REPAIR / MAINT OF, LT PANELS, MCCBs, EARTHING, CONNECTED CABLES AND ALLIED WORKS, BLDG SECURITY LIGHT FITTINGS, LIGHTENING CONDUCTORS, EARTHING AND SUMMER/ WINTER APPLIANCES, CEILING /EXHAUST FANS, CONNECTED WORKS AT OAF UNDER GE 970 EWS.

Amount

Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth and getting out in soft/loose soil or hard/dense soil for taking up or laying of cable complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cms complete all as specified and directed.

Removal of surplus soil not exceed to a distance of 50M where directed at a level not exc . 1.5M above the starting point complete all as specified and directed.

Supply and laying dry river sand laid in trenches as cable cushioning and covering complete all as specified and directed. Note : Punned thickness only measured and paid

M & L for brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed.

Taking down old unserviceable LT UG cable from any description (trenches, walls, ceilings., etc) from various locations, including any short length, Supply and laying under ground LT Cable XLPE insulated heavy duty armoured sheathed 1100 volts grade of cross sectional area 185 Sq mm, 3.5 core, with aluminium conductor with suitable size aluminium cable lugs and jointed in any description complete all as specified & directed. NOTE : 1. Excavation, cable protection bicks, pipe, PCC work for road crossing / hard standing and Sand for cushioning will be measured and paid separately. 2. Cost of aluminium cable lugs , gable gland, new nut, bolt and washers of required size / description are deemed to include in this rate.(Make-havells,gloster for item no 6 to 18)

Description all as per ser item No 6 above but of size 150 sqmm 3.5 core complete all as specified and directed.

Description all as per ser item No 6 above but of size 120 sqmm 3.5 core complete all as specified and directed.

Description all as per ser item No 6 above but of size 95 sqmm 3.5 core complete all as specified and directed.

Description all as per ser item No 6 above but of size 70 sqmm 3.5 core complete all as specified and directed.

Description all as per ser item No 6 above but of size 50 sqmm 3.5 core complete all as specified and directed.

Description all as per ser item No 6 above but of size 35 sqmm 3.5 core complete all as specified and directed.

Description all as per ser item No 6 above but of size 25 sqmm x 4 core complete all as specified and directed.

Description all as per ser item No 6 above but of size 16 sqmm x 4 core complete all as specified and directed.

Description all as per ser item No 6 above but of size 16 sqmm x 2 core complete all as specified and directed.

Description all as per ser item No 6 above but of size 10 sqmm x 4 core complete all as specified and directed.

Description all as per ser item No 6 above but of size 10 sqmm x 2 core complete all as specified and directed.

S & F in repairs MCCB 4 Pole, current rating 400 Amp, adjustable over load and short circuit with Micro processor release setting , breaking capacity 36 KA at 415V, 50Hz, of (Make : L & T / Legrand / Schenedier) incl necessary spreaders / cable lugs / nut, bolt and washers if required complete all as specified and directed.

Description all as per ser item No 18 above but 4 pole 250 A, having breaking capacity 36 kA complete all as specified and directed.

Description all as per ser item No 18 above but 4 pole 200 A, having breaking capacity 36 kA complete all as specified and directed.

Description all as per ser item No 18 above but 4 pole 160 A, having breaking capacity 36 kA complete all as specified and directed.

Description all as per ser item No 18 above but 4 pole 125 A, having breaking capacity 36 kA complete all as specified and directed.

Description all as per ser item No 18 above but 4 pole 63 A, having breaking capacity 36 kA, complete all as specified and directed.

S & F in repairs MCCB 3 Pole, current rating 350 Amp, adjustable over load and short circuit with Micro processor release setting , breaking capacity 36 kA at 415V, 50Hz, of incl necessary spreaders / cable lugs / nut, bolt and washers if required complete all as specified and directed.

Description all as per ser item No 24 above but 3 pole 250 A, having breaking capacity 36 kA complete all as specified and directed.

Description all as per ser item No 24 above but 3 pole 200 A, having breaking capacity 36 kA complete all as specified and directed.

Description all as per ser item No 24 above but 3 pole 160 A, having breaking capacity 36 kA complete all as specified and directed.

Description all as per ser item No 24 above but 3 pole 125 A, having breaking capacity 16 kA complete all as specified and directed.

Description all as per ser item No 24 above but 3 pole 63 A, having breaking capacity 16 kA, complete all as specified and directed.

S & F in repairs APFC Relays with auto set function having 6 + 1 steps 7 stage suitable for 415 Volts incl necessary connections complete all as specified and directed. (Make : L & T / Legrand / Schenedier)

S & F in repairs APFC Relays with auto set function having 4 + 1 steps 5 stage suitable for 415 Volts incl necessary connections complete all as specified and directed. (Make : L & T / Legrand / Schenedier)

S & F in repairs APFC Relays with auto set function having 3 steps 3 stage suitable for 415 Volts incl necessary connections complete all as specified and directed.(Make : L & T / Legrand / Schenedier)

S & F in repiars MPP type Box capacitor (Resin filled) three phase heavy duty type of capacity 20 to 50 KVAR rating suitable for 440 Voltage incl necessary connections complete all as specified and directed.

S & F copper bus bar of any size with necessary provision of hole with fixing of new nut, bolt and washers of existing size in the panel board for any addition / alteration complete all as specified and directed.

S & F in repairs Aluminium bus bar of any size with necessary provision of hole with fixing of new nut, bolt and washers of existing size in the panel board complete all as specified and directed.

S & F in repairs of copper control cable multistranded with suitable size copper lugs crimped on both side of any type of size 25 Sqmm for internal connection incl PVC tie complete all as specified and directed.

Description all as per ser item No 36 above but of size 16 Sqmm complete all as specified and directed.

Description all as per ser item No 36 above but of size 10 Sqmm complete all as specified and directed.

S & F in repairs Copper wound with CTR 400/5 A rating complete all as specified and directed.

S & F in repairs Copper wound with CTR 200/5A rating complete all as specified and directed.

S & F in repairs Indicator Lamps (LED type) showing R,Y, B phase complete all as specified and directed.

S & F in repairs MCB TPN 63Amps, 10 KA 'B' Curve,415 V as per complete all as specified and directed.

S & F in repairs MCB TPN 32 amps 10 KA 'B' Curve, 415 volts C series complete all as specified and directed.

S & F in repairs MCB SPN 32 Amps, 10 KA 'B' Curve 240 volts complete all as specified and directed.

S & F in repairs MCB SP 10 KA 'B' curve 10 Amps, 230V complete all as specified and directed.

Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 metre below normal ground level with top edge of the earth plate not less 1.5 metre below normal ground level connected with and including GI strip of size 32x 6 MM by means of bolts and nuts check nut and washer of galvanized iron with & including PCC pit in PCC 1:2:4 type B-1, precast RCC cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 7.5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point, and testing on completion including taking down old unsv earthing, complete all as specified and directed. Note :- (i) RCC pit cover shall be pre cast of RCC (1:2::4) type B , 80 mm thick reinforcement with 8 mm TOR steel @ 100 c/c in lie if CI cover and the rate includes in the unit rate . (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe and the rate includes in the unit rate. (iii) Earth pit Cover shall be painted in Red paint over a primer and the rate included in the unit rate.

S & F in repairs Galvanised iron strip 32 x 6 mm buried in ground / fixed on walls / ceilings by using suitable size GI saddles etc incl taking out old one complete all as specified and directed.

Supply and fix or laying in trenches / on wall / poles / structures in repairs GI tubing light grade 50mm dia for road crossing for cable protection of the following sizes including necessary suitable size MS flat fixing clamps, fixing screws complete all as specified and directed.

Supply and fix or laying in trenches / on wall / poles / structures in repairs GI tubing light grade 40mm dia for road crossing for cable protection of the following sizes including necessary suitable size MS flat fixing clamps, fixing screws complete all as specified and directed.

Supply and fix in repairs clamp made up of GI strip 25 x 3 mm thick to fix in the RCC/PCC pole for tying of street light connection cable of required length / size from bottom to top of the LT pole incl necessary GI nut, bolt and washers complete all as specified and directed.

Supply and fixing LED Bollard integral decorative with PMMA diffuser 10 watt of height 0.6 meter with IP 65 protection suitable for single phase 230 volts 50 HZ AC Supply including LED bulb , Poles, service wire and cement work complete all as specified and directed.

Supply and fixing new generation, post top energy saving environmently friendly 25W , long life aesthetically designed with symmetrical light distribuiton spun aluminium landscape luminaire with high power LED as light sources complete all as specified and directed.

M & L for Painting of steel tubular pole 9.0 mtr long, by applying one coat of alluminium paint after scraping / brushing and cleaning the rust on pole and cross arms . Alluminium painting will be done on pole above 1.5 Mtr hight from ground level and balance 1.5 mtr from ground level will be painted by alternate layer of black and white enammelled paint ( 30 cms each) Pole Nos will be written on pole by black paint in yellow circle of 150mm dia complete all as specified and directed.

Supply and fix moulded (FRP) junction box with IP 65 protection of size 300x200x105 mm with 32 Amp 4 way heavy duty terminal block with 6 Amp MCB SP and two number of cable entry gland of standard size with suitable MS clamp to fix with pole complete all as directed

M&L for Sub Main wiring using FR Insulated unsheathed, multistrand copper conductor FR-LS PVC cable 2 runs of size 2.5 sqmm for phase and neutral and 1.5 Sq mm for earthing. drawn through rigid PVC conduit 20 mm dia with clamps for fixed on pole for connection from junction box to light fittings / switch complete all as directed by Engr-in-Charge. Note: Two runs of cable for phase / neutral and one run of cable for earth incl conduit will be measured and paid as one unit length.

M&L GI Pipe Bracket made out of Galvanised Iron Tubing 40mm bore (dia), light grade, 1.20 Metre long bent to shape as per specified for fixing Street Light Fitting including suitable size of clamps and applying Two coats of Aluminium Paint over a coat of Aluminium Primer including taking down old unserviceable GI Pipe Bracket with clamps, complete all as specified and as directed.

M&L Electronic Driver with Input Voltage 220 to 240 Volt and Output Voltage suitable for LED Light Fitting of capacity 150 Watt, complete all as specified and as directed.

Description all as per ser item no 60 above but for LED Light Fitting of capacity 100 Watt complete all as specified and directed.

Description all as per ser item no 60 above but for LED Light Fitting of capacity 60/72/75 Watt complete all as specified and directed.

Description all as per ser item no 60 above but for LED Light Fitting of capacity 45 Watt complete all as specified and directed.

Supply and fix LED flood light fitting of 120 Watts with driver inside a pressure die cast aluminium housing with toughened front glass cover, IP65 degree of protection includig taking down of existig unserviceable flood light fitting of any description complete all as specified and directed.

Description all as per ser item no 64 above but of 170 Watts complete all as specified and directed.

Description all as per ser item no 64 above but of 210 Watts ompton Greaves complete all as specified and directed.

S&F 35 W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 80lm/W. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of sutable dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed.

Description all as per ser item no 67 above but of 60 watt complete as specified and directed.

Description all as per ser item no 67 above but of 70 watt complete as specified and directed.

Description all as per ser item no 67 above but of 90 watt complete as specified and directed.

Description all as per ser item no 67 above but of 100 watt complete as specified and directed.

Taking down u/s ceiling fan any size or sweep after disconnecting, dismantling and removal to trade workshop for repair, complete all as specified and directed

Opening the unserviceable/burnt fan 1200/1400 mm sweep and cutting of old burnt copper winding and rewinding the same with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, reassembling, testing and connecting for satisfactory run, complete all as specified and directed.

Supply and replacing of Ball bearing of the ceiling fan (any sweep) as per existing size incl greasing/oiling, complete all as specified and directed.

Supply and replacenment gun metal bushes of surface size for ceiling fan/ceiling fan incl necessary mechanical work, complete all as specified and directed.

Supply and replacing of cord cable, three core 0.5 Sqmm PVC insulated copper conductor cable for connecting ceiling fan, complete all as specified and directed.

Supply and replacing electronic step type fan regulator 240 Volt, 50 C/S, five step, suitable for 1200/1400mm sweep ceiling fan,complete all as specified and directed.

Supply and Fix Capacitor of of 2.5 MFD for ceiling fan, complete all as specified and directed.

Supply and Fix Capacitor of 4 Mfd for exhaust fan, complete all as specified and directed.

M & L for replacement ceiling fan blade set of three heavy duty suitable for 1200/1400mm sweep of suitable approved make complete as specified and directed.

Supply and Fix PVC canopy for ceiling fan 1200/1400mm sweep complete for various makes/model of fan, complete all as specified and directed.

M & L for Disconnecting and taking down exhaust fan and blades any size or sweep after dismantling and removal to trade workshop for repair, complete all as specified and directed.

M & L for strip opening and cutting of old burnt copper winding of exhaust fan and rewinding of exhaust fan motor of sweep 450mm with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, re-assembling, testing and connecting for satisfactory run, complete all as specified and directed.

Description all as per ser item No 83 above, but of 300mm sweep complete as specified and directed.

M & L for Ball bearing of exhaust fan of any size/make as per the existing, complete all as specified and directed.

M & L for painting the exhaust fan including louvers of size 300/450mm sweep with two coats of synthetic enamel paint after cleaning and making the surface of oil/dust free, complete all as specified and directed.

M & L for servicing of Geyser by disconnecting the electric and water supply connections, dismantling the geysers of any size, type & capacity and opening the top and bottom cover, thermostat, heating element, safety valve, vent pipe, separating inner & outer tank, removing glass wool insulation complete and keeping aside for re-use after de-scaling of inner tank by liquid chemical and with pressure water jet and assembling back the geyser including re-installation on wall with studs, nuts & bolts complete and testing after reconnecting electric and water connections, complete all as specified and directed.

Supply and fiixing of Heating element for geyser of cap 1.5KW, AC 230 Volts, 50 Hz (as per sample), complete all as specified and directed.

Supply and fiixing Heating element for geyser of cap 2.0KW, AC 230 Volts, 50 Hz (as per sample), complete all as specified and directed.

Supply and fiixing thermostat for Geyser of capacity 25/50/100 ltr (long size) with temperature setting adjustment range from 40 to 85°C, ISI Marked, complete all as specified and directed.

Supply and fiixing Geyser Syphon Assembly Set suitable for 25 ltr capacity geyser, fixed in replacement, complete all as specified and directed.

Description all as per ser item No 91 above but for 50 Ltr capacity complete all as specified and directed.

Description all as per ser item No 91 above but for 100 Ltr capacity complete all as specified and directed.

S & F Rubber gasket for water heater storage type of any capacity fixed, in replacement and suitable as per the existing, complete all as specified and directed

Taking down old unserviceable plug top from geyser connection and Supply and Fixing in replacement plug top 15/16 Amps for Geyser, complete all as specified and directed.

S & F PVC sheathed three core copper conductor flexible wire of size 2.5 Sqmm for connecting geyser, complete all as specified and directed.

S & F sheet metal enclosure with 2 pin and earth plug and socket complete with and including MCB 20 Amps 240 volts heavy duty.

Supply and replacement of safety valve for geyser of 25/35/50 litre capacity, complete all as specified and directed

Supply and replacement of non return valve 15mm dia for geyser of 25/50 litre capacity, complete all as specified and directed.

Supply and replacement of heavy duty PVC connector 600mm long 15mm dia with PTMT nut for geyser of 25/50 litre capacity, complete all as specified and directed.

M & L for disconnecting and taking out geyser of capacity 25 litre and replacement of copper/SS inner tank and refilling of glass wool, refixing, connecting and testing, complete all as specified and directed.

Description all as per ser item No 101 above but for 50 Ltr capacity complete all as specified and directed.

Description all as per ser item No 101 above but for 100 Ltr capacity complete all as specified and directed.

Taking down old unserviceable and supply & fixing stop cock brass 15mm dia not less than 200 grams, complete all as specified and directed.

M & L for preparation of surface of Geyser of capacity 25/50/100 Ltr by scarping, removing old paint etc and applying two coats of synthetic enamel paint over one coat of red oxide primer,complete all as specified and directed.

Supply and fixing of geyser Bolt 120mm Long with nut & washers, complete all as specified and directed

Servicing and overhauling of refrigerator of 165 to 200 ltr capacity of various make and model incl transporting to workshop & back complete.

Taking out the burnt/ unserviceable compressor from the refrigerator of 165 to 200 ltr capacity and supply & fixing the same as per the existing complete all as specified and directed.

M & L for replacement of thermostat for refrigerator of 165 to 200 ltr capacity complete all as specified and directed.

M & L for replacement of thermal relay for refrigerator of 165 to 200 ltr capacity complete all as specified and directed.

M & L for charging of refrigerant R134A and testing for proper cooling and leakage complete for refrigerator and deepfreezers of any capacity complete all as specified and directed.

Taking out the burnt/ unserviceable compressor from the refrigerator of 210 to 320 ltr capacity and supply & fixing the same as per the existing complete all as specified and directed.

M & L replacement of thermostat for refrigerator of 210 to 320 litre capacity complete all as specified and directed.

M & L for replacement of thermal relay for refrigerator of 210 to 320 litre capacity complete all as specified and directed.

Servicing and overhauling of defreezer of 210 to 400 ltr capacity of various make and model incl transporting to workshop complete all as specified and directed.

Taking out the burnt/ unserviceable compressor from the defreezer of 210 to 320 ltr capacity and supply & fixing the same as per the existing complete all as specified and directed.

M & L for replacement of thermostat for defreezer of 210 to 320 litre capacity complete all as specified and directed.

M & L for replacement of thermal relay for defreezer of 210 to 320 litre capacity complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece including old unserviceable geyser deposited to MES/EM store yard complete all as specified and directed.

M & L for painting to the outer surfaces of refrigerator of size 165 to 320 litre with two coats of synthetic enamel paint after cleaning the surface oil/dust free and making the surfaces smooth by filling putty where required, complete all as specified and directed.

M & L for repair to unserviceable/burnt stabilizer of 3 KVA to 5 KVA capacity, rewinding the same with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, reassembling, replacement of knobs, LED's etc. and making fully functional on load as connected to Refrigerator/Deep freezer/AC, complete all as specified and directed.

Description all as per ser item No 121 above but for stablizer of 1 KVA capacity complete all as specified and directed.

M & L for repair to unserviceable/burnt piller heater of capacity 1000/1500/2000 watt, single phase 230volts by replacing the heater rod,blower motor, switches including wiring etc, complete all as specified and directed.

M & L for painting the exhaust fan including louvers of size 300/450mm sweep with two coats of synthetic enamel paint after cleaning and making the surface of oil/dust free, complete all as specified and directed.

S&F in replacement PVC cable copper conductor multi strandrad flexible 23/.0076 twin core and making connections from ceiling rose to fan complete all as specified and directed.

S&F Fresh air fan motor of capacity 1/6 HP 230 volts, 50 Hz, AC supply suitable for 250/200 mm size Fresh air fan as per sample complete all as spd and directed.

Supply only exhaust fan motor capacity 1/4 HP 230 volts suitable for 230 mm size exhaust fan complete all as directed.

Repair /Supply and fixing Exhaust fan 300 mm sweep(steel Body) , 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all as specified and as directed.

S&F fresh Air fan 200mm sweep with louvers including connecting with suitable size of copper conductor from ceiling rose to fan complete complete all as specified and directed.

Supply and fix inner Steel tank for geysers of capacity 50 ltr as per existing of approved make complete all as specified and directed.

Supply & Fix inner Steel tank for geysers of capacity 25/35 ltr as per existing of approved make complete all as directed

Supply and Fix top cover for geysers (confirming to IS) suitable for any makes/capacity/type of geysers installed at site duly painted (spray) in two coats with enameled (Deco) paint of colour & shade complete all as specified and directed.

Supply and Fix bottom cover for geysers (Confirming to IS) suitable for any make/capacity/type of geysers installed at site duly painted (spray) in two coats with enameled (Deco) paint of colour & shade as directed complete with inspection plate in two pieces complete all as specified and directed.

S&F factory made epoxy powder coated Distribution Board SPN-12 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp rated copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one SPN- MCB 25/40 Amp as incomer and 10 SP MCBs outgoing complete all as specified and directed conforming to IS : 8623.

S&F factory made epoxy powder coated Distribution Board SPN-8 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp rated copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one SPN- MCB 25/40 Amp as incomer and 10 SP MCBs outgoing complete all as specified and conforming to IS : 8623.

S&F MCB SP 6-32 Amps 240 volts curve 'C' series 10 KA 50 HZ complete all as specified and directed.

Supply & Fix MCB SPN 40- 63 Amps, 240 Volts, 10 KA capacity C' curve .

Disconnecting the electric supply from the mains, transporting the window/split type air conditioner 2.0 Ton capacity from original location to workshop to carry out the servicing complete and re-fixing at the original position after repairs and making the ACs fully functional and testing for satisfactory working, complete all as specified and directed.

M/s Bashir Enterprises (BID ID -3452670)

M/S GHULAM HASSAN KUCHAY (BID ID -3452460)

ghulam mohd (BID ID -3452194)

M/s Nasir Rasool Dar (BID ID -3449393)

M/S M.Y Enterprises (BID ID -3457349)

M/S Noor Mohammad Shalla (BID ID -3449013)