Repair, Maintenance and laying interlocking tiles in Canal Colony Abohar

Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. ( For Toe Wall)

Cement concrete 1:3:6 mixing by mechanical means using concrete mixer volumetric type (as per csr ref no 10. 12(ii)) (for locking)

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.

Laying Reinforced cement concrete (M-20) mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrated but excluding steel reinforcement, centering and shuttering in super structure.

Cement Concrete 1:2:4 (M-15) with stone ballast using concrete mixer volume metric type (above Toe Wall)

Cement Concrete 1:2:4 (M-15) with stone ballast using concrete mixer volume metric type (above Brick Work)

12.5 mm thick cement plaster 1:4

Cement pointing 1:2 deep variety

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give aneven shade

Cement concrete 1:8:16 With brick blast 32/ 40mm gauge mixing by mechanical means using concrete mixer volumetric type Cement concrete 1:8:16 (as per csr ref no. 10.6a(ii)

Providing and laying 80 mm thick factory made cement concrete interlocking Paving blocks of M- 40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-inCharge.

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete.

Providing & fixing MS Sq. Bars 12mm x 12mm

Providing & fixing MS 2" x 2" Sq. Pipe

Painting of MS Sq. Bars 12mm x 12mm & MS 2" x 2" Sq. Pipe with primer coat and two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint.

Painting two coats with ready mix synthetic enamel paints over one coat metal primer

Dismantling Cement Concrete Plain 1:3:6

Dismantling brick work tile, masonry in Parking Area

Any Other

THE ENNA KHERA CO OP L AND C SOCIETY LTD.

B.B.C. CONSTRUCTIONS

SURINDER SINGH CONTRACTOR

Dinesh Kumar Garg Contractor

VARSHA CONSTRUCTION CO

DEEPAK KUMAR CONTRACTOR

ANMOL CONSTRUCTION COMPANY