Construction of Veterinary Hospital building at Khajjiar District Chamba. (SH Construction of building portion including W.S and S.I , Rain water harvesting system, Septic Tank and Site development).

Amount

Cutting in earth work in all height and depth in all kinds of soils including saturated soil comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soil including dewatering wherever required, setting out true to the required lines, grades, width, cutting, side slopes, trimming of bottom and levels as shown in the drawings and as directed by the Engineer-in-charge at site, according to the HPPWD specification and sorting of useful and un-useful material for filling in roadway, embankments for grade improvement and leveling to the required grades and then disposing of all excavated material in acquired width of the road or on approved dumping sites through all modes of transportation including head load, animal loads or mechanical means along with its leveling and fine dressing and carriage of all labour, machinery, materials, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and /or by labour (if any required complete as per specification, drawing, design and as per the direction of the Engineer-in-charge.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping site including its stacking leveling dressing including all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing including all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST and other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone agreegate 40 mm (forty millimetre) nominal size) curing complete excluding the cost of form work in all work up to plinth level including carriage of material, within all leads, lifts and other incidentals as per the direction of the Engineer-in-charge and as per specification, approved Drawing & Design complete. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in foundation, footing, basis of columns etcetra and mass concrete including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landing including carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all width and heights including carriage of material and other incidentals within all leads and lifts and as per the direction of the Engineer-in-charge. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work, in all work up to plinth level using minimum cement content not less than 360 KG/Cum (Three hundred sixty kilogram per cubic metre) including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Providing and laying in position machine batched and machine mixed design mix M-25 ( Twenty five) grade cement concrete for reinforced cement concrete work, in all work above plinth level up to floor V level using minimum cement content not less than 360 KG/Cum (Three hundred sixty kilogram per cubic metre) including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Steel reinforcement Thermo-Mechanical treated bars of grade Fe-500 of TATA Tiscon/Sail including straightening, cutting, bending, placing in position and binding all complete upto plinth level as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed & vibrated cement concrete 1:1.5:3 (one cement isto one poit five sand isto three graded crushed stone aggregate 20 mm (twenty millimetre) nominal size) to obtain the minimum compressive strength of grade M-20 (M- twenty) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landing, shelves and their support, balconies, beams, girders, bressumers and cantilever upto floor all levels .

Providing and laying mechanically mixed and vibrated plain cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone agreegate 20 mm (forty millimetre) nominal size) excluding the cost of form work in foudation and plinth within all leads and lifts and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone agreegate 20 mm (forty millimetre) nominal size) excluding the cost of form work in foudation and plinth within all leads and lifts and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed & vibrated cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20 mm (twenty millimetre) nominal size) to obtain the minimum compressive strength of grade M-25 (M- twenty five) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in stair cases and connected work within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone agreegate 40 mm (forty millimetre) nominal size) curing complete excluding the cost of form work in all work up to plinth level including carriage of material, within all leads, lifts and other incidentals as per the direction of the Engineer-in-charge and as per specification, approved Drawing & Design complete. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Back filling behind abutments, return walls, wing walls and retaining walls etcetra complete as per drawings and MORD technical specification section 1200 and 1600 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing 100mm (Hundred millimeter) diametre PVC pipe Weep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing walls return walls and retaining /breast walls etcetra, extending through the full width of the structure with slope of 1 (V) : 20 (H) (one vertical is to twenty horizontal ) towards drawing face complete as per drawings and MORD technical specifications section 700 & 1200 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including the octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in superstructure above plinth level up to floor V( five) level with rat and trap bond in all shapes and sizes in Cement mortar 1:6 ( one cement isto six oarse sand) complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 ( seven point five) in superstructure above plinth level up to floor V (five) level in all shapes and sizes in Cement mortar 1:4 ( one cement isto four coarse sand) complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Square rubble masonry coursed with hard stone of approved quality in cement mortor 1:6 ( one cement isto six sand) including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:3 (one cement is to three sand) curing complete including all taxes and carriage of material, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth including raking out joints in cement mortar 1:5 (one cement is to five sand) curing complete including carriage of material, within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Stone soling dry hand packed tightly under floor complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and other taxes imposed by the Government.

Supplying & placing of stone aggregates 40 to 75 mm ( forty to seventy five millimetre) nominal size complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and other taxes imposed by the Government.

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, ( thirty five into thirty five into five millimetre) joints mitred and welded by angle iron 35x35x5 mm ( thirty five into thirty five into five millimetre) or 35x 5 mm ( thirty five into five millimetre) or ISLC 75 x 40 ( seventy five into forty millimetre) flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-in-charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 40mm (forty millimetre) thick 2nd class deodar wood half glazed and half panelled shutter with double glass with rubber gasket in window shutter including bright finished black enamelled iron hinges as per specifications as per the direction of the engineer-in-charge, and drawing & design complete including all taxes and carriage of material within all leads and lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 35 mm ( thirty five millimetre) thick ISI marked flush door shutters including ISI marked Stainless Steel butt hinges with necessary screws conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters as per the direction of the engineer-in-charge, and drawing & design complete including carriage of material within all leads and lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 40 mm (forty millimetre) thick second class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G(eighty five G) with wire of dia 0.56 mm (zero point five six millimetre) for doors, windows and clerestory windows including with necessary screws complete including all taxes and carriage of materials within all leads, lifts as per specification as per the direction of the Engineer-in-charge and other incidentals and drawing & design complete including carriage of material within all leads and lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing angle iron cupboard frames manufactured from M.S.Angle iron section 25X25X5mm (twenty five into twenty five into twenty five millimeter) thickness including hinges jamb, lock jamb, beed and if required angle thrashold of mild steel angle 25X25 mm (twenty five into twenty five millimeter) welded or rigidly fixed by mechanical eans ,lugs with split end tails to each jamb including steel butt hinges 2.5 mm (two point five millimeter) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge and drawing & design complete including carriage of material within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (nineteen millimetre) thick water proof termite resistant ISI marked IS No. 1659 of uniply/green ply commercial board in shelves/box for cupboard/ cabinets with butt joints and fixing with nails and screws etcetra complete. All cut portion of the board shall be finished with the 6mm/12mm ( six milimetre/twelve milimetre) thick hard wood edging as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, Sale tax, GST or any other taxes imposed by the Government .

Providing and fixing 19mm (nineteen millimetre) thick commercial board water proof termite resistant shutters of ISI marked 1659 of uniply/green ply for cup boards including fixing with nickel plated piano hinges with screws etcetera complete as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government .

Providing and fixing M.S. plain grills made of M.S. square bars welded to 6mm x12mm MS flat distance between should not be more than 150mm centre to centre of total grill should be to windows frame with screws including all taxes and carriage of materials within all leads, lifts as per specification as per the direction of the Engineer-in-charge and other incidentals. The rate is including octroi, royality, Malkana, toll tax, Sale tax, GST or any other taxes imposed by the Government .

Providing and fixing 300 x 16 mm ( three hundred into sixteen millimetre) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra complete. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 250 x 16 mm ( Two hundred fifty into sixteen millimetre) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra complete. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 200 x 10 mm ( Two hundred into ten millimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150 x 10 mm (One hundred fifty into ten millimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 100 mm (one hundred millimetre) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 250 mm ( two hundred millimetre ) aluminium hooks and eyes ncluding necessary cutting and making good etcetra complete. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeter) oxidized M.S. hasps and stapples (safety type) with necessary screws etc. complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing bright finished brass ball catcher 10 mm (ten millimeter) dia including carriage of material within all leads and lifts and as per HP.PWD., specifications of 1990 volume-I and as per direction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying antiskid Ceramic floor tiles of size 300x300 mm ( Three hundred into three hundred millimetre) (thickness to be specified by the manufacturer), of premium quality of NITKO/AGL/RAK/SIMPOLO /KAZARIA/SOMANY/ as per approved shade laid on 20 mm ( twenty millimetre) thick bed of cement mortar 1:4 ( one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram per square metre) including pointing the joints with white cement and matching pigments etcetra, complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

White glazed tiles of NITCO/ Orient bell 6mm (six millimetre) thick and size of 30x45 cm. (Thirty into forty five centimetre) of orinet, bell/ NITCO in skirting risers of steps and dado 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry including carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-Charge and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying Mirror polished Kota stone slab flooring of size 55x55 cm (fifty five into fifty five centimeter).20 mm (twenty millimeter) (average) thick base of cement mortor 1:4 (one cement isto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete 25 mm (twenty five millimeter) thick including carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-Charge and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying Kota stone slab (mirror polished) 25 mm (twenty five millimeter) thick in risers of steps,skirting dado and pillars laid on 12 mm (twelve millimeter) (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete including carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-Charge and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and laying 20mm. (twenty millimeter) thick granite stone (Table rubbed and polished) in flooring laid over cement mortar 1:3 (One cement isto three sand) including jointing with cement mortar 1:2(One white cement isto two marble dust) with an admixure of pigment to match the shade of the marble complete including carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-Charge and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing Uni-stone 12mm (twelve millimetre) cladding on RCC surface side as on faces of Arch masonary walls etcetera on 12mm (twelve millimetre) thick cement plaster 1:3 (one cement isto three sand) and jointed with cement slurry including scaffolding etcetera complete including all taxes, carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five micron) primer coating and back coat of polyster of 5 microns (five micron) over 5 microns (five micron) primer coating of TATA Durashine / SAIL/ RELIANCE/ ZINDAL STEEL including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required including carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing ridges or hips 60cm (sixty centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five microns) primer coating and back coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating of TATA Durashine / SAIL/ RELIANCE/ ZINDAL STEELincluding fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing valleys 90cm (ninety centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty microns) over 5 microns (five microns) primer coating and back coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm(six millimetre) dia metre with prepainted limpet washers complete with all accesories as required as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150 mm ( one hundred fifty millimetre diametre) on wall face unplasticised Rigid single socketed PVC rain water pipes of Supreme/ Finolex/ Prince conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150 mm ( one hundred fifty millimetre) dia PVC bend of Supreme/ Finolex/ Prince make on wall face unplasticised for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 110 mm dia (one hundred ten millimetre) PVC shoe of Supreme/ Finolex/ Prince make on wall face unplasticised for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 100 mm dia (one hundred ten millimetre diametre) PVC clamps of Supreme/Finolex of approved design to unplasticised - PVC rain water pipes by means of 10x10x10 ( ten into ten into ten millimetre) mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 ( one cement isto four coarse sand) and making good the wall etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. B.P. sheet 2 mm ( two milimetre ) thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 25 x 30 cm ( twenty five into thirty centimetre) wide, 45 cm ( forty five centimetre) overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm ( forty into three millimetre) size, bolts, nuts and washers etcetera including making necessary connections with rain water pipes complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Steel work rivetted, bolted or welded in built up section, of Tata/Sail trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the direction of Engineer-In-charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. Hollow pipe railing having baluster in 40mm (forty millimetre) dia @ 30cm. (thirty centimetre) Centre to centre and 50mm dia M.S. Hollow D pipe hand rail with round ends connecting with 25mm dia bends as per Arch. Drawing No. 33 of Job 7704 including all taxes, carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm (twenty into ten into two millimeter) and braced with flat iron diagonals 20 mm X5 mm (twenty into five millimeter) size with top and bottom rails of T.iron 40 mm X40 mm X6 mm (forty into forty into six millimeter) with 38 mm (thirty eight millimeter) dia steel pulley complete with bolts and nuts locking arrangements, stoppers, handles,including applying a priming coat of red lead paint including carriage of material within all leads and lifts and as per HP.PWD., specifications. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Applying priming coat With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome.over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete including carriage of material within all leads and lifts and as per HP.PWD., specifications. The rate is including octroi, royality, Malkana, toll tax, GThe rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Applying Birla white/J.K wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Distempering two or more coats with sythetic / Acrylic washable distemper Asian / Dulex of approved shade and manufacture and of required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and including preparing the surface even and sand papered smooth as per the directions of the Engineer-in-charge including all taxes, carriage of material within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces.one coat complete including carriage of material within all leads and lifts and as per HP.PWD., specifications. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Finishing walls with Apex weather proof exterior grade emulsion of Asian paint or exterior emulsion of NAROLAC SURKSHA as per approved shade on undecorated wall surface (two or more coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etcetra including sand paper smooth complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Applying priming coat of over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Painting two and more coats of Asian/Nerolac (excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than whiteas directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Painting two or more coat (excluding priming coat) on new steel and other metal surfaces with ready mixed paint of Asian paint /Nerolac brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with enamled paint other than white as per approved specification or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

6mm (six millimetre) thick cement plaster in ceiling with cement mortar 1:3 ( one cement isto three sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) cement plaster in single coat on fair side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:5 (one cement isto FIVE sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) cement plaster in single coat on rough side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster in single coat on rough side of brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:3 (one cement isto three sand)as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing under layer for plinth protection of 75 mm (seventy five millimetre) thick (unconsolidated) bed of dry brick / stone agreegate 40 mm (forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing plinth protection 50 mm (fifty millimetre) thick in cement concrete 1:3:6 (one cement isto three sand isto six graded stone agreegate 20 mm(twenty millimetre) nominal size) within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15 X 23 cm (fifteen into twenty three centimetre) in cement mortar 1:6 (one cement isto six sand) and inside plastering with cement mortar 1:3 (one cement isto three sand) including earth work and laying 10 cm (ten centimetre) cement concrete in 1:5:10 (one cement isto five sand isto ten graded stone agreegate 40 mm (foty millimetre) nominal size) and 7.5 cm (seven point five centimetre) cement concrete 1:2:4 (one cement isto two sand isto four graded stone agreegate 20 mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.

Providing and laying 60mm thick factory made cement concrete interlocking paver block with border or kerb block of M-40(M-forty) grade made by block making machine with strong vibratory compaction, of approved s;ze, design & shape, laid in required colour and pattern over and including 50mm ( fifty millimetre) thick compacted bed of coarse sand, filling the joints with fine sand etcetra all complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) nominal bore G.I. pipe complete with G.I. fitting and clamps including cutting and making good the walls etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 15mm ( fifteen millimetre) nominal bore G.I. pipe complete with G.I. fitting including trenching and refilling etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Providing and fixing 1620(Sixteen hundred twenty) (20 mm OD (twenty millimetreouter Diametre) Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra, with clamps at 1.00 (one metre) spacing. This includes the costs of cutting chases and including testing of joints Concealed work, including cutting chases and making good the wall etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing water closet squatting white Vitreous china Orissa pattern W.C. pan No. 20090 of size 53 x 41 cm (Fifty three into forty one centimetre) of Hindware/Cera/Jaquar with integral type foot rests (Indian type W.C. pan ) with 100 mm( one hundred millimetre) sand cast Iron P or S trap, 10 litre (ten litre) low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) No. 20092 of size 61.5 x 34.5 x 40 cm (Sixty one point five into thirty four point five into forty centimetre) of Hindware / Cera /jaquar with seat and lid, 10 ( ten) litres low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever) conforming to IS: 7231 with all fitting and fixtures complete including cutting and making good the walls and floor wherever required. WC pan with ISI marked white solid plastic seat and lid. complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing White vitreous China wash basin garnet No. 10080 of size 58 x 43 cm ( fifty eight into forty three centimetre) under counter basin of Hindware/Cera / jaquar of star white/ snow white shade with a single hole with CI bracket, 15mm ( fifteen millimetre) CP brass pillar tap, 32mm ( thirty two millimetre) CP brass waste of heavy duty make of ISI marked IS No. 8931 & 8934 standard pattern fitting including painting of fitting and brackets, cutting and making good the walls wherever required as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous China pedestal of Hindware/Cera/jaquar for wash basin complete recessed at the back for wash basin complete recessed at the back for the reception of pipes and fittings as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 8mm ( eight millimetre) dia CP/SS Jet with flexible tube upto 1.00 (one ) metre long with SS triangular plate to european type W.C. of quality and make as approved by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass waste of 32mm (thirty two millimetre) dia size for sink or wash basin as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Providing and fixing 100 mm ( one hundred millimetre) dia CP brass grating for gully trap of heavy duty makes ISI marked IS No. 8931 & 8934 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Providing and fixing 600mm X 450 mm (six hundred millimetre into four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm (six millimetre)thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x120x5mm (six hundred into one hundred twenty into five millimetre) glass shelf of Hindware/ Cera/ jaquar with edges round off supported on anodized aluminium angle frame with C.P. brass brackets and gaurd rail complete fixed with 40mm (forty millimetre) long screws rawl plugs etcetra complete. as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm dia ( one hundred ten millimetre) rigid high pressure PVC spigot and socketed soil waste and ventilating pipes of Finolex/ Supreme/Prince conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 75 mm dia ( seventy five millimetre) rigid high pressure PVC spigot and socketed soil waste and ventilating pipes of Finolex/ Supreme/Prince co conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC 110x90mm (one hundred ten into ninety millimetre) dia floor trap of Finolex /Supreme/Prince ISI Marked of self cleaning design including fixing with approved adhsive, cost of cutting making the walls and floors etcetra complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC single equal branch of Finolex /Supreme/Prince plain ISI marked including fixing with approved adhesive 150 mm (one hundred ten millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing PVC single equal branch plain of Finolex /Supreme/Prince ISI marked including fixing with approved adhesive 75 mm ( seventy five millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm ( one hundred fifty millimetre) dia PVC door bend with oval access door, insertion rubber washer 3mm ( three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 75 mm ( seventy five millimetre) dia PVC door bend with oval access door, insertion rubber washer 3mm ( three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Providing and fixing 600 x 20 mm ( six hundred into twenty millimetre) CP brass towel rail of continentel series of jaquar/Contessa plus series of Hindware/Ocean series of Cera complete with C.P brass bracket fixed to wooden plugs with CP brass screws as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Making connection of galvanised steel distribution branch with galvanised mild steel main 20 mm to 40 mm (twenty millimetre to forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Providing and fixing 15mm ( fifteen millimetre) nominal bore C.P. brass bib cock makes of continental series of Jaquar/Contessa series of Hindware/ ocean series of Cera or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) nominal bore C.P. brass stop cock (concealed) of (heavy duty) makes of continental series of Jaquar/ Contessa series of Hindware/ ocean series of Cera ISI marked IS No. 8931 & 8934 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) nominal bore ball valve (brass) of approved quality High or low pressure with plastic floats complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal bore unplasticised PVC connection pipe of Finolex/ Prince with brass union complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene 1000 litre (one thousand) water storage tank of Syntex/Finolex/Prince four layer with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but woithout fitting and base support for tank complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government .

Providing and fixing 15mm (fifteen millimetre) nominal bore CP brass angle valve for basin mixer and geyser points of (heavy duty) makes of continental series of Jaquar/ Contessa series of Hindware/ ocean series of Cera ISI marked IS No. 8931 & 8934 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing stainless steel Kitchen sink of Diamond/ Unik with drain board 510mmx 1040mm ( five hundred ten millimetre into one thousand forty millimetre) bowl depth 250mm ( two hundred fifty millimetre) of ISI 304 (18/8) as per IS: 13983 with CI brackets and stainless steel plug 40mm( forty millimetre) including painting of fitting and brackets, cutting and making good the walls wherever required or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Constructing brick masonary chamber for underground C.I ( cast iron) inspection chambers and bends with common burnt clay building bricks in cement mortar 1:5 ( one cement is to five sand) including cover with frame (light duty) size 455mm x 610 mm ( four hundred fifty five into six hundred ten millimetre) internal diamension total weight of cover with frmae to be not less than 38 KG ( thirty eight kilogram) ( weight of cover 23 kg and weight of frame 15 kg) RCC top slab with 1:2:4 mix foundation concrete 1:5:10 inside plaster 15 mm thick with cement mortar 1:3 ( one cement isto three with a floating coat of neat cement on walls and bed concrete etctera complete as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government .

Excavating trenches of required width for pipes, cables, etcetra including excavation for sockets, dressing of sides, ramming of bottom, depth upto 1.5( one point five) metre including getting out the excavated soil and then returning the soil as required in layers not exceeding 20cm ( twenty centimetre) in depth including consolidating each deposited layer by ramming, watering etcetera and disposing of surplus excavated soil as directed within a lead of 50 ( fifty) metres Pipes and cables exceeding 80mm ( eighty millimetre) dia but not exceeding 300mm ( three hundred millimetre) diametre or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST and any other taxes imposed by the Government .

Providing and fixing PVC Cowl 100 mm (one hundred millimetre) nominal diametre including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

Providing and fixing on wall faces PVC (D-plast) 150mm (one hundred fifty millimetre) diametre PVC plain bend of Supreme/FINOLEX for rain water pipes including filling the joints with approved adhesive complete as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC Collar of supreme/finolex make 150 mm (one hundred sixty millimetre) diametre including fixing with approved adhesive and as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government .

Providing 200 mm (two hundred millimetre) wide cast iron rungs with chequred or rubber non slip surface including fixing in man hole with 200 X 200 X 100 mm (two hundred into two hundred into one hundred millimetre) cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggreegate 20 mm (twenty millimetre) nominal size as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, Sale tax,GST or any other taxes imposed by the Government.

Supplying and fixing of cast iron medium duty 500 mm (five hundred millimetre) diametre cast iron cover with frame weight 38 Kg. ( thirty eight kilograme) as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government .

Providing and fixing C.P. brass full way valve with wheel of ISI marked IS NO. 8934 of Ess Ess/Jaquar 15mm (fifteen millimetre) nominal bore as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government .

Providing and fixing on wall faces PVC (D-plast) 110mm dia (one hundred ten millimetre ) diametre rain water pipes working pressure not less than 4.5 Kg /sqcm(four point five ) kilogram per square centimetre as per ISI Marked of FINOLEX/Supreme including filling the joints with approved adhesive complete as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government .

Providing and fixing on wall faces PVC (D-plast) 110mm (one hundred ten) diametre PVC plain bend of FINOLEX/ VECTUS/Supreme for rain water pipes including filling the joints with approved adhesive complete as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing in position water lifting pump (toollu pump) having 3.00 ( three) horse power capacity of Kirloskar/crompton or equivilent make ISI mark including all necessary fitting required at site complete in all respect as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST and any other taxes imposed by the Government.

KUSH KATOCH