Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.3 LAccepted-AOC HOUSE NO 15E ROAD NO 12 RAJENDRA NAGAR PATNA BIHAR 800016 | PATNA | PATNA | BIHAR | 800016 | L1 | Accepted-AOC ok | |
| 2 | L2₹35.6 L+₹11.4 L (46.9%)Rejected-Finance 0 0 BASANT AVENUE PHASE II PUNJAB GURDASPUR PUNJAB 143505 | GURDASPUR | PUNJAB | 143505 | L2 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
3 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bihta
GE (AF) Bihta PIN 801103
Addition/alteration to living in accommodation of SNCOs at AF Stn Bihta under GE (AF) Bihta
2022_MES_516633_1
8217/BHT/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Bihta
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) Bihta
₹50,000
Yes
5 Jul 2022
5 Apr 2022
7 May 2022
5 Apr 2022
3 May 2022
19 Apr 2022
60 days
Amount
Taking down or up 15 mm bore galvanised iron tubing and connection including cleaning for refixing or removal all as specified.
All as per item No 1 here in before but 20 mm bore of pipe.
S & F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.
All as per serial item 3 here in before but 20 mm bore of pipe
Supply & fixed in repairs 20 mm bore brass ball valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.
S & F in repair 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
S & F in repair of chromium plated fency type stop valves cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore.
S & F in repair of chromium plated concealed type stop valves cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore.
S & F in repair of chromium plated 125 mm long shower rose with or without swivel joints, any size, incl fixing to steel pipe or union as in repairs.
S & F in repair of 15 mm bore chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.
S & F in repair of PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality.
S&F in repair of soap Dish brass chromium plated decorative type approximate size 160x160x90mm complete all as specified and as directed.
S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with wall.
S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor.
S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make.
S&F in repairs of vitreous china wash hand basin, white, flat back of size 630 x 450 mm including waste coupling, CI brackets, PVC waste pipe and connection 32 mm bore complete all as specified and directed by Engineer-in-Charge.
S&F in repairs 15mm bore pillar taps, Fancy type, cast copper alloy with capstan heads, Decorative type chromium plated screwed down, high pressure screwed for iron pipe complete all as specified.
S&F in repair rotational mouleded polythene water storge tank white colour triple layer (Cylindrical vertcal closed top) hoisted and fixed in position all as specified of 500 ltr capacity include dismandling old water tank and remove from site Make :- SINTEX and equivalent
S & F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement etc complete as directed.
Dismantling existing cast iron soil vent pipe of any dia, fixed to wall laid in trenches incl all fitting & accessories.
S & F 100 mm dia spun cast iron soil waste and vent pipes sand cast in any length with or without laid in trenches or in floor with cement joints.
S & F 75 mm dia spun cast iron soil waste and vent pipes sand cast in any length with or without laid in trenches or in floor with cement joints.
S & F in repairs of 100 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured).
S & F in repairs of 75 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured).
Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed
Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site all as specified and directed
Taking down of shutters of any description exc 1.00 Sqm but n. exc 2 Sqm each
S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge Make: RAJSHRI/SINTEX)
S & F for 30 mm thick factory made solid panel PVC door shutter conferming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-inCharge Make : RAJSHREE/SINTEX
S & F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete as specified.
M & L for PCC 1:3:6 type C1 as in filling back side of pressed steel door frames.
S&F 35mm thick second class hardwood glazed and skeleton shutters open rebates and prepared to receive glass, gauge (without sash bars) edges of frame chamfered or rounded fitted with cut and mitered beads, for securing glass/gauge etc sizes of members of shutters as specified in SSR Part - I, section 8, clause 8.24 (a) supplied and fixed to chowkats all as specified and as directed. Note:- Wire gauge/glazing to be measured and paid separately).
S&F factory made 40mm thick plain, framed, panelled shutter (two panel) with lock rail using 2nd class HW (Hollock) kiln seasoned andchemically pressure treated the size of rail and style as per IS 1003 (Part-I) and panel insert of 9mm thick BWP commercial facing plywood or 12mm veneered particle boards with commercial ply all as specified
S&F factory made steel ventilators with top hung shutter incl hinges steel pegs & stays complete with one shop coat of red oxide primer all as specified all as specified
S&F steel windows with side hung double shutters (inside guaze &out side glaze shutter) with pressed steel box type frame, including MS grill in between two shutters, box type hinges, with steel handles, steel peg stay complete with & without glazing bars, frame fixed with MS screw 100 mm dovetailed or welded including one shop coat zinc chromate primer complete all as specifed and as mentioned in TD drawing No:- CE/ALD/TD-172 sheet No 1/2 & 2/2 (PWE windows) PCC filling for window frame shall be measured and paid separately
S&F Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in 2nd class hardwood.
S&F 25 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides
S&F sheet glass 3mm thick ordinary quality & glazing with oil putty in square n.exc 0.5 Sqm in each pane.
All as per item Ser No 39 above but figured glass, pin head type n.exc 0.50 Sqm each pane
S&F mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm all as specified.
S&F for 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed.
S&F 300 mm long aluminium alloy, anodised, sliding dooor bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.
S&F 150 mm long aluminium anodised handles, cast type,
S&F mild steel 300 mm ordinary rat tail rod pattern springs including roller & rooler plate complete all as directed .
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm.
S&F for 100 mm long mild steel butt hinges, heavy weight cold rolled mild steel and fixed.
S&F for 75 mm long mild steel butt hinges, heavy weight cold rolled mild steel and fixed.
S&F 100 mm long aluminium anodised handles, cast type,
S&F 100 mm size hasp and stapple of aluminium anodised including bolt to hinge plate and fixed with screws.
Taking down cement plaster on brick or stone walls & chajja including raking out joint, hacking for key,scrubbing downwith water.
M & L for 10 mm thick rendering in CM (1:6) on vertical surfaces of brick walls finished even and smooth without using extra cement.
M & L for 5 mm thick rendering in CM (1:3) on ceiling surfaces of finished even and fair without using extra cement.
M & L 15 mm thick rendering in CM (1:4) on vertical surfaces of brick walls finished even and smooth without using extra cement with using water proofing compound (WPC will be measured and paid separately).
Supply only integral water proofing compound of approved quality.
M&L for new plastered surfaces of walls applying two coat of cement base paint over a coat of alkali resistant priming complete all as specified and directed.
M&L for complete removing of existing treatment of wall surfaces and applying two coat of cement base paint over a coat of alkali resistant priming complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash all as specified and directed.
M&L for preparation of old surfaces of ceiling and applying two coats of white wash all as specified and directed.
M&L new plastered surfaces of wall and applying two coats oil bound distemper over a coat of alkali resistant primer over a coat of approaved wall care putty all as specified & as directed .
M&L for complete removal of existing treatment of wall and applying two coats oil bound distemper over a coat of alkali resistant primer over a coat of approaved wall care putty all as specified & as directed .
M&L for preparation of old decorated plastered surfaces of wall and applying two coat of white wash all as specified and directed.
M&L for preparation of new wooden surfaces applying one coat of pink primer and two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described all as specified and directed.
M&L for old painted wooden surfaces and applying two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described all as specified and directed.
M&L for preparation of primer coated new steel surfaces and applying two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described.
M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint (ordinary tint) of any description, over 10 cm in width or girth, not otherwise described over one coat of red oxide primer.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.
M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed in cement mortar 1:6 all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L glazed ceramic coloured tiles of approved quality ISI marked (450 X 350 X 7 mm / 450 x 300 x 7 mm / 345 x 300 x 7 mm thick) as in vertical surfaces such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface all as specified and directed.
M & L Non-skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed 1:6 all as specified and directed.
S&F Harrison rail mild steel chromium plated of 19/20mm dia for curtain rod fixed with two Nos of brackets for each rail all as specified and as directed.
Dismantling of Brick tiles or terracing tiles, single layer on roofs
Dismantling of old textile or APP based roof coverings including frames (if any) and cover fillets (measured flat not girthed) and removing of mud etc complete all as specified and as directed.
Demolition of concrete of any description & in any position not otherwise specifically provided and removing debris outside MD Land.
M&L for providing cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as in roof padding, roof kerbs (rounded or chamfered on edge) etc all as directed.
M&L for providing, cement concrete type C1 1:3:6 (using 20 mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges.
M&L for rendering 10 mm thick of concrete surfaces built in cement mortor 1:4 with water proofing treatment. (NOTE :- WPC shall be measured and paid seperatelly).
Supply only integral water proofing compound
M&L for appling bitumen primer @0.30 Ltr/sqm all as specified and directed.
M&L for preparation of primer surface of roof and applying evenly a tack coat of hot blown bitumen 85/25 grade @ 1.2 Kg per Sqm complete all as specified and as directed.
S&F polymeric water proofing membrane consisting of 90 to 100 micron thick central core of HMHDP film & minimum weight 3 Kg/Sqm shall be laid with 100 mm side lap/end lap over hot bitumen on prepared surface all as per manufacturers instruction and under supervision of manufacutres technical representative complete all as specified and directed.
M&L for 40 mm thick brick tiles laid on bedding of 20 mm thick cement mortar (1:6) and joints grouted flush in cement mortar (1:3) on treated roof all as specified and as directed.
Taking down copper/aluminium point wiring (light, fan socket or power) complete fittings such as switches, sockets, ceiling rose, pendents, regulators etc complete as ordered and removing retrived materials and making good the disturbed surface of wall, floors, ceiling etc complete all as specified and directed.
Taking down carefully unserviceable sub main wiring of any size and type including making good the disturbed surfaces of walls, ceilings etc including two coats of white /colour washing/ distempering etc to match the existing complete all as directed by EIC.
Taking down carefully unserviceable distribution boards/metal enclosures of any type and capacity including wooden board and making good the disturbed surfaces of walls, ceilings etc including two coats of white/colour washing/ distempering etc to match the existing complete all as directed by EIC.
Material and Labour for wiring complete 1.5 sqmm FRLS grade single core PVC insulated, unsheathed, 1100V grade copper multistranded conductor drawn through and including rigid PVC conduit pipe on walls, surface on roofs and beam etc including PVC insulated copper earth continuity conductor 1.5 Sqmm cable connected to common earth dolly including steel terminal boxes made out of 1.6mm thick MS sheet concealed in walls with laminated sheet top cover 3mm thick for housing the switches, sockets regulators etc all as specified and directed for one switch/light/bell point controlled by one switch. (a) One light point or one fan point controlled by one switch with cable 1.5 sq mm.
(b) One bell/buzzer point controlled by one push button with cable 1.5 sq mm.
(c) One 2pin/3pin switch socket out let 5 amps on independent board. with cable 1.5 sq mm.
(d) One 5 Amps socket point on same board with other switches
All as per item No.06(a) above but wiring complete with cable 2.5 Sqmm for 3 pin 15 A socket outlet on independent board .
Material and Labour for switch piano flush type 5A, SP one way.
Material and Labour for switch socket combination 3 pin 5 Amps & 2 pin 5 Amps multipurpose flush type.
Material and Labour for switch piano flush type single pole one way 15 Amps.
Material and Labour for socket outlet 3 pin 15/5 Amps flush type.
Material and Labour for bell push flush type 5 A SP 240 V.
Material and Labour for bell (Ding-Dong) 230 volts, single pole .
Material and Labour for ceiling rose 3 terminals.
Material and Labour for electronic fan regulator 120 w 2 module rotary step socket type suitable for ceiling fan 1200 mm sweep.
Supply and fixing LED Tube light fitting 1 x 20 Watts 220 V, AC decorative box type with driver,, bipin holders, connector block etc.,including-1 No LED T8 tubular lamp with in built driver, complete with all accessories and including connecting up with 3 core copper conductor cableof suitable size between ceiling rose and fitting terminal complete including taking down old light fittings all as specified and as directed
Fixing only LED Tube light fitting 1 x 22/ 20 W any make , Surface mounted /industrial box type luminaire with CRCA body, pre- coated in white & pre- wired for LED tube, bipin holders, connector block etc.,including 20W -1 No LED lamp with in built driver, complete with all accessories and including connecting up with 2 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete including taking down old light fittings all as specified and as directed NOTE :(i) Cntractor is responsoble to taking down carfully working conditinable LED tube light fitting keepi in his safe custody ceaning and refixing the same after completiom of B/R works.
Supply and fixing exhaust fan, steel body AC single phase 230 V of size 300 MM sweep with blades and frame and lowers
S & F MCB SPN 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed. Make : Standard or equivalent.
S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed. Make : Standard or equivalent.
S & F Sheet metal enclosure SPN with a two pin and earth plug and socket complete with MCB SP 6-32 Amps including making good the disturbed surfaces to match the existing complete all as specified and directed. (for geysers)
Taking down Old U/S MCB DB SPN 8 Way, S & F MCB DB SPN 8 Way with 200 Amps rated busbar, Double door, 240 volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.
Taking down Old Unserviceable MCCB DB TPN, Supply and fixing Powerline Vertical DB, Double door suitable for TP/FP MCCB SKB as incomer, 4 Way, 415volts, flush to wall including Removing & Reconnecting existing wires/Cables,gland,lugs,cutting on wall and making good the disturbed surfaces to match the existing complete all as specified and directed. Make : Standard or equivalent in Havells/Indo Asian
Taking down unserviceable 125 Amps MCCB and Supply & Fix MCCB TPN 415 Volts 100 Amps rating with breaking capacity of 16 kA,fixed thermal & magnetic setting complete with making all connections as specified and directed.Make : Standard code - ISLGHF0125 or equivalent in Havells/Indo Asian.
M & L for sub main wiring complete with two runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 4 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.
Taking down ceiling fan, ceiling cable end,dismantling blades and carry out mnr repair and fixing of damaged parts like capacitor, bushes,bearings and screws etc required and keeping in safe custody of contractor up to re fixing in the same. All as directed by engr in charge.
Painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc (M&L)
Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan
M & L for Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized earth lead wire 4.0 mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified. NOTE: (i) The unit rate includes earth wire and protection pipe up to (maximum 7.5 metre from earth plate) earth point/test point. (ii) Earth pit shall be constructed at least 0.5 metre away from each earth chamber.
VIJAY ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .