NIT NO:- 46 /RMC/ZONE 08/2026 RAIPUR DATED– 12.10-2026

FINAL ABSTRACT OF DETAILED ESTIMATE OF PROPOSED CONSTRUCTION OF BUILDING FOR STATE LEVEL SHELTER HOME ( FOR THIRD GENDER ) AT SANT RAVIDAS WARD , WARD NO - 70 , SARONA , DIST .- RAIPUR (C.G.)

[ As per P.W.D. - Building S.O.R. In Force From 15-04-2026 ]

S/NO ITEMS NOS RATE IN RS AMOUNT

1 GROUND FLOOR 1NOS Estimated 4234000.00

Total 4234000.00

Add 18% for G.S.T. Charges 762120.00

Grand Total 4996120.00

[ Rs. FORTY NINE LACS NINETY SIX THOUSAND ONLY ]

ABSTRACT OF DETAIL ESTIMATE OF PROPOSED CONSTRUCTION OF GROUND FLOOR PLAN FOR BUILDING FOR STATE LEVEL SHELTER HOME ( FOR THIRD GENDER ) AT SANT RAVIDAS WARD , WARD NO - 70 , SARONA , DIST .- RAIPUR (C.G.)

(GROUND FLOOR )

[ As per P.W.D. - Building S.O.R. In Force From 15-04-2026 ]

S.N PARTICULAR’S NOS. LENGTH (in mtr.) WIDTH (in mtr.) DEPTH/ HEIGHT (in mtr.) QUANTITY UNIT RATE AMOUNT

1 Earth work in Excavation

Excavation for all types and sizes of foundation, trenches and drains or for any other purpos including disposal of excavated stuff upto 1.5 m lift and upto 50 m (at least 5m away from the excavated area), including dressing and leveling of pits.Page No.10,Item No.1.1.1(i)In all types of soil

Below g..b. horizontal 2 3.70 0.30 0.20 0.44 5.85

Below g..b. vertical 5 3.00 0.30 0.20 0.90

Extra for every additional lift of 1.5 m or part thereof . All types of Soil. Page No.10,Item No.1.6.1

2 P.C.C. Base Conc.

Providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation,plinth and at ground level excluding cost of form work. Page No.21,Item No.3.1.2 (ii)1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size).

column footing :-

Below g..b. horizontal 2 3.70 0.30 0.10 0.22

Below g..b. vertical 5 3.00 0.30 0.10 0.45

Below Steps 1 4.60 1.00 0.10 0.46

(iii)1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40mm nominal size).Page No.21,Item No.3.1.3(iii)

Kitchen area 1 4.00 3.60 0.10 1.44

Providing and laying nominal mix reinforcement cement concrete with crushed stone aggregate using concrete mixer in all work upto plinth level excluding cost of reinforcement and form work. Page No.21,Item No.3.2.1(ii)1:1½:3 (1 cement : 1½ coarse sand :3 graded stone aggregate 20mm nominal size).b) M-20

column footing :-

Below g..b. horizontal 2 3.70 0.20 0.40 0.59

Below g..b. vertical 5 3.00 0.20 0.30 0.90

Extra for laying PCC/ RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Page No.21,Item No.3.4

Lintel Beam horizontal 2 3.70 0.20 0.20 0.30

Lintel Beam Vertical 2 4.30 0.20 0.20 0.34

Slab beam Horizontal 2 3.70 0.20 0.40 0.59

Slab beam Vertical 5 3.00 0.20 0.30 0.90

Stair Case Upto 3.6m Height

Providing and placing in position reinforcement for R.C.C work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation & plinth all complete:thermo Mechanically treated steel bars FE 500D Page No.22, Item No.3.12.2

(a)Footing taking 26.73 40 Kg/Cum. 1069.32

(b)Column taking 17.56 110 Kg/Cum. 1931.16

(c)Beam taking 30.89 150 Kg/Cum. 4633.50

(d) Slab taking 36.31 100 Kg/Cum. 3630.90

5 Centering & Shuttering

a Providing and fixing formwork ncluding, shuttering, strutting,staging, propping bracng etc. complete and including its removal at levels, for: Page No.15,Item No.2.1.1 (i)Foundation, footings, bass of columns and plinth beam in any. Shape and size

g..b. horizontal 2 3.70 -- 0.80 5.92

b (vi) Columns,pillars Piers and likes-rectagular or square in shape Page No.15,Item No.2.1.5

c (ix) Beams,lintels,cantillevers & walls Page No.15,Item No.2.1.8

Lintel Beam horizontal 2 3.70 -- 0.60 4.44

Lintel Beam Vertical 4 3.00 -- 0.60 7.20

Slab beam Horizontal 2 3.70 -- 0.80 5.92

Slab beam Vertical 5 3.00 -- 0.60 9.00

d Weather shade,chhajja,Cornices and mouldings Page No.15,Item No.2.1.13

e (viii) Suspended floors,roofs,access platform, balconies (plain surfaces ) and shelves (cast in stu)

Page No.15,Item No.2.1.13

staircase up to 3.6m height

Waist slab 1 4.95 1.30 -- 6.44

At Ground Slab 1 14.00 21.60 -- 302.40

6 Excavated Earth filling in footings

Filling from available excavated stuff (Excluding rock) in trenches plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50M. And lift upto 1.5 M. Page No.11,Item No.1.17

Deduction for column footing :-

7 Mooram filling in footings

Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. Page No.11, Item No.1.18

(a) Brick work with modular fly-ash lime bricks ( Falg Bricks ) confirming to IS : 12894-2002 to class designation 40 in foundation and plinth in ::Page No.45,Item No.7.5 Cement Mortar 1:6(1 Cement :6 Coarse Sand) Page No.43,Item No. 7.5.4

Below g..b. horizontal 2 3.70 0.20 0.20 0.30

Below g..b. vertical 5 3.00 0.20 0.20 0.60

(b) Extra for brick work in superstructure: Page No. 43, ItemNo.7.6 Above plinth level for every floor or part there of in addition to rate for foundation and plinth Super structure

Above g..b. horizontal 2 3.70 0.20 2.90 4.29

Above g..b. vertical 3 3.00 0.20 2.90 5.22 115

Deduction due to

Ventilator 3 0.60 0.20 0.45 0.16

9 Half brick thick brick masonry with fly-ash lime bricks ( FaLG bricks ) confirming to IS : 12894-2002 of class designation 40 in superstructure above plinth level upto plinth level: :Page No.43,Item No.7.11.2 Cement Mortar 1:4 (1 Cement :4 Coarse sand) Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level:.Page No.43 ,Item No.7.12

Deduction due to

10 Mooram filling

Providing and filling in plinth with sand/Crusher dust and hard moorum under floor in layers not exceeding 20 Cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. Page No.11, Item No.1.18

Kitchen area 1 4.00 3.60 0.50 7.20

11 Providing and laying damp proof course (upto 50mm thick with plain cement concrete 1:2:4 (1cement :2 coarse sand : 4graded crushed stone aggregate 20mm nominal size) including formwork.Page No.22,Item No.3.13

horizontal 2 3.70 0.20 0.05 0.07

12 Applying a cost of hot bitumen VG - 10 using @ 1.7 kg/ sqm on damp proofcourse after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Page No.22,Item No.3.15

horizontal 2 3.70 0.20 -- 1.48

13 (A) Flooring Granite stone

15 mm thick Graite work (machine cut, table rubbed & mirror polished) for kitchen platform, counters, window sills and similar locations of required size laid over 20 mm thick base cement mortar 1:4 (1 cement:4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. . Granite stone black Page No.113,Item No.12.45.2

For stair case Riser 1x24 1.30 -- 0.15 4.68

(B) Flooring vitrified tiles

Providing and laying glazed vitrified floor (GVT/PGVT) tiles with digital print of random design with water absorption less than 0.5% and conforming to IS : 15622 -2017 of 1st quality of approved make in all colours and shades and size mentioned below (+/-10mm), laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete: Size 1000x 1000 mm. thickness 10 to 12 mm Page No.116,Item No.12.76.3

Kitchen area 1 4.00 3.60 -- 14.40

Store area 1 4.00 2.00 -- 8.00

14 Providing and laying rectified ceramic glazed floor tiles conforming to IS: 15622 of approved size , make colour , shade laid on 20 mm thick cement Mortar1:4 ( 1 cement :4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc. complete . Page No.112,Item No.12.9 Size 300x300 mm Page No.112,Item No.12.9.1

Providing and fixing ceramic glazed wall tiles conforming to Is :15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with matching pigment complete.Page No.111,Item No.12.7.2 size above 200 x300

kitchen platform 1 7.30 -- 0.60 4.38

deduction 3 0.75 -- 2.10 4.72

15 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer.Page No.79,Item No.9.11

16 Providing and fixing flush door shutters,confirming to IS 2202 (Part -1) idecorative type, core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges.Page No.53,Item No.8.12.2 (ii)35 mm thick(single leaf)

(a) Single leaf 5 1.00 -- 2.10 10.50

B) Extra for double leaf shutter instead of single leaf. Page No.53,Item No.8.15

(a) Double leaf

17 Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete:Page No.57,Item No.8.60.2 (ii)250x16 mm

18 Providing and fiixing bright finished brass tower bolts(barrel type) with brass polished MS screws complete:Page No.57,Item No.8.62.3(iii)150x10 mm

19 Providing and fixing bright finished brass door handles with brass polished MS screws complete:Page No.57,Item No.8.65.2(ii)100 mm

20 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ±0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the crners by means of M.S. galvanised /plastic brachets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.Page No.64,Item No.8.149.(2)30 mm thick door shutters with styles and rails of size 60x30 mm

21 Alluminium Glazed window

Providing and fixing aluminium work for doors, windows, vertilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS:733,IS:1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading,screws duly fixed in wall/floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS:1868, minimum anodic coating shall be of grade AC-15 (Glazing and paneliing to be paid for separately.Page No.85,Item No.9.47 For shutter of doors, windows & ventilators,including providing and fixing provision for fixing of fitting wherever required including the cost of PVC/neoprene gasket required(Fittings shall be paid for separately).Page No.82, Item No.9.47.2

Ventilator 3 0.60 -- 0.45 0.81

22 Providing and fixing glazing in aluminium door, window ventilator shutters and partitions etc. with PVC neprene gasket etc. complete ( Cost of aluminium snap beading shall be paid in basic item):. Page No.85,Item No.9.51With float glass panes of 6 mm thickness .Page No.83 ,Item No.9.51.3

Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat of red oxide zinc chromate primer. PageNo.79,ItemNo.9.15 with frame

Window Grill 13 1.20 1.20 20 Kg/sqm 374.40

Ventillators 3 0.45 0.60 15 Kg/sqm 12.15

Ventillators 12 0.90 0.30 16 Kg/sqm 48.60

(B) Providing and fixing M.S. frames of doors, windows ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10 cm long embedded in cement concrete blocks 15x10x10 cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer . Page No.79 ,Item No.9.16 Angle -iron frames Page No.79, Item No.9.16.2

35 x 35 x 5mm Angle for door frame

24 Providing & making 12 mm thick cement plaster of mix: Page No.103,Item No.11.2.4 (iv) In Cement mortar 1:6 (1 Cement :6 fine sand)

Above g..b. horizontal 2 3.70 -- 3.60 26.64

Above g..b. vertical 4 3.00 -- 3.60 43.20

Deduction due to

Ventilator 3 0.60 -- 0.45 0.81

25 Providing & making 15 mm thick cement plaster on the rough of side of single or half brick wall of mix: Page No.103,Item No.11.3.4(iv) In Cement mortar 1:6 (1 Cement :6 fine sand)

Quantity same as 15 mm plaster 487.35

Quantity same as item no. (5B+5C)/2 227.38

26 Providing & making 6 mm thick cement plaster of mix:Page No.103,Item No.11.1.1 (i)In Cement mortar 1:3 (1 Cement :3 fine sand)

Quantity same as item no. 5D+5F 346.49

27 Distempering

providing and applying Premium plastic emulsion paint with roller application minimum three coats applied @0.75 lit/ 10 sqm up to final as per relevant I.S. Code 15489:2013 Type -1 Class D & C (Glossy and semi Glossy Finish) of required shade (Product such as Asian Apcolite premium, Dulux Super cover , Berger Easy Clean , Nippon Breeze Metex Gold , Opus I-50/Calista) inclusive of providing abro tape on edges and articles and cleaning of door , windows, floor and surface as required with all tools tacles and labour complete for the work (with 3 years warranty ) Page No.131,Item No.14.65

Quantity as per 15mm thick cement plaster 714.73

Quantity as per 6mm thick cement plaster 346.49

providing and applying 2mm th white cement based acrylic grade putty with minimum 3 coats applied @ 4.0 kg/10 sqm as per relevant IS code 17545:2021 ( Product such as Asian Trucare , Bergerhappy walls putty , Birla Opus one pro smooth) to make surface smooth and even with all tools tacles and labour etc. complete for all works.(this item to be used in heigher grade painting works .Page No.130,Item No.14.57

Quantity as per 15mm thick cement plaster 714.73

Quantity as per 6mm thick cement plaster 346.49

29 Water proof cement point

Providing and applying exterior surface with Premium Heavy duty Glossy or matt finish Exterior Emulsion paint of required shade to give protective and watre proof finish minimum three coats applied @1.43 lit/ 10 sqm upto final finish as per relevant IS code 15489: 2013 Type 2 Class D,C,B& A (Glossy /matt/Egg Shellfinish) having high DFT and siilicon additive for elastomaric property (Product such as Asian Ultima, Dulux weathershield Maxx, Berger weathershield all gaurd , Nerolac Excel total , Nippon Durafresh expert , opus trulook ) inclusive of providing abro tape on edges and articles and cleaning of door , windows, floor and surface as required with all tools tacles and labour complete for the work (with 4 years warranty ) Page No.132,Item No.14.69

Quantity as per 12mm thick cement plaster 487.35 Sqm 104.00 50684.40

30 Proving and applying satin /matt finish enamel paint minimum 2 coats in all surface applying @0.75 lit/10 sqm up to required finish as per relevant IS code 2932:2013 of ( Product such as Asian satin enamel, dulux promise premium enamel , nerolac synthetic enamel opus prime enamel ) inclusive of providing abro tape on edges and articles and cleaning of door , windows, floor and surface as required with all tools tacles and labour complete for the work Page No.132,Item No.14.71

Ventilator 3 0.60 -- 0.45 0.81

Total 2848819.59

a Add 15% for water supply sanitation & electrification 427322.94

Say Rs in Lac 32.76

(TOTAL Rs.THIRTY TWO LACS SEVENTY SIX THOUSAND ONLY)

ABSTRACT OF DETAIL ESTIMATE OF PROPOSED CONSTRUCTION OF GROUND FLOOR PLAN FOR BUILDING FOR STATE LEVEL SHELTER HOME ( FOR THIRD GENDER ) AT SANT RAVIDAS WARD , WARD NO - 70 , SARONA , DIST .- RAIPUR (C.G.)

[ As per P.W.D. - Building S.O.R. In Force From 15-04-2026 ]

S.N PARTICULAR’S NOS. LENGTH (in mtr.) WIDTH (in mtr.) DEPTH/ HEIGHT (in mtr.) QUANTITY RATE UNIT AMOUNT

Providing and laying nominal mix reinforcement cement concrete with crushed stone aggregate using concrete mixer in all work upto plinth level excluding cost of reinforcement and form work. Page No.21,Item No.3.2.1(ii)1:1½:3 (1 cement : 1½ coarse sand :3 graded stone aggregate 20mm nominal size).b) M-20

Extra for laying PCC/ RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Page No.21,Item No.3.4

parapet column 7 0.20 0.40 0.90 0.50

For Mumty Columns 7 0.20 0.40 2.40 1.34

parapet column 2 0.30 0.50 0.90 0.27

Lintel Beam horizontal 2 3.70 0.20 0.20 0.30

Lintel Beam Vertical 2 4.30 0.20 0.20 0.34

Slab beam Horizontal 2 3.70 0.20 0.40 0.59

Slab beam Vertical 5 3.00 0.20 0.30 0.90

Stair Case Upto 3.6m Height

Providing and placing in position reinforcement for R.C.C work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation & plinth all complete:thermo Mechanically treated steel bars FE 500D Page No.22, Item No.3.12.2

(b)Column taking 9.61 110 Kg/Cum. 1056.66

(c)Beam taking 6.68 150 Kg/Cum. 1002.00

(d) Slab taking 12.73 100 Kg/Cum. 1273.13

3 Centering & Shuttering

a Providing and fixing formwork ncluding, shuttering, strutting,staging, propping bracng etc. complete and including its removal at levels, for: Page No.15,Item No.2.1.1 (i)Foundation, footings, bass of columns and plinth beam in any. Shape and size

b (vi) Columns,pillars Piers and likes-rectagular or square in shape Page No.15,Item No.2.1.5

for Parapet C2=7x2 14 0.20 -- 0.90 2.52

for parapet C3=8x2 16 0.30 -- 0.90 4.32

c (ix) Beams,lintels,cantillevers & walls Page No.15,Item No.2.1.8

Lintel Beam horizontal 2 3.70 -- 0.80 5.92

Lintel Beam Vertical 2 4.30 -- 0.60 5.16

Slab beam Horizontal 2 3.70 -- 0.80 5.92

Slab beam Vertical 5 3.00 -- 0.60 9.00

d Weather shade,chhajja,Cornices and mouldings Page No.15,Item No.2.1.13

e (viii) Suspended floors,roofs,access platform, balconies (plain surfaces ) and shelves (cast in stu)

Page No.15,Item No.2.1.13

staircase up to 3.6m height

(a) Brick work with modular fly-ash lime bricks ( Falg Bricks ) confirming to IS : 12894-2002 to class designation 40 in foundation and plinth in ::Page No.45,Item No.7.5 Cement Mortar 1:6(1 Cement :6 Coarse Sand) Page No.43,Item No. 7.5.4

(b) Extra for brick work in superstructure: Page No. 43, ItemNo.7.6 Above plinth level for every floor or part there of in addition to rate for foundation and plinth Super structure

horizontal 2 3.70 0.20 2.90 4.29

Deduction due to

Ventilator 2 0.60 0.20 0.45 0.11

5 Half brick thick brick masonry with fly-ash lime bricks ( FaLG bricks ) confirming to IS : 12894-2002 of class designation 40 in superstructure above plinth level upto plinth level: :Page No.43,Item No.7.11.2 Cement Mortar 1:4 (1 Cement :4 Coarse sand) Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level:.Page No.43 ,Item No.7.12

Deduction due to

6 (A) Flooring Granite stone

15 mm thick Graite work (machine cut, table rubbed & mirror polished) for kitchen platform, counters, window sills and similar locations of required size laid over 20 mm thick base cement mortar 1:4 (1 cement:4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. . Granite stone black Page No.113,Item No.12.45.2

(B) Flooring vitrified tiles

Providing and laying glazed vitrified floor (GVT/PGVT) tiles with digital print of random design with water absorption less than 0.5% and conforming to IS : 15622 -2017 of 1st quality of approved make in all colours and shades and size mentioned below (+/-10mm), laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete: Size 1000x 1000 mm. thickness 10 to 12 mm Page No.116,Item No.12.76.3

7 Providing and laying rectified ceramic glazed floor tiles conforming to IS: 15622 of approved size , make colour , shade laid on 20 mm thick cement Mortar1:4 ( 1 cement :4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc. complete . Page No.112,Item No.12.9 Size 300x300 mm Page No.112,Item No.12.9.1

Providing and fixing ceramic glazed wall tiles conforming to Is :15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with matching pigment complete.Page No.111,Item No.12.7.2 size above 200 x300

deduction 3 0.75 -- 2.10 4.72

8 Providing and fixing flush door shutters,confirming to IS 2202 (Part -1) idecorative type, core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges.Page No.53,Item No.8.12.2 (ii)35 mm thick(single leaf)

(a) Single leaf 2 1.00 -- 2.10 4.20

B) Extra for double leaf shutter instead of single leaf. Page No.53,Item No.8.15

(a) Double leaf

9 Providing and fixing bright finished brass sliding door bolt with nuts and brass polished MS screws complete:Page No.57,Item No.8.60.2 (ii)250x16 mm

10 Providing and fiixing bright finished brass tower bolts(barrel type) with brass polished MS screws complete:Page No.57,Item No.8.62.3(iii)150x10 mm

11 Providing and fixing bright finished brass door handles with brass polished MS screws complete:Page No.57,Item No.8.65.2(ii)100 mm

12 Providing and fixing factory made PVC door shutters of specified thickness made of styles and rails of a UPVC hollow section of specified size 59x24 mm and wall thickness 2 mm ±0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joined at the crners by means of M.S. galvanised /plastic brachets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws.Page No.64,Item No.8.149.(2)30 mm thick door shutters with styles and rails of size 60x30 mm

13 Alluminium Glazed window

Providing and fixing aluminium work for doors, windows, vertilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS:733,IS:1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading,screws duly fixed in wall/floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS:1868, minimum anodic coating shall be of grade AC-15 (Glazing and paneliing to be paid for separately.Page No.85,Item No.9.47 For shutter of doors, windows & ventilators,including providing and fixing provision for fixing of fitting wherever required including the cost of PVC/neoprene gasket required(Fittings shall be paid for separately).Page No.82, Item No.9.47.2

Ventilator 2 0.60 -- 0.45 0.54

14 Providing and fixing glazing in aluminium door, window ventilator shutters and partitions etc. with PVC neprene gasket etc. complete ( Cost of aluminium snap beading shall be paid in basic item):. Page No.85,Item No.9.51With float glass panes of 6 mm thickness .Page No.83 ,Item No.9.51.3

75% of window area 5.13 5.13 741.00 Sqm. 3801.33

Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat of red oxide zinc chromate primer. PageNo.79,ItemNo.9.15 with frame

Window Grill 4 1.20 1.20 20 Kg/sqm 115.20

Ventillators 2 0.45 0.60 15 Kg/sqm 8.10

Ventillators 2 0.90 0.30 16 Kg/sqm 8.10

(B) Providing and fixing M.S. frames of doors, windows ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10 cm long embedded in cement concrete blocks 15x10x10 cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer . Page No.79 ,Item No.9.16 Angle -iron frames Page No.79, Item No.9.16.2

35 x 35 x 5mm Angle for door frame 1 6.00 -- 6.00

Wt. @ 2.60 kg per Mtr 26.30 68.38

16 Providing & making 12 mm thick cement plaster of mix: Page No.103,Item No.11.2.4 (iv) In Cement mortar 1:6 (1 Cement :6 fine sand)

horizontal 2 3.70 -- 3.60 26.64

Deduction due to

Ventilator 2 0.60 -- 0.45 0.54

17 Providing & making 15 mm thick cement plaster on the rough of side of single or half brick wall of mix: Page No.103,Item No.11.3.4(iv) In Cement mortar 1:6 (1 Cement :6 fine sand)

Quantity same as 15 mm plaster 274.50

Quantity same as item no. (3B+3C)/2 82.55

18 Providing & making 6 mm thick cement plaster of mix:Page No.103,Item No.11.1.1 (i)In Cement mortar 1:3 (1 Cement :3 fine sand)

Quantity same as item no. 3D+3E 92.95

19 Distempering

providing and applying Premium plastic emulsion paint with roller application minimum three coats applied @0.75 lit/ 10 sqm up to final as per relevant I.S. Code 15489:2013 Type -1 Class D & C (Glossy and semi Glossy Finish) of required shade (Product such as Asian Apcolite premium, Dulux Super cover , Berger Easy Clean , Nippon Breeze Metex Gold , Opus I-50/Calista) inclusive of providing abro tape on edges and articles and cleaning of door , windows, floor and surface as required with all tools tacles and labour complete for the work (with 3 years warranty ) Page No.131,Item No.14.65

Quantity as per 15mm thick cement plaster 357.05

Quantity as per 6mm thick cement plaster 92.95

providing and applying 2mm th white cement based acrylic grade putty with minimum 3 coats applied @ 4.0 kg/10 sqm as per relevant IS code 17545:2021 ( Product such as Asian Trucare , Bergerhappy walls putty , Birla Opus one pro smooth) to make surface smooth and even with all tools tacles and labour etc. complete for all works.(this item to be used in heigher grade painting works .Page No.130,Item No.14.57

Quantity as per 15mm thick cement plaster 357.05

Quantity as per 6mm thick cement plaster 92.95

21 Water proof cement point

Providing and applying exterior surface with Premium Heavy duty Glossy or matt finish Exterior Emulsion paint of required shade to give protective and watre proof finish minimum three coats applied @1.43 lit/ 10 sqm upto final finish as per relevant IS code 15489: 2013 Type 2 Class D,C,B& A (Glossy /matt/Egg Shellfinish) having high DFT and siilicon additive for elastomaric property (Product such as Asian Ultima, Dulux weathershield Maxx, Berger weathershield all gaurd , Nerolac Excel total , Nippon Durafresh expert , opus trulook ) inclusive of providing abro tape on edges and articles and cleaning of door , windows, floor and surface as required with all tools tacles and labour complete for the work (with 4 years warranty ) Page No.132,Item No.14.69

Quantity as per 12mm thick cement plaster 274.50 104.00 Sqm 28548.00

22 Proving and applying satin /matt finish enamel paint minimum 2 coats in all surface applying @0.75 lit/10 sqm up to required finish as per relevant IS code 2932:2013 of ( Product such as Asian satin enamel, dulux promise premium enamel , nerolac synthetic enamel opus prime enamel ) inclusive of providing abro tape on edges and articles and cleaning of door , windows, floor and surface as required with all tools tacles and labour complete for the work Page No.132,Item No.14.71

Ventilator 2 0.60 -- 0.45 0.54

Total 832690.71

a Add 15% for water supply sanitation & electrification 124903.61

Say as 958000.00

Say Rs in Lac 9.58

(TOTAL Rs. NINE LACS FIFTY EIGHT THOUSAND ONLY)