NIT NO.4(M6)ITEM NO. 21

Disconnection of Electric connections of motor from panel to starter and motor after dismantling of old starter & associated cables with the help of manual labor, tools and tackles as required at site taking all safety measures.

Decoupling the pump and motor after removing the tyre coupling by opening of the nuts, bolts etc. The job includes dismantling of suction and delivery side sluice valve, NRV, taper, bends etc. as per site requirement and then taking them to a suitable place in the pump house.

Dismantling the pump set from the MS Base frame by cutting of nut & bolts with the help of gas cutter, tools & heavy labor as required at site and taking outside pump house.

Dismantling of MS base frame from CC foundation by cutting of foundation bolts with the help of gas cutter and taking out with the help of heavy manual labor & taking all safety measures as required at site.

Modification of existing base frame suitable for pump set with the help of welding work & material as required after that making of cement concrete foundation suitable for the P/set with all material like cement, concrete, sand, etc. i/c supply and grouting of foundation bolts etc. as required.

Renovation of existing panel by replacement of suitable size contactors, overload relay, panel wiring, phase sequence relay, timer, defective meters, mccb, mcb by proper thimbling and taping etc. as per site requirement

Supply of PVC insulated copper flexible conductor single core 25 sq.mm flexible cable, 1100 volts. Make: Havells/ Grandlay/ Gloster/ Kalinga/Ploycab

S/o Nut bolts with washers of good quality.

Supply of 50% neoprene rubber packing of suitable size as per site requirement. Make: Jyoti/ Worth

S/O Pressure Gauge having dial size of 100 mm dia. with all accessories of pressure gauge socket, bush etc. per site requirement. Make: - H. Guru/ Fibeig/ approved by DJB

Repairing/ varnishing of charging set as per site requirement

Installation of 50HP motor P/set (to be provided by department), providing & fixing of coupling and coupling guard and other E&M equipment along with all piping work & making, providing and fixing of specials like Bends, Tee, reducer, flanges etc. as required at site & fixing of valve, and executing all allied E&M and civil work, laying of cable as per site requirement, making connection with thimble panel board by taking all safety precautions, arranging all tools and tackles i/c welding set gas cutter etc. as per site requirement.

Testing & commissioning of motor P/set i/c above all E&M equipment first at on No-load and then on full-load condition.

Transportation charges for man & Material including loading/ Unloading etc. as per site requirement at a suitable place as per direction of engineer-in-charge.

Repairing of existing shutter door at the above said site and providing / fixing of UGR ventilation jali with its iron Frame cover

Goodwill Enterprises