REPAIR TO SECURITY WALL, FENCING AND GATE ROOFING AT HALDIGHATI LINES AND QUEENS ROAD IN ZONE-III AREA UNDER GE(S) JAIPUR AT JAIPUR MIL STN

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L Brick work with subclass 'B' bricks (old size), straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified

Taking down cement plaster or cement lime plaster/ tiles of any descrption on PCC/ stone surface/ brick surfaces of wall or ceiling including raking outs joints, hacking for key scrubbing down with water etc complete all as specified.

M&L rendering 15 mm thick in cement mortar 1:4 on wall of other than fair faces brick work or concrete surface, finished even and fair without using extra cement complete all as specified

M&L for preparding the new plastered surfaces and applying two coats of cement base paint on walls complete all as specified

M&L Preparation of new Steel surface of any description, not otherwise, described, over 10cm width or girth and Applying two coats of synthetic enamel paint on steel & iron surfaces over one coat of red oxide complete all as specified

Dismantling asbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering complete all as specified.

S&F 2mm thick fibre Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in roof, wall etc. complete all as specified

M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Dismantling old framed work and M & L Framed work such as gates, grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming toFe-290(Gde E-165) complete all as specified.

Dismantling Posts embedded in Concrete, brick work, masonry, etc. or struts (wood, or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified

S & F in repairs chain link fencing made of 4mm dia Galvanised wire having mesh size made by wires of 100mm x 100mm staining bolts including provision of binding wire etc complete all as specified including dismantling of existing chainlink fencing wiremesh any type/size complete as specified

S&F in repair galvanised, 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails staining bolts, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc as directed ( each line wire to be measured.

Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) all as specified

M & L 75mm thick Cement concrete type D- 2,1:4:8 (40mm graded stone aggregate) as in floor/ sub floor finished fair and even complete all as specified

M & L 40mm thick Cement concrete type B- 1,1:2:4 (20mm graded aggregate) as in floor finished fair and even without using extra cement complete all as specified

M & L for Providing precast cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces,including chamfers, weatherings, throat- ing etc. and setting in CM (1:4) complete with joints to match complete all as specified

M & L for Providing precast cement concrete type B-0, 1:2:4 (12.50 mm graded aggregate)louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame set in CM (1:4) complete all as specified

Excavating in post holes ( or similar hoels ) each n exc 0.5 cum getting out and removing surplus soil to a distance n exc 50 mtr. complete all as specified

M&L cement concrete in foundation type C 2, 1:3:6 ( 40 mm graded stone aggregate) as in filling and mass concrete as specified. Note: Volume of PCC Post/ strut shall be deducted from volume of PCC in Fdn for payment purpose.

M&L applying two coats of synthetic enamel paint over a coat of red oxide, zinc chromate primer including preparation of new steel or iron surfaces n exc 10 cm width or girth, complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long and dia of shank 5 to 10 mm complete all as specified

S&F Mild steel round bars Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

M&L for preparation of old decorated plastered/ unplastered Surfaces of walls, soffits of chajjas,cornices etc and applying one coat of cement base paint , complete all as specified

M&L PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in coping including necessary form work complete all as specified

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified

M & L Chequered cement concrete tiles 20cmx20cmx25mm thick with grey cement and pigment, set,jointed and pointed in neat cement slurry in floors set over 15 mm thick screed bed in cement mortar (1:6) complete all as specified

Dismantling Stone slabs and tiles laid dry and pointed of any description or thickness in floors, aprons etc. complete all as specified

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified

All as per item No 30 above but except tiles. Note: Serviceable Interlocking tiles obtained from demoltion shall be reused for execution of this item.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified

M & L Welding in repairs n. exc 2.5cm in length, welded metal thickness N. Exc. 6mm complete all as specified

JAGDAMBA CONSTRUCTION COMPANY

R.S BUILDERS

MSR INFRATECH

M/S JALANDRA CONSTRUCTIONS

VASU ENGINEERING SERVICES

G D ENTERPRISES

SAI MAX INFRAPROJECTS

Sh. Manoj Nagar