nit100

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in lead of 50 mtr. All kinds of soil. Hard rock (requiring blasting) useful material 30 %

from 18 m to 30.00 m BGL

recovery of hard rock usefull material 30%

Add extra over item no. 2.39. 2-4 for every additional lift of 1.5 mtr or part thereof in ordinary rock and hard rock in ordinary rock and hard rock

from 18 m to 19.50 m BGL

from 19.50 m to 21.00 m BGL

from 21 m to 22.50 m BGL

from 22.50 m to 24.00 m BGL

from 24 m to 25.50 m BGL

from 25.50 m to 27.00 m BGL

from 27.00 m to 28.50 m BGL

from 28.50 m to 30.00 m BGL

Add 20% extra over item 2.39 for excavation in saturated soil where pumping or bailing out of water is required including shoring strutting where required and dewatering

from 18.00 m to 30.00 BGL

Labour Charges for horizontal boring 100 mm dia in open well in rockey strata with all type of rock cutting and drilling tools etc. including all T&P required for job including dewatering arrangement.

RCC GLR

B-4 4.2 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M20 grade Nominal Mix / Design Mix

B-4/ 4.13.2 STEEL REINFORCEMENT: Providing and Fabricating Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Hot rolled deformed bars (IS : 1139).

B-4/ 4.9 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc.

B-4/ 4.10.1 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Walls (any thickness) including attached pilasters, buttresses plinth and string course.

B-9/ 9.8.1 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

B-9/ 9.12.1 Providing and fixing 1mm thick M.S. sheet garrage door shutters with frame of 40 x 40 x 6mm. angle iron 3mm M.S. gusset plates at the junction and corners including all fittings and applying a coat of approved steel primer : (Excluding cost of frames) Using M.S. angles 40 x 40 x 6mm for diagonal braces.

B-12/43.1 Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding : New work (Two or more coats applied @ 3.84 kg/10 sqm).

B-12/ 12.48.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

B-12/ 12.66 Lettering with black Japan paint of approved brand and manufacture.

S-2/ 2.2.1 P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. 15mm dia nominal bore 'B' Class

S-2/ 2.2.6 P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. 50mm dia nominal bore 'B' Class

S-2/2.8.1 P & F Stop Cock (IS :8931 Mark), superior quality & of approved make: Brass 400 gm. 15mm nominal bore.