Supply installation testing and commissioning of fire protection system and Annual Maintenance Contract for a period of 3 years to the Primary Health Centre at Betki

Supplying and installing, testing, perfect aligning and proper levelling and commissioning of fire service main pump, of 2850 LPM (Litres/min.) at 40 m head centrifugal type single stage pump, 50 HP, (37 kW). Rates including RCC foundation and the foundation size should be as per IS standard, bolting etc complete as per IS Specification & Engineers Instructions. ( Make - KBL/Crompton/Grundfos/Mather)

Supplying and installing, testing, perfect aligning and proper levelling and commissioning of Diesel operated fire service stand by pump, of 2850 LPM, at 40m head centrifugal type single stage pump, 50HP including all accessories like 200 lit fuel tank, 12 Volts 21Ah battery, exhaust pipe of 3M length with silencer, with suitable foundation, bolting etc complete as per IS Specification & Engineers Instruction. Incase of failure in elect pump the diesel engine pump shall operate automatically with standard facility switch gear suitable for operating pumps: made of CRCA sheet to be used for fabrication of boxes panel boards etc. Including Pumps Termination to the Panel. ( Make-L&T/Schneider/ Siemens). Rates including RCC foundation and the foundation size should be as per IS standard, bolting etc complete as per IS Specification & Engineers Instruction.

Supplying installing, testing, commissioning of Jockey Pump of 180 LPM at 50 m head, 3 ph. 440 A.C. 10 HP, (11 Kw).Rates including RCC foundation and the foundation size should be as per standard.( Make - KBL/Crompton/Grundfos/Mather)

Supply, fabrication, erection, testing, and commissioning of 150 mm dia size of GI ERW C class pipe (conforming to IS-1239) erection on above ground (including proper iron supports and anchor fasteners) with all fittings (Standard MS fittings with welded joint shall be used on the pipes) including Tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts/bolts/washers/tie-bolt supports, and applying 2 Red oxide primer, 2 coat of synthetic enamel paint as per specification no. FF-PP.

Supply, fabrication, erection, testing, and commissioning of 100 mm dia size of GI ERW C class pipe (conforming to IS-1239) erection on above ground (including proper iron supports and anchor fasteners) with all fittings (Standard MS fittings with welded joint shall be used on the pipes) including Tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts/bolts/washers/tie-bolt supports, and applying 2 Red oxide primer, 2 coat of synthetic enamel paint as per specification no. FF-PP.

Supply, fabrication, erection, testing, and commissioning of 100 mm dia size of GI ERW C class pipe (conforming to IS-1239) laying on under gound (including pipe trench excavation and refilling) with all fittings (Standard MS fittings with welded joint shall be used on the pipes) including Tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts/bolts/washers/tie-bolt supports, and clamps with coating of bitumen paint and 4 mm thick wrapping as per specification no. FF-PP.

Supply, fabrication, erection, testing, and commissioning of 75/80 mm dia size of GI ERW C class pipe (conforming to IS-1239) erection on above ground (including proper iron supports and anchor fasteners) with all fittings (Standard MS fittings with welded joint shall be used on the pipes) including Tees, elbows, reducers, unions, flanges, rubber gaskets, GI nuts/bolts/washers/tie-bolt supports, and applying 2 Red oxide primer, 2 coat of synthetic enamel paint as per specification no. FF-PP.

Supply, Fabrication, Erection, Testing, and commissioning of the following sizes of G.I. ERW C class pipes (conforming to IS -1239), Erection Above Ground (including proper iron supports and anchor fastners), and Laying on Underground with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts. Washer, tie bolt supports and clamps, etc., with one coat of red oxide primer and one coat of synthetic enamel paint. 50 mm

Supplying and Erecting MS/CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 800mm x 600mm x 250mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour. ( Make-Newage/Safex/Safeguard)

Supplying , Installing, Testing and Commissiong of fire fighting R.R.L. Hose pipe, 63mm dia, 15 m in length, fitted with necessary accessories such as male and female couplings. ISI mark. ( Make-Newage/Safex/Safeguard )