Mechanical works of general annual maintenance/repair of Lakhawati head regulator at km 82.428 of Madhyaganga canal located in District- Hapur.

Amount

Greasing, Oiling of all components of lifting mechanism of gate (excluding rollers) after proper cleaning with replacing grease cup/grease nipple as required including cost of all material, labour, T&P etc required for proper completion of work from gate no. 1 to 3

Applying cardium compound on steel wire rope, rope drum of gate after proper cleaning including cost of all material, labour, T&P and scaffolding with safety arrangement required for proper completion of work from gate no. 1 to 3

General repairing and servicing of central hand drive unit system by detaching, dismantling & changing required damaged/broken, spare parts and reassembling, refitting, greasing and testing including cost of all material, labour and T&P etc required for proper completion of work from gate no. 1 to 3

Rectifying defective alignment of gate by adjusting length of steel wire rope and other allied work as required including cost of all material, labour, T&P, jigs and fixtures, scaffolding etc as required for proper completion of work from Gate no. 1 to 3

Painting of shed on superstructure of lakhaoti head regulator by applying 1 coat of red oxide zinc chromate primer and 2 coat of high class synthetic enamel phiroza blue paint of standard make after proper cleaning, scrapping the surface including cost of material, labour T&P and scaffolding bridges with proper safety arrangement as required for proper completion of work.

Painting of chequerd plate of lakhaoti head regulator by applying 1 coat of red oxide zinc chromate primer and 2 coat of high build black bituminous paint of standard make after proper cleaning, scrapping the surface including cost of material, labour T&P and scaffolding bridges with proper safety arrangement as required for proper completion of work.

Repairing of M. S. chequered plate of super structure of Lakhaoti head regulator by gas cutting and electric arc welding as per requirement to site, including cost of gas electrodes and other required materials, labour and T&P required for proper completion of work by Gas cutting

Repairing of M. S. chequered plate of super structure of Lakhaoti head regulator by gas cutting and electric arc welding as per requirement to site, including cost of gas electrodes and other required materials, labour and T&P required for proper completion of work by Electric arc welding

Greasing of rollers of gate after cleaning replacing grease nipple stud/cap as required including cost of all material, labour, T&P etc. for proper completion of work in gate no. 1 to 3

Repairing of back guide roller by detaching it from gate opening side, side cover plate of both side, welding, turning, facing and polishing of cover plates and rollers and roller shaft as required, then making groove on cover plate for water seal, making connecting stud holes assembling with bearing as per sample, water seal, gas kit, rubber packing, greasing, fitting complete with all labour, T&P etc for proper completion of work including cost of New Bearing No. 6315 SKF/FAG

Supplying and fixing of missing roller assembly of barrage gate of spen below 12.19 Mtr including New Bearing No. 6315 SKF/FAG , rubber seal ,0 ring , grease nipple ,cover plate etc . Shifting to gate and fitting greasing and testing etc by oprating gate including of all cost of material, labour , T&P scaffolding etc for proper completion of work

Supplying & fixing of gear box/rope drum cover by m. s. sheet 2 mm thick and m.s. angle 35x35x5 mm, M. S. flat 50x5 mm with measuring ,marking, cutting by gas and welding in the workshop and carriage to workshoap to site and site to inspection path to hoist by Hydra/ Crane and erection at site with welding nuts, bolts, hinge ,holding handles etc. with two coat of synthetic enamel paint after one coat red oxide zinc cromate primer including cost of material, labour, T&P etc for proper completion of work.

Replacement of Old and Damaged Bottom Rubber Seal size 80 x 20 mm by dismantling and cutting nut, bolts by gas cutting replacing by new Rubber Seal including lifting/lowering of gate and testing the gate complete with all labour, material, T&P and scaffolding etc as required for proper completion of work in Gate no. 1 to 3

Replacement of Old and Damaged Side Rubber Seal size 120 x12 mm node dia 45 mm by dismantling and cutting nut & bolts by gas cutting, replacing by new Rubber Seal including lifting/lowering of gate and testing the gate completely including all labour, material, T&P and scaffolding etc.as required for proper completion of work from Gate no. 1 to 3

M K ENGG WORKS

M/s Pradeep Traders

UDAY ENGINEERS