REPAIR TO HARDSTANDING, PATH, DRAIN, CULVERT AT HALDIGHATI LINES AREA AT JAIPUR MIL STN UNDER GE (S) JAIPUR

Amount

Demolition PCC any description and any position (Path/Drain/ Hardstanidng ) not otherwise specifically provided for complete all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar or cement lime mortar complete as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls surface, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified.

M&L PCC Type C-2 (1:3:6) 40 mm graded Stone aggregate in surfaces channel or drains complete all as specified and as directed.

M&L Brick work with subclass 'B' bricks (old size), straight or curved on plan exc 6 m mean radius built in cement mortar 1:6,complete all as specified and as directed.

M&L rendering 15mm thick in cement mortar 1:4 on stone/ brick/ concrete surfaces or surface other than fair face of brick work of walls, finished fair & even, complete all as specified

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified

M&L Hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface all as directed. , complete all as specified

M & L 75mm thick cement concrete (1:4:8) type D2 using 40mm graded stone aggregates as in sub-base to floor, approns etc, complete all as specified

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 grade, set, jointed over 25 mm thick sand cushoning complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern in footpath, parks, lawns, drive ways or light traffic parking etc., made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L Chequered cement concrete tiles 20xcmx20cmx25mm thick , set , jointed and pointed in neat cement slurry in floor with grey cement and pigments to match with existing complete as specified.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25 mm thick over 15 mm thick screed bed in CM (1:4) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M &L Providing precast cement concrete louvres and jallies, 40 mm thick type B0 (12.5 mm crushed stone agggate ) set in CM 1:4 (measured solid), including all mouldings but excluding frame, including dismantling for louvers Jallies complete all as specified and as directed.

M&L for providing cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and othe similar bands, plinth courses, bed plates, copings, kneelers, apex post, stones, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

M&L mildsteel Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L mildsteel Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 for portions framed and hung as gates including pintle hinges,stops, hand-made sliding bolts etc complete all as specified and as directed.

Demolition of RCC as in Roofs, floors, beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat, rough finish surface,complete all as specified and as directed.

M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

S & F Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Ditto all as per item no 24.00, but 6mm to 8mm dia in spacers or stirups all as specified.

M & L RCC 1:2:4 type B1 using 20mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Akhil Enterprises

UNIVERSAL INFRAPROJECT PVT LTD

Rakesh Choudhary Contractor

JAGDAMBA CONSTRUCTION COMPANY

MSR INFRATECH

J.J.ENGINEERING

RAMJI LAL & SONS

Sh. Manoj Nagar