Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹22.1 LAccepted-AOC | L-1 | Accepted-AOC Lowest bidder | |
| 2 | L-2₹25.5 L+₹1.3 L (5.46%)Rejected-Finance | L-2 | Rejected-Finance Other than L-1 | |
| 3 | L-3₹26.7 L+₹2.5 L (10.4%)Rejected-Finance | L-3 | Rejected-Finance Other than L-1 | |
| 4 | L-4₹27.5 L+₹3.3 L (13.8%)Rejected-Finance | L-4 | Rejected-Finance Other than L-1 | |
| 5 | L-5₹30.0 L+₹5.8 L (24.1%)Rejected-Finance | L-5 | Rejected-Finance Other than L-1 |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
20 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Tapan Naurial, GE
Garrison Engineer 864 Enggr Wks Sec, PIN-913864,C/o 56 APO
Certain repiars to joinery, roof sheets and other works in Zone B area under AGE BR II at BB Cantt Srinagar.
2023_MES_578955_1
864/WS-75/2022-23
Open Tender
Civil Works
Item Rate
180 days
B B Cantt.
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹64,000
Yes
1 May 2023
3 Feb 2023
22 Mar 2023
3 Feb 2023
20 Mar 2023
4 Mar 2023
Amount
Taking down chowkat with shutter (Without taking of shutter from frame) area not exceeding 1.50 Sqm each complete all as specified and directed.
Taking down chowkat with shutter (Without taking of shutter from frame) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and directed.
Taking down shutter of any description not exceeding 1.00 Sqm each complete all as specified and directed.
Taking down shutter of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed.
Taking down shutter of any description exceeding 2.00 Sqm each complete all as specified and directed.
Dismantling wall / ceiling boards of any description, fixed in any position with nails or screws, complete all as specified and directed .
S&F 15 mm thick 1st class soft wood Australian wooden panelling fixed with toughened and grouted as wall panelling including fillets/cornices & 9 mm ply fixing on walls and two coat varnishing, polishing and preparation with sneezing, complete all as specified and directed.
S&F khatamband pattern false ceiling, design as approved by GE with ornamental wood work made out of 1st class soft wood (Deodar) including fillets/cornices and 12mm thick BWR plywood and finally finishing with french polish (Two or more coats), complete all as specified and directed.
M&L for preparation old steel and iron surface not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint , complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails as in cupboard, drawers, showcase, cupboard shutters, wooden shelves, Partition, wooden flooring etc complete all as specified and directed.
M&L for M&L for wooden laminted flooring in strips of size 120cm long and 20cm wide and 6-8 mm thick, fixed with PVC sheet and cushion, complete all as per manufucterer's instructions and directed .
M&L 12 mm thick Plywood, grade BWR, type BB fixed with screws to timber frame work with beading as required complete all as specified and directed.
Dismantling timber scantlings in fillets, rails, posts, rafters,purlins, etc. under 40 sq. Cm in section frame work in any position complete complete all as specified and directed.
M&L for Second class hard-wood Plain fillets square, rectangular or triangular in section exceeding 6 and not exceeding 13 sqcm sectional area, clean sawn, se-cured with nails or brads in cupboard and similar work etc all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section in any position all as specified and directed.
M&L for Second class hard-wood Clean sawn in scantlings complete all as specified and directed.
S&F 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F 2nd class hard wood 30 mm thickness Glazed and skeleton shutters ( Factory made), open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed.
S&F 30mm thick Flush shutters solid core construction with Block board and plywood face panels commercial type both side, complete all as specified and directed.
S&F 30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as specified and drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat molded wood plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet as for top rail lock rail & bottom rail on either side,complete all as specified and directed.
Preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
S&F Mortice lock 4 levers (brass), vertical type, size 100 mm complete all as specified and directed.
Dismantling of AC (Corrugated or semi corrugated etc) sheets in roof covering including ridges complete all as specified and directed.
S&F for 0.60 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 as directed by engr-in charge.
S&F for 0.60 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 , complete all as specified and directed.
M & L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as inroof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
M &L appling two coat of synthetic enamel paint on new steel surface over one coat red oxide of any description not otherwise described over width or girth, incl preparation of surfaces, complete all as specified and directed.
S&F in repairs GI water tubing medium grade 15mm bore galvanized with all fittings & fixture complete to walls and ceilings or laid in floors including Taking up or down steel tubing and connections, including cleaning for refixing , complete all as specified and directed.
S&F in repairs GI water tubing medium grade 20mm bore galvanized with all fittings & fixture complete to walls and ceilings or laid in floors including Taking up or down steel tubing and connections, including cleaning for refixing, complete all as specified and directed.
S&F in repairs 10 ltrc cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc, complete all as specified and directed.
S&F in repairs vitreous china squatting pan Orissa pattern 580 X 440 mm long with integral foot rest , S or P trap including connection to trap and to flushing pipe etc complete including making good to floor, complete all a specified and directed.
S & F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed 15 mm size, complete all as specified and directed.
S&F in repair plate rack of stainless steel of size 900mm x 750mm x 250 mm with steel shelves and hanging arrangments for utensil, complete all as specified and directed.
S&F in repair centre hole mixer for mixing hot & cold water, suitable for wash hand basin, cast copper alloy with dual capstan head, chromium plated, fancy type, screwed down, high pressure with lettered Hot & Cold with long screwed shanks and fly nuts, screwed for iron pipe, suitable for 15mm bore, complete all as specified and directed.
S&F in repair chromium plated toilet paper holder fixed with brass screw, complete all as specified and directed.
S&F in repair corner glass shelf 300mm x 300 mm (with brackets), complete all as specified and directed.
S&F in replacement glass shelf assembly, consisting of 5.50mm thick sheet glass, 12cm wide with chromium plated brackets, guard and railing 60cm long, complete all as specified and directed.
S&F in repair CP soap dish, heavy duty, fixed with cadmium plated brass screws, complete all as specified and directed.
S&F in repair 15mm bore angle valve, cast copper alloy, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for union, complete all as specified and directed.
S&F in replacement chromium plated health faucet, telephonic type with CP flexible arms 1.0 mtr long, suitable to fixed to 15mm bore CP angle valves, complete all as specified and directed.
S&F CP jet spray including CP flexible pipe for EWC and fixed., complete all as specified and directed.
S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.
S&F in 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane all as specified and as directed.
S&F in 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed.
S & F Continuous (piano) hinges, mild steel, bright finish or elec trogalvanised, Width of flaps (when open) 30 mm, complete all as specified and directed.
S&F for 150 mm long aluminum handles, cast type, anodized, complete all as specified and directed.
S&F for 150 mm long Aluminium anodised, barrel tower bolts of ex truded section and fixed, complete all as specified and directed.
S&F for 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
S&F for 100 mm long aluminium anodised Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.
S&F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed.
S&F in replacement 20mm dia decorative powder coated drapery curtain rod, bright finish including decorative side domes, brackets and minimum 8 Nos curtain rings Per RM length, complete all as specified and directed.
S&F for cast iron body hydraulically door closer regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and directed.
S&F for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140 mm overall length of cover plate, complete all as specified and directed.
S&F for Powder Coating (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F for powder coating of any colour (Thickness or powder coating not less than 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 75mm long (2 Nos.) suitable handle (1 No.) , complete all as specified and directed.
M&L 12 mm thick prelaminated particle board, Exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber or aluminium frame work , complete all as specified and directed.
S&F 4.8 mm thick tinted glass and glazing with rubber beading and aluminium glazing bar in each panel complete all as specified and directed
Dismantling of wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
M&L for mild steel framed work such as in angle iron frames for manhole cover, staging, shed and similar work etc., confirming to Fe-290, Grade E-165, complete all as specified and directed.
S&F single lever CP wall mixture with non telephonic type 15mm bore, complete all as specified and directed.
S&F in replacement 15mm bore stop valve, cast copper alloy, chromium plated, fancy type, without shank and cup concealed type, screwed both ends for iron pipe or for union, complete all as specified and directed.
S&F in replacement CP shower rose, over head type, size 100x100mm, square in shape, single flow, complete all as specified and directed.
S&F in replacement vitreous chine wash down water closet (pedestal pattern) white, complete including connection to drain pipe and to flushing pipe, anti-syphonage pipe etc., complete all as specified and directed.
S&F in replacement 15mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, complete all as specified and directed.
S&F in replacement 15mm bore angle valve, cast copper alloy, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for union, complete all as specified and directed.
S& F towel ring CP 150 mm dia fixed in repair complete all as specified and directed.
S&F in replacement 20 mm dia CP tubular towel rod, 60cm long between flange, complete all as specified and directed.
Dismantling of unserviceable floor, hearth or wall tiling incld cement mortar bedding (but not backing) and removal of rubbish/ debris from premises of MOD Land complete all a specified and directed.
M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:4) etc complete all as specified and as directed.
All as per Srl item No. 72.00 above but in skirting over and including rendering/ backing coat 10 mm thick in CM 1:3.
M&L colored glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm/300x 450x 7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match, over and including backing/ rendering 10mm thick in cement mortar 1:3, complete all as specified and directed.
M&L for coloured Virified Ceramic tiles 600x600x10 mm thick (square/ rectangular) polished, a in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick in CM 1:4 screed bed or bedding layer, complete all as specified and directed.
All as per Srl item No. 75.00 above but in skirting over and including rendering/ backing coat 10 mm thick in CM 1:3.
M&L for 2 mm thick Linoleum, plain coloured, laid dry in floors including stretching, cutting and fitting, complete all as specified and directed.
Demolition of brick work or stone masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius, built in cement mortar 1:4 as in manhole, wall, Drain etc, complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. and removal of debris outside MoD land, complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.
M&L for Preparing surfaces plastered or unplastered distempering walls with 2 coat of distemper oil emulsion white or tinted over 1 coat alkali resistant priming paint complete all as specified and directed
M&L for Preparation of new plastered surfaces by applying two coats of cement base paint , complete all as specified and directed
S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to d warf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmt complete all as specified and directed
Dismantling of cast iron or reinforced concrete/ PVC pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.
M&L for 75 mm dia PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
All as per Srl item No.86.00 above but fixed to walls with suitable MS clamp,
All as per Srl item No.86.00 above but 110 mm dia fixed to walls with suitable MS clamp,
M&L for 75 mm dia PVC (SWR) bends any radius complete all as specified and directed
All as per Srl item No.89.00 above but 110 mm dia
M&L for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed
M&L for 75 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed
S&F for PVC connections 15mm size with PTMT nuts of length 450, complete all as specified and directed. complete all as specified and directed
All as per Srl item No.93.00 above but 600 length
S&F CP grating suitable for 75/100mm bore floor trap and fixed with white cement, complete all as specified and directed.
M & L for 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite, over and including 20mm thick screed bed in CM (1:3) complete all as specified and directed.
Dismantling trellis work (Jafri) in two way including taking as under of battens in trellis (posts and rails measured separately), complete all as specified and directed
M&L for 2nd class softwood, wrought, as in 40mm x 12mm laths (fixed straight or diagonally) in two way trellis work with 75mm spaces in the clear including 75mm x 50mm fillet (notched to take ends of laths) all around and fixed, complete all as specified and directed
M/S SHAH CONSTRUCTION COMPANY
M/S Tajamul Ah Buchh
Alishan Builders
M/S BASHIR AHMAD MIR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .