Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹25.0 L+₹29,671 (1.20%)Rejected-Finance | L2 | Rejected-Finance Being L2 |
Tender Value
Refer Docs
EMD Value
₹48,000
Closing Date
19 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
REPAIR TO SANITARY FITTING, PLASTERING, SUNKEN FLOOR, AND MISC WORKS FOR OTM AND MD ACCN UNDER AGE B/R-I AT ITARANA, ALWAR
2022_MES_554959_2
8102/E8
Open Tender
Civil Works
Item Rate
240 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
Yes
GE Alwar
₹48,000
Yes
7 Jan 2023
1 Nov 2022
21 Nov 2022
1 Nov 2022
19 Nov 2022
6 Nov 2022
1 Nov 2022 - 5 Nov 2022
Amount
Demolition cement concrete (unreinforcement) in ground floor and paving n exc 15 cm thickness (below or above ground level) & removal complete all rubbish materials complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar or cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Demolition of brick work built in cement mortar complete all as specified and directed.
M&L brick work with old size fly ash bricks, straight or curved on plan exc 6 mean radius, built in CM 1:6 complete all as specified.
M&L brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 mean radius, built in CM 1:6 except brick complete all as specified.
M&L brick work with old size flyash bricks, straight or curved on plan to any radius, built in 1:4 as in half brick thick wall complete all as specified and directed.
Taking down cement or cement lime plaster, of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for rendering 15mm thick in CM (1:6) on stone masonry surfaces or surfaces other than fair face of brick work as on wall surfaces and finish the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM (1:4) on stone masonry surfaces or surfaces other than fair face of brick work as on wall surfaces and finish the surface even and fair. Using Water proofing compound @ 3% by weight of cement complete all as specified and directed. (Note : WPC shall be measured and paid separately).
Supply only integral water proofing compound.
M&L for rendering 5mm thick in CM 1:3 as in ceiling and finish the surface even and smooth without using extra cement complete all as specified and directed.
M&L for preparing newly plastered surfaces & applying three coats of white wash on walls complete all as specified and directed.
M&L for preparing newly plastered surfaces & applying three coat of white wash on ceiling.
M&L for preparation of newly plastered surface of wall & applying two coats of cement base paint over a coat of primer chalk whiting, complete as specified and directed.
M&L for preparation of new plastered surfaces of wall & applying two coats of distemper oil emulsion white or tinted over priming plastered surface with alkali resistant priming paint complete as specified and directed.
M&L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coats of white wash complete all as specified and as directed.
All as per item No 16.00 here-in-above but on ceiling surfaces.
M&L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint complete all as specified and as directed.
M&L for preparation of old treated surfaces of walls, plastered or unplastered and applying one coat of cement base paint of approved shade/tint. complete all as specified and as directed.
M&L for glazed ceramic tiles (coloured) in vertical surface 350x250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.
M&L for 10mm thick cement plaster in CM 1:4 on other than fair faces of brick work or stone surfaces of walls to receive tiles etc complete all as specified and directed.
M&L for screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B-1 (using 12.5mm graded aggregate) as in levelling coarse of floors and roof complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.
M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile all as specified and directed.
M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile all as specified and directed.
M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile all as specified and directed.
All as per item No 27.00 above but on vertical surface.
M&L for machine cut kota stone slab flooring 18-20 mm thick over cement slurry base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L for kota stone slab 10-15 mm thick in riser step, skirting, dado etc complete all as specified and as directed .
Taking down shutter of any decription exc. 1 Sqm and n. exc 2 Sqm each and refixing in same opening including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable scews etc. Note: Dismantling of old chowkat and S&F new chowkat shall be measured & paid for separately.
S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
Dismantling existing water tank capacity in exc 250 ltrs but n exc 500 ltr and removing from site complete all as specified and directed.
Dismantling existing water tank capacity in exc 500 ltrs but n exc 1000 ltr and removing from site complete all as specified and directed.
S&F rotational moulded polythylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position capacity of tank 500 ltrs complete all as specified and directed.
S&F rotational moulded polythylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position capacity of tank 1000 ltrs complete all as specified and directed.
S&F in repairs pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot or Cold' long screwed shanks and fly nuts, screwed for iron pipe and fixed bore of pipe in 15 mm dia complete all as specified and directed.
S&F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 20 mm dia minimum weight 210 gms complete all as specified and directed.
S&F in repair 15mm dia bib tap cast copper alloy fancy type chrominum plated crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair 15mm dia bib tap cast copper alloy with crutch or butterfly handle,screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair bib tap standard of PTMT any colour high pressure,screwed down for 15mm iron pipe ferrule for bore of pipe 15mm complete all as specified and directed.
M&L for repair to existing 15 mm bore bib tap/stop cock/Angle valve etc cast copper alloy chromium plated by replacing brass jumper assembly with spindle ,(brass Tee/elbow for MAP Qtr) PVC washer etc complete all as directed. Note : (i) Contractor or his authorised representative collect such type of complaints from B/R-I complaint cell at 9.00 AM on daily basis except sunday / Holiday. (ii) No extra payment shall be made on account of collection of complaint.
M&L for repair to existing 15 mm bore bib tap/stop cock etc cast copper alloy by replacing brass jumper assembly PVC washer etc matching with existing complete all as directed. Note : (i) Contractor or his authorised representative collect such type of complaints from B/R-1 complaint cell at 9.00 AM on daily basis except Sunday /Holiday. No extra payment shall be made on account of collection of complaint.
S&F in repairs 15mm bore stop valve or angle valve cast copper alloy, fancy type chromium plated, screwed down high pressure with capstan heads, screwed both ends for iron pipe or for union complete all as specified and directed.
S&F in repairs 15mm bore stop cock with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and directed.
S&F in repair CP wall mixture for hot & cold water screwed down for iron pipe and fixed bore of pipe 15 mm complete all as specified and directed.
S&F in repairs screwable plastic lid cover with frame fixed with screws, nut and bolts for existing 500 litre capacity rotational moulded polyethylene water storage tanks cylindrical vertical complete all as specified and as directed.
S&F in repairs screwable plastic lid cover with frame fixed with screws, nut and bolts for existing 1000 litre capacity rotational moulded polyethylene water storage tanks cylindrical vertical complete all as specified and as directed.
S&F in repairs waste fitting 32 mm bore, brass, chromium plated for glazed ware sink, basin with long screwed shanks and fly nuts, flange end bedded in red lead and other end fixed Complete all as specified.
S&F in repairs waste fitting 40 mm bore, brass, chromium plated for glazed ware sink, basin with long screwed shanks and fly nuts, flange end bedded in red lead and other end fixed complete all as specified.
S&F in repairs jet spray chromium plated brass for EWC with and including PVC connection 600 mm long and one CP socket 25 mm long suitable for 15 mm bore GI pipe complete all as specified and directed.
S&F in repairs jet spray PTMT for EWC with and including PVC connection 600 mm long and one CP socket 25 mm long suitable for 15 mm bore GI pipe with PTMT nut complete all as specified and directed.
S&F in repair health faucet chromium plated brass for EWC with & including 1.00 mtr long connection pipe and one CP socket 25 mm long suitable for 15 mm bore GI pipe complete all as specified and directed.
S&F in repair plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hanging device complete all as specified.
S&F in repair waste coupling of PTMT (half or full threaded) suitable for WHB/Sink bore of discharge pipe 32 mm (minimum weight 45 gms) complete all as specified and directed.
S&F in repair waste coupling of PTMT (half or full threaded) suitable for WHB/Sink bore of discharge pipe 40mm (minimum weight 60 gms) complete all as specified and directed.
S&F in repair 32mm dia PVC flexible waste pipe 80 cm long with socket for WHB/Urina/Sink complete all as specified
S&F in repair 40mm dia PVC flexible waste pipe 80 cm long with socket for WHB/Urina/Sink complete all as specified
S&F in repairs 15 mm bore angle valve chromium plated screwed down high pressure with capstan head screwed both end concealed type for iron pipe or for union complete all as specified and directed.
S&F in repairs 15 mm bore two way angle valve chromium plated screwed down high pressure with capstan head screwed both end for iron pipe or for union complete all as specified and directed.
S&F in repairs PVC flushing cistern low level 10 ltr cap with inlet ball valve float and handle syphonic action type incl brackets and flush pipe of polythene of low or high density ISI marked complete all as specified and directed.
S&F in repair vitreous china squatting pan of ORISSA patterns 'long pan' size 580m x 440mm white with 'P' or 'S' trap front of back inlet and foot rest including long band any pattern (excluding flushing cistern and flush pipe) including provision for lime concrete bedding complete all as specified and directed.
Dismantling or taking up or down PVC pipes and connection from wall/ceiling/floors etc of 15 mm bore complete all as specified and directed.
Dismantling or taking up or down PVC pipes and connection from wall/ceiling/floors etc of 20 mm bore complete all as specified and directed.
Cleaning & refixing old PVC pipe and connection in new or old position of wall, ceiling, floors etc & fitting extra union near stop, tank nipple and saddle pieces for 15 mm bore pipe complete all as specified and directed.
Cleaning & refixing old PVC pipe and connection in new or old position of wall, ceiling, floors etc & fitting extra union near stop, tank nipple and saddle pieces for 20 mm bore pipe complete all as specified and directed.
S&F 1216 (out side dia - 16mm) Polyethylene - aluminium Polyethylene (PE-AL-PE) composite pressure pipes including all crimp type internal sealing Plastic metal composite fittings (such as elbows, tees, reducers complete all as specified and directed.
S&F 1620 (Out side dia - 20mm) Polyethylene - Aluminium Polyethylene (PE-AL-PE) composite pressure pipes including all crimp type internal sealing Plastic metal composite fittings (such as elbows, tees, reducers complete all as specified and directed.
S&F in repairs WHB flat back of size 580mm x 450mm excluding taps waste chain plug stopper but incl brackets incl waste pipe cutting pinning in ends of brackets complete.
S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or incluidng fixing contilever brackets and connecting union to pipe over all size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl white sheet cover etc complete all as specified and directed.
Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15mm bore pipe.
Refixing old steel tubing and connection in new or old position (walls, ceiling, floor etc) bore of pipe in 15mm dia.
S&F tubes medium grade 'galvanised' iron with and including all fitting and fixed bore of 15mm dia complete to walls and ceiling or laid in floors.
Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm bore pipe.
Refixing old steel tubing and connection in new or old position (walls, ceiling, floor etc) bore of pipe in 20mm dia complete all as specified and directed.
S&F tubes medium grade 'galvanised' iron with and including all fitting and fixed bore of 20mm dia complete to walls and ceiling or laid in floors complete all as specified and directed.
Taking up or down steel tubing and connections including cleaning for refixing or removal to store 25mm bore pipe.
S&F tubes medium grade 'galvanised' iron with and including all fitting and fixed bore of 25mm dia complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repairs shower rose 125 mm size chromium plated with or without swivel joints including fixing to GI pipe or union complete all as specified and directed.
S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long fixed on wall with PVC rawl plugs & cadmium plated brass screws complete all as directed.
S&F in repairs glass corner shelf assembly 300mm long toughed glass minimum thickness of the 5.5 mm, with SS pipe railing fixed to wall by means of brass screws and raw plugs complete all as specified and directed.
S&F in repairs stainless steel peg stay of six nos fixed to wall by means of brass screws and raw plugs complete all as specified and directed.
Cutting chases pinning in, making good to facings where required and pointing in cement mortar 1:3 to end or edges of landings, steps cills, sunshades, shelves lintels, etc and cutting chases for concealed conduit wiring etc., and making goog , cutting exc 10 cm but n. exc 20 cm complete all as specified and directed.
S&F in repairs bottle trap of PTMT for wash hand basin having minimum water seal of 25 mm (Minimum weight 260 gms) and bore of discharge pipe 32 mm complete all as specified and directed.
S&F in repairs bottle trap of chromium plated for wash hand basin having minimum water seal of 25 mm and bore of discharge pipe 32 mm complete all as specified and directed.
Taking down shutter of any decription exc 1 Sqm and n. exc 2 Sqm each.
Taking down door chowkhats with shutter (without taking off shutters from frame) of area n exc 1.5 sqm each.
All as per item No 90.00 but area exc. 1.5 Sqm and n. exc. 4 Sqm each.
M&L 35mm thick factory made plain framed, panelled door shutters kiln seasoned & chemically treated second class hard wood (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I). The shutters shall be fitted to chowkhats complete all as specified and directed.
S&F 35mm thick 2nd class hard wood rail and style factory made glazed and skeleton door shutters,kiln seasoned and chemically treated second class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc complete all as specified and directedThe sizes of members of shutters as specified in SSR Part I. The shutters shall be fitted to chowkhats complete all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of out of MS tube for top & bottam rail MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style & plain colour PVC sheet for top rail, lock rail & bottam rail on either side & as gap insert for top rail & bottam rail, pannelling of plain colour PVC sheet fitted in MS frame welded sealed to the style & rail with suitable PVC sheet bedding & jointed togather with solvent cement in the frame at site as per specifaction & drawing complete all as specified and directed.
Taking down steel window/ventilators not exceeding 1.5 (without taking off shutter from frame including guard bars) any description.
Taking down Steel window/ventilators exceeding 1.5 sqm but not exc 4 Sqm (without taking off shutter from frame including guard bars) any description.
S&F extruded aluminum alloy with galavanisied mild steel hing pin butt hinges 100mm long.
S&F factory made steel window with side hung shutter and box type hinges steel handle and steel peg stay with glazing bars dovetailed or welded.
All as per item No 99.00 above but without glazing bars.
S&F factory made steel ventilator with top hung shutter with glazing bars including hings,steel peg stay etc complete.
S&F 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed.
S&F 150mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed.
S&F 300mm long mild steel sliding door bolt, bolt type, stove enamelled black,with bright bolt 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate, fitted to shutters complete.
S&F mild steel pressed steel handle,ovel type stove enameled black of size 150mm (ISI Marked)
S&F butt hinges, medium weight, cold rolled, mild steel,100mm long,fixed to angle iron chowkhats including welding complete.
S&F aluminium handles cast type anodized of size 125mm complete all as specified and directed.
S&F in repairs powder coated mild steel drapery rod of 20 mm inner dia (in lengths as directed) of approved colour with & including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
M&L framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or E-165.
S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintel hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps,plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples
All as per item No 112.00 above but fixed in repair.
M&L preparation to new or previously untreated wooden surface of any description,over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
M&L preparation to new or previously untreated steel surface of any description,over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chromate primer.
Hacking out old broken glass (any thickness size,quality or description)from wooden frames or stone, concrete or brick surroundings, glazed with putty or fixed with beads. Note:- Sheet/figured glass will be measured and paid separately under supply only.
Supply only sheet glass, ordinary quality,3mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and as directed.
Supply only sheet glass, ordinary quality,4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and as directed.
Supply only 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and as directed.
M&L PCC 1:3:6 type C-1 using 20mm graded aggregate 50mm thick as in plinth protection course surfaces finished even and smooth without using extra cement.
M&L for cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) 40mm thick in floor complete all as specified and as directed.
Supply only glass dividing strips 3 mm thick and 38 mm width complete all as specified and as directed.
M&L for 20 mm thick Granite (of any type) tiles machine cut, bedding and jointing with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing icluding 15mm thick screed bed in CM 1:6 complete all as specified and as directed
M&L for 20 mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointing with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 10mm thick rendering in CM 1:4 for recieving stone etccomplete all as specified and as directed
Taking down bib taps, stop cock, shower rose etc and removing blockages or air lock from GI/PVC tubing 15/20/25 mm dia by applying pressure through suitable pressure pumps/ using acid/chemical to clear any blockage and refixing bib tasp, stop cocks, shower rose etc. Note : (i) Contractor or his authorised representative collect such type of complaints from B/R - I complaint cell at 9.00 AM on daily basis except sunday /Holiday. No extra payment shall be made on account of collection of complaint.
M&L for running welding in repairs, thickness of metal to be welded not exc 6mm all as specified & directed.
M&L for running welding in repairs, thickness of metal to be welded exc 6mm but not exc 9mm all as specified & directed.
S&F in repair CI pipe sand cast 100 mm dia fixed to walls/or floors any length with or without ears with cement joints all as specified & directed
S&F in repair CI pipe sand cast 75 mm dia fixed to walls/or floors any length with or without ears with cement joints all as specified & directed.
S&F in repair CI branch pieces single equal or unequal ordinary or inverted or with oval access door paralled branch 100 mm bore complete all as specified and as directed.
S&F in repairs CI branch pieces single equal or unequal ordinary or inverted or with oval access door paralled branch 75 mm bore complete all as specified and as directed.
S&F in repairs of CI bend of any radious, diminishing piece or tapers (Larger bore measured) 75 mm bore complete all as specified and as directed.
S&F in repairs of CI bend of any radious, diminishing piece or tapers (Larger bore measured) 100 mm bore complete all as specified and as directed.
S&F in repairs cast iron nahani trap 75 mm bore jointing to waste pipe fixed in cement concrete type B-1, 1:2:4 complete all as specified and as directed.
S&F in repairs Cast iron 'P' or 'S' trap 100 mm bore of pipe in cement concrete type B-1, 1:2:4 complete all as specified and as directed.
S&F in repairs PVC (SWR) 'P' trap 110/110 mm bore complete all as specified and as directed.
S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe complete all as specified and as directed.
S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 75mm pipe complete all as specified and as directed.
S&F in repairs PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors of 110mm pipe complete all as specified and as directed.
S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 110mm pipe complete all as specified and as directed.
S&F in repair PVC (SWR) bend 75mm bore of any radius with access door complete all as specified and as directed.
S&F in repair PVC (SWR) junction single (single T) of 110 mm bore with access door complete all as specified and directed.
S&F in repair PVC (SWR) branch piece single (Single Y) of 75 mm bore equal or unequal complete all as specified and as directed.
S&F in repair PVC (SWR) bend 110 mm bore of any radius complete all as specified and directed.
S&F in repairs PVC (SWR) bend 75 mm bore of any radius complete all as specified and directed.
S&F in repairs PVC (SWR) vent cowl of 110mm bore complete all as specified and directed.
S&F in repairs PVC (SWR) floor trap with grating inclu jointing with solvent with cement of 75 mm bore complete all as specified and directed.
S&F PVC (SWR) gully trap 125/110mm, setting and jointed with solvent cement complete all as specified and directed.
S&F in repairs MS clamps fixed to walls on both sides of pipes with plastic raw plugs and 50mm size steel screws complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) all as specified & as directed.
M&L for reinforcement cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate in slabs supported on walls beams and columns in floors, roofs, shelves and like complete all as specified and directed.
Form work to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exc 200 mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.
Formwork to edges of concrete flats, roofs, floor slabs, landings and similar work, not exc 200 mm thick (Horizontal or sloping) for rough finished flat surfaces of conccrete complete all as specified and directed.
M&L for reinforcement TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.
M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in cills, coping steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm ht kneeler kerb and alike including weathering, slightly rounded or chemfered angle and throating complete all as specified and directed.
M&L cement concrete 75mm thick 1:4:8 type D-2 using 40mm graded aggregate as in sub base of floors complete all as specified and directed.
M&L for interlocking tiles 60mm thick (M-35) having compressive strength not less than 35N/MM2 with grey cement and pigment laid over with and icluding on 25 mm thick sand layer all as specified and directed.
M&L precast kerb stone built in PCC Type B1, 1:2:4 using 20mm graded stone aggregate and fixing in CM 1:4 all as specified and directed.
Providing sand stone 5cm thick as in sun shed , chajjas, shelves etc set and pointed in cement mortar 1:4 complete all as specified.
Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacity exc 250 but not exc 500 ltr capacity complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipe etc of capacity exc 500 but not exc 1000 ltr capacity complete all as specified and directed.
Fixing only rotational moulded polythylene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position capacity of tank in 500 ltrs complete all as specified and directed.
Fixing only rotational moulded polythylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position capacity of tank in 1000 ltrs complete all as specified and directed.
Taking down old CP wall mixture for hot & cold water screwed down for iron pipe and fixed bore of pipe 15 mm and refixing after replacing brass jumper assembly with spindle washers etc complete all as specified and directed.
Treatment for sunken portion is as follows:- M&L for water proofing treatment in sunken floors as described hereunder :- 1) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. 2) PCC (1:2:4) type B0, covered filling in sunken portion 75mm thickness shall be provided at the junctions of RCC slab and adjoining walls. 3) Sunken floor and sides upto finished floor level shall be plastered with 15mm thick plaster in CM 1:4 wixed with WPC@ 3% by weight of cement. 4) Applying bitumen primer of sunken floor & side surfaces TANKMASTIC of M/s STP Ltd @ 0.40 ltr/Sqm. 5) Sunken portion shall be filled with lean concrete (1:5:10), Type E-2 using 40mm aggregate after carring out of satisfactory testing of CIpipes/Joints & Slab/walls by filling water 72 hrs. The sunken portion of Nahani trap/floor trap and pipes, joints shall be emmbeded in PCC (1:3:6) blocks 6) GI Spout pipe 32mm dia and 450mm long cross cutted ends shall be inserted at the time of repair to Sunken portion as directed. Note:- i) In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. This process of grouting and testing shall be repeated till leakage/seapage/dampness is elimaneted ii) Horizontal flat area only measured. iii) Above aspets are deemed to be included in quoted rate.
Cutting holes in brick walls exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar etc for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B1 complete all as specified and directed.
Cutting holes in brick walls not exc half brick built in cement mortar or cement lime mortar and stone walls built in lime mortar etc for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B1 complete all as specified and directed.
GAR CONSTRUCTIONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .