AS PER TENDER NOTICE-05 LOT-02

Earth work by Power Transport for a lead upto 20 Km. including Excavation, Loading, Unloading, Royality, manual compaction and dressing all lift. Rates shall be applicable for lead beyond 630 m and upto 1 Km.

Earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.50 m in width or 10 sqm on plan), excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m including dressing of sides and ramming of bottoms, lift up to 1.50 m includig the getting out of all kind soil.

Providing & laying plain cement concrete 1:4:8 with cement, coarse sand & 20 to 40 mm gauge stone ballast including all materail, labour & T&P etc.

Providing and laying in position cement concrete of specified grade 1: 2: 4 excluding the cost of centring and shuttring.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarsesand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural Sources).

Reinforcement work with Bending, binding, cutting and placing in position including cost of reinforcement binding wire with all cost of labour, material and required T&P etc. complete.

Centering and Shuttering for RCC work including rent of shuttering, material, labour and T&P required for proper complition of work for slab and wall etc.

Class M-150 brick work in 1:6 cement coarse sand (of 2.25 f fineness modulus) mortar in foundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work.

12mm cement plaster in sigle coat on top of slab in single storey building finished even & smooth 1 cement: 4 coarse sand including all L/M, T&P etc.

Scraping old white or colour wash including disposal of refuse as directed by Engineer- in-charge with in a distance of 60m.

Providing and applying 2 mm thick white cement based putty of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Premium acrylic smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ applied @1.67 Ltr/10 sqm) over existing cement paint surface (apex Ultima, weather coat all guard)

Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and frame work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J and L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washer or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surfaces), excluding the cost off purlins, rafters and trusses and including cutting to size and shape wherever required.

Painting or varnishing on iron work in small areas or new wood work with one coat of ready mixed paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc required for proper completion of work.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours, shads except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fising 1 quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, botlle green, black or any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cment mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cment slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing wash basin with Cl brackets, 15 mm CP brass pillar taps, 32 mm cp brass waste of standard paattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size 630x450 mm with a pair of 15 mm CP brass pillar taps.

Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length 15 mm nominal bore.

Providing and fixing PVC waste pipe for sink or wash basin including PVC wast fittings complete Semi Rigid Pipe 32 mm dia / 40 mm dia.

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(a) 15mm nominal bore.

Providing & fixing C.P. brass Shower Rose with 15 or 20 mm inlet 100 mm diametert

Providing and fixing 600x450 mm beveled edge mirror of supperior glas (of approved qualtiy) complete with 6 mm thick hard board ground gixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pips & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same incuding testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia pipes.

P/F concealed G.I. Pipes class B complete with fitting & clamps, including cutting and making good the surface of walls etc. complete. (Internal works) 15 mm dia

P/F concealed G.I. Pipes class B complete with fitting & clamps, including cutting and making good the surface of walls etc. complete. (Internal works) 25 mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000 Ltrs

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 150 mm diameter.

Providing and laying cement concrete 1:5:10 (cement, coarse sand, graded stone aggregate 40 mm nominal size) all arround S.W. pipe including bed concrete as per standard design: 150 mm diameter.

Construction of brick massonary road gully chamber 45x45x77.50 cm with bricks in cement mortar 1:4 (1 cement :4 coarse sand) with precast Rcc vertical grating complete as per standard design with common burnt clay F.P.S. (non modular brick of class designation 7.5

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineerin- in-charge.

Providing and fixing 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter)

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 80 mm dia nominal bore.

Machinary fully Automatic Composit Machine Organic waste composting machine model 24-400 capacity 400-450 kgs/day with inbuilt shredder in stainless steel outer body

freight, Installation,Commissioning & Training Charges

50 kg/hr SH50 heavy duty twin shaft shredder for multipurpose wate 50 kg/hr SH50 twin shaft shredder with 10 H.P. motor and gear box electrical pannel reverse & forward feature (output Product: 25mm x 35 mm shredder waste).

Wooden Packaging, Transit Insurance, Freight

Electrical LT Panel For Waste Composite Machine Incommer 200A - 1 Nos & Outgoing 100A - 2 (CAT B)

Street Light 30Watt with bracket 1.5 Mtr

Flood Light 100Watt inside shed

Supply & Fixing of Automatic Street Light Controls Panel to Control 40 Street Light With Auto Features of getting light On around sunset & closing the light on sunlight. With all protection & 63A FP MCCB as Incommer & 20A MCB DP -- 8 Nos ( 5 Street Light Connection on Each MCB)

Supplying &laying of LT Cable 16 Sqmm 4 Core Aluminium Conductor XLPE insulated Armoured Cable confirimg IS: 7098 1100v grade at a depth of 750mm below ground level over a cusion of 75mm thick fine sand all around and protected with well burnt bricks on sides and top put across as dircetd by engineers in charges complete in all respect inculsing excavation and refilling. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.

Supplying &laying of LT Cable 185 Sqmm 3.5 Core Aluminium Conductor XLPE insulated Armoured Cable confirimg IS: 7098 1100v grade at a depth of 750mm below ground level over a cusion of 75mm thick fine sand all around and protected with well burnt bricks on sides and top put across as dircetd by engineers in charges complete in all respect inculsing excavation and refilling. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.

Supplying &laying of LT Cable 120 Sqmm 3.5 Core Aluminium Conductor XLPE insulated Armoured Cable confirimg IS: 7098 1100v grade at a depth of 750mm below ground level over a cusion of 75mm thick fine sand all around and protected with well burnt bricks on sides and top put across as dircetd by engineers in charges complete in all respect inculsing excavation and refilling. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.

Supplying &laying of LT Cable 35 Sqmm 3.5 Core Aluminium Conductor XLPE insulated Armoured Cable confirimg IS: 7098 1100v grade at a depth of 750mm below ground level over a cusion of 75mm thick fine sand all around and protected with well burnt bricks on sides and top put across as dircetd by engineers in charges complete in all respect inculsing excavation and refilling. the armouring of the cable shall be properly connected with the earth conductor by clamps etc.

Supplying & making LT Cable 185 Sqmm 3.5 Core end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed /XLPE Aluminium conductor Cable of 1.1KV grade as required.

Supplying & making LT Cable 120 Sqmm 3.5 Core end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed /XLPE Aluminium conductor Cable of 1.1KV grade as required.

Supplying & making LT Cable 35 Sqmm 3.5 Core end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed /XLPE Aluminium conductor Cable of 1.1KV grade as required.

Supplying & making LT Cable 16 Sqmm 4 Core end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed /XLPE Aluminium conductor Cable of 1.1KV grade as required.

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.

Providing and fixing 25 mm x 5mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required.

Wiring for circuit/submain wiring along with earth wire the following size of FRLS PVC Insulated copper conductor single core cable in surface/reccessed steel conduit pipes 4X2.5Sqmm +2X2.5Sqmm Earth Wire

Wiring for circuit/submain wiring along with earth wire the following size of FRLS PVC Insulated copper conductor single core cable in surface/reccessed steel conduit pipes 2X2.5Sqmm +1X2.5Sqmm Earth Wire

Wiring for light point/fan point/exhaust point/call bell point with 1.5Sqmm FRLS PVC Insulated copper conductor single core cable in surface/recessed medium class PVC consuit with piano type switch with MS BOX & earthing the points with 1.5Sqmm FRLS PVC insulated copper conducotr

Supplying & Fixing of following sizes of medium class pvc conduit along with acc. In surface/recess including cutting the wall & making good the same in case of reccess consuit as required

Supply & Fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6A socket & switch connection etc as required

Supply & fixing following way triple pole & neutral sheet steel MCB distribution board 415VAC on surface/recess complete with tinned copper bus bar, neutral bus bar earth bar as required ( but without MCB/isolator) 6 Way Double Door

Supplying & fixing DP Sheet Steel enclosure on surface/recess along with 25A/32A 240VA "C" curve DP MCB complete with connection, termination & testing etc as required

S&F 6A TO 32A rating 240VAC 10kA c curve MCB suitable for inductive load of Single pole in excisting MCB/DB complete with connection testing & comm. Etc as required

S&F 6A TO 32A rating 240VAC 10kA c curve MCB suitable for inductive load of Four pole in excisting MCB/DB complete with connection testing & comm. Etc as required

Please Enable Macros to View BoQ information