Point Point 942.00 12 11304.00

289 PWD ELECT 2020 1.11.3 Long Point Point 1350.00 14 18900.00

290 PWD ELECT 2020 1.11.5 Extra Long Point II Point 2315.00 8 18520.00

291 PWD ELECT 2020 1.11.6 Extra Long Point III Point 2825.00 14 39550.00

292 PWD ELECT 2020 1.12 Wiring for power plug point with 3x6 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 32 Amp SPMCB "C" curve and 6 pin 20 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.12.3 Long Point Point 1705.00 4 6820.00

293 PWD ELECT 2020 1.12.4 Extra Long Point I Point 2326.00 8 18608.00

294 PWD ELECT 2020 1.12.5 Extra Long Point II Point 3016.00 16 48256.00

295 PWD ELECT 2020 1.12.6 Extra Long Point III Point 3708.00 8 29664.00

296 PWD ELECT 2020 1.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.13.1 3 X 1.5 sq. mm in 20mm conduit Metre 92.00 348 32016.00

297 PWD ELECT 2020 1.13.2 3 X 2.5 sq. mm in 20mm conduit Metre 111.00 750 83250.00

298 PWD ELECT 2020 1.13.3 6 X 2.5 sq. mm in 25mm conduit Metre 172.00 430 73960.00

299 PWD ELECT 2020 1.13.4 9 X 2.5 sq. mm in 32mm conduit Metre 238.00 455 108290.00

300 PWD ELECT 2020 1.13.5 12 X 2.5 sq. mm in 32mm conduit Metre 288.00 110 31680.00

301 PWD ELECT 2020 1.13.6 3 X 4 sq. mm in 25mm conduit Metre 145.00 121 17545.00

302 PWD ELECT 2020 1.13.7 3 X 6 sq. mm in 25mm conduit Metre 182.00 60 10920.00

303 PWD ELECT 2020 1.13.14 6 X 10 sq. mm in 40mm conduit Metre 515.00 218 112270.00

304 PWD ELECT 2020 1.13.15 6 X 16 sq. mm in 50mm conduit Metre 772.00 180 138960.00

305 PWD ELECT 2020 1.15 Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in concealed complete as per specification and IS: 9537 (2000 Part 5) 1.15.2 25 mm Metre 53.00 2200 116600.00

307 PWD ELECT 2020 3.12 Supplying and drawing following pair 0.5 mm FR PVC insulated copper conductor, unarmored telephone wire in the existing surface/ concealed Steel/FRLS PVC conduit as per specification 3.12.2 2 Pair Metre 11.00 315 3465.00

308 PWD ELECT 2020 3.12.3 4 Pair Metre 17.00 525 8925.00

309 PWD ELECT 2020 3.13 Supplying and drawing following grade co-axial TV wire FR PVC insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ concealed Steel/FRLS PVC conduit as per specification 3.13.2 RG-11 grade Metre 27.00 100 2700.00

310 PWD ELECT 2020 3.14 Supplying and drawing UTP 4 pair Cat 6 LAN wire in existing surface/ concealed Steel/FRLS PVC conduit as per specification metre 19.00 400 7600.00

311 PWD ELECT 2020 5.4 Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification. 5.4.3 Bell push Each 80.00 26 2080.00

312 PWD ELECT 2020 5.4.9 Fan regulator (two module size) electronic stepped type moving all rounds Each 223.00 68 15164.00

313 PWD ELECT 2020 5.4.18 25/32 amp A.C. Starter switch Each 246.00 4 984.00

314 PWD ELECT 2020 5.4.22 Batten/ angle holder Each 41.00 22 902.00

315 PWD ELECT 2020 5.4.23 Blanking plate Each 28.00 186 5208.00

316 PWD ELECT 2020 5.6 Providing and fixing composite unit for computer points having modular type 1 No 6 pin 16 amp socket outlet, 1 No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3 Nos 6 amp switches, suitable G.I. box, base and cover plates, earthing the sockets and switch box including etc. as per specification. Each 816.00 42 34272.00

317 PWD ELECT 2020 5.7 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts A.C. supply, complete as per specification. 5.7.2 Deluxe Each 107.00 26 2782.00

318 PWD ELECT 2020 5.9 Providing and fixing round/ hexagonal fan box (125mm dia) depth 75mm (max.) with 12mm dia steel bar hook, 1.6mm thick MS sheet cover, in RCC slab etc. as per specification. Each 42.00 68 2856.00

319 PWD ELECT 2020 6.1 Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star and above, IS: 374:2019 including all amendments. 6.1.3 1200 mm sweep Each 1697.00 68 115396.00

320 PWD ELECT 2020 6.6 Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) 1400 rpm exhaust fan in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9 6.6.1 300 mm sweep Each 2446.00 32 78272.00

321 PWD ELECT 2020 6.8 Supplying, installation, testing and commissioning of following sizes fancy exhaust fan having built in louvers in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9 6.8.2 300 mm sweep Each 1270.00 2 2540.00

322 PWD ELECT 2020 6.11 Supplying and fixing following sizes of down rod of 15/20mm dia M.S. pipe of thickness 2 mm to ceiling fan including painting with matching colour etc. as per specification. 6.11.3 90 cm long Each 58.00 68 3944.00

323 PWD ELECT 2020 6.12 Providing and fixing phenolic laminated sheet cover of 180 mm dia 3 mm thick on the fan box etc. as per specification. (If provided at the time of installation of ceiling fan) Each 56.00 68 3808.00

324 PWD ELECT 2020 6.16 Supplying, installation, testing and commissioning of following sleek LED panel down lighters (luminaries) in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.16.2 36 watt, size 600 x 600mm Each 2342.00 60 140520.00

325 PWD ELECT 2020 6.17 Supplying, fixing, testing and commissioning of following LED lamps with inbuilt electronic driver heat sink and all other accessories in existing holder/ luminaries as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.17.5 12 Watt Each 215.00 22 4730.00

326 PWD ELECT 2020 6.19 Supplying, installation, testing and commissioning of following LED tube light fitting including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification and IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.19.3 18/20 watt {4 feet} Each 443.00 268 118724.00

327 PWD ELECT 2020 6.28 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. 6.28.7 60 watt Each 3622.00 16 57952.00

328 PWD ELECT 2020 6.23 Supplying, installation, testing and commissioning of following 230/250 volts LED Post Top Lantern fitting with perplex cover/decorative diffuser, electronic ballast and all other accessories on existing gate column/ pole bracket, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9 . LED chip efficacy ratio ≥ 100 lumens /watt. 6.23.1 25 Watt Each 2686.00 4 10744.00

329 PWD ELECT 2020 6.50 Providing and fixing wooden board of suitable size (18''x 24'') for energy meter etc complete as per specification. Each 123.00 1 123.00

330 PWD ELECT 2020 6.69 Supplying, installation, testing and commissioning of following LED fitting (luminaries) down lighters in round/ square shape shall be made up of Die Cast Powder coated housing complete with electronic driver ,heat sink and all other accessories on surface/ in false ceiling etc. as per specification. P.F. should be greater than 0.9 LED chip efficacy ratio ≥ 100 lumens /watt and Total harmonic distorsion (THD) of less than 10%.6.69.4 18/20 Watt Each 2221.00 76 168796.00

331 PWD ELECT 2020 7.10 Providing and fixing metal clad, TP&N switch fuse unit (re-wirable), 415/500 volts, with porcelain re-wireble fuses including drilling holes on the board, connections, earthing the body etc. as per specification. (Thimbeling shall be paid separately). 7.10.3 100 amps Each 3493.00 1 3493.00

332 PWD ELECT 2020 7.18 Providing and making interconnection in cubical panel between BBC and switchgears with following size copper strip of length upto 50cm as per specification (To be measured separately for each phase/ neutral).7.18.1 20x3mm (100 amps) Each 173.00 64 11072.00

335 PWD ELECT 2020 7.19 Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification.7.19.1 Upto 300 mm deep sqm 6818.00 8 54544.00

336 PWD ELECT 2020 7.19.3 Above 450 mm and upto 600 mm deep sqm 8519.00 6 51114.00

337 PWD ELECT 2020 7.21 Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) copper (electric grade) bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification.7.21.2 200 amp (25x5mm) Metre 2382.00 24 57168.00

339 PWD ELECT 2020 9.1 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu. 9.1.1 3 pole MCCB, 25-63A, Fixed Thermal Release, 10KA Each 1483.00 8 11864.00

340 PWD ELECT 2020 9.1.4 3 pole MCCB, 100A, Adjustable Thermal - Magnetic Release, 25KA Each 3734.00 4 14936.00

341 PWD ELECT 2020 9.1.9 3 pole MCCB, 200A, Adjustable Thermal - Magnetic Release, 35KA Each 12006.00 2 24012.00

342 PWD ELECT 2020 9.1.12 3 pole MCCB, 400A, Adjustable Thermal - Magnetic Release, 35KA Each 14220.00 1 14220.00

343 PWD ELECT 2020 9.2 Supplying and fixing on surface/ recess following way, 240 volts SP&N MCB distribution board of sheet steel phosphatized and powder painted complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) 9.2.6 8 way, Double door Each 946.00 1 946.00

344 PWD ELECT 2020 9.8 Supplying and fixing on surface/ recess prewired horizontal type following way, 415 volts TP&N, MCB distribution board of sheet steel phosphatized and powder painted complete complete with loose wire box, terminal blocks, tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks including interconnections, earthing etc. as per specification. (But without MCB/ RCCB/ Isolator)9.8.5 4 way (4 + 12), Double door Each 5904.00 3 17712.00

345 PWD ELECT 2020 9.8.6 6 way (4 + 18), Double door Each 7794.00 5 38970.00

346 PWD ELECT 2020 9.10 Supplying and fixing SP MCB, 240 volts, 'B' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.10.1 6 amps to 32 amps Each 151.00 132 19932.00

347 PWD ELECT 2020 9.16 Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.16.3 40 amps Each 1275.00 3 3825.00

349 PWD ELECT 2020 10.7 Providing and fixing metal clad, 4 pole, on load change over switch unit (with sheet steel enclosure), 415/500 volts, in cubicle panel including drilling holes on the board, connections, earthing the body, testing and commissioning etc. as per specification. (Connecting lead if required shall be paid separately) 10.7.5 400 amps Each 26442.00 1 26442.00

350 PWD ELECT 2020 10.15 Providing and fixing following rating current transformer in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.15.5 400/5 amps Each 341.00 8 2728.00

351 PWD ELECT 2020 10.17 Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification. Each 94.00 6 564.00

352 PWD ELECT 2020 10.19 Providing and fixing penal mounting digital type ammeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification Each 975.00 4 3900.00

353 PWD ELECT 2020 10.20 Providing and fixing penal mounting 0-500 volt voltmeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.20.2 Digital type 835.00 4 3340.00

354 PWD ELECT 2020 10.21 Providing and fixing penal mounting selector switch in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.21.1 For voltmeter Each 189.00 4 756.00

355 PWD ELECT 2020 10.21.2 For ammeter Each 207.00 4 828.00

356 PWD ELECT 2020 11.3 Supplying, installation, testing and commissioning following rating single phase 230 volts sine wave inverter (without battery) including connection as per specification. 11.3.3 1.50 KVA Each 5504.00 4 22016.00

357 PWD ELECT 2020 11.4 Supplying, installation, testing and commissioning following rating (Sealed Maintenance Free) lead acid battery including connection as per specification. 11.4.5 150 AH Each 14252.00 8 114016.00

358 PWD ELECT 2020 12.3 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 6209.00 6 37254.00

359 PWD ELECT 2020 12.6 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode at 0.5 Metre depth below ground level including excavation and refilling the trench etc. as per specification. Metre 752.00 80 60160.00

360 PWD ELECT 2020 12.7 Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode at 0.5 Metre depth below ground level including excavation and refilling the trench etc. as per specification. Metre 153.00 60 9180.00

361 PWD ELECT 2020 12.8 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as per specification. Metre 528.00 51 26928.00

362 PWD ELECT 2020 12.10 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ concealed conduit/ submain wiring/ cable as per specification. Metre 53.00 164 8692.00

363 PWD ELECT 2020 14.2 Supplying and laying HDPE pipe of 4kg/Sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. 14.2.1 63 mm outer dia Metre 124.00 120 14880.00

364 PWD ELECT 2020 15.3 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.3.3 2 x 10 sq. mm Metre 82.00 120 9840.00

367 PWD ELECT 2020 15.23 Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. .15.23.3 2 X 10 sq. mm (19 mm) Each 94.00 8 752.00

370 PWD ELECT 2020 23.1 Supplying, installation, testing and commissioning of centrifugal type mono-block self priming electric pump set suitable for single phase, 230 volts AC supply including connection of suction and delivery line etc. as per specification. 23.1.3 1.0 HP single phase Each 4933.00 1 4933.00

371 PWD ELECT 2020 23.3 Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification and IS: 694 (2010). Note: submersible Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant. 23.3.2 1.5 HP, single phase Each 17589.00 1 17589.00

372 PWD ELECT 2020 23.3.4 3.0 HP, three phase Each 22714.00 1 22714.00

373 PWD ELECT 2020 23.6 Supplying and fixing following dia HDPE pipe PE-80 Grade (8kg/sqcm) in single length in the suction/ delivery line of water supply pump etc. as per specification. 23.6.2 50 mm outer dia Metre 118.00 350 41300.00

374 PWD ELECT 2020 23.11 Supply, installation, testing and commissioning of 1-3 HP 1 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as per specification. a) Phase indicating lamps with fuses and toggle switches 1 set b) 1/2/3 HP 1 phase DOL starter with over load and no volt relay 1 No c) 25 A "C" curve DPMCB 1 No d) Voltmeter 0-250 V 1 set e) Ammeter 0-10 A 1 set Each 4030.00 2 8060.00

375 PWD ELECT 2020 23.12 Supplying and fixing M.S. clamp 50 cm long made of 50mmx5mm thick M.S. Flat for holding the pipes and submerable pump set as per specification. Metre 291.00 4 1164.00

376 PWD ELECT 2020 23.13 Supplying and fixing 300 mm dia 2 mm thick M.S. sheet cover with 3 cm edge in two past on tube well bore pipe as per specification Each 388.00 2 776.00

377 PWD ELECT 2020 23.14 Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as per specification and IS: 694 (2010). Note: Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant. 23.14.3 3x4.0 sqmm Metre 90.00 350 31500.00

378 PWD ELECT 2020 23.15 Supplying and making water proof joint with heat shrinkable joint kit including copper ferrules for following size of 3 core submersible copper conductor cable of 1.1 KV grade as per specification. 23.15.3 3x4.0 sqmm Each 264.00 8 2112.00

379 PWD ELECT 2020 23.16 Supplying and laying of approved make stainless steel wire rope of 6 mm dia for support of submersible pump set complete with tying to pump set and pump holding clamp. Metre 16.00 350 5600.00

380 PWD ELECT 2020 30.1 Earth work in all type soil except soft rock / hard rock with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling of excavated soil in trench / pit to ground level complete as per specification. cum 168.00 35 5880.00

381 PWD ELECT 2020 6.28 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. 6.28.8 90 watt Each 5531.00 20 110620.00

382 PWD ELECT 2020 7.16 Providing and making interconnection in cubical panel between BBC and switchgears with following size aluminium strip of length upto 50cm as per specification (To be measured separately for each phase/ neutral). 7.16.1 20x5mm (100 amps) Each 78.00 9 702.00

383 PWD ELECT 2020 7.19 Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. 7.19.1 Upto 300 mm deep sqm 6818.00 1.5 10227.00

384 PWD ELECT 2020 9.1 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu.9.1.1 3 pole MCCB, 25-63A, Fixed Thermal Release, 10KA Each 1483.00 2 2966.00

385 PWD ELECT 2020 9.10 Supplying and fixing SP MCB, 240 volts, 'B' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.10.1 6 amps to 32 amps Each 151.00 15 2265.00

386 PWD ELECT 2020 10.22 Providing and fixing following Time switch (timer) in existing panel including connection, testing and commissioning as per specification.10.22.2 Analoge type Each 2525.00 1 2525.00

387 PWD ELECT 2020 12.1 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 3243.00 15 48645.00

388 PWD ELECT 2020 12.12 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering, excavation and refilling the trench etc. as per specification. Metre 36.00 75 2700.00

389 PWD ELECT 2020 14.2 Supplying and laying HDPE pipe of 4kg/Sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. 14.2.1 63 mm outer dia Metre 124.00 250 31000.00

390 PWD ELECT 2020 14.3 Supplying and laying following size medium class G.I. pipe in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. 14.3.1 50 mm internal dia Metre 333.00 40 13320.00

391 PWD ELECT 2020 15.3 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.3.22 4 x 10 sq. mm. Metre 95.00 250 23750.00

392 PWD ELECT 2020 15.23 Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. . 15.23.23 4 X 10 sq. mm (22 mm) Each 98.00 150 14700.00

393 PWD ELECT 2020 19.7 Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 3mm thick anchor plate, 4 nos 20mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3 ) 19.7.2 7 metre high, dia 130mm at bottom and 90mm at top, base plate size 220x220x12mm, foundation bolts 700mm long Each 10938.00 15 164070.00

394 PWD ELECT 2020 19.9 Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole canopy of suitable dia at a angle of 102.50 including having MS triangular stiffner of size 150 X 50 X 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy, painting with one coat of approved steel primer etc. as per specification. 19.9.2 Single Over Hang 1.00 metre Long Each 1057.00 10 10570.00

395 PWD ELECT 2020 19.9.6 Double Over Hang 1.00 metre Long Each 1509.00 5 7545.00

396 PWD ELECT 2020 19.10 Erection of STEEL TUBULAR or "H" BEAM/ ISMB pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation and cement concrete collar of size 0.4 metre dia and 0.50 metre height from ground level including excavation and refilling etc. as per specification of length: 19.10.4 7 metre to 10 metre Each 2610.00 15 39150.00

397 PWD ELECT 2020 30.1 Earth work in all type soil except soft rock / hard rock with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling of excavated soil in trench / pit to ground level complete as per specification. cum 168.00 15 2520.00

398 PWD ELECT 2020 32.8 Supplying following sizes FRLS PVC insulated , PVC sheathed, steel armoured, copper conductor controle cable of 1.1 KV grade 32.8.1 2 x 1.5 sq. mm Metre 40.00 150 6000.00

399 PWD ELECT 2020 12.3 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 6209.00 4 24836.00

400 PWD ELECT 2020 13.1 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate having 4 nos holes for fixing etc. complete as per specification. Each 767.00 2 1534.00

401 PWD ELECT 2020 13.2 Making jointing of copper tape (with another copper tape, base of the finial or any other metallic object) by reverting, sweating and soldering/ nut bolting of as per specification. Each 51.00 40 2040.00

402 PWD ELECT 2020 13.3 Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as per specification.(For horizontal run) Metre 217.00 120 26040.00

403 PWD ELECT 2020 13.4 Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as per specification.(For vertical run) Metre 219.00 150 32850.00

404 PWD ELECT 2020 13.5 Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip, 125 mm long, with 4 nos. of tinned brass bolts, nuts, chuck nuts and spring washers etc. complete as per specification. Each 93.00 10 930.00

405 PWD ELECT 2020 13.6 Providing and laying copper tape 32 mm X 6 mm from earth electrode directly in ground as per specification. Metre 654.00 120 78480.00

406 PWD ELECT 2020 31.14 Painting new steel and other metallic surface with red oxide zinc chromide primer paint complete with supply of material labour etc. including preparation of surface. sqm 116.00 4 464.00

407 PWD ELECT 2020 31.15 Painting wood steel and other metallic surface with Aluminium Paint complete with material and labour including preparation of surface. sqm 143.00 4 572.00

408 PWD ELECT 2020 19.10 Erection of STEEL TUBULAR or "H" BEAM/ ISMB pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation and cement concrete collar of size 0.4 metre dia and 0.50 metre height from ground level including excavation and refilling etc. as per specification of length: 19.10.3 5.0 metre to 6.5 metre Each 1854.00 4 7416.00

409 PWD ELECT 2020 20.1 Supply and fixing following overhead line accessories. 20.1.1 Stay rod (19/20mm dia 1.8 metre long) with anchor plate 300x300x6.4mm in CC Set 512.00 8 4096.00

410 PWD ELECT 2020 20.1.2 Stay wire 7/4.0mm dia kg 39.00 40 1560.00

411 PWD ELECT 2020 20.1.6 Bow tightener Each 163.00 12 1956.00

412 PWD ELECT 2020 14.5 Supplying and fixing G.I. pipe along with wall or pole/ support with 2 Nos MS clamps for protection of under ground cable in approved manner including bolts and nuts or metal dash fasteners complete as per specification. 14.5.3 50 mm dia Metre 403.00 24 9672.00

413 PWD ELECT 2020 12.19 Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043(R 2016) -1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification: 12.19.1 With 3 metre long GI Pipes and 50 kg back filling compound. Each 10955.00 4 43820.00

414 PWD ELECT 2020 3.14 Supplying and drawing UTP 4 pair Cat 6 LAN wire in existing surface/ concealed Steel/FRLS PVC conduit as per specification metre 19.00 3000 57000.00

415 PWD ELECT 2020 5.4 Supplying and fixing following modular switch, socket, other accesSoRies on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification. 5.4.13 RJ-45 {CAT6} socket outlet Each 263.00 34 8942.00

416 PWD ELECT 2020 5.4.14 RJ-45 {CAT6} LAN, I/O Box Each 199.00 34 6766.00

417 PWD ELECT 2020 27.28 Supplying , installation , testing and commissioning of 8 Port Managable PoE Switch 10/100/1000 8 Port with 2 Giga SFP uplink, L2 Managed PoE switch , Power Budget max 96 W , single port 30 W ,AI Extend , AI VLAN as per the specifications. Each 8959.00 10 89590.00

418 PWD ELECT 2020 27.44 Supplying , installation , testing and commissioning of 4U Indoor Rack Wallmount 4U 400D With Front Glass Door Lock & Key 550 4U - (fan; cable manager; PDU) complete as required. Each 3132.00 4 12528.00

419 PWD ELECT 2020 27.73 Supply, installation and testing for HDMI cable. Metre 462.00 30 13860.00

420 PWD ELECT 2020 27.74 Supply installation and testing for VGA cable. Metre 379.00 30 11370.00

421 PWD ELECT 2020 26.2 Suppying , installation , testing and commissioning of Fire alarm Control panel (UL Listed) suitable for 252 addressable points (Detector & Devices). Comprising of the following system components: Operating units, Periphery boards, Power supplies,System enclosures, with battery backup 24hours and 30minutes, Each 125740.00 1 125740.00

422 PWD ELECT 2020 26.9 Suppying , installation , testing and commissioning of Intelligent Addressable Multi-sensor Smoke detector: Multi-criteria addressable fire detector that incorporates photoelectric and thermal sensors,Polarity insensitive utilizing SureWireTM technology,Tri-color detector status LED with 360° viewing,Field-selectable application profiles,Superior EMI immunity, Remote sensitivity-measurement capability,Automatic environment compensation,UL Listed and ULC Listed; FM Approved. Each 2986.00 60 179160.00

423 PWD ELECT 2020 26.10 Suppying , installation , testing and commissioning of Intelligent Addressable Heat detector: Provides seven (7) field-selectable settings in the 135° í 174°F (57.2° í 78.9°C) temperature range ,Tri-color detector-status light-emitting diode (LED) with 360° viewing,Polarity insensitive utilizing SureWireTM technology,Superior EMI / RFI Immunity,UL521 Listed and ULC Listed; FM Approved. Each 2787.00 22 61314.00

424 PWD ELECT 2020 26.11 Suppying , installation , testing and commissioning of Intelligent Addressable Type Manual Call Point: Intelligent Manual Fire Alarm Box is constructed of durable, molded and polycarbonate material that is matte finished in red with raised white lettering Single-action,Pull-down lever is down, until manually reset,Polarity insensitive via SureWireTM technology Each 4317.00 6 25902.00

425 PWD ELECT 2020 26.13 Suppying , installation , testing and commissioning of Conventional Type Hooter with Strobe: Hooter with Strobe. Wall Mount models feature field selectable candela settings of 15/30/75/110cd and 135/185cd. Ceiling Mount models feature field selectable candela settings of 15/30/75/95cd and 115/177cd. UL Listed, ULC, FM approved. NFPA Compliant. Red. Each 5084.00 6 30504.00

426 PWD ELECT 2020 26.14 Suppying , installation , testing and commissioning of Response Indicator for above false ceiling detector Each 156.00 12 1872.00

427 PWD ELECT 2020 26.15 Suppying , installation , testing and commissioning of Intelligent Addressable Relay control module for Hooter Interfacing and supervising normally open (N.O) or normally closed (N.C) contacts,Integral single-pole, double-throw (SPDT) relay (up to 4 amps) ,Multi-color light-emitting diode (LED) indicates system status, UL Listed & ULC Listed; FM Approved Each 4277.00 4 17108.00

428 PWD ELECT 2020 26.16 Suppying , installation , testing and commissioning of 2 core x 1.5 sq.mm Armoured FRLS fire cable Metre 509.00 864 439776.00

429 PWD ELECT 2020 26.17 Supply and erecting of following ISI marked Fire extenguishers on wall/ column including erecting bracket etc complete. 26.17.5 CO2 type Fire Extinguisher ISI marked confirming to IS:15683:2018 Capacity 4.5Kg. INITIAL CHARGE:- Carbon dioxide used in extinguishers shall comply with IS 15222. FIRE RATING:- 55B. Complete with Hose Assembly and horn , locking arrangement, operation manual, bracket with two screw and sleeve Each 8222.00 4 32888.00

430 PWD ELECT 2020 26.17.1 ABC Fire Extinguisher 9KG Nitrogen Store Pressure As per IS: 15683:2018 Body Sheet Not Less Then 2mm Thickness, CE Mark NRV Valve With ABC Powder 90% UL 299 FIRE RATING: 6A, 144B. With all accessories. Each 5,468.00 2 10936.00

431 PWD ELECT 2020 3.14 Supplying and drawing UTP 4 pair Cat 6 LAN wire in existing surface/ concealed Steel/FRLS PVC conduit as per specification metre 19.00 3000 57000.00

432 PWD ELECT 2020 11.3 Supplying, installation, testing and commissioning following rating single phase 230 volts sine wave inverter (without battery) including connection as per specification. 11.3.3 1.50 KVA Each 5504.00 1 5504.00

433 PWD ELECT 2020 11.4 Supplying, installation, testing and commissioning following rating (Sealed Maintenance Free) lead acid battery including connection as per specification. 11.4.5 150 AH Each 14252.00 2 28504.00

434 PWD ELECT 2020 27.11 Supplying , installation , testing and commissioning of 4 MP Bullet Camera weather & dust proof IP based Fixed Lens day/night Camera (IP67 , IK 10) , 1/3” 4MP PS CMOS Image Sensor, H.265 and H.264 triple-stream encoding, WDR(120dB), Day/Night Support, UL ,CE FCC Certified as per the specifications. Each 6353.00 26 165178.00

435 PWD ELECT 2020 27.12 Supplying , installation , testing and commissioning of 2 MP DOME Camera weather & dust proof IP based Fixed Lens day/night Camera (IP66) 2Megapixel CMOS Image Sensor,H.265 / H.264 triple-stream encoding , WDR(120dB), Day/Night UL, CE, FCC Certified as per the specifications. Each 5094.00 14 71316.00

436 PWD ELECT 2020 27.21 Supplying , installation , testing and commissioning of 32 Channel NVR 4 Sata port Up to 32 channel IP camera input , Max 200Mbps incoming bandwidth ,Smart H.265+/H.265/Smart H.264+/H.264 dual codec decoding , Up to 8MP resolution preview and playback , Support 4 SATA HDDs up to 6 TB each, 2 USB(1 USB3.0, 1 USB2.0) , 1 HDMI / 1 VGA simultaneous video output , ONVIF Version 2.4 conformance , Alarm In / out 16/4 , Two way talk 1 Channel Input, 1 Channel Output RCA , 2 RJ-45 port (10/100/1000Mbps), 1 RS485, 1 RS232 as per the specifications. Each 26449.00 2 52898.00

437 PWD ELECT 2020 27.27 Supplying , installation , testing and commissioning of 8 Port Giga PoE Switch 10/100/1000 8 Port with 2 GigaJ 45 uplink, PoE switch ,AI Extend , AI Vlan as per the specifications. Each 6711.00 8 53688.00

438 PWD ELECT 2020 27.31 Supplying , installation , testing and commissioning of 16 Port Giga PoE switch 10/100/1000 16 Port with 2 Giga SFP uplink, PoE switch Power Budget 150 watt ,Single Port Max 30W , AI Extend ,AI VLAN as per the specifications. Each 16605.00 4 66420.00

439 PWD ELECT 2020 27.39 Supplying , installation , testing and commissioning of 8 TB Surveillance Hard disk drive Complete as required Each 21655.00 1 21655.00

440 PWD ELECT 2020 27.49 Supplying, installation, testing and commissioing of following size LED Monitor, table/wall mount with inbuild speaker minimum 5Wx2,with minimum 1 No of HDMI and USB port including remote control, connecting cable, batteries, and all accessories, connection etc complete as per specification. 27.49.2 43 inch Each 43178.00 2 86356.00

441 PWD ELECT 2020 27.73 Supply, installation and testing for HDMI cable. Metre 462.00 120 55440.00

442 PWD ELECT 2020 27.74 Supply installation and testing for VGA cable. Metre 379.00 30 11370.00

443 PWD ELECT 2020 24.3 Supplying of approved make split type Air Conditioner unit with cooling unit (copper coil) and condensing unit (copper coil) including 5 years compressor warranty and standard length of upto 3 metre of copper piping with insulation, etc complete as per specification: 24.3.2 1.5 ton split type capacity 4500 kcal / hr (3 star). Each 33375.00 18 600750.00

444 PWD ELECT 2020 24.3.3 2.0 ton split type capacity 6000 kcal / hr (3 star). Each 48012.00 16 768192.00

445 PWD ELECT 2020 24.4 Installation of split type Inverter/Non Inverter Air Conditioner unit, cooling unit on wall inside and condensing unit on out side wall/ ceiling/ floor at desired locations with existing standard length of copper piping with insulation and power cable including providing and fixing necessary good quality powder coated MS frame etc complete as per specification. (Extra length of copper piping and power cable shall be paid extra on linear basis) Each 2,110.00 34 71740.00

446 PWD ELECT 2020 24.10 Supply, connecting and fixing extra length of copper piping for split type air conditioners of following dia and approved quality with insulation sleave etc complete as per specification 24.10.1 5/8 " Metre 375.00 360 135000.00

449 PWD ELECT 2020 24.7 Supply and fixing of approved make wall mounting type voltage stabilizer with input volts 160-250, output volts 200-240 volts and double step relay on desired location with necessary fixing material including connection etc complete as per specification. 24.7.1 4 KVA Each 3832.00 18 68976.00

451 PWD ELECT 2020 24.11 Supplying and fixing good quality powder coated MS frame for installation of out door unit of split type Air Conditioner at desired location with atleast 6 nos steel fastners etc complete as per specification Set 435.00 34 14790.00

452 PWD ELECT 2020 24.12 Supplying, connecting and fixing 15mm dia PVC flexible drain pipe (reinforced with nylon threads) in drain outlet of split type air conditioners etc complete as per specification Metre 14.00 340 4760.00

453 PWD ELECT 2020 22.1 Suppy, installation, testing & commissitioning and putting into operation and final testing of automatic lift complete with ARD and all standard equipments, accessories and control equipments as per manufacturer's design and as per CPWD specification (Part III LIFTS) and fulfilling following requirments on turn key basis. A. Type : Passenger lift B. Load : 8 passenger/ 544 Kg C. Speed : 1.0 metre per second D. Contol : AC2 E. Operation : Microprosser based simplex collective selective with/without lift attendent F. Total rise : About 9 mtrs G. Landings : 4 All on same side H. Floors served : G,1,2,3 I. Signals : Digital car position indicator, car travel direction indicator in car & at all landings J. Lift shaft size : About 1900 mm width X 1900 mm depth, finished with plaster (size as per actual site conditions) K. Lift car size : About 1300 mm width X 1100 mm depth L. Car entrance : Minimum Clear opening 800 mm wide X 2000 mm high protected with car door M. Landing entrance: Clear opening 800 mm wide X 2000 mm high protected with landing door N. Car door : Stainless steel /Glass Door two pannel telescopic/centre opening flush type O. Landing door : Stainless steel /Glass Door two pannel telescopic/centre opening flush type P. Door operation: Automatic electric power operated door with infra red protection Q. Car interior : Stainless steel pannel with hair line/ mirror/moon rock finish on all sides R. Car floor : Hard wood covered with PVC/ marblex tiles S. Car ceiling & lighting : Fluorscent lighting concealed by suspended false ceiling with plain acrylic diffuser. The frame of suspended false ceiling shall be of powder coated aluminium T. Car ventilation : Pressure fan with anodised aluminium grill U. Emergency lighting in car: Battery operated Emergency lighting in the lift car V. Intercom system : Battery operated Intercom system in lift car, machine room and control room W. Emergency alarm : Battery operated alarm bell system in lift car & contol room X. Position of machine room: Directly above the lift shaft Y. Electric power supply : AC 415 Volts 3 phase 50 Hz terminated in machine room Z. Fire man switch : Fire man switch at main landing termanal Job 1360184.00 2 2720368.00

454 PWD ELECT 2020 22.2 Add or deduct for providing all additional parts/ equipments or for enhancing the capacity of parts/ equipments in automatic lift for 8 persons, speed 1.0 m/sec for every additional floor beyond initial G+3 floors. each additional floor 94457.00 -2 -188914.00

455 PWD ELECT 2020 2.7 Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in surface FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 2.7.1 Short Point Point 227.00 4 908.00

456 PWD ELECT 2020 2.7.2 Medium Point Point 347.00 4 1388.00

457 PWD ELECT 2020 2.7.3 Long Point Point 465.00 8 3720.00

458 PWD ELECT 2020 1.9 Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 216.00 4 864.00

459 PWD ELECT 2020 1.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.13.2 3 X 2.5 sq. mm in 20mm conduit Metre 111.00 120 13320.00

460 PWD ELECT 2020 6.27 Supplying, installation, testing and commissioning of following LED Bulk Head fitting complete with Electronic Driver Heat sink Capacitor and all other accessories, including connection, earthing etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. IP65 6.27.1 10 watt Each 1140.00 16 18240.00

461 PWD ELECT 2020 9.4 Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) 9.4.4 4 way Double door Each 1716.00 2 3432.00

462 PWD ELECT 2020 9.11 Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.11.2 6 amps to 32 amps Each 148.00 16 2368.00

463 PWD ELECT 2020 9.22 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.22.3 63 amps Each 2329.00 2 4658.00

464 PWD ELECT 2020 12.3 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 6209.00 8 49672.00

465 PWD ELECT 2020 12.5 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including soldering, excavation and refilling the trench etc. as per specification. Metre 513.00 160 82080.00

466 PWD ELECT 2020 15.3 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.3.23 4 x 16 sq. mm. Metre 103.00 120 12360.00

467 PWD ELECT 2020 24.23 Supplying, installation, testing and commissiong of following size drinking water cooler storage type ISI marked, eco friendly non CFC refrigarant, water tank and cooler cabinet sheet material- stainless steel {grade AISI 304} with thickness>= 0.8 mm, with PUF insulation including all accessories connection etc complete as per specification. 24.23.2 60/120 Ltrs/hr Each 34581.00 2 69162.00

468 PWD ELECT 2020 24.24 Supplying, installation, testing and commissiong of following capacity of RO purification system with UF/UV/TDS controler and UV lamp {IS 14724 Ultra voilet disinfection} and minimum three stage purification, automatic on/off, output water conferming standard IS 10500 with inbuild storage tank including all accessories connection etc complete as per specification. 24.24.1 25 Ltrs/hr output capacity Each 23508.00 2 47016.00

Say in 630.70 Lacs

Sub Engineer S.D.O. P.W.D Sub Division No-1 Durg Executive Engineer P.W.D Durg Division Durg

Department Name Code SOR Name SOR UOM Name UOM Code false6329

Bastar Urban Public Transport Society (BSTUPTS) BSTUPTS ELECTRIC ELECT Percentage %

Bilaspur Urban Public Transport Society (BSPUPTS) BSPUPTS NON SOR NS Per mile %O

Chhattisgarh Department of Agriculture (CGDA) CGDA BRIDGE PWD_BRIDGE 1000 no. 1000 no.

Chhattisgarh Handicraft Board (CGHCB) CGHCB PWD BUILDLING PWD BLD 1000No. 1000No.

Chhattisgarh High Court, Bilaspur (CGHC) CGHC PWD ROAD PWD ROAD Siemens Per meter A/V

Chhattisgarh Housing Board (CGHB) CGHB Acre ACR

Chhattisgarh Infotech Promotion Society (CHiPS) CHiPS Activity unit AU

Chhattisgarh Medical Services Corporation Ltd. (CGMSC) CGMSC Bag BAG

Chhattisgarh Police Housing Corporation Ltd (CGPHC) CGPHC Book BK

Chhattisgarh Rajya Beej Evam Krishi Vikas Nigam (CGRBEKVN) CGRBEKVN Box BOX

Chhattisgarh State Civil Supplies Corp. Limited (SCSC) SCSC Gallons per hour (US) BPH

Chhattisgarh State Industrial Development Corporation (CSIDC) CSIDC Bottle BT

Chhattisgarh State Mandi Board (CGSMB) CGSMB Cubic sentimeter /second C3S

Chhattisgarh State Minor Forest Produce(Trading & Developme) Co-Operative Federation Ltd (CGMFPFED) CGMFPFED Canister CAN

Chhattisgarh State Power Distribution Company Limited (CGSPDCL) CGSPDCL Carton CAR

Chhattisgarh State Power Generation Company Limited (CGSPGCL) CGSPGCL Cubic Centimeter CCM

Chhattisgarh State Power Transmission Company Limited (CGSPTCL) CGSPTCL Cubic decimeter CD3

Chhattisgarh State Warehousing Corporation (CGSWC) CGSWC Centiliter CL

Chhattisgarh Text Book Corporation (CGTBC) CGTBC cm cm

Department of Animal Husbandry and Dairy (DAHD) DAHD Centimeter CM

Department of Home Guard and Civil Defence Chhattisgarh (HGCD) HGCD Square centimeter CM2

Department of Panchayat and Social Welfare (DPSW) DPSW Crate CRT

Department of School Education (DSE) DSE Case CS

Department of Technical Education (DTE) DTE Cu.Mtr. Cu.Mtr.

Directorate of Fisheries (DF) DF cum cum

Durg-Bhilai Urban Public Transport Society (DBUPTS) DBUPTS cum.km cum.km

Food and Drug Administration (FDA) FDA Days DAY

Health Department (HD) HD Degree DEG

Indira Gandhi Krishi Vishwavidyalaya (IGKV) IGKV DFLT DFLT

Korba Urban Public Transport Society (KRBAUPTS) KRBAUPTS Decimeter DM

Koriya Urban Public Transport Society (KRYAUPTS) KRYAUPTS Drum DR

Mineral Resources Department (MRD) MRD Dozen DZ

Naya Raipur Development Authority (NRDA) NRDA EACH EA

Panchayat and Rural Development (PARD) PARD each each

Public Health Engineering Department (PHED) PHED each additional floor each additional floor

Public Works Department (PWD) PWD each cut each cut

Raigarh Urban Public Transport Society (RIGUPTS) RIGUPTS each test each test

Raipur Collectorate (RC) RC each tree guard each tree guard

Raipur Development Authority (RDA) RDA each tree guard each tree guard

Raipur Urban Public Transport Society (RUPTS) RUPTS Enzyme Units / Milliliter EML

Rajnandgaon Urban Public Transport Society (RNDGUPTS) RNDGUPTS Enzyme Units EU

Rural Engineering Services (RES) RES Fluid Ounce US FOZ

Sarguja Urban Public Transport Society (SUPTS) SUPTS Feet FT

State Urban Development Agency (SUDA) SUDA Square foot FT2

Urban Administration and Development Department (UADD) UADD Cubic foot FT3

Water Resources Department (WRD) WRD Gigajoule FY

gram act.ingrd /liter G/L

Gram act.ingrd. GI

Gram /liter GLI

Gram /square meter GM2

Gram/Cubic meter GM3

Gallons per mile (US) GPM

hectare hectare

Joule /kilogram JKG

Kilogram act.ingrd KAI

Kilogram /cubic decimeter KD3

Kilogram/Mol KGM

Kilogram /Second KGS

Kilogram / cubic meter KGV

kg act.ingrd /kg KIK

Kilojoule/kilogram KJK

Kilojoule/Mol KJM

Square kilometer KM2

Kilometer/hour KMH

Kelvin/Minute KMN

Kelvin /Second KMS

Kilonewton per square meter KNM

Kilovoltampere KVA

Liter per 100 km LHK

Liter /Minute LMI

Liter /Molsecond LMS

Liter Per hour LPH

1/square meter M-2

Mol per cubic meter M:M

Megawatt hours M..

Meter /Hour M/H

Mol per liter M/L

Meter /second M/S

Square meter M2

Square meter/Coat M2C

Square meter/second M2S

Cubic meter /Hour M3H

Cubic meter/second M3S

Milligram/liter MGL

Milligram /cubic meter MGQ

Square mile MI2

Microsecond MIS

Milliliter act.ingr. MLI

Square millimeter MM2

Cubic millimeter MM3

Millinewton/meter MNM

Miles per gallon (UG) MPG

Millimol per liter MPL

Millipascal seconds MPS

Meter/second squared MS2

Microsiemens per centimeter MSC

Newton/meter NM

Newton/Square millimeter NMM

one RCC jaali tree guard one RCC jaali tree guard

one RCC jaali tree guard one RCC jaali tree guard

P.cumt. P.cumt.

P.Point P.Point

p.sq.mtr p.sq.mtr

P/sq.Mt. P/sq.Mt.

Pascal second PAS

Megavoltampere PCT

per cm height per letter per cm height per letter

per cm height per letter per cm height per letter

per cubic centimeter per cubic centimeter

Per Km. Per Km.

per letter per letter

Per mtr Per mtr

per pouch per pouch

per test per test

per tonne per tonne

per tonne capacity per tonne capacity

per.mtr per.mtr

Parts per billion PPB

Parts per million PPM

Parts per trillion PPT

Number of persons PRS

Pound Per Sq inch PSI

Pint, US liquid PT

Per Ton Per KM PTPK

Quart, US liquid QT

quintal quintal

Gramm/cubic centimeter RHO

RUNNING METRE RMT

Thousand Hours THR

Ton/Cubic meter TOM

DEFAULT UNIT DESCRIPTION XXX

Square Yard YD2

Microgram /liter µGL

Microgram /cubic meter µGQ

LIST OF APPROVED MATERIALS

NAME OF WORK- Construction of Proposed NEW Building for Divisional Joint Director Fund, Accounts and Pension and Divisional Finance and Accouts Training Institute I/c Water Supply & Sanitary fittings, Bore well, Tube well, Boundary wall, C.C. Road & Electrification works at Malviya Nagar, Durg Distt.-Durg (C.G.)

S.No. Name of Item Modular

1 Switches/Sockets 1. Hevell's 2. Legrand 3.Schneider 4. Anchor

2 PVC Wires (Fire Ratardant) 1.5 Sqmm. / 2.5 Sqmm./4 Sqmm & 6 Sqmm. 1. KEI 2. Polycab 3. RR cable 4. Finolex

3 PVC Pipe & its accessories (a) 2 mm Thick for concealed wiring as well as for surface 1. BEC Plast 2. Preciesion 3. Plazza 4. Polycab

4 Main Switches/Change over Switches 1. Standard 2. C&S 3. L&T 4. Schneider 5 Havells

5 MCCB,RCCB, MCB, MCB'DB & ACB, VCB Pannel 1. Standard 2. C&S 3. L&T 4. Schneider 5 Havells

6 Power Cable HD 1. Polycab 2. R.R. Cable 3. Finolex 4. Havells

7 Ceiling fan 1200 mm / 1400 mm 1. Usha 2.Havell's, 3.Crompton 4. Polar

8 Fresh air Fan 1. Bajaj 2. Crompton 3. Usha

9 LED light (luminaries) LED Bulb & LED Street light fitting & LED flood light 1. Philips 2. Crompton 3. Ledvance 4. Bajaj 5. Wipro 6. Havells

10 Pump 1. Kirlosker 2. Crompton 3. Texmo 4. KSB 5. CRI

11 CCTV 1. CP PLUS 2. Honey well 3. Godrej

12 Fire Alarm 1. Honey well (Notifier ) 2. Siemens

13 Lift 1. Kone 2. Thyssenkrupp 3. Otis

14 Air Conditioner 1. Voltas 2. Daikin 3. Blue star

Note:- In one building one make accessories/ fitting will be allowed.