SUPPLY OF WATER QUALITY TESTING GOODS/EQUIPMENT

Amount

Gas Chromatograph Mass Spectrometer (GCMS)*

Induced Coupled Plasma Mass Spectrometer (ICP-MS)*

Rotary Evaporator with Vacuum Pump & Chiller

Microwave Digestion System

Description of Work / Item(s)

Amount

A) Gas Chromatograph Mass Spectrometer (GCMS)* and Rotary Evaporator

Installation and demonstration of full operation of the equipment free of cost.

Furnishing of detailed operations and maintenance manual for each appropriate unit of supplied Goods free of cost.

Comprehensive Annual Maintenance Charges (CAMC) after completion of Five-Year Standard Warranty period:

1st Year CAMC Price

2nd Year CAMC Price

3rd Year CAMC Price

Training for 2-3 persons for a week (twice) within a gap of six months for operation and maintenance at installation site free of cost.

Training for 5-10 persons for 2-3 days in respective organization for operation and maintenance etc (2 nos during warranty Period and 1 no during AMC period)

Supply of consumables along with instrument at the time of delivery:

a) Filament, high temperature EI for GCMS

b) Septa Non-Stick BTO Inlet 11mm 100 pk

c) Septa Non-Stick BTO Inlet 11mm 50 pk

d) Graphite O-ring for splitless, 10/pk

e) Liner, UI, split, straight, Glass Wool, 5/pk

f) Liner, UI, splitless, single taper, GW, 5/pk

g) Ferrule, 0.5mm VG 0.32 col 10/PK

h) Ferrule, 0.4mm Vespel 0.1-0.25 col 10/PK

i) Ferrule, 0.5mm Vespel 0.32 col 10/PK

j) Column nut, Inlet/ Detect

k) Glass wool, silane-treated, 50 grams

l) Auto sampler clear vials with cap and septa (100 Nos.)

m) Column: DB-5MS 30m, 0.25mm, 0.25um

n) Column: CP-Wax 51 for Amines 25mx 0.25mm x 0.2um

o) Column: DB-5 30m, 0.25mm, 0.25u

p) Column: DB-1MS Ultra Inert 30m, 0.25mm, 0.25um

q) Syringe, 5.0 uL FN 26 g bevel tip

r) Auto Sampler Syringe

s) Syringe, 10ul PTFE tip, FN 23-26/42/HP

t) Electron multiplier horn, high gain

u) PFTBA sample, 10 g

v) Heater/Sensor Assembly

w) Split vent trap PM kit, single cartridge

B) Induced Coupled Plasma Mass Spectrometer (ICP-MS) ans Microwave Digestion System

Installation and demonstration of full operation of the equipment free of cost.

Furnishing of detailed operations and maintenance manual for each appropriate unit of supplied Goods free of cost.

Comprehensive Annual Maintenance Charges (CAMC) after completion of Five-Year Standard Warranty period:

1st Year CAMC Price

2nd Year CAMC Price

3rd Year CAMC Price

Training for 2-3 persons for a week (twice) within a gap of six months for operation and maintenance at installation site free of cost.

Training for 5-10 persons for 2-3 days in respective organization for operation and maintenance etc (2 nos during warranty Period and 1 no during AMC period)

Supply of consumables along with instrument at the time of delivery:

a) Ion lenses or equivalent

b) Plasma Torch

c) RF Coil or equivalent accessory

d) Injector Quartz Torch

e) Spray Chamber

f) Skimmer Cone (Ni and Pt)

g) Sampler Cone (Ni and Pt)

h) Tubing for sample introduction, drain and internal standard

i) Nebulizer

j) Hyper-skimmer Cone/ Extraction System for high matrix and higher sensitivity / ion lenses

k) Rotary pump oil packets should be provided for complete warranty period of operation.

l) Chiller Coolant should be provided for complete warranty period of operation.

m) Screw/Nut/Spaces/ O ring for ICP-MS

n) Shield Torch

The following additional spares should be supplied along with the system: (a) Torch kits- 2 nos; (b) Alumina Injector- 2 Nos (c) Quartz Injector – 1 nos (d) Sapphire injectors- 1 Nos ( e) Spare nebulizer/spray chamber – 2nos; (f) Sample introduction kit. 1-nos (g) Auto Sampler Tubings – 24 nos . inclusive of all parts. Vendor should supply suitable Chiller re-circulator of appropriate capacity along with the system with warranty of minimum 5 years. Air compressor and purification panels for argon and nitrogen should be included. The vendor should take care of the installation of ducting from the gas cylinders to the instrument. Hydride generator kit should be included for hydride forming elements like As, Hg, Se. Suitable Fume exhaust system should be included.