Renewal of Sizar Dam Top Road From km 0.670 to km 2.000 (Lot-6)

Amount

WBM Grading 2 Providing, laying, spreading and compaction stone aggregates of specific sizes to Water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 Kn static roller in stages to proper grade and camber, applying and brooming, stone screening/ biding material to fillup the interstices of course aggregate, watering and compaction to the reqiured density Grading 2 as per MORD Technical Specification Clause 405

WBM Grading 3 Providing, laying, spreading and compaction stone aggregates of specific sizes to Water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 Kn static roller in stages to proper grade and camber, applying and brooming, stone screening/ biding material to fillup the interstices of course aggregate, watering and compaction to the reqiured density Grading 2 as per MORD Technical Specification Clause 405

Brick edging on both sides of the road of first class bricks 8 cm (3'')wide and 12 cm. 4.5" deep laid with mud mortar including labour and supply of bricks finished to required template and proper alignment and also including dressing and ramming the excavated earth as directed by Engineer in charge.

Providing and applying prime coat with bitumen emulsion (Slow Setting) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen (V.G.-10 Gr.) using Bitumen distributor at the rate of 0.25-0.30 kg per sqm on the prepareddry and hungry bituminous surface ( treated with Primer) cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using bitumen (VG-10 Gr.) grade bitumento required line ,grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of "Type-C" as per Technical Specification Clause 508.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified level , grade and cross fall using Type "C" as per Technical Specification MORD specification no. Clause 510 .

Supply and fixing of sign board including labour, materials and all T&P with cutting , welding where necessary for proper completion of work.

M/S KAVYA CONSTRUCTION