SPECIAL REPAIRS TO BALANCE WORK TO SWIMMING POOL (P-461)

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness(below or above ground level)

M&L for RCC Design Mix (M-30 ) as in Kerbs,Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses Note: Desidn Mix concrete should be supplied by RMC only.

M&L for TMT bars, 8 mm dia & over, cut to length,bent to shape required including cranking and bending spirally for hooping for columns, hooking ends and binding with & including Mild steel wire annealed not less than 0.90mm dia or securing with clips complete all as specified and as directed.

M&L Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better fair finished

M&L for filling of Moorum/red bajri filling in floors or pavings laid in layers n.exc 15cm thick,spread levelled and rammed including watering.

M&L for 20mm thick screed or bedding layer in CM 1:6 for laying of chequered tiles.

M&L for chequred cement concrete tiles 30cm x30cmx25m thick set and jointed and pointed with grey cement and pigment all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone agg) in surface channels and drains

M & L for rendering 15mm thick cement plaster (1:4) on fair faces of brick or concrete surfaces.

M&L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M & L for complete removal of existing treatment on ceilings and applying three coats of white wash after Chalk whiting, on plastered surfaces all as specified.

M & L for complete removal of existing treatment on walls and applying two coats of Oil bound Distemper after applying a priming coat of alkali resistant priming paint and white putty 2 to 3 mm thick all as specified.

Preparing old wooden surface of Door chowkats and shutters (panneled and Flush) and applying two coats of synthetic enamel paint over a coat of pink primer.

M & L for complete removal of Existing treatment on wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of Anti fungal paint (Apex or Equivalent) on external walls of Bldg of height upto 15 m above GL all as specified.

S&F Framed work such as grills,grating in drain channels plates with holes with ends of wire shouldered and/or riveted or froged into spikes and smilair work confirming to Fe-290 Gde-E-165.

M & L for 150 mm thick cement concrete Type C-2, 1:3:6 (40 mm graded aggregate) as in sub base of flooring under chequred tiles. Note: concrete mix supplied through RMC only.

Removing completely existing water proofing treatment of any description and of any type including top layer of plaster / china mosaic wherever occurs over roof and chhajja surfaces and scrubbing the surface with wire brush and cleaning washing down with water to receive new cement plaster / PCC layer and removing the waste material/debris to a distance exc. 1500m but n.exc. 2000m complete all as specified and directed.

M&L for screed bed or bedding layer 15mm thick in cement mortar (1:4) with water proofing compound for laying membrane (Note:- Water proofing compound shall be measured seperately

M&L for water proofing treatment to RCC roof slab all as specified below and as directed:- (a) Apply one coat of bituminous primer @ 0.25 Kg/Sqm. (b) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area. (c) Laying APP polymer modified membrane 4mm thick with non woven polyster reniforcement weighing not less than 4.00 Kg/Sqm applied by torch application method. (d) Apply a coat of blown type bitumen grade 85/25 heated to working temperature of 180 degree centigrade and applied at 1.20 Kg/Sqm of the surface area. (e) Apply a coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over 15 mm thick screed bed in cement mortar (1:6) complete all as specifed and as directed.

Taking down steel/aluminium windows/ventilator/door /partition of any size with all fittings complete

Supply and fix aluminium powder coated ventilator partly fixed and partly louvered type without sash bar, section as per designation 63400 of IS 737 , frame and intermediate made out of aluminium section of size 50.80 x 25.4x 0.95 mm (catalouge No 14027 of M/s Jindal) including necessary jointing clip, rubber packing, anodised snap beading srews alongwith 4.00 mm thick pin headed glass for louvers and glazing etc complete all as specified and as directed

S&F 1.25 mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type

Preparing new or previously untreated steel surface of any description, over 10 cm in width or girth not other wise described and appying two coats of red oxide primer.

S&F powder coated aluminium (15 micron anodised) Single leaf door on pivots alongwith hydraulic door closer lock handels & other necessary builders hardware 5mm thick tinted glass fixed with rubber beading in top panel and glazing clips MS clamps and 12 mm thick both side laminated MDF board upto 1.25 m height from bottom with approved aluminium sections as given in JINDAL catelogue @ 1.2Kg/Sqmtr as approved by GE.

S&F Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

Taking down chowkats with shutters(without taking off shutters from the frame) exc1.5 sqm and n.exc 4 sqm each

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each

S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in 2nd class hard wood

S&F Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats of 2nd class hardwood 30 mm thick

Preparing new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F 150 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F 100 mm long Aluminium anodised, barrel tower bolts of extructed section and fixed

S&F 100 mm thick Butt hinges, medium weight, cold rolled mild steel, and fixed

S&F Aluminium bow handles, cast type, anodised 125 mm long

Taking down cement or cement lime plaster, any description on brick / concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for cleaning and removal all scale and dirt,water etc from under ground tank of capacity 1.0 to 1.5 lakh litres and from mouth of circulating pipe etc using coir brush and detergent /bleaching powder and washing gthe water tank including re-connecting the outlet and wash out pipe and writing (date of cleaning) to match with the existing complete all as directed.

Providing treatment to damaged floors/wall honey combed areas by Floor screed/ Baclking coat with Cement mortar mixed with Dr. Fixit CP Polyplus Admix @ 0.8 % by weight of cement, for thickness as per requirement matching with existing floor (minimum thickness to be 20 mm), including surface preparation as per manufacturer's instructions, curing etc. complete all as directed by Engineer-in-charge.

M&L for Speciallized glazed swimming pool tiles of size 24.7 cm x 12.2 cm and 8 mm thickness (tolerance of +- 3% in thickness as per manufacturer) of any colour fixed to wall and floor of aeration tank using glass tiles adhesive of thickness of approx 3-6 mm thick combed with noched trowel and placed and tapped properly to ensure complete coverage of backside of tiles over adhesives including cleaning/ preparation of newly plastered surfaces to be tiled and making it free form wax, grease, polish, paints etc all as per manufacturers instructions and sealing the joints of tiles with tile mate epoxy goutes makes HR Johnson swimming pool tiles/ equivalent product by somany/ Kajaria. Glass Tiles adhesive : Roff tile adhesive/ Dr Fixit fevimate XL/ equvalent product by fosroc/ sikha. Epoxy Grout : Roff rainbow / equivalent product by sikha. Note The rate quoted is deemed to be included for necessary scaffolding and protect measure to work inside underground circular tank of deoth upto 6M below GL

Cutting opening/holes in cement concrete walls (any desscription) not exc 100 Sqcm and trimming surface as required.complete as directed by engr in charge.

S&F mild steel screw bolts 16 to 20mm dia (machine made) with heaxognal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm and n.exc 30cm long complete all as specified and as directed.

S&F Rolled mild steel section in stairs ,ladders (framed) incl stringers treads landing , hand rails including distance pieces, cleats etc quality conforming to Fe 410-W (Gde E250) quality-A.

Preparing new steel Surfaces of any des-cription, exceeding 10cm in width or grith, not otherwise described and applying two coats of black bituminous paint paint over a coat of red oxide

Taking down copper/aluminium wiring (light, fan, socket or power) complete and including fitting and fixture such as switches, socket, ceiling rose, pendent, regulators, etc Note : Job including for taking out old gutties, screw, nails etc and making good to disturbed surface of wall, floor etc including to match with the existing surface.

Point wiring with 1.5 sq mm single core PVC insulated cable 1100 V grade with multistranded copper conductor drawn through PVC casing and capping with all accessories fixed to wall /roofs ceiling etc and including provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly including fabricated steel terminal box made out of 1.6 mm thick MS sheat concealed in the wall with 3 mm thick laminated sheet top cover/PVC fiber board of suitable size for mounting the switches , socket outlets , fan regulators etc all as specified and all as specified and as directed for following :-One switch socket 3 pin outlet 5 amp on independent board

Point wiring with 2.5 sq mm single core PVC insulated cable 1100 V grade with multistranded copper conductor drawn through PVC conduit with all accessories fixed to wall /tower through binding wire of suitable size etc and including provision of 2.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly including fabricated steel terminal box made out of 1.6 mm thick MS sheet concealed in the wall with 3 mm thick laminated sheet top cover for mounting the switches , socket outlets , fan regulators etc all as specified and as directed.

Switch piano flush type single pole one way 15 amp all as specified and as directed.

Switch socket combination 2 in 1, 3 pin 5/15 amp flush type all as specified and as directed.

Switch socket combination 2 in 1, 5 amp flush type all as specified and as directed.

Vertical type DB, provision for FP MCCB 32 amp, 25 KA (v-tech) N3 frame up to 200 amp 4 ways, IP 43 protection, shrouded neutral bar & pan assembly with flexible connecting ling with MCCB 32 amp, 25 KA four pole 415 V fixed in the wall with suitable nut and bolt including matching the existing surface all as specified and as directed.

MCBDB SPN 8 ways double door with 240 volt, 200 rated bus bar with all accessories flush in the wall including matching the existing surface all as specified and directed.

MCB single pole and neutral 35-63 amps, 240 volts, complete as in repair all as specified and directed.

MCB 6 to 32 amps single pole 240 volts all as specified and directed fixed in repair (24 Nos of MCB SP 20 amp for the existing panel, 12 Nos for DB 8 way)

Isolator 4 pole 63 amp of existing panel all as specified and as directed fixed in repair (2 Nos for new panel and 3 Nos for existing panel)

Turbo LED flood light 160W with secondary optics made in pressure die cast housing and heat sink in aluminium extursion with IP 67 protection, including clamp made out of 40x6mm MS flat for mounding of flood light with suitable size of nuts and bolts all as specified and directed

Taking down old unservicable MH light/flood light/MV light of any watt from the tower/roofs by disconnecting of electrical connection, nut & bolt all as directed by Engineer-in-Charge.

Sheet metal enclosure 4 ways double door triple pole and neutral with 415 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surface all as specified and directed.

M&L for sub main wiring drawing through PVC Conduit with four runs of single core 4 sq mm and two runs of 2.5.0 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade complete all as specified and as directed. Note:- Four Runs of Wire, one run of earth wire & one run of casing Capping will be measured and paid as one RM

S&F in replacement sub main wiring drawing through PVC casing and capping with two single core 6.0 sq mm and one run of 4.0 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade all as directed.

Taking down old unservicable Sub Main of any size from the wall/trenches by disconnecting of electrical connection and GI/PVC saddle etc all as specified and as directed.

RK AND SONS CREATION

Om Construction

SAI SAMARTH ENTERPRISES

Mehta Construction Co.

M/s S.D Construction Co