REPAIRS AND MAINTENANCE TO THE ARISIPALAYAM CORPORATION MIDDLE SCHOOL IN DIV-27, ZONE-1

Amount

Dismantaling the Damaged Pressed tiles & Weathering Course over Roof including all cost and conveyance etc.

Plain cement concrete 1:4:8 mix (One cement four m-sand and eight aggregate) using 40mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Supply and fabrication and placing in position of TMT steel roads to required size and length as directed by the departmental officers including cost of binding wire, cutting, bending and tying with proper position etc., including cost and conveyance of all materials to site and all labour charges etc., complete Complying with Standard Specification

Plastering with cement mortar 1:5 mix, 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications

Strucco plastering 12mm thick using HBBG chips of size 10mm and below over a base plastering with cement mortar 1:5 mix, 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications

Fabricating Supply and fixing and position of MS doors with double leave made out of 18 gauge M.S. sheet, outer frame 35x35x5mm angle, inner frame 25x25x5mm angle, cross stiffner with MS flat 25x5mm, altrop tower bolts 2 Nos. two handles and six holdfasts completed welded and rivetted and one coat of red oxide painting including cost of all materials and labour etc., complete

Plain cement concrete 1:2:4 mix (One cement two CS sand and four aggregate) using 20mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Finishing the top with Solar Reflectiv Ceramic Tiles of size 300 mm x 300mm x 7mm size laid in cm 1:3 mix mixed with water proofing compound as per Indian standard 2% by weight of cement used and pointed with the same mortar etc., complete

Plastering with cement mortar 1:3 mix, 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications

Dadooing walls with Ceramic tiles of size 20cm x 20cm x 6mm first quality design tiles of all colours laid in cement mortar 1:2 mix, 10mm thick and pointing with white cement using 0.40 kg/1m2 including finishing the joint and pointing flush with tile surface etc., complete

Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete and including necessary plaster of paris putty wherever required

Painting two coats with best synthetic enamel paint of approved Colour for new iron works the rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with standard specification(paint should be got approved by the Departmental Engineer befor use on work.

Painting two coats with best synthetic enamel paint of approved Colour for Old iron works the rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with standard specification(paint should be got approved by the Departmental Engineer befor use on work.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 80mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC.unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and celiling with PVC accessories and with TW switch box and5 A.FT switch withinflush with wall, covered with hylum sheet of 3mm with painting of suitable colour for open PVC light point. (SD.No.21)

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC.unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and celiling with PVC accessories and with TW switch box and 5 A.FT switch withinflush with wall, covered with hylum sheet of 3mm with painting of suitable colour for open PVC fan point. (SD.No.21)

Supply and fixing of 5A 3-Pin and 2 Pin combined flush type wall Socket with 5A flush type Switch on Suitable T.W. box SD (10)

Wiring with 2 x 1.5sq.mm(22/0.3) PVC insulated unsheathed Sc.Cu.conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non inter locking CS plug with painting of suitable colour with continous earth wire connection of 14 SWG TC wire for open PVC Power plug point etc, complete. (SD.NO.39)

Supply and fixing of 1200mm 48’ AC ceiling fan complete with regulator with 300mm draw down rod on the existing clamp etc., (SD.No.106)

Supply and fixing of 4' 18W Crystal Glass LED Tube Light fitting complete with T.W. round blocks on wall or ceiling with flu tube with PVC unsheathed leads from terminal to the fitting.

Supply and Fixing of the Following Pipes and Specials etc., Complete.

110mm Dia PVC Pipe

110mm Dia PVC Bend

110mm Dia PVC Clamp

Painting two coats with best synthetic enamel paint of approved Colour for old wood work the rate is inclusive of all materials, brushes and scaffolding charges etc., complete complying with standard specification(paint should be got approved by the Departmental Engineer befor use on work.

Sri Aurobindo Associates (BID ID -1154040)