Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.6 LAccepted-AOC H NO 113 APR COLONY KATANGA CANTT JABALPUR M P PIN 482001 | JABALPUR | MADHYA PRADESH | 482001 | L1 | Accepted-AOC L1 bidder lowest | |
| 2 | L2₹49.2 L+₹2.4 L (5.03%)Rejected-Finance 1409 512 PREM NAGAR MADAN MAHAL JABALPUR M P | JABALPUR | MADHYA PRADESH | 482002 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹53.1 L+₹6.3 L (13.3%)Rejected-Finance | L3 | Rejected-Finance Other than L1 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
23 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Jabalpur
Garrison Engineer (West) Jabalpur Supply Marg Post Box No. 54 Jabalpur Cantt-482001 (MP)
REPAIR TO JOINERY AND CONNECTED WORKS IN AREA OF AGE B/R-II UNDER GE (WEST) JABALPUR
2022_MES_530679_2
8481/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Jabalpur
As per Tender documents
5 documents required · 5 mandatory
₹500
GE (West) Jabalpur
₹96,000
29 Aug 2022
2 Aug 2022
25 Aug 2022
2 Aug 2022
23 Aug 2022
9 Aug 2022
3 Aug 2022 - 8 Aug 2022
Amount
Taking down chowkats or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each
Taking down chowkats or frame with shutter (without taking of shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each
Taking down chowkats or frame area exceeding 1.5 Sq mtr but not exceeding 4.00 Sq mtr each
Taking down Shutter only not exc1 sqm each
Taking down Shutter only exc 1 sqm and n.exc 2 Sqm each
Takingdown wooden shutters of any description exc 1.00sqm but n exc 2.00sqm each and refixing the same opening after repairing excluding iron mongry etc all complete
M&L for pressed steel door frame of size 125 mm x 60 mm and 1.25 mm thick including necessary fixing lugs, hinges, lock strike platee etc., including making good to the disturbed surfaces and matching to the existing treatment (cement base paint/distemper/white wash/plastic paint) etc complete all as specified and directed
S&F second class HW plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including making good to the disturbed surfaces and matching to the existing treatment (cement base paint/distemper/white wash/plastic paint) etc complete all as specified and directed
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain clour PVC sheet reinforced with M.S square tube in opening as per specification including making good to the disturbed surfaces and matching to the existing treatment (cement base paint/distemper/white wash/plastic paint) etc complete all as specified and directed.
S & F powder coated (min thickness of powder coating 50 micorn) Aluminium door, window,ventilator frame with one or more rebates and shutter incl jointing cleat for fixing etc. including making good to the disturbed surfaces and matching existing treatment (cemnt base paint/distemper/white wash/plastic paint) etc complete, as spd .
S&F powder coated of any colour aluminum door shutters, aluminium section weighing 0.55 Kg/ Rm including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S & F factory made 100% Solid Wood plastic composite (WPC) Door frame 90mm x 45mm made from wood plastic composite (Single Extruded Process) material with density 780Kg/Cbm, all as per specification drawings and as directed by the Engineer-in-Charge Door should be water proof, Termite Proof, Fire Retardant & having good screw holding capacity including making good to the disturbed surfaces complete.
S & F SOLID PVC DOUBLE DOOR FRAME (CHOUKHAT) of size 120mm x 50mm with a wall thickness of 5mm (+0.25mm), made out of extruded 5mm (+0.25) mm thick PVC Sheet of density 600Kg/Cbm by joining 3 Nos. heat mouleded PVC Sections. The hinge section of size 35 x 35mm shall be made from plain colour PVC Sheet of 5mm (+0.25) thichness. The inside section will be covered with 5mm thich PVC sheet 'C' shape covering section of size 120mm x 50mm. At center top position 5mm (+0.25) thick 50x50x50mm pattam section should be pasted with solvent cement adhesive to make double pattam of frame. The frame shall be mitre cut at to corners & jointed with 4 Nos of 150mm long 'L' brackets of 19x19mm MS sq Tubeor fusion heat welding process. The two vertical doors frames are to be reinforced with 25x25mm MS sq Tube of 19 guge throughout the frame. The door frame shall be fixed to the wall using 8/100 mm fishcher screws. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc. including making good to the disturbed surfaces complete as per manufacturer's specification & direction of Engineer-in-charge
S&F 35 mm thick Plain framed factory made pannel door shutter ( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS 1003 ( Part-I) , kiln seasoned and chemically pressure treated.including making good to the disturbed surfaces complete all as specified and directed
S&F 35mm thick factory made second class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc divided into squares with plain chamfered or roundded mitred and rebated sash bars any numbers and fitted to chowkates including making good to the disturbed surfaces complete
S&F 30 mm thick PVC flush door shutter having one side lamination with 5mm thick rigid PVC prelaminated sheet and 2mm thick plain rigid PVC sheet on other side consisting of frame made out of MS tubes of 19 guage thickness and size of 19 mm x 19 mm for stiles wa well as top, bottom & lock rail. MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multi chamber Hollow PVC section, bonded using solvent cement/eynoacrylate adhesive with 5mm (+_0.25) thick Prelam PVC sheet of denisity 600 Kg/Cbn manufacured by an ISO-9001-2015 certified company, on both side of the inside panel. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of MS tube other hardware's should be fixed with 25 mm x 8 mm size steel screws etc complete as per direction of Engineer-in-Charge
S&F 24 mm thick PVC flush door shutter having one side lamination with 2mm thick rigid PVC prelaminated sheet and 2mm thick plain rigid PVC sheet on other side consisting of frame made out of MS tubes of 19 guage thickness and size of 19 mm x 19 mm for stiles wa well as top, bottom & lock rail. MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multi chamber Hollow PVC section, bonded using solvent cement/eynoacrylate adhesive with 5mm (+_0.25) thick Prelam PVC sheet of denisity 600 Kg/Cbn manufacured by an ISO-9001-2015 certified company, on both side of the inside panel. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of MS tube other hardware's should be fixed with 25 mm x 8 mm size steel screws etc complete as per direction of Engineer-in-Charge
S&F 30mm thick WIRE MESH SOLID PVC DOOR SHUTTER consisting of frame made out of M.S. Tubes of 19 guage thickness and size of 19mm X 19mm for stiles and 15mm X 15MM for top, bottom & lock rail. M.S. Frame shall have a coat of metal primer of approved make & manufacturer. 19mm x 19mm M.S. squqre tubes shell be covered with heat moulded plain sheet 'C' channel made from 5 mm (+0.25) thik PVC sheet of density 6 KG/Cbm Manufactured by an ISO-9001-2015 certified Company, of size 30 mm thickness, 90mm width out of which 75mm shall be flat and 15mm shall be bent in 90o angle on either side forming stiles, one of the 90o bend edge is cut from stiles as well as rails to nail from inner side of door to hide wiremesh fixing steel screws. 5mm (+0.25)thick 115mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be bent in 90o on the inner side to from top and bottom rail and 130mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be bent in 90o on both side to form lock rail. An additional 5mm (+0.25) thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent cement adhesive. Panel will be of /gi/SS wiremesh of 24 gauge to be fitted inside area of stiles & rails. The wiremesh in top, bottom & rock rail is sealed with 15mm X15mm tube with steel screw of size 13/6mm. 10mm (5mm x 2 Nos) thick PVC strip of 25mm width is to be stuck & nails on both side of GI wiremesh interior at the top, bottom & rock rail. 10mm thick (5mm x 2nos) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm x 25mm x 2mm and 32mm long steel screw drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19 x 6mm size steel screw etc. including making good to the disturbed surfaces complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.
Providing and fixing pre painted steel sliding window 3-Track, 2 glass panel and 1 mesh panel sliding window fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107x44mm, Section for shutter should be of 35x49mm. Section of mesh should be of 35 x 49 mm.The windows should be paneled with 5mm thick plain float glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM).The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws .
S&F steel windows with side hung shutters incl box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded including making good to the disturbed surfaces complete all as specified and directed
S&F steel windows with side hung shutters factory made incl box type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded including making good to the disturbed surfaces complete all as specified and directed
S&F powder coated anodised aluminum window and ventilator shutters, fixed type without sash bars, aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. including making good to the disturbed surfaces complete all as specified and directed.
S&F powder coated anodised aluminum window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (01 No), hinges type B-21 100mm long (02 Nos) suitable handle (01 No) including making good to the disturbed surfaces complete all as specified and directed.
S&F in repairs framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe 410-0 or Fe 310-0
S&F in repairs framed work as in doors or gates of angle or other section with gussest plates, rails, braces, etc, complete drilled for fixing and incl steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hnging door fittings and fixing complete conferming to gde Fe 410-w
M&L for applying two coat of synthetic enamel paint over a one coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth etc all complete.
S&F MS flat iron as in hold fast (25x3mm) etcall as specified and directed.
S&F galvanised MS wire cloth, 0.56mm nominal dia of wire average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc all complete.
S&F 100 mm long aluminium butt hinges alloy with galvanised ms hinge pin, anodized and fixed type C-21 etc all complete
S&F 150mm long aluminium anodised barrel tower bolt of extrudad section etc all complete
S&F 125mm long aluminium anodised handle cast type etc all complete
S&F 100mm long butt hinges heavy duty med wt cold rolled mild steel etc all complete
S&F 150mm long MS barrel tower bolts, stove enamelled black with bright bolt etc all complete.
S&F 125mm long MS pressed handles oval type stove enamelled black ect all complete
S&F 300mm long MS sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and etc all complete
M&L for applying two coat of synthetic enamel painting over a coat of pink primer including preparation of new wooden surface over 10 cm width or girth etc all as specified and directed.
M&L for cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 complete all as specified and directed.
Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed
M & L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement etc complete all as specified and directed.
M & L for preparation of new plastered surfaces and chalk whiting for priming to distempering and applying two coats of distemper oil emulssion, white or tinted, complete etc all as specified and directed.
S&F in repair 3mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares not exc 0.5 sqm each pane etc complete all as specified and directed by Engr-in-charge.
S&F in repair 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge.
S&F in repair 4 mm thick sheet glass, ordinary quality and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.
S&F in repairs 12 mm thick prelaminated MDF board interior grade both side decorative choice laminations fixed in aluminium frame work etc all complete.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. (Make: Hettich/ Sandhu)
S&F continious(Piano) hinges, mild steel,bright finish or electrogalanised,width of flap 30mm when open.
S&F 125 mm size brass handles, cast type, polished bright complete all as specified and directed.
S&F magnetic stopper suitable for cupboard, dressing table fixed with screws complete all as specified and directed.
S&F in repairs 25 mm thick block board ,grade 2 quality,interior grade,commercial type fixed with screws to timber frame-work.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L for Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
Ditto all as per above item but except brick
Supply and fixing in repair door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight upto 80 Kg of aluminium (Die cast) body complete all as specified and directed.
charanjeet singh
M/s Kehar Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .