PROVN OF GARRAGE WITH RELATED WORKS NEAR BSO S FURNITURE YARD AND OTHER SANCTIONED WORKS UNDER AGE B R CENTRAL OF GE SOUTH BANGALORE

Amount

Excavation in post holes in hard/dense soil (or similar holes) each n.exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8 type D-2, using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

S&F rolled mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20 mm of the length indicated) conforming to Fe 410-W- (Gde-E-250) quality-A complete all as specified and directed.

S&F polycarbonate plain sheet 4mm thick fixed with self tapping screws or U hooks to steel frame etc complete all as speicified and as directed.

M&L for surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as speicified and as directed.

M&L for hardcore broken stone boulders of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base of floors complete all as specified and directed.

S&F chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Removing excavated surplus material exc. 200m and n. exc. 250m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. incl brushing neat cement slurry @3kg per sqm complete all as specified and as directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

S&F glazed ceramic coloured tiles 300x200x7 mm in skirting/dado etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc, incl raking out joints, hacking for key scrubbing down with water, etc.complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl finished the surfaces even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 incl finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of oil emulsion distemper, over a coat of primer complete all as specified and as directed.

M&L for preparing newly plastered or unplastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Taking down chowkat or frames exc 1.5 Sq.m but n.exc 4 Sq.m complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be coverd with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for styles and plain colour PVC sheets and for top rails lock rail and bottom rail on either side and as gap insert for top rail and bottom rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement supply and fix in the frame at site as specified and shown on drawing in SSR Part II - 2010, section 8

S&F 100mm stainless steel hinges with CP/brass screws complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips or sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium ally fixed complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts and extrude section and fixed complete all as specified and directed.

S&F 125 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F 4.0 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane including hacking out broken glass complete all as specified and directed.

S&F 500 ltrs rotational moulded poly-ethylene water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including dismantling old unserviceable item complete all as specified and directed.

S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F 20 mm bore gun-,metal, globe or gate valves, with irion wheel head, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F 15 mm bore medium grade galvanised water tubing, with all fitting, fixed complete to walls and ceilings or laid in floors, concealed type including taking down old unserviceable GI tubing complete all as specified and as directed.

S&F 20 mm bore medium grade galvanised water tubing, with all fitting, fixed complete to walls and ceilings or laid in floors, concealed type including taking down old unserviceable GI tubing complete all as specified and as directed.

S&F 75mm size PVC floor trap with grating incl jointing with solvent cement complete all as specified and as directed.

S&F in repair vitreous china washdown water closet pan & trap (pedestal pattern) with plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinginng device with flush pipe to pedestal pan incl all joints and connection to drain pipe and flush pipe complete all as specified and as directed.

S&F in repair PVC flushing cistern low level of 10 ltr capacity ,white ,with inlet ball valve ,float and handle including brackets complete all as specified and as directed.

S&F in repair vitreous china wash hand basin of size 630x450mm and waste pipe & waste coupling etc incl brackets complete all as specified and as directed.

S&F in repair 15 mm bore pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated screwed down high pressure with or without lattered 'Hot' or 'Cold' with long screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 15 mm bore Fancy type two way Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F 125x110 mm size SWR gully traps square or rounded mouthed type complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes with spigot & and socket ends centrifugally cast Class A in any length laid in trenches or in floorscomplete all as specified and as directed.

S&F 75mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

M&L for preparing old plastered surface of ceiling and applying two coats of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment and applying two coat of oil emulsion distemper over a coat of primer on plastered wall surfaces complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of cement based paint on wall surfaces over a coat of white wash complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggt) as in floor finish spike rolling to surfaces or making impression of expanded metal complete all as specified and directed.

Removing excavated surplus material exc 1.5 km and n. exc 5 km and depositing where directed at a level n. exc 1.5M above the starting point complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.80 mm thick plain, galvanised, mild steel plain sheeting in ridge, hips, valley gutters, drip and straight flashing (length and grith as fixed) with grade of zinc coating 275 complete all as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and girders for sliding doors fixed with angle cleats or other connecting plates, conforming to Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F steel work in tubular trusses incl special shaped washer etc., complete using ERW or incl butt welded tubes conforming to I.S. 1161-1998 grade St-240 complete all as specified and directed.

M&L for preparation of newly or previously untreated steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enemel paint over a coat of red oxide primer complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed.

M&L for 20cmx20cmx25mm thick chequerred coloured glossy finished factory made designer tiles/pavers, set and jointed & pointed in neat cement slurry as in path/floor etc including 20mm thick cement screed in CM 1:6 complete all as specified and directed. Note : The size, colour & pattern of tiles as approved by GE.

M&L for providing cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) in roof kerb or mud stops or coping for poles, rounded or chamfered complete all as specified and directed.

S&F machine pressed precast cement concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and no pigment laid over and including 50 mm thick consolidated sand cushioning complete all as specified and as directed. Note : The gap between kerb stone & paver block to be filled by cement mortar and finish to match the shade of interlocking paver block as directed.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered or riveted, or forged into spikers framed guard bars barred iron doors ladders; framed balusters walk ways railings framework of watertanks and similar work conforming to Fe-290 Gde-165 complete all as specified and as directed.

M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including 20mm PVC conduit medium grade ISI marked with accessories including necessary suitable sunken box and frame cover plate for mounting of modular switches, sockets, fan regulators and making good disturbed surfaces in CM 1:3 for one light / fan / bell point controlled by one switch, complete all as specified and directed. Note:- Switches, sockets shall be measured and paid seperately in an appropriate item of this schedule and laying / fixing of sunken box and cover with frame is included in quoted rate.

All as per item No.58 here-in-before but for one pin 5A socket outlet on independent board.

M&L for point wiring in concealed with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 2.5 Sqmm, 1100 volts grade including 2.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including 25mm PVC conduit medium grade ISI marked with accessories including necessary suitable sunken box and frame cover plate for mounting of modular switches, sockets, fan regulators and making good disturbed surfaces in CM 1:3 for one 6 pin 15A socket outlet point on independent board complete all as specified and directed. Note:- Switches, sockets shall be measured and paid seperately in an appropriate Item of Sch. "A" and laying / fixing of sunken box and cover with frame is included in quoted rate.

S&F switch modular type 5A one way complete all as specified and directed.

S&F one way switch 16A one module complete all as specified and directed.

S&Fsocket outlet 2 in 1, 3 pin, 5 Amps, modualr type complete all as specified and directed.

S&F socket outlet 6/16Amps, modular type complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals complete all as specified and directed.

S&F sheet metal enclosure SPN for DB's when MCB's to be used with 200 amps bus bar single door 4 way complete all as specified and directed.

S&F MCB DP 32Amps complete all as specified and directed.

S&F MCB SP 5 to 20Amps complete all as specified and directed.

Material and labour for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts and washers made out of GI/steel earth strip protected by GI light grade pipe of 40 mm dia and connecting to main panel board/switch board/control board all shown in electrical plate No 3 of SSR Pt I incl PCC chambers in 1:2:4 and RCC cover slab with 8mm dia MS bars reinforced at 10 cm center to center both ways including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed.

S&F highly durable surface mounted 18 watt LED batten constructed fire retardant engineering grade extruded plastic and decorative end caps, etc. complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, including taking down existing unserviceable old one. Make:- Crompton Greaves Cat part No LCTL-18-CDL or its equivalent of make Philips/ Bajaj/ Wipro.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth for foundation etc n.exc 10 sqm on plan & getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading levelling , watering and well ramming in layers n.exc 25cm in hard/dense soil complete all as specified and directed.

M&L for removing excavated material n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.

M & L for cement concrete 1:4:8 type D 2, using 40 mm graded stone aggregateas in foundations, filling and mass concrete all as specified and as directed.

M&L for sand cushioning to under ground cable in layers ( 8 cm before laying the cable and 15 cm after laying the cable and punned into 18 cm thickness) in trenches for cable protection complete all as specified and directed. Note : - Punned thickness only will be measured and paid under this item.

Supplying and laying sub class 'B' bricks locally available best quality, designation 75 for cable protection complete all as specified and as directed.

S&F LED 20 Watt post top lantern decorative, robust and reliable with transparent diffuser complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make:- C&S Cat No. LTGLC20WHPLED/W equivalent in Bajaj/Crompton Greaves.

S&F LED 1 x 45 watt street light made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP 66 protection and impact resistance of IK07 complete all as specified and as directed. Make:- Havells Cat Part No. LHETAXU7PN6J045 or equivalent in Wipro/Crompton.

Supply and errect steel tubular swaged poles, type-410 SP-22, 8.5 meter long complete with cast iron base plate, finial taper plug, bolts, nuts & screws complete all as specified and as directed.

S&F GI bracket for street light made out of 32 mm dia GI pipe medium grade 1.2 mtr length bend in shape as required including MS flat iron clamp etc complete all as specified and as directed.

Supply and fix thermoplastic IP 66/67, weather proof, corrosion free, halogen and silicon free, UV reistence, insulated and shock proof, high impact strength, flame retardant and self extinguishing, Glow wires test conducted at 960 Deg junction box suitable for terminating cable for 6Sqmm/ 10 Sqmm/ 16 Sqmm including necessary cable gland and check nut Size of M32 (incoming and out going cables) and mounting bracket clamp suitable size as per site with nut bolt washer complete all as specified and directed. Make:- Hensel Cat Part No -KF1010G and Cable Gland Cat Part No 1555.32.25

Supply and laying or fixing or passing in trenches/ on pole / through pipes, 1100 volts grade XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor of cross sectional area 4 core 6 sq mm including connection with cable glands & lugs etc and testing on completion complete all as specified and as directed. Note for item nos. 82&83 : Excavation & earth work, sand cushning and bricks,GI protection pipes shall be measured and paid seperately underrelevant items of this sch.

Supply and laying or fixing or passing in trenches/ on pole / through pipes, 1100 volts grade XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor of cross sectional area 2 core 6 sq mm including connection with cable glands & lugs etc and testing on completion complete all as specified and as directed.

S&F 9W LED bollard in decorative mushroom shape with IP 65 protection including necessary foundation, foundation bolt, nut, washers and junction box complete all as specified and as directed. Make :- Bajaj Cat Part No BLBMC 9W WW LED or equivalent in Havells/Jaquar.

SHALINI ENTERPRISES