FOR REPLACEMENT OF OLD 245KV AIR PNEUMATIC CIRCUIT BREAKER OF 220KV BITHOOR BAY BY 245 KV SPRING CHARGE CIRCUIT BREAKER AT 220KV S/S PANKI UNDER ELECTRICITY 220 KV Sub station DIVISION PANKI, KANPUR.

Amount

Complete dismantling of M/S CGL make 245 KV Air pneumatic circuit breaker with mounted frame, struture. jumpers and all 03 linkage poles, pipe line of SF 6 gas for all poles safely along with M/S Indersol make air compressors installed for 220 KV Bithoor bay at 220 KV S/S Panki, Kanpur by using hydraulic crane at site Including shifting up to store & all cost of material, T&P and labour. This work also includes opening of old earthing & opening of old cable connection. AC, DC from existing CB with proper tracing from C&R panel of Bithoor bay at 220 KV S/S Panki, Kanpur.

Fabrication/retrofitting of base structure for each pole of ABB make 245 KV spring charge SF-6 circuit breaker on old foundation by using MS plate having 20mm thickness of size 250x150sqmcm MS plate should be retrofitted as per current foundation drawing Le hole matching unit base in breaker structure by using lath machine as per site requirement. (All) cost of material, MS plate, T&P and labor will be provided by contractor on their own cost).

Carriege of 245 KV ABB make Circuit Breaker from 220 KV S/S Sikandara Kanpur Dehat to 220 KV S/S Panki Kanpur (Almost Distance 80 Km.) Including loading of 245 KV CB with the help of crane & labous at 220 KV S/S Sikandara and unloading of 245 KV CB at 220 KV S/S Panki, Kanpur with the help of crane including all cost of materials T&P and labour.

Proper, safe & complete erection of M/S ABB make 245 KV spring chareg based circuit breaker on fabricated/retrofitted structure with all 03 poles & entire CB mechanism by using hydraulic crane on 220 KV Bithoor bay at 220 KV S/S Panki, Kanpur. This work include shifting of CB from S/S store, fixing on base structure as per drawing/manual, fitting of all 03 linkage poles, pipe line of SF-6 gas for all poles assembly etc up to completion of works satisfactorily.

Commissioning of M/S ABB make 245 KV SF-6 CB by deputing \service engineer as per requirement. This work include fixing of SF-6 linkage pole pipe in each pole properly, filling of SF-6 gas in CB pole, to check opening & closing time of CB and all associated works up to completion of job satisfactorily. (All tools & tesing devices will be provided by by agency).

Proper and safe cable termination on M/S ABB make 220 KV spring charge based circuit breaker for smooth protection of 245 KV Bithoor bay at 220 KV S/S Panki, Kanpur in all associated Control Panel, Relay Panel and Bus bar protection Panel including proper ferruling with required T&P for completion of work as per drawing. This job includes making neccessary required supply and fixing of Ferule of appropriate size and no, respectively for each core of cable and its termination with crimping type lugs and all associated work to complete the job satisfactorily Contractor will arrange all required farrula, labor, lug, cable gland and T&P at his own cost

Proper & safe double side earthing of circuit breaker mechanism & each pole assembly by using 75x10 sqmm MS flat along by using proper wielding and connecting MS round bar by digging ground. This work also include two coat painting by red oxide primer and then by by two coat of green Asian Paint (Supply of 75x10 sqmm MS flat will be provided by UPPTCL.

TAJ ENTERPRISES (BID ID -5067963)

AWASTHI ENTERPRISES (BID ID -5083317)