8499 PERIODICAL SERVICES AND MISC B/R WORKS TO CERTAIN OTM ACCN IN ZONE A AREA OF AGE B/R-II UNDER GE (CENTRAL) PUNE

Amount

Dismantling Wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets.all as directed.

S & F aluminium powder coated snap grid framed work of size 600mm x 600mm for false ceiling and including suspended hangers 4mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long with including 8mm thick one side prelaminated Gypsum ceiling board of as approved including applying tree coats of white wash complete with following aluminium anodised sections :- (a) Main and cross Tee shall be of size 36.5mm x 23.5mm x 1.5mm thick and 23.5mm x 23.5mm x 1.28mm thick respectively and jointed at junction/crossing with aluminium anodised angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg/RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium anodised angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg/RM. (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling.

S & F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantiling of old sheets as in roofing /cladding as specified and directed.

S & F Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, bent to shape as required and directed fixed with self tapping screws including dismantling of old of sheets in roofing / cladding as specified and directed.

S & F Fibre glass reinforced translucent sheet fixed with coach screw and washer in roof / wall cladding etc including dismantling of old sheets as in roofing / cladding complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking of shutters from the frame) area not exc 1.50 Sqm & making good disturbed portion in cement mortar 1:3 or cement concrete 1:3:6 Type C-1 & removing from site all as directed.

Taking down Chowkats or frames with shutters (without taking of shutters from the frame) exc 1.50 Sqm but not exc 4.00 Sqm & making good disturbed portion in cement mortar 1:3 or cement concrete 1:3:6 Type C-1 & removing from site all as directed.

Taking down shutter of any description and removing frome site area not exc 1.00 Sqm but in each leaf & removing from site all as directed..

Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 Sqm in each leaf & removing from site all as directed..

Taking down shutter of any description area exc 2.00 Sqm but not exc 4.00 Sqm in each leaf & removing from site all as directed.

S & F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete, as specified and as directed.

S & F pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete, as specified and as directed.

S & F powder coated aluminium window shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter with using aluminium sections weighing not less than 0.55 Kg/Mtr etc complete with inclusive of necessary hardware i.e. locking mechanism, handle and 4.8mm thick selcted quality sheet glass for glazing and stainless steel wire cloth 0.71mm dia with width of aperture 1.18mm including glazing clips / necessary gasket / neoprene / rubber packing / rubber beading etc complete all as specified and directed. (Note :- Rates quoted by tenderer shall demmed to be inclusive of Glass pane & stainless steel wire cloth .)

S & F 30mm thick flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping / frame to match complete all as specified and directed.

Supply and fix (Factory Made) 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S & F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 180 of SSR 2004 Part-II complete all as specified and directed.

S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 176 of SSR 2020 part II. The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part-II complete all as specified and directed.

S & F anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S & F anodised powder coated aluminium door shutters (single / double leaf) or partitions, aluminium section weighing 0.55kg/Mtr including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges 3 Nos, anodised aluminium snap beading, screws etc complete all as specified and as directed. (Note :- Rates quoted by tenderer shall demmed to be inclusive of Glass pane & stainless steel wire cloth .)

S & F louvers glass ventillators with partially guaged shutter using 5mm thick x 10cm wide frosted glass strips with following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc complete all as specified and as directed. (a) SP 20048 (b) Glazing clips 19352

S & F 100mm long mild steel but hinges medium weight cold rolled complete all as specified and as directed.

Supply and fix 150mm long extruded aluminium alloy powder coated handles, fabricated type complete all as specified and as directed.

S & F 150mm long Aluminium alloy powder coated barrel tower bolt of extruded section complete all as specified and as directed.

S & F 250mm long Aluminium alloy powder coated sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminioum alloy complete all as specified and as directed.

S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S & F in repair Door closer Aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and directed.

Supply and fix 4.0 mm thick figured / frosted glass, pin head type , ordinary quality sheet glass and glazing with aluminium glazing clip in aluminium window shutter area not exc 0.50 Sqm in each pane including when ordered for fins of louvered ventilators etc complete all as specified and directed

Supply and fix in repairs 25mm dia decorative type curtain rod , stainless steel, with not less than 1.00mm wall thickness complete all as specified and directed.

Supply and fix decorative type brackets , stainless steel, suitable for above curtain rod complete all as specified and directed.

S & F in repair 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in shutter / shelves of cup boards complete and edges leeped with 6m thick teak wood lipping strips with nails etc including dismantling of boarding, any description fixed in any position with nails i.e. in cupboard shutters, partitions and wall lining etc and similar position fixed with screws complete all as specified and directed.

S & F in repair magnetic catcher for cabinet shutters with fixing arrangement complete all as specified and as directed.

S & F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps (when open) 30mm all as specified and directed.

M & L for 10mm thick rendering on fair faces of brick work or concrete or surfaces in CM 1:6 finished the surface even and smooth with thin layer of sagol finish including taking down old cement plaster including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M & L 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface even and smooth without extra cement including taking down cement plaster including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer of same make complete all as specified and directed.

M & L for preparing new plastered surface of walls and applying two coats of cement based paint over a coat of cement primer of same make complete all as specified and directed.

Complete removal of existing treatment of walls and applying two coats of oil bound distemper over one coat of alkali resistance primer over & including thin layer coat of wall care putty complete all as specified and as directed.

M & L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

M & L for preparing old plastered or unplastered surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed.

M & L for preparing old plastered or unplastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed.

M & L for preparing old plastered or unplastered surface of walls and applying one coat of cement based paint complete all as specified and directed.

M & L for preparation of old plastered or unplastered surfaces of wall / Ceiling by brooming / wire brushing / removal of loose scales / dusts / unwanted particles manually / mechaincally and applying one coat of white wash complete all as specified and directed.

Supply and fixed in repair 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gm complete as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones all as specified and directed.

S & F sheet glass 3mm thick ordinary quality glazing with oil putty in squares area not exc 0.50 Sqm in each pane all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises out side of defence land complete all as directed.

Dismantling of stone slabs and tiles of any description laid in CM in floors, approns etc complete all as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete alll as directed.

M & L 25mm thick cement concrete type B-1, 1:2:4 using 20mm graded stoned aggregate as in levelling course complete all as specified and directed.

Material and labour for Joint free Non skid coloured ceramic tiles of size 600mm x 600mm x 7 to 8mm thick, Matt Finished (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed.

All as per item No 53 above but in vertical surfaces / skirting including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Material and labour for Joint free Non skid coloured ceramic tiles of size 300mm x 300mm x 7 to 8mm thick, Matt Finished (Square / rectangular) over & including 15mm thick screed bed in CM 1:6 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as directed and specified.

M & L for colored glazed ceramic tiles of size 300mm x 450mm x 7 to 8mm thick (Matt Finish) on vertical surfaces set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.

M & L 20-25mm thick Machine cut cudappah stone slab over and including cement screed bed, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab ncluding rubbing and polishing complete all as specified and as directed.

S & F in repair vitreous China wash down water closet (pedestal pattern), white with including cast iron 'P' or 'S' trap and connection to trap and wall hung cistern with drainage pipe and connection to trap, seat cover and including making good to floor, complete all as specified and as directed. Make :- Jaquar Cat part No: CNS-WHT-551SNPP184LZ or equivalent model in KOHLER and ROCA.

S & F in repair Vitreous China urinals, half stall (back or corner wall type) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe including urinal spreader, bottle trap/waste pipe complete all as specified and as directed. Make :- Jaquar Cat part No : URS-WHT-13253N or equivalent model in KOHLER and ROCA.

S & F in repair 15mm bore chromium plated fancy type auto closing concealed urinal flush valve with wall flange complete all as specified and as directed. Make :- Jaquar Cat part No:PRS-CHR-073 or equivalent model in KOHLER and ROCA.

S & F in repair health faucet (ABS Body) chromium plated suitable for 15mm dia pipe with 1.25 Metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. Make :- Jaquar Cat part No:ALD-CHR-577 or equivalent model in KOHLER and ROCA.

Supply and fix 75mm bore dia out let PVC (SWR) floor trap , plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repairs 15mm bore dia bib taps cast copper alloy with crutch or butterfly handle, chromium plated , fancy type screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make :- Jaquar Cat part No:FLR-5047N or equivalent model in KOHLER and ROCA.

S & F in repairs for 15mm bore dia angle cock copper alloy chromium plated , fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed .Make :- Jaquar Cat part No : FLR-5053N or equivalent model in KOHLER and ROCA.

S & F in repair Brass chromium plated wall mixer (2-in-1) for mixing hot & cold water screwed down for iron pipe with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange and fixed complete all as specified and directed. Make :- Jaquar Cat part No : FLR-5281N or equivalent model in KOHLER and ROCA.

S & F in repair 100mm round shape brass chromium plated overhead shower, single flow with rubit cleaining system fitted to steel pipe or union complete all as specified and directed. Make :- Jaquar Cat part No : OHS-1989 or equivalent model in KOHLER and ROCA.

S & F in repairs PVC connections 15mm size with PTMT nuts to length 450mm all as specified and directed.

Supply and fix in repairs 15mm bore dia pillar taps, cast copper with capstan head, chromium plated, screwed down high pressure with or without lettered 'hot' and 'cold' with long screwed shank and fly nut for iron pipe complete all as specified and directed. Make :- Jaquar Cat part No : FLR-5015 or equivalent model in KOHLER and ROCA.

S & F in repairs 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required complete all as specified and directed.

M & L for GI tubing 15mm bore dia medium grade including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors complete including taking up or down old tubing complete all as specified and as directed.

M & L for GI tubing 20mm bore dia medium grade including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors complete including taking up or down old tubing complete all as specified and as directed.

S & F in repair 20mm bore dia Gun metal globe or gate valves ISI marked with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S & F 500 Litre capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

S & F 1000 Litre capacity Rotational moulded polyethelene water storage tanks (cylindrical, vertical with closed top) hoisted & fixed in position including all necessary GI fittings such as nipple, union / sockets etc and connecting up pipes etc including dismantling old water tanks complete all as specified and directed.

M&L for roof truss (framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (beam, lee, agngle, channel or flat sections) including distance pieces, cleats etc and including dismantling of steel and iron work complete all as specified and directed.

R K CONSTRUCTION AND ENGINEERING

DURGA CONSTRUCTION & TRANSPORT

GS Associates