CA NO GE/C-25/2021-22 CERTAIN INTERNAL REPAIRS TO TILING SANITARY FITTING JOINERY WORKS AND REPAIR TO HARDSTANDING CHAIN LINK FENCING EXTERNAL RAIN WATER DRAIN INTERLOCKING TILES AND CHEQURED TILES POUND WALL PARKING SHED AND OTHER MISC

Amount

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified and as directed by Engineer-in-Charge.

Taking down shutter of any description areaexc 1.0 Sqm but n exc 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge.

M&L Plain, solid, straight chowkats and frames made out of 2nd class hard wood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed, complete all as specified and as directed by Engineer-in-Charge.

S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face pannel, commercial type on both sides. Flush shutters shall have teak wood edging as specified in IS and magic eye, complete all as specified and as directed by Engineer-in-Charge.

S & F 35 mm thick second class hard wood factory made Glazed and skelton shutters open rebated and prepared to receive glass, gauge etc edges of framing plain champered or rounded fitted with cut & metered beads for securing glass etc sized of membane shutter as specified in SSR Part I Section 8, Clause 8.23 (a) supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge.

S&F for 35 mm thick second class hard wood plain framed factory made panelled shutter (two panel) with lock rail and panel 12 mm veneered particle board with commercial veneering on both faces . The size of rail and style as per IS 1003/SSR part -1 complete all as specified and as directed by Engineer-in-Charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized iron staples including wooden beadings, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 300mm long, Aluminium alloy anodised, sliding door bolt matt finish snot less than 16 mm dia bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts extruded section or cast aluminum alloy, complete all as specified and as directed by Engineer-in-Charge.

S&F Steel work in tubular frame, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and as directed by Engineer-in-Charge. Note :- frame provide over chhajja upto two storey building including scaffolding .

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. Note :- The steel sheets,to be provide over MS frame such as chhajja upto two storey building including scaffolding .

Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge..

M&L for 5mm thick rendering in cement mortar 1:3 finished even and smoothe surface on ceiling, chajja in double storey building etc complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair faces other than fair faces of brick or concrete in CM (1:6) even and smooth without using extra cement upto height of five storey, complete all as specified and directed by Enginer in Charge.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed by Engineer-in-Charge.

M&L for two coats of distemper oil emulsion on new plastered surfaces including applying 2-3 mm thick birla wall care putty, surfaces finished even and smooth and including a coat of alkali resistant primer and prepration complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paintof DULUXWeather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.

M & L for non skid 600x600x8 to 10mm thick coloured ceramic tiles(joint less) as in floor over 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles complete all as specified directed by Engr-in-Charge, and approved by GE

M & L for non skid 600x600x8 to 10mm thick coloured double charge vitrified tiles(joint less) as in floor over 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles ,complete all as specified and directed by Engr-in-Charge, and approved by GE

All as per item No 20 above but 10mm thick on rendering surface in CM 1:4 on vertical surfaces of wall as in skirting including taking down of existing skirting on walls complete all as specified directed by Engr-in-Charge.

M& L for non skid coloured ceramic tiles (300x300x)7 to 8mm thick in floors, etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed for laying floor in CM 1:6 complete all as specified and directed by Engineer in Charge, approved by GE

M&L for coloured ceramic tiles (300x600mm)x7mm thick on vertical surfaces on skirting dados and risers to steps etc including rendering 10mm thick cement mortar in CM 1:4 ,complete all as specified and directed by Engr-in-Charge, approved by GE

Dismantling of stone slab marble of any description or thickness in floors, aprons etc laid, bedded & jointed in any mortar, complete all as specified and as directed by Engineer-in-Charge.

M & L for 18-20 mm thick Black Granite stone work (table rubbed and polished) over 15mm thick Screed bed or bedding layer in CM 1:4, as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,front and side of slab mouldedand polished complete all as specified and as directed by the Engineer-in-Charge.

M&L for 18-20 mm thick machine cut Udaipur green stone flooring over 15mm thick screed bed in cm 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing, laid in designed complete all as specified and as directed by Engineer-in-Charge.

M & L for 18-20mm thick Udaipur green marble laid over and including 15mm thick screed bed in CM 1:6 as in tread ,step of stair case in one piece including cutting jointing moulding marble polishing complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous China coloured European type WC with "P" or "S" trap for 100 mm bore , including connection to drain and to flushing cistern with pipe 32mm dia PVC pipe and fixing bolts complete incl seat cover and PVC low level flushing cistern dual type10 ltrs capacity , C P Jet complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 15mm dia CP bib tap fancy type chromium plated .complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs fancy type looking mirror of size 900x600x6mm with 100 mm wide fancy type border fixed with 4 Nos stain less steel clips complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs fancy type PVC fibre body toilet cabinet size 600x450x6mm fixed with brass screw and cup and washer complete all as specified and as directed by Engineer-in-Charge.

S & F in repair Glass Corner Shelf 8mm thick including CP railing radius 250mm complete all as specified and directed by the Engineer-in-Charge.

All as above item No 32 but 300mm radius complete all as specified and directed by the Engineer-in-Charge.

S & F in repair curtain rod stainless steel 20 mm of dia complete all as specified and directed by Engineer-in-charge

S&F in repair Health faucet, CP brass with 1.50m long flexible pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Glass shelf assembly 450mm long 150mm wide with cp railing complete all as specified and as directed .

S & F brass chromium plated towel rack 600 mm size including a pair of CP brass bracket complete all as specified and as directed by Engineer-in-Charge.

S&F in repair two way stop valve 15mm dia fancy type chromium plated all as specified and directed by the Engr-n-charge .

S&F in repairs CP brass shower rose 125mm size suitable for 15mm bore pipe with C P arms complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel water tubing and connections of 15 mm dia of bore complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel water tubing and connections of 20 mm dia of bore complete all as specified and as directed by Engineer-in-Charge.

M&L in repair GI tubing ISI marked medium grade 15mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified incl taking down.

All as per item No 42 above but 20mm bore.

S&F Rotational moulded polythylene 1000 Ltr capacity water storage tank(Cylindrical vertical with closed top composite type or lid should be thread type) hoisted and fixed in position with float valve and tank connection nipple including dismantling of pvc tank complete all as specified and as directed by Engineer-in-Charge.

S&F Rotational moulded polythylene 500 Ltr capacity water storage tank(Cylindrical vertical with closed top) hoisted and fixed in position with float valve, tank connection nipple including of dismantling pvc water tank complete all as specified and as directed by Engineer-in-Charge.

Dismantling boarding , any description, fixed in any position with screws complete all as specified and as directed by Engineer-in-Charge.

S&F 6mm thick plywood with 5Nos of ply, grade BWR, type BB, fixed with screws to timber frame work etc, complete all as specified and as directed by Engineer-in-Charge.

S & F 18/ 19 mm thick block boards, grade 2 quality, commercial type, fixed with screws to timber frame work cupboards and shutters of Almirahs all as specified and directed by Engineer in charge .

S&F for Prelaminated particle board 18/19mm thick, exterior grade prelaminated both sides with decorative choice laminations in Kitchen cuboards and shutters of Kitchen cupboards / almirahs, complete All as specified and directed by engr in charge

S&F PVC 18 mm thick PVC celluca ply one side prelam fixed with solvent cement adhesive and screws as in kitchen cabinet complete all as specified and as directed by Engineer-in-Charge.

S&F factory made PVC kitchen and cupboard frame of the size 75mmx40mm with a wall thickness of 4mm, made out of extruded 4mm thick prelame PVC sheet reinforced with 15mmx15mm MS tube of 19 gauge thickness througout the fame and mitre cut at two corners and jointed with 2 Nos of 150 mm long brackets of 10mmx10mm MS tubes.The door frame shall be fixed to the wall using 65/100mm long MS screw through the frame by using PVC fastners . A minimum of 4 Nos. of screws to be provided for each vertical member and minimum 2 Nos for Horizontal members complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhat or frames of door/ window / ventilators with shutter(Without taking off shutter from the frame) n.exc 1.50 sqm each complete all as specified and as directed by Engineer-in-Charge.

S&F fibre glass Reinforced Plastiic (FRP)door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be coverec with fibre glass from all sides . MS stay shal be provided at the bottom to steady the frame complete all as specified and as directed by Engineer-in-Charge.

S&F FRP Door shutter shall 30mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer . Made with retardant grade unsaturated Poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitble blocks of seasoned wood inside at required places for fixing of fittings , cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 complete all as specified and as directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side complete all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening complete all as specified and as directed by Engineer-in-Charge.

S&F 150mm long extruded alumiunium alloy handle fabricated type anodized (D type) complete all as specified and as directed by Engineer-in-Charge.

S&F 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complete all as specified and as directed by Engineer-in-Charge.

S&F 100 mm long (size) butt hinges medium weight, cold rolled, mild steel,complete all as specified and as directed by Engineer-in-Charge.

S&F Powder coated anodized aluminium windows and ventilator fixed having aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips rubbers packing anodized including sheet glass 5.5 mm thick omplete all as specified and as directed by Engineer-in-Charge.

S&F Powder coated anodized aluminium windows and ventilator shutters, side hung type with sash bars,purposely made for fixing window type air conditioners,exhaust fans etc;aluminium section weighing 0.55 kg/m two nos. of aluminium coated 100 mm long tower bolt,one no. 100 mm long aluminium handle , One no. 150 mm long Aluminium peg stay,two nos aluminium coated 100mm long Hinge ,rubber beading , in each window shutters complete all as specified and as directed by Engineer-in-Charge.

S&F powder coated aluminum frame for windows/ventilators with one or more rebates including grills, jointing cleats for fixing etc complete all as specified and as directed by Engineer-in-Charge.

Supplying & Fixing in opening Solid PVC double door frame (Factory made) of size 50mm x 95mm made out of 5mm plain colour PVC sheet reinforced with MS tube, complete all as specified and as directed by Engineer-in-Charge. on Sl page No 150 of SSR (Part -II).

S & F factory made solid PVC moulded door shutter 35mm thick (styles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm thick prelam PVC sheet on back face complete all as specified and as directed by Engineer-in-Charge.

S & F factory made solid PVC wire gauged door shutter 35mm (styles) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded prelaminated PVC C channel having a prelam PVC sheet strip of 20mm with stuck inside with solvent cement for stiles and prelam PVC sheet for top, lock and bottom rail on either side and as gap insert for top rail and bottom rail including wire gauge and shall be stainless steel alloy wire cloth 0.36mm nominal dia of wire and average aparature 1mm, wrapped on an additional square 8mm MS solid tube and this tube shalll be welded to MS tube and wire gauge shall be stretched to tighten firmly complete all as specified and as directed by Engineer-in-Charge.

M&L for roof treatment as per the description below:- a) Plain cement concrete average 50 mm thick 1:2:4 type B0 (using 12.5 mm graded stone aggrigate )for levelling course for providing slope in the roof @ 1:40 gradient b) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces. c) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification And apply two coat of silver aluminum paint complete all as specified and as directed by Engineer-in-Charge..

Demolition of brick work or stone masonry built in cement mortar in any position including segregating serviceable/unserviceable bricks/stones complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) and removing out side MD land complete all as specified and as directed by Engineer-in-Charge.

Dismantling/ demolition posts or struts embedded in soil or concrete etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed by Engineer-in-Charge..

Dismantling fencing wiremesh, any type complete all as specified and as directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) n exc 0.5 cum getting out in any type of soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm and covering and removal of surplus soil n exc 50m and making good surface complete all as specified and as directed by Engineer-in-Charge.

M&L cement concrete Type A-1 1:1.5:3 (20mm graded aggregate) as in walls or retaining walls, any thickness, size or shape including pillasters, butresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed by Engineer-in-Charge.

M&L PCC 1:2:4 type Type B-2 (using 40mm graded crushed stone agg) as in surface channel and drains complete all as specified and as directed by Engineer-in-Charge.

M&L Brick (old size) work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.

All as per item No 76 above but as in half brick walls built in CM 1:4.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors or fixed on walls 110mm dia fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

M&L for providing cement concrete type B-1 1:2:4 (20mm graded aggregate) as in copings complete all as specified and as directed by Engineer-in-Charge.

M&L for providing 50 mm thick cement concrete 1:2:4 type B1 (20 mm graded aggregate) as in flooring/subbase complete all as specified and as directed by Engineer-in-Charge..

M&L for providing 100 mm thick cement concrete 1:2:4 type B1 (20 mm graded aggregate) as in hard standing complete all as specified and as directed by Engineer-in-Charge.

Forming contraction (Dummy) Joints 65mm deepx10mm wide filled with sealing compound Grade 'A' omplete all as specified and as directed by Engineer-in-Charge.

M&L machine pressed precast concrete chemical treated interlocking paver block confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade including 25 mm thick sand cusion of shape and size decided by GE complete all as specified and as directed by Engineer-in-Charge.

M&L 15 mm thick screed bed or bedding layer for laying floor finishes of tiles CM 1:6 complete all as specified and as directed by Engineer-in-Charge.

S&F Chequered cement concrete tiles 25cm X 25cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and as directed by Engineer-in-Charge..

M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting, etc including embeding in concrete and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

Fixing only chain link fencing, including line wires, any mesh and size to any type of standards, rails, straining bolts, etc, including provision of binding wire complete all as specified and as directed by Engineer-in-Charge..

Supply only chain link fencing mild steel galvanised fencing of mesh size 100X100 mm with not less than 2 mm dia of GI wire complete all as specified and as directed by Engineer-in-Charge.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

S&F 12mm mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n exc 5cm long complete all as specified and as directed by Engineer-in-Charge.

Dismantling of wrought iron or mild steel work of any description complete all as specified and as directed by Engineer-in-Charge.

S&F framed work such as grills framed guard bars etc and similar work conforming to Fe 410.0 or Fe 310.0 complete all as specified and as directed by Engineer-in-Charge.

S&F Framed work as in doors or gates of angle or other section with gusset plates,rails,braces,etc,complete,drilled for fixing of steel sheeting or other covering,doors,etc.to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging,and also fastening and fixing complete all as specified and as directed by Engineer-in-Charge.

S&F in repair galvanized 2 strand steel barbed wire 2.24 mm barbed with 2mm dia barbs at 75 mm spacing and straning and fixing to fencing post with staple or steel pins etc complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of syanthetic anamel paint over one coat of red oxide complete all as specified and as directed by Engineer-in-Charge..

s&f Galvanished punched tape concertina coil com;lete having galvanized spring steel core wire 2.5 mm dia cold drawn steel, galvanised pundhed complete all as specified and as directed by Engineer-in-Charge.

Note :- Total amount of Sch of credit is Rs. 77878.00 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit.

imran construction company

GIAN ENGINEERS

SHREE RAM BUILD TECH

LAMBA ENTERPRISES

V M CONSTRUCTION

m/s VK construction company

S.K. ENTERPRISES