REPAIR TO JOINERY, PLUMBING, SANITARY FITTINGS, TILING, WALL PANELLING AND OTHER MISC WORKS IN ZONE IV UNDER AGE B/R-IV OF GE (SOUTH) MEERUT CANTT

Amount

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutters without taking off shutters from the frame, complete all as specified and directed.

Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutters without taking off shutters from the frame complete all as specified and directed.

Taking down of shutter of any description exc. 1 Sqm & not exceeding 2 Sqm each complete all as specified and directed .

S&F factory made pressed steel frames, conforming to IS, having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate of suitable size & specification etc, complete, as specified, supplied and fixed complete all as specified and directed.

S&F factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate of suitable size & specification etc, complete, as specified, supplied and fixed complete all as specified and directed.

S&F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick complete all as specified and directed.

M&L for gauzed shutter made out of box section with outer and locked frame of size 60mmx35mm (medium grade). The shutter shall be of pressed steel including fixing of 10 mm Square gaurd Bars (06 Nos in Horizontal direction & 05 Nos in Verical direction complete with & including fly proof wire mesh having 0.63mm nominal dia wire and 1.40mm average width of aperture including two coats of synthetic enamel paint over a coat of red oxide primer including one sliding door bolt , handle and tower bolt of suitable size & specification complete all as specfied and directed.

S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm complete all as specified and directed.

S&F aluminium anodized handle of size 200 mm complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

M&L for powder coated aluminium door shutters without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, Hydraulic of suitable size including powder coated aluminium frame with one or more rebates including S&F 5 to 6 mm thick black glass complete all as specified and directed.

S&F powder coated anodised aluminium windows sliding type (3 shutter type)/ Side hung type as per site requirement or directed by engr-in-charge with sash bars, aluminium frame sections weighing not less than 0.55 Kg/mtr and shutters section weighing not less than 0.35 Kg/m incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles of suitable size including powder coated anodised aluminium frame, with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed.

S&F Steel windows box type using 'P' section comprising double frame for gauge and glazed skelton shutter jointly with flat iron 40x3mm complete including hinges, handle, tower bolts, stops, lugs etc of suitable size and specification complete all as specified and directed. Note:- (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongreries. (iii) gaurd bars glazing & Wire mesh shall be measured and paid for separately.

S&F steel ventilators fixed type with glazing bars complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing shown in SSR Part-II (2020). complete all as specified and directed.

S&F Stainless steel butt hinges 100mm in size complete all as specified and directed.

M & L for Hacking out old broken glass ( any thickness, size, quality or discription) from wooden frames fixed with pin, beading or oil putty complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

S&F figured glass, 3 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed.

M&L for repairs to anodised aluminium door shutters and make it serviceable condition including necessary joining cleats, glazing clips,glass, ruber neoprene packing, snap beading, screws including replacing the galss panel/glazing, complete all as specified and directed.

S&F Hollow PVC Wall Lining consisting of 6mm thick plain colour PVC sheet duly fitted into the wall and Thickness of insulated PVC wall lining 1 to 3 mm thick mm with Single Side Prelam PVC sheet used instead of plain colour sheet complete all as specified and directed including dismantling of old wall panelling complete all as specified and directed.

Material & labour vitrified coloured tiles of size 1200x 600 x 8 to 10mm thick, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles complete all as specified & directed.

Material & labour vitrified coloured tiles of size 1200x 600 x 8 to 10mm thick, coloured, as in skirting set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15mm thick rendering of CM (1:4) including Dismantling of old tiles complete all as specified & directed.

Material & labour non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including dismantling of old tiles complete all as specified & directed.

Material & labour for glazed coloured ceramic tiles of size 600x300x8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:6 including dismantling of old tiles complete all as specified & directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortar etc complete all as specified and directed.

M&L for 14 to 16mm thick Udaipur Green Stone, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

M&L Machine cut kota stone slab flooring not less than 15mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over & including15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as item No 31.00 here-in-before factory made bull nosed as in riser of steps, skirting/dadolaid over & including 10mm thick in cm 1:4 complete all as specified and directed.

M&L PCC 1:3:6 type C1 , 75 mm thick (20 mm graded stone aggs) as in plinth protection including finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:4), complete all as specified and directed.

M&L rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja in cement mortar (1:3), complete all as specified and directed.

M&L three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified and directed.

Material & Labour in repair to 18/19 mm thick WPC board, interior grade, commercial type fixed with nails to timber frame work as in cupboard shelves, kitchen, cupboards etc as in repair complete all as specified and directed.

Material & labour in preparation of old white wash surfaces and applying one coat of white wash on ceiling complete all as specified and directed.

Materials & labour for prepration of old plastered surface and applying one coat of Oil Bound distemper complete all as specified & directed.

M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O complete all as specified and directed.

S&F Galvanized MS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and including fixed with wooden beading for securing wire gauge with wire stappler complete all as specified and directed.

S&F as in repair Galvanized MS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and including fixed with wooden beading for securing wire gauge with wire stappler complete all as specified and directed.

M&L preparation of New wall plaster surfaces and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

Material and labour for repairing of old wooden doors by repairing projecting/friction type hinges,handle, bolts etc as required and providing new as required complete all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20mm greded stone agg) for hold fast pressed steel frame etc complete all as specified and directed.

M&L for anodised aluminium partition with/without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings, including anodised aluminium frame with one or more rebates including S&F 5 to 6 mm thick glass or board as per the site requirements all fixed to frame complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site. complete all as specified and directed.

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site.

Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors ,testing complete all as specified and directed.

Supplying and laying of Hot and Cold CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors, testing complete all as specified & directed. complete all as specified & directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls etc. 75mm bore as in waste and rain water pipes including stack clamps made out of 25mm by 5mm flat iron and 16mm dia round iron stays including bolts & nuts, laid complete all as specified and directed.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls etc. 110 mm bore as in waste and rain water pipes including stack clamps made out of 25mm by 5mm flat iron and 16mm dia round iron stays including bolts & nuts, laid complete all as specified & directed.

Supply & fixing in rotational moulded polyethylene water storage tanks 500 liters capacity three layered, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

S&F as in repair 15mm bore pillar tap, long shank, swan neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed.

S&F as in repair 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union. complete all as specified and directed.

S&F in repairs 15 mm bore Bip tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms/20mm-125gms) complete all as specified and directed.

S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc, set with concrete and making good to floor complete all as specified and directed.

Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed.

S&F in repair chromium plated Jet spray with suitable flexible pipe to EWC for 15mm bore with fittings, complete all as specified and directed.

S&F in repair chromium plated hand shower with 1.00 mtr flexible pipe for 15mm bore with fittings, complete all as specified and directed.

Supply & fix in repairs PVC connections of 600mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply & fixing rotational moulded polyethylene water storage tanks 1000 liters capacity three layered, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

S&F in repair 20mm Float valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) complete all as specified and directed.

S&F in repair 25mm Float valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) complete all as specified and directed.

S&F in repair brass spindlle of No 2/3/4 for CP bib taps/angle cock/pillar taps etc complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified and directed.

Supply & fix in repair wall mixer brass chromium plated for mixing hot and cold water screwed for iron pipe uitable for 15mm bore pipes with crutch complete all as specified and directed.

S&F in repair mortise lock including necessary arrangements for removal and fixing complete all as specified and directed.

S&F for 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A cagegory with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge.

S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other farmes/chowkhat of size45x85mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (including MS hold fast) complete all as specified and directed. Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L non skid coloured tiles of size 600x600x7-8mm thick, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) inlcuding dismantling of old tiles complete all as specified and directed.

M&L non skid coloured tiles of size 600x600x7-8mm thick, coloured, as in skirting set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15mm thick rendering of CM (1:4) including dismantiling of old tiles complete all as specified and directed.

B K CONSTRUCTION (BID ID -3432478)