Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.6 LAccepted-AOC VPO SAKRALI TEHSIL NABHA DISTRICT PATIALA | NABHA | PATIALA | PUNJAB | L1 | Accepted-AOC Rates are Reasonable |
Tender Value
₹5.6 L
EMD Value
₹11,200
Closing Date
26 Dec 2019, 5:00 pmClosed
EXECUTIVE ENGINEER, DIV.NO.1, PATIALA
Chairman GPWSC Village Mangewal o/o EXECUTIVE ENGINEER, WATER SUPPLY AND SANITATION DIV.NO.1, PATIALA
Providing Improved Access to Water through Household connections in existing Water Supply Scheme Mangewal of Block-Nabha, Distt. Patiala under sub-component 2a (i) of Punjab Rural Water and Sanitation Sector Improvement Project.(DWSS-W-DIV66-5964-1)
2019_WB_41990_1
E-Tender-21/WSSD/Div.No.1 Patiala/EE/2019-20
Open Tender
Civil Works
Item Rate
30 days
Mangewal, Block Nabha
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,000
Yes
TIA
₹11,200
Yes
8 Oct 2020
16 Dec 2019
27 Dec 2019
16 Dec 2019
26 Dec 2019
16 Dec 2019
Amount
Pumping Machinery
Providing Submersible Motor and pump 12.50 HP with 81 mtr head
Providing Submersible cable 6mm2 Finlolex make
Providing and lowering MS lowering pipe Jindal B-class 80mm
Labour for lowering submersible motor and fixing of electric control panel
Repair of Panel Board, HRC fuse, ELCB, CT Connector, MCB, RCCB, Single phase perventer complete in all respects as required Engineer-in-charge.
Repair of Pump Chamber
White washing (two coat)
Painting two coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.
With special quality paint
Distempering with dry distemper of approved manufacture two coats over one priming coat to give an even shade.
Applying Pink Primer or-aluminium priming coat including preparation of surface With special quality paint
Painting two coats excluding priming coat with ready mixed paint in all shades on new wood work With special quality paint.
Applying priming coat with methal primer on new steel or iron work incluing preparation of surface and Painting two coats with ready mixed paint for metallic surfaces in all shades on steel or iron work with special quality paint.
Finishing wall with exterior decorative cement based paint such as snowcem robbiacem etc. on new work in two coats to give even shade. Quanity as per Sr. No. 17 Marked “C”
Hollock wood doors shutter windows including Hinges, Screws, Chocks Cleats, Stops and Cords etc. complete fixed in position (double Leaf) @ Paneled glazed or glazed and paneled
Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.
Glass panes 4mm thick above 0.40 sqm area.
Repair of Tile Terracing
Repair of Pump Chamber Plinth
P/F Electric Fan & Tube ISI Marked equivalent to Crompton
Repair of RCC OHSR
One No. RCC OHSR 50000 ltrs capacity having height 20.00 mtr up to FSL and 18.00 m upto bottom slab has been already exists at site. The Repair of OHSR has been taken in this estimate.
Painting of C.I Pipes and Specials complete in all respects
Repair of expansion joint
Relacement of CI Sluice valve
P/F Ventilation Mesh
Repair of leakage of OHSR
Cleaning of OHSR from inside with soidum hyprochloride complete in all respect.
Water Works
Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing D-6 & 8 (as per Analysis A-6)
Uprooting and leveling of water works site upto 15 cm (i.e. cutting of grass and plants, watering of plants & flowers etc)
Relacement of CI Sluice valve
Construction of foot paths with masonry toe wall& earth filling inside water works as per standard drawing D-10 & Analysis of Rates A-11 complete in all respects.
Providing & fixing angle iron pickets with angle 40mm x 40mm x 6mm including cost of concrete & painting complete in all respects as per standard Drawing.
Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7
Providing, installing, testing & commissioning of one No. Electronically actuated, Diaphragm Operated, Metering system, Chemical Doshing Chlorinator, suitabel for delivering 0.5 to 6 Liters of Bleaching Powder Solution/ Sodium Hypo solution per hour under maximum delivery pressure upto 7 kg.cm2, and suction lift not less then 1.5, as per DWSS standard specifications.
Repair and Removing of leakage in existing pipe lines including earth work, bailing out water and with material such as PVC Pipe, Tee, Bend & CI D-joints complete in all respects.
Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.
Providing proposed water connection to house hold up to wall with providing, laying jointing, testing MDPE pipe lines 15mm i/d=2.00 mtr & G.I. Pipe lines 15mm i/d = 2.50 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete (On Existing Pipeline)
Providing & fixing PVC Pipes & Specials 6Kg / cm2 including cost of earth work in excavation & back filing complete.
Dismantling of cement concrete 80mm thick cement concrete 1:2:4 over 100mm thick C.C. 1:8:16 and making good the same to its original condition complete in all respects.
Dismantling of matalled road with Bithminous course 50 ti 75 mm thick with base course complete in all respects.
Providing proposed water connection to house hold up to wall with providing, laying jointing, testing MDPE pipe lines 15mm i/d=2.00 mtr & G.I. Pipe lines 15mm i/d = 2.50 mtr including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete (On Proposed Pipeline)
Painting & Printing of sign board as per DWSS Specifications.
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .