Providing, supplying and fixing Furniture, electrical and other Civil works in Mechanical Block, IT block, Civil, Chem. Block and workshop building at Govt. Polytechnic College, Varkund, Nani Daman. (E-30096)

Amount

Civil work

(FACULTY TABLE) Providing, Fixing & Placing (SIMPLE FST + SIDE RUNNER + PEDESTAL) 1800 X 750 x 750 mm FST & 1200 X 450 x 750 mm SIDE RUNNER. Primary & Secondary both Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing access flap with in-build power box are provided on work surface for wire management. Modesty Panel- Made of 25mm thick MDF one side laminate board confirming to IS- 14587:1998. Under- structure-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal- Made of 18mm Thick Pre- laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 18mm thick MDF one side pre-laminate board confirming to IS- 14587:1998 Pedstal construction is 2 BOX + 1 FILE type which Uses powder coated 400 MM long metal Panel Drawer with Slides. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security as directed by engineer-in-charge.

(LAB TABLE) (EQUIPMENT TABLE) Providing , Fixing & Placing Equipment Table, Table top 36mm thick made from 18 mm thick MR grade plywood bothside covered 1 mm thick laminate finish. ( Size 1800mm x900mm x900mm) .All edge 2mm thick Pvc / 6mm teakwood beading will be provided. Under structure made of 50x50x1.6mm thick MS sq pipe with proper cross members made of 50 x 25 x 1.6mm thick powder coated finish. All necessary hardware included and supporting legs are as required. (50 X 50 PIPE UNDERSTRUCTURE + PLYWOOD + LAM TOP) as directed by Engineer in Charge.

(Class ROOM TABLE) FACULTY TABLE :-Providing , Fixing & Placing Staff Room Table (Size 1350mm x 750mm x750mm), Table top made from 18 mm thick MR grade plywood bothside covered 1 mm thick laminate finish with 12mm Thick Toughened Glass on Top. .All edge 2mm thick Pvc / 6mm teakwood beading will be provided.Under structure made of 50x50x1.6mm thick MS sq pipe with proper cross members made of 50 x 25 x 1.6mm thick powder coated finish. All necessary hardware included and supporting legs are as required. as per design given by the architect and approved by the engineer in charge.

HOD CABIN TABLE - 2100 X 900 WITH SIDE TABLE 1200 X 450 + PEDESTAL Providing , Fixing & Placing The Main table shall be of size 2100 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of 25mm thick Pre-laminated MDF twin board duly finished with approved laminate. The front modesty panel of the table shall be made up of Pre-laminated of 18mm thick which shall also be duly finished with approved laminate. For personal storage one mobile/fixed pedestal (3 drawer unit) shall be provided. The storage pedestal shall also be made up of 18mm thick Pre-laminated MDF board duly finished with approved laminate. The Side unit shall be of size 1200mm Width x 450mm Depth x 750 mm Height. The side unit shall be made up of Pre-laminated board duly finshed with approved laminate. The side unit shall contain open space for keeping cpu, one closed storage shutter & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm as directed by engineer-in-charge.

(FULL HT. / Low Ht. SOLID PARTATION) Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete for fixing POWDER COATED ALLUMINIUM PARTITION with Pipe section 63mm x 38mm x 1.63 mm including glazing clips and 25mm x 25mm x 1.80 mm having cross section C/C not more than 0.5 x 1.00 meter and Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge with Frosted/Clear Glass Planes of 6.0mm thickness and/or 5mm Thick ACP Sheet of color as approved by engineer-incharge fitting with rubber gasket and other fixture and fastening etc. complete :Providing material and labour charge for fixing Powder coated (50 Microns) Alluminium DOOR with pipe section 63mm x 38mm x 1.63 mm including glazing clips and 25mm x 25mm x 1.80 mm having cross section C/C not more than 0.7 x 1.00 meter and using Hardnersheet / Clear / Frosted Glass 6.0mm thick and/or 4mm Thick ACP Sheet of color as approved fitting with rubber gasket etc complete, Including Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.and Door closer etc. complete as directed by Engineer in charge with stainless steel cover plate minimum 1.25mm thickness, with Providing and fixing S.S. Door handles(Heavy) with screws etc 200mm long on both side, including Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete as directed by Engineer-incharge.

CENTER TABLE of size 900 (W) x 600(D) x 400 (H) with 12mm thick Toughened Glass top with understructure having Dia 12mm thick SS 304 grade as per design approved by engineer-in-charge.

(Flap CHAIRS) Providing , Fixing & Placing SEAT / BACK: The seat sub-assembly should be made up of 1.2±0.1cm thk Plywood upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. The seat can tip-up when not in use and thshould be feature can be used while stacking the chairs horizontally The back sub-assembly should be made up of injection-moulded polypropylene inner upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. The contoured back with width extension at the bottom should be a should be designed to give comfort to lower back. The back flexing features allows the back to tilt by 9c±2' to aid the user in adopting a comfortable reclining posture. Both these sub-assemblies should be fixed to the tubular structure, BACK SIZE: 45.2cm (W) X 44.6cm (I-I) SEAT SIZE: 47.0cm (W) X 50.0cm (D)TUBULAR FRAME STRUCTURE: The powder-coated 4 leg structure should be made of 2.2 ±0.03cm dia x 0.25 ±0.02cm thk M.S. E.R.W. Tube front and rear leg welded along with connecting tube made of 1.9 ±-0.02cm dia x 0.2 ±0.016cm thk M.S. E.R.W. Tube to form the tubular frame assembly. The legs should be provided with injection-moulded adopter bush in black Nylon and brake-loaded castors enabling easy maneuvering while not in use and stable sitting while in use_ The chairs can be stacked horizontally when not in use_POLYURETHANE FOAM: The Polyurethane foam should be moulded with density = 70.0 ±8.0 kg/m3 and Hardness = 20 ±2 for Seat & 16 ±2 for back at 25% compression. ARMRESTS: The armrest structure should be made up of 2.2 ±0.03crn dia x 0.25 ±0.02cm thk M.S. E R.W. Tube welded to the Tubular Frame structure and having a scratch-resistant tant ABS Arm top.FULL DESKLET: The Full Desklet assembly should be Flip-up type and should be made up of extension tube of 1.9 ±0.02em dia x 0_2 ±0.016cm thk PAS. E.R.W. Tube and a support tube on L.H. side of 1.6 ±0.02cm dia x 0.2 ±0.016cm thk M.S. E.R.W. Tube on which an scratch resistant tant ABS desklet top should be fixed and covered on bottom side with a bottom cover.BRAKE-LOADED CASTORS : The brake-loaded castors should be assembled to the chair legs, to give a free movement for maneuvering the chair when not in use and it will brake the movement when load should be applied (while in use) to give a stable feel. The twin wheel castors should be injection molded in black Polypropylene.Overall Dimensions of ChairSeat Height - 47.5 cm.Height - 89.0cm.Width & Depth of Chair as measured from base - Width-71.0cm and Depth-82.0 cm. as per design approved by the engineer in charge.

(TWO SEATER DESK CUM BENCH Size 1050X450X760mm) Providing, Fixing & placing Two seater seating top of standared width and Desk-Top Panel of standered width -All panels are made from 18mm thk Pre-laminated MR grade Plywood board (E1/P2 GRADE) with PVC edge banding on all sides. The panels have cornersrounded for safety usage. Understructure - All side metal frames and cross connectors are made from combination of 25.4 x1.6 mm thk (approx. 18 SWG) Round ERW tubes. The Welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating. Back supports which are provided at the rear back are made of 25.4 x 25.4 x 1.2 mm thick (approx. 18 SWG) square ERW tubes (As per IS:7138). The tubes are coated with min. 45 micron thickness of epoxy polyester coating. The shelves are made from 18mm thick Pre-laminated MR Grade Plywood. Hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They are made from 2 mm thk MS sheet(As per IS:513) and are coated with min. 45 micron thickness of epoxy polyester coating as per design given by the architect or approved by the engineer in charge

THREE SEATER SOFA - 2100x800x800mm Providing and fixing Sofa sturcture made from 18mm hardply wood supported with maranti Solid wood, back side and curved part Covered with 3mm flexi ply , sofa arm made from 12mm thick hard plywood supported with maranti solid wood . 75mm board & 2.25 mm thick elastic webbing stapling in seat frame at 100mm centre to centre distance, belt fastern in x & y axies of saet, elastic belt elongation 45% tensile strength 350 kg.100mm x 40 density polyurathane block foam covered with 25mm x 32 density super soft plyurathane Foam for soft touch filling in seat.50 mm x 32 density polyurathane bloack foam covered with 25mm x 32 density super soft polyurathne foam for soft touch filling in back.Stiching work done with well known german brand ( Aman / Gurtamen ) Thread. Nylone & polyster thread used as per application.SS 202 Grade used in sofa leg & leg sofa frame with mirror finish look.Aluminum presure die casted leg with mirror finish.wooden leg and frame made from Ghana specail teak wood with melamine finish. ALL SOFA HAVE STANDERD SIZE CUSTMIZATION NOT AVAILABLE as per design given by the architect and approved by the engineer in charge.

Providing, Fixing & Placing (900 mmx600mmx750mm) Workstations for computer made of Screen type front Partition- 900mm:30mm thick . Side Privacy panel made from 10mm thick frosted glass fitted on Glass brackets 500mmL x 400mm HT, Legs: Open type legs 50mmx50mmx1.2mm MS Pipe, Under structure: Metal powder coated: Table top is 25 mm thk Pre-laminated MDF Board covered with 2mm thick PVC edge bidding finish. Cable Management: Wire trunking to be provided below the table made of CRCA with clear data and power seperation,Round wire manager to be provided on table top, Vertical cable trunking system to be provided with Electrical panel to take wires into the cable manager. (SIZE APPROX 900 W X 600D DESKING TYPE WORKSTATION WITH RACEWAY BELOW, FRONT SCREEN, SIDE SCREEN, SIDE SCREEN 10MM FROSTED GLASS ON KOMAL BRKT. + KEYBOARD TRAY, SINGLE WORKSTATION Or BACK TO BACK WORKSTATION - AS PER LAYOUT) as per design approved by the engineer in charge. (900mmx600mm size is considered as a single unit for payment)

Providing & laying sandwitch Lab platform (sandwitch of 18 to 20 mm thick Granite and Kota stone of approved shade) of sandwitch type of required Top pattern stone sandwitch of 18 mm thk Granite of Z-black shade on top and 30 mm thk kota in bottom with sandwitch supports at required spacing of 30 mm thk two kota stone on sides and screed in between and 75 mm raised platform with 1:2:4 Cement Concrete and kota stone on top as per design and approved sample for all floors / all levels and 900mm vertical height. The partion & self shall be made up with granite stone and nos. of partions and self as per requirement/directed. The rate includes cutting for sink, rounding, champhering and mirror polishing of edges, facias of granite, including necessary bonding adhesive like Araldite or equivalent. (Only plan area shall be measured and paid for). The rate includes rounding, champhering and mirror polishing of edges. Rate shall be exclusive of SS sink, , Piller tap, Bib tap-couplin etc. complete.( Granite Shall be approved shade by engineer-in-charge. )

Lab platform shutter with frame : Providing, Fixing & placing Loft Shutter below lab plateform with appropriate frame work to fix the shutters, Shutters frame are made from 18mm thk Pre-laminated twin board (E1/P2 GRADE) with PVC edge banding on all sides & Inside frame are made from 18mm thick MR grade Plywood .The Shutters are openable type on Auto-closing ss hinges with SS Handles, Magnetic catch, tower bolts etc. to be provided to hold the shutters. under steucture Welded cabinet body should be of flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer. Shelf should be eight bend panel with 20mm height. Drawer tray should be of single piece construction. Drawer should be well supported on LH and RH ball slide suspension system. Steel door and drawer front is of double wall construction with sound dampening material filled inside. Doors should be easily removable and hinges should be easily replaceable. Knee space panel should be in 22 gauge construction. Storage Units to be of the Suspended Type Dimensions: W=1000mm, D = 750mm, H = 750 mm. Configurations: 2 Shutters 1 Drawer MOC: MSCRCA: IS – 513 (1994), Thickness: LH/RH side panels, shutter front, Bottom panel, Top front, Drawer

(LAB STOOL) Providing, Fixing & placing lab stool of size (400mm x 400mmx 560mm) Seat-Top Panel are made from 18mm thk Pre-laminated twin board (E1/P2 GRADE) with PVC edge banding on all sides.The panels have cornersrounded for safety usage. Understructure - All side metal frames and cross connectors are made from of 25.4 x 25.4 x 1.2 mm thk (approx. 18 SWG) Square ERW tubes duly powder coated with rubber foot on legs tube. The foot rest size as per requirement as directed by engineer-in-charge.

WHITE BOARD SIZE:-2400X1200MM Ultra Plus Boards Triple coated steel surface with a top coat of acrylic resin over a galvanized steel base.urface smooth & glossy with good surface hardness.Resists scratches.Fixing screw, anchor plugs, pen trays provided.Easy fixing new plastic hanging bracketsEasy fixing metal corners also provided. Accepts Magnets as per design given by the architect and approved by the engineer in charge.

(HOD CHAIR) Providing and supplying Executive highback chair of Center tilt mechanism, size of chair W-725 X D 700 X H 1145/1240, seat height with permanent contract mechanism with 360 degrees swivel mechanism for adapts to shifts posture. The chair include pneumatic seat height adjustment, tilt adjustment for back and also with two pair of caster PU UpholsteryCentre Tilt Mechanism Dual tone Handles with wood and Aluminium for Elegant look Aluminium Star Base Nylon Casters. 5 legged revolving molded nylon chair base with good quality of PU castors as per design given by the architect and approved by the engineer in charge.

(FACULTY CHAIR) Providing and supplying Mesh Back high chair size W 660 X D 620 X 1135/1235 H with fabric upholestery on Pu Foam Seat, Adjustable head rest and arm rest, adjustable lumbor support, self adjutable mechanism with 4 locking position with nylon caster and star base, nylon star base for extra load carrying capacity, The chair include pneumatic seat height adjustment, tilt adjustment for back and also with two pair of caster as per design given by the architect and approved by the engineer in charge.

(VISITOR CHAIR) Providing and supplying visitor chair size of W-550 X 605 D X 788 H , SS Tubular frame and legs with diameter of 16 mm, arm rest made of PVC for extra support and comfort, seat and back made of PVC upholestered. provide special interlock facility with nylon cap footcap as per design given by the architect and approved by the engineer in charge

Providing & Supplying COMPUTER CHAIR of seat size shall be 450x450 mm on 10 mm thick moulded comm. ply with 60 mm thick 40 density mouldd PU foam. Back rest size shall be 450x450 mm on 10 mm thick moulded comm. ply with 40 mm thick 32 density moulded PU foam covered with tapestry. The height of back rest shall be 900 & 500 mm for top and bottom edge respectively. The back rest shall be provided with lifting arrangement on flat iron & helical spring. Two nos. suitable PU handles shall be provided. The base stand should be made up of 5 prongs durly pressed welded together centrally with a pedestal bush with good quality twin wheel castors. The stand and other metal parts excluding central spindle shall be power coated complete steel structure shall be pretreated and power coated with minimum thickeness of 60 microns coating. A Central spindle of 25 mm dia rod without threads shall be provided with revolving arrangement. The adjustable height of chair shall be from 530 to 570 mm. A good quality tapestry cloth shall be provided on seat & back in approvede clour/shade as per design given by the architect and approved by the engineer in charge.

(LIBRARY CUPBOARD) Providing , Fixing & Placing Overall Dimensions of Single Sided Wood & Steel Book Rack Base Unit shall be 900mm(W)x450mm(D)x1890mm(H). Rigid Knockdown construction . Back panel up to the bottom of third rack for additional rigidity . Racks, Back panel & Skirting : CRCA 0.8 mm thickness . Side panels : 25 mm thick pre laminated particle board (PLB) with laminate on both sides . Stackability shall have add-on units width wiseto form a bank of racks having common side panel . Bottom plus four fixed racks plus five storage levels . Each rack is provided with stiffener at bottom for strength . Uniformly distributed load capacity per each full shelf is 80 Kg maximum . Rack back stiffener shall be there at the rear side of the racks back stiffener s are provided . These are to support books on the rear side . Label Holder on each main unit to insert labels for identification . Finish shall be Epoxy polyester powder coated to the thickness of 50 microns design and make as per direction of engineer-in-charge.

(STAGE) Providing and fixing 300mm to 450mm HEIGHT Stage made of 18+18mm thick MR grad plywood vertical and horizontal support coverd with 18mm thick mr grad plywood with 1mm thick laminate / 1mm thick pvc carpet as per design approved by the engineer in charge.

Roller Blinds : Providing and fixing blinds as per approved make as per suggested shade & spring drive system with steel ball chain/one touch with speed control action roller blind with end brackets with head rail, components, bottom bar. Fabric : screen classic 5% Fabric value : 465 gsm , Thickness : 0.65 mm Fabric to be as per approved sample. All the work complete as per the detailed drawing , mockup sample and instruction of Architect/EIC.All complete as per approval of designer. The mode of Measurement: The size of the blind will be measured from end to end bracket (Left to Right bracket) height will be measured from top of the pelmet to sill bottom level and clear opening size only there will be not extra payment towered overlapping.& mockup sample approved by the Architect/ EIC. as per design given by the architect and approved by the engineer in charge

Office visitor sofa : Providing , Fixing & Placing Size :- 1800 x 670 x 790mm Providing and Arranging Chrom gang Seater Seat and Back perphoreted sheet S.S Crom,leg and handle molded work, Including all materials and labour etc. complete as per design given by the architect and approved by the engineer in charge.

(LAB STORAGE) • Providing , Fixing & Placing Manufactured by Prime Quality CRCA”Cold rolled Close Annealed “Steel Sheets. •Body and Drawer made from 22 Gauge Steel Sheet (0.8mm). •Knock-Down Construction. (Nos. of self as required/directed.) •Locking facility available with a duplicate key. •Welded Construction and Glass Door. •Dimensions- 900 mm W x500mm D x1970mm H Design as directed by engineer-in-charge.

Supplying & erecting approved make low noise decorative exhaust fan having size 200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square frame.

Providing, Supplying, Installation & testing of latest design industrial module Eco Ventilator-Zero power Air Ventillation System with 28" diameter, outside exposed parts like top cap & neck ring made out of SS304 with turbo vanes made of Hi-grade aluminium, improved venture design & UV Stable for roofing sheet profile including all taxes, freight, insurance charges & all fixtures required for fixing of approved make as directed by engineer-in-charge.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. 20 mm dia

40 mm dia

Providing and fixing wall hung W.C pan of jaguar or equivalent with complete unit of seat cover brackt etc. complete as directed by Engineer in charge.

Providing & fixing of 32 mm CP concealed Metropol Flush Valve with round flange, & required accessories & civil work for complete installation.

Providing and fixing Vitreous China oval shape washbasin of size 550 mm x 400mm with hole for pillar tap including C.P brass waste for washbasin, waste pipe and fixing in granite platform making good the same complete in white colour.

Providing and fixing basin PRESSMATIC CP pillar tap with required braided pipes from basin pillar tap to angle valve etc complete.

Providing & fixing PVC Floor Trap OR multi floor trap with 50 mm water seal & with necessary distance piece and 150x150mm grating, making necessary SLAB /WALLholes and cutting walls, etc complete. 110 X 75 mm

Providing & fixing 15mm C.P. brass angle valve with C.P. with wall flange complete, including cutting and making good the wall where required.

Providing & Fixing bib cock of jaguar or equivalent as directed by engineer in charge.

Providing and fixing PVC Pipe ISI marked brand as per IS:4985 (6 kg.) complete with PVC Fittings & clamps & hinges including cutting and making good the walls & ceiling for waste pipes, connections & as directed by the Engineer-in-Charge. (Wash out pipes from fixture to trap) - 75 mm dia.

Providing & fixing white vitreous china flat back urinal of size 590x375x390mm as per IS-2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P. spreader,waste coupling, C.P. wall flange complete including cutting and making good the walls and floors wherever required.

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional

Providing 15mm thick cement plaster in single coat on fair side of brick / concrete wall for interior plastering up to floor two level finished even and smooth in C M 1:4 ( 1 cement 4 coarse sand) including finishing with a flouting coat of neat cement slurry with Niru finish complete. For all floor height.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Foundations, footings, Base of columns and Mass concrete as per direction of the Engineer - in - charge.

Providing TMT Bar FE 500 reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level

Providing & Laying 24" x 24" vitrified 8 mm thick tile Skirting/flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit tiles.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade area of slab upto 0.50 sqm, etc complete as directed by engineer-incharge

Providing & fixing M.S. grill for window of required pattern to wooden frames of windows/ brick masonry/RCC with necessary M.S. angle, M.S. pipe, M.S. flats and other structural steel at required spacing and frame around square or round bars with round headed bolts and nuts or by screws including cutting welding and fabrications etc. complete as directed, grills design and pattern approved by this office .

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new/old wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Distempeing (Two or more coats as required) with oil bound washable distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a priming coat with alkali resistance primer of approved brand after thoroughly brushing the surface and other foreign matter and also including preparing the surface even and sand parpered smooth.

Providing and fixing rolling shutters of approved make made of 80 mm wide M.S. laths interlocked together through their entire length and jointed together at the end by end locks,mounted on specially deigned pipe shaft with brackets side guides and arrangement for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire spings manufactured from high tensile steel wire od adequate strength conforming to IS 4454 part-1 and ms top cover of 1.2 mm thickness of rolling shutter. Also provide mechanical device chain and crank operation for operating rolling shutter.

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Scrapping old white or colour wash including disposal of refuse as directed by Engineer-In-charge to all lead and lift.

Dismentling doors, windows, ventilators etc. (wood or steel or rolling shutter) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking or disposal them within all lead and lift.(ii) Exceeding 3 Sq.M. in area.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them or disposal within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismantling wooden boarding in lining of walls and partitions to any thickeness with supporting members including stacking of serviceable materilas and disposal of unserviceable materials to all lead and lift.

Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift.

Dismentaling tiled or stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.

SH: - I Mechnical Department Point wiring for Light / Bell with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 KV grade FR PVC insulated multi strand copper wires, in following type of pipe to be erected concealed in / on surface on wall / ceiling complete with 6 A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary Lamp holder / ceiling rose / H.D. Connector as directed. (c) with oval conduit / pvc casing capping double lock type.

Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer Incharge. One No. SP 6 Amp.

One No. 5 pin plug.

16 Amp. SP one way switch.

6/16 Amp. Universal socket.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall/celling of following size. 25 mm.

Mains with 1.1 KV grade FRPVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in / flushed on wall/ ceiling, with 1.5 sq.mm. copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size. (e) in existing pipe. 2 wire 2.5 sq. mm.

Mains with ISI marked, 1.5 KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lungs, nuts and bolts if required. One wire 10.00 sq. mm.

Miniature circuit breaker single pole 6A to 32A. Suitable to operate on 240V. A.C. system and having breaking capacity 10 KA to be erected in existing box. Confirming to IS 8828 / 1996 with ISI Mark.

Providing & erecting 240V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828 in existing box having following capacity 6 to 32 Amp.

Supplying & erecting 20 Amp. 10KA. ‘C Curve’ single pole MCB with 20 Amp. plug socket, company fabricated powder coated sheet enclosure erected as directed with connection A] Metal Clad Socket with Metal clad top Cat. III

Providing and erecting Three pole MCB isolator A.C. 22 duty confirms to IS 13947-3 in existing box. (a) for 40 Amp.

Providing and erecting Sheet Steel powder coated MCB distribution board – flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 with out MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used). Three phase 4 way SS Double door for single phase outgoing horizontal box.

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistoried copper conductor for 1.1 KV to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. 4 core 4 Sq. mm.

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 Cys. 1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing [ Make shall be approved by Engineer in charge]

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt ,LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates). Tube Light with integral/ non-integral driver. 36 Watt, Surge – 4KV, IP-20, 4 feet.

SH: - II Mechanical Block Providing & Erecting approved make split air- conditioning unit consisting of condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor. For 2 ton capacity.

Supply & erecting of M.S. Stand Powder Coated for fixing outdoor unit of Split Air Conditioners.

Installation charges of the Air Conditioners (split type) 2 ton capacity.

Supplying & fixing of copper pipe , insulation drain pipe 3 core 2.5 sq. m. wire etc.

SH: - III Work shop Bldg Point wiring for Light / Bell with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 KV grade FR PVC insulated multi strand copper wires, in following type of pipe to be erected concealed in / on surface on wall / ceiling complete with 6 A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary Lamp holder / ceiling rose / H.D. Connector as directed. (c) with oval conduit / pvc casing capping double lock type.

Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer Incharge. One No. SP 6 Amp

One No. 5 pin plug.

16 Amp. SP one way switch.

6/16 Amp. Universal socket.

Mains with 1.1 KV grade FRPVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in / flushed on wall/ ceiling, with 1.5 sq.mm. copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size. (e) in existing pipe. 2 wire 2.5 sq. mm.

Providing & erecting 240V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828 in existing box having following capacity 6 to 32 Amp.

Supplying & erecting 20 Amp. 10KA. ‘C Curve’ single pole MCB with 20 Amp. plug socket, company fabricated powder coated sheet enclosure erected as directed with connection A] Metal Clad Socket with Metal clad top Cat. III

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistoried copper conductor for 1.1 KV to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. 4 core 4 Sq. mm.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt ,LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates). Tube Light with integral/ non-integral driver. 36 Watt, Surge – 4KV, IP-20, 4 feet.

SH: - IV Work shop Bldg Providing & Erecting approved make split air- conditioning unit consisting of condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor. For 2 ton capacity.

Supply & erecting of M.S. Stand Powder Coated for fixing outdoor unit of Split Air Conditioners.

Installation charges of the Air Conditioners (split type) 2 ton capacity.

Supplying & fixing of copper pipe , insulation drain pipe 3 core 2.5 sq. m. wire etc.

SH: - V- Civil Bldg. Point wiring for Light / Bell with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 KV grade FR PVC insulated multi strand copper wires, in following type of pipe to be erected concealed in / on surface on wall / ceiling complete with 6 A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary Lamp holder / ceiling rose / H.D. Connector as directed. (c) with oval conduit / pvc casing capping double lock type.

Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer Incharge. One No. SP 6 Amp.

One No. 5 pin plug.

16 Amp. SP one way switch.

6/16 Amp. Universal socket.

Mains with ISI marked, 1.5 KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lungs, nuts and bolts if required. One wire 10.00 sq. mm.

Providing Approved make Triple Pole Metal/Iron Clad Switch & Fuse with neutral link 415 / 500 V confirming to I.S.S. (a) 63A

Approved make Three pole moulded case circuit breaker having breaking capacity / strength ICU of 35K.A. at 415V. having normal current rating up to 125A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50c/s. with all internal connections & complete erected in existing 16G.M.S. housing. ICS = 100% of ICU only Cat. III.

Miniature circuit breaker single pole 6A to 32A. Suitable to operate on 240V. A.C. system and having breaking capacity 10 KA to be erected in existing box. Confirming to IS 8828 / 1996 with ISI Mark.

Providing & erecting 240V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828 in existing box having following capacity 6 to 32 Amp.

Supplying & erecting 20 Amp. 10KA. ‘C Curve’ single pole MCB with 20 Amp. plug socket, company fabricated powder coated sheet enclosure erected as directed with connection A] Metal Clad Socket with Metal clad top Cat. III

Providing and erecting Three pole MCB isolator A.C. 22 duty confirms to IS 13947-3 in existing box. (a) for 40 Amp.

Providing and erecting Sheet Steel powder coated MCB distribution board – flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 with out MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used). Three phase 4 way SS Double door for single phase outgoing horizontal box.

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistoried copper conductor for 1.1 KV to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. 4 core 4 Sq. mm.

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 Cys. 1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing [ Make shall be approved by Engineer in charge]

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt ,LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates). Tube Light with integral/ non-integral driver. 36 Watt, Surge – 4KV, IP-20, 4 feet.

Providing and erecting Annealed bare Copper wire 8 to 16 S.W.G.

Supplying & erecting earth pit of minimum bore dia. 150mm size, approved make Safe Earthing Electrode consisting Pipe-in-pipe Technology as per IS 3043-1987 made of corrosion free G.I. Pipe having Outer pipe dia of 50mm having 80-200 Micron galvanizing, Inner pipe dia of 25mm having 200-250 Micron galvanizing, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications For electrical installation up to 440 V in normal soil Length of pip: 1 Mtr. Back filling compound – 1 Nos. Bag of 15 Kg.

Providing and erecting required size HOT deep Galvanised strip for earthing of H.T. OCB / ACB / Transformer LT panel board, Motors etc. using Proper clamp.

SH: - V- Civil/ Chem Bldg. Providing & Erecting approved make split air- conditioning unit consisting of condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor. For 2 ton capacity.

Supply & erecting of M.S. Stand Powder Coated for fixing outdoor unit of Split Air Conditioners.

Installation charges of the Air Conditioners (split type) 2 ton capacity.

Supplying & fixing of copper pipe , insulation drain pipe 3 core 2.5 sq. m. wire etc.

SH14-10-2021- VII IT Bldg Point wiring for Light / Bell with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 KV grade FR PVC insulated multi strand copper wires, in following type of pipe to be erected concealed in / on surface on wall / ceiling complete with 6 A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary Lamp holder / ceiling rose / H.D. Connector as directed. (c) with oval conduit / pvc casing capping double lock type.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm. (green) both are of ISI marked 1.1 KV Grade FR PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall / ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC/Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on/ in wall / ceiling as per pipe erected, with necessary ceiling rose / H.D. Connector as directed. (c) with oval conduit / pvc casing capping double lock type.

Providing following type of Modular Type Accessories mounted with pvc / metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer Incharge. One No. SP 6 Amp.

One No. 5 pin plug.

16 Amp. SP one way switch.

6/16 Amp. Universal socket.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with grooves, trunking of size not below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene not below 1.8 mm thick duly sealed in joint & erected on wall/celling of following size. 25 mm.

Mains with 1.1 KV grade FRPVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in / flushed on wall/ ceiling, with 1.5 sq.mm. copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size. (e) in existing pipe. 2 wire 2.5 sq. mm.

Mains with ISI marked, 1.5 KV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lungs, nuts and bolts if required. One wire 10.00 sq. mm.

Miniature circuit breaker single pole 6A to 32A. Suitable to operate on 240V. A.C. system and having breaking capacity 10 KA to be erected in existing box. Confirming to IS 8828 / 1996 with ISI Mark.

Providing & erecting 240V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828 in existing box having following capacity 6 to 32 Amp.

Supplying & erecting 20 Amp. 10KA. ‘C Curve’ single pole MCB with 20 Amp. plug socket, company fabricated powder coated sheet enclosure erected as directed with connection A] Metal Clad Socket with Metal clad top Cat. III

Providing and erecting Three pole MCB isolator A.C. 22 duty confirms to IS 13947-3 in existing box. (a) for 40 Amp. Cat. III

Providing and erecting Sheet Steel powder coated MCB distribution board – flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 with out MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used). Three phase 4 way SS Double door for single phase outgoing horizontal box.

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 Cys. 1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing [ Make shall be approved by Engineer in charge]

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with company mark/name 120 to 300 V,Power Factor more than 0.9, THD < 10 %, CCT 4000 K to 6500K, Uniformity ratio >0.7, Luminaire efficiency> 85 lumens/watt ,LED driver efficiency > 85 % CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each fitting required LM-79 & LM-80 Certificates). Tube Light with integral/ non-integral driver. 36 Watt, Surge – 4KV, IP-20, 4 feet.

SH;-VIII IT Building Providing & Erecting approved make split air- conditioning unit consisting of condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor. For 2 ton capacity.

Supply & erecting of M.S. Stand Powder Coated for fixing outdoor unit of Split Air Conditioners.

Installation charges of the Air Conditioners (split type) 2 ton capacity.

Supplying & fixing of copper pipe , insulation drain pipe 3 core 2.5 sq. m. wire etc.

Hitendra A Patel

Anand Associates