Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 CrAccepted-AOC C141 SUN CITY SECTOR 35 ROHTAK 124001 | ROHTAK | HARYANA | 124001 | ₹1.9 Cr | L1 | Accepted-AOC Awarded |
| 2 | L2₹2.5 Cr+₹54.6 L (28.1%)Rejected-AOC | ₹2.5 Cr+₹54.6 L (28.1%) | L2 | Rejected-AOC Rejected |
Tender Value
Refer Docs
EMD Value
₹3.2 L
Closing Date
28 Dec 2020, 4:00 pmClosed
BP Sharma
PHED No 2 Rohak
Design, construction, testing commissioning of 1.00 MLD capacity water treatment plant, Brick lined SS Tank, C.C roads, Laying the rising main Distribution lines, providing FHTC of individual household. Supply, erection, testing commissioning
2020_HRY_153074_1
AJAIB- AUGMENTATION OF WATER SUPPLY SCHEME BY RENO
Open Tender
Civil Works
Works
365 days
Rohtak
Please refer Tender documents.
3 documents required · 3 mandatory
₹20,000
₹3.2 L
5 Jan 2021
14 Dec 2020
28 Dec 2020
14 Dec 2020
28 Dec 2020
14 Dec 2020
Amount
WATER TREATMENT PLANT (WTP)Design, construction, testing & commissioning of below mentioned capacity Water treatment plant including inlet channel, Alum dozing, Flash mixing, Clarifloculator, filter box, over head Reservoir for back wash, waste water tank including all civil work, pumping machineries and electric cabling, control panels, entire piping network of suitable size DI pipe from raw water pump to inlet box of WTP, WTP to CWT & Suction Well for CW including DI specials, suitable size Sluice valves, Hodies, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed complete in all respects as per NIT (Sluice valves of make IVC/VAG) . Ajaib water works
RAW WATER PUMPING MACHINERY Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame WATER WORKS AJAIB 800 LPM X 12 M. Head
CLEAR WATER PUMPING MACHINERY Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame WATER WORKS AJAIB 1500 LPM X 45 M. Head
B/STN. AJAIB 800 LPM X 45 M. Head
PANEL BOARDS FOR MOTORS Supply, erection, testing & commissioning of wall mounted electrical L.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm and 400 mm deep having follwing items For 2 no Pumping Sets of 800 LPM x 12 m Head a) Main switch 63 amp. 1 No. (L&T Siemens, ABB)v b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 800 LPM x 12 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each)
For 2 no Pumping Sets of 1500 LPM x 45 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 1500 LPM x 45 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each)
For 2 no Pumping Sets of 800 LPM x 45 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 800 LPM x 45 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each
Supply, erection, testing & commissioning of IS marked copper wire for various motors with underground system in PVC and flexible pipes copper wire 3 core complete in all respevts with accessories like thimble etc. 10mm2 3core
25mm2 3core
Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 including cost of jointing material complete in all respect. (IVC / VAG make, Kirloskar) 100 mm i/d
Supplying,fixing, testing & commissioning of DI swing check type refluxvalve (non returned valve) PN 1.6 including cost of jointing material complete in all respect.( IVC / VAG , Kirloskar make) 100 mm i/d
Supply, fixing & testing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect 100 mm i/d
Supply, erection, fixing & testing of DI Double flanged pipe complete with all jointing materials 100 mm i/d
Sluice Valves/ Specials For Rising Mains Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 as per DNIT specification on the pumping machinery & head works including cost of jointing material (IVC / VAG make) 150 mm i/d
Supply & Fixing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect. 150 mm i/d
Design, Supply & Erection of copper wound outdoor type Transformers of required KVA as mentioned below on load tap changer or suitable capacity on higher side of standard make outdoor type, entire cable network from G.O. Switch to H.T. Metering equipment and from H.T. Metering to Transformer Main to L.T. Panel, Earthing, safety equipment and any other contingent thereto complete in all respect as per DNIT and getting it passed from Chief Electrical Officer. At Ajaib W/W = 63 KVA
Poviding & fixing in position GI elbow ISI marked complete in all respect 15 mm i/d 768x4 =3072.
Providing & fixing in position GI Nipple ISI marked complete in all respect 15mm x150mm /100 mm 768x2= 1536
Supply and Fixing of GI Socket 1/2 i/d complete in all respect and the entire satisfaction of Engineer-in-Charge (Make Jindal/Parkesh/Tata) complete in all respect
Operation & Maintenance Operation & maintenance for the complete scope of work mentioned in the DNIT & all other existing structures & piping network at water works & village (Disinfection material will be supplied by the PHED) as per schedule-IV during Defect liability period of 12 months after trial run period of 3 months & 5 years thereafter. (Will be charged to A/mtc estimate)."Defect liability period (Only items in which fault will be found then it will be replaced by the contractor at his own cost)
Operation & maintenance during 1st year
Operation and maintenance during 2nd year
Operation and maintenance during 3rd year
Operation and maintenance during 4th year
Operation and maintenance during 5th year
Bidder Name
Amount
Lalit Kumar(GSTN-06ALGPB5309Q1ZY)
SAT NARIAN(GSTN-NA)
SAT NARIAN
SAT NARIAN
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .