Constt. of wash room/change room at stadium Bhadoo

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth for 1 meter from cutting edge and disposal of surplus excavated earth for 1 mt as directed by Engineer-in-charge.

All kinds of soil

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) (Including all leads and lifts carriages of material by MT/HL)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (Including all leads and lifts carriages of material by MT/HL)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level, 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)(Including all leads and lifts carriages of material by MT/HL)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level , Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)(Including all leads and lifts carriages of material by MT/HL)

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases for columns

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls under 20 cm wide

15mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

P/L of vitrified flooring tile in different size with water absorption less than 0.08% and confronting to IS 15633 of approved mark in all colour and shade laid on 20 mm thick plaster laid on 20 mm thick cement mortar 1:4 including grouting the joint with white cement complete. (60x60 cm)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and fixing 1mm thick MS sheet door with frame of 4040*6 mm angle iron and 3mm gusset plates at the junctions and corners, all necessary fittings complete including applying a primer coat of approved steel primer

Apply one coat cement primer of approved branding manufacture on wall surface

Painting with emulsion paint of approved brand and manufacture to give an even shade two or more

Providing and fixing white vitrous china pedestal type water closet ( European type wc pan) with seat and lid ,10 litre low level pipe with PVC flushing cistern including flush type with manually controlled device conforming to IS:7231 with all fittings and fixures, complete including cutting and making good the walls and floors where ever required.(make cera/equivalent)

Providing and fixing Pvc waste pipe for wash basin including pic waste fitting complete 32mm dia

Providing and fixing C.P brass angle valve For basin mixer and gyser points of approved make confirming to IS:8931. 15mm nominal bore complete job .(make jaquar/cera/equivalent)

Providing and fixing ball valve ( brass) of approved quality complete high or low pressure with plastic floats 15mm dia nominal bore

Providing and fixing G.I union in G.I pipes including cutting and threading the pipes and making long screws etc. complete (new work)

P/F brass bib cock of approved quality 15mm nominal bore

Long nose

Short nose

P/F wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the wall wherever required white vitreous china wash basin size 660 x 460 mm with single 15mm C.P. brass pillar taps with elbow operated levers ISI marked

P/F G.I. pipes complete with G.I. fitting and clamps, including cutting and making good the wall etc. 20 mm nominal bore ( external work ).

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall with 20 mm dia. nominal bore

P/F G.I. pipes complete with G.I. fitting and clamps, including cutting and making good the wall etc. 25 mm nominal bore ( external work ).

Making connection og G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including , cutting and threading the pipe etc. complete 25 to 40 mm nominal bore.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipe and fitting.(make cera/equivalent)

Providing and laying PVC soil waste pipe including bed concrete and all iround PVC pipe as per standard design 150mm dia (Prince, finolex, superme make of 4 kg / cm² pressure.

Providing and fixing PVC loose collar (surpreme / prince make).

Providing and fixing PVC plain bend (surpreme / prince make).

Providing and fixing PVC door bend (surpreme / prince make).

Cutting of holes in brick masonry / RCC slab / floor for passing pipes.

Brick Masonry 300mm x 300mm

Constructing bricks masonry manhole in cement mortar 1:4 mix RCC tob slab with 1: 2 : 4 : mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) in side plastering 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design inside 90 x 80 cm and 45cm deep including CI cover with frames (light duty) 455 x 610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg with FPS bricks with class designation 75.

Crushed stone aggregate

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without bent arm complete, including cost of cutting and making good the walls and floors.

(i) 100mm x 75mm

(ii) 100mm x 100mm

P/F white vitreous china flat back or wall corner type lipped front urinal basin of 430X260X350 mm .

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS: 8931

15 mm nominal bore. (Jaguar make code No.071)

Providing and fixing ball valve (brass) of approved quality complete.

20 mm dia. nominal bore .

25 mm dia

Providing and fixing gun metal non-return valve of approved quality ( screwed end )

32mm dia nominal

Providing and fixing PTMT extension nipple for water tank pipe, fitting of approved quality, colour and make (Prayag or equivalent).

32mm dia nominal

Providing and fixing PTMT shelf 440mm long 124mm width and 36mm height of approved quality & colour weighing not less than 300 grams.

Providing and fixing looking mirror of superior glass of size 600 x 450mm with plastic moulded frame of approved make and shade with 6mm thick hard board backing

Rain water pipe 110mm dia.

Providing and fixing PTMT soap dish.

Providing and fixing of 1 Horse Power Motor.

Providing and fixing PTMT towel rail complete brackets fixed to wooden cleats with C.P. brass screws with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, 78mm wide and effective height of 88mm weighing not less than 190 grams

Providing and placing on terrace (at all floors levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License nos.with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank (Sintex, Electroplast, Star, Lotus, or equivalent having valid ISI license).

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor singlecore cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthingthe point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group b

S/F PVC Conduit:- Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of Recessed conduit as required

Supply and fixing modular boxes, base cover plate : supply and fixing of following size

4 module (125mm*75mm)

P/F 1.50 sq.mm wire

Providing and making CIB of approved size by way of making another layer of 12 mm thick plaster with 1:4 cement mortar on front side outer plastered surface, painting and writings as per the direction of engineer in-charge including supply of materials, carriages all complete. L.M.R.

RAJIV SPOLIA

PEEYOOSH JEE RAINA