PROVISION OF STORAGE YARD AS STORAGE SHED FOR FURNITURE AT CGDHQ-10 CAMPBELL BAY

Amount

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth, for foundation etc and getting in soft/loose soil all as specified and as directed.

Material and Labour for Cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete all as specified and as directed.

Material and Labour for Reinforced cement concrete M30 (Design Mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

Material and Labour for Reinforced cement concrete M30 (Design Mix) using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts all as specified and as directed.

Material and Labour for Reinforced cement concrete M30 (Design Mix) using 20 mm graded stone aggregate as in beams, bands, cantilevers, bressummers, lintels over 1.5m span, all as specified and as directed .

Material and Labour for Reinforced cement concrete M30 (Design Mix) using 20 mm graded stone aggregate as Chajjas all as specified and as directed.

Form work to sides of concrete footings/foundations/plinth beams etc all as specified and as directed.

Form work to sides of columns for fair finished surfaces all as specified and as directed.

Form work to sides and soffits of lintel beams, roof beams, cantilevers, shelves all as specified and as directed.

Form work to sides and soffits of chajja all as specified and as directed.

Form work to edges concrete exceeding 5 cm but not exceeding 10 cm wide all as specified and as directed.

Material and Labour for TMT steel bars 10 mm dia and over cut to length bend to shape required and binding with and including mild steel wire not less than 0.9 mm dia all as specified and as directed.

All as per item No12 herein before but 6 to 8 mm dia.

All as per item No12 herein before but 5 mm dia and over up to and including 10 mm dia in stirrups all as specified and as directed.

Material and Labour for Precast cement concrete block masonry with solid blocks 1:3:6 type C-2, exc. 10 cm in width and setting in mortar 1:4, complete all as specified and as directed.

Material and Labour for rendering 15mm thick external cement plaster in cement mortar 1:4 on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement.

Material and Labour for rendering 10mm thick in cm 1:6 on fair faces of brick work or concrete surface finished even and smooth without using extra cement.

Material and Labour for Sand fill cushioning under floors all as specified and as directed.

Material and Labour for Hard core of broken stone of gauge n.exc 63 mm, deposited spread and levelled in layers n.exc 15 cm thick all as specified and as directed.

Material and Labour for Cement concrete type D2, 1:4:8 75 mm thick as a sub-base, in floors all as specified and as directed.

Material and Labour for Cement concrete type B1, 1:2:4 40 mm thick in floor, finishing cement concrete surface even and smooth using extra cement all as specified and as directed.

Supply and Fixing of Glass dividing strips 3 mm thick and 38 mm width all as specified and as directed.

Material and Labour for Damp proof course in horizontal/vertical surfaces including necessary form work, 40 mm thick in 1:2:4 type B0 concrete all as specified and as directed.

Material and Labour for Treating the backfill in contact with foundation at the rate of 7.5 Ltrs of ATT chemical emulsion per Sqm of vertical surface all as specified and as directed.

Material and Labour for Treating the top surface of filled earth at the rate of 5 Ltrs of ATT chemical emulsion per SM of surface all as specified and as directed.

Material and Labour for treating the soil under plinth protection @ 5 liters of ATT chemical emulsion per sqm all as specified and as directed.

Material and Labour for treating the soil along the external perimeter of building @ 2.25 liters of ATT chemical emulsion per meter of perimeter of wall all as specified and as directed.

Material and Labour for Roof trusses (framed), trussed, purlins, rails, fastenings and heavy bracket framing including distance pieces, cleats etc grade Fe-410-S all as specified and as directed.

Supply and Fixing of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

Supply and Fixing of Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.

Supply and Fixing of 0.63mm Plain, galvanized, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as specified and as directed.

Supply and Fixing of mild steel wind ties including all necessary drilling, bolting or riveting etc conforming to Fe-410-S or Fe-310-0.

Supply and Fixing of 1.25mm thick Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type all as specified and as directed.

Supply and Fixing of Safety lever locks mild steel with 4 levers for rolling shutters all as specified and as directed.

Material and Labour for 2nd class HW plain solid straight chowkats and frame, brought framed rebated on the solid rounded or chamfered pat together with glue pinned at joint all as specified and as directed.

Supply and Fixing of 2nd class HW 35 mm thick paneled door shutter (two panel)with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces.

Material and Labour for Preparation of new mild steel surface of any description over 10 cm width or girth not otherwise described and applied two coats of synthetic enamel paint over a coat of zinc crome all as specified and as directed.

All as per Item No. 37 above but not exceeding 10 cm in width or girth.

All as per Item No. 37 above but two coats of aluminium paint over a coat of aluminium red oxide primer all as specified and as directed.

Material and Labour for PCC 1:2:4 type B1 in Bed blocks, cills etc all as specified and as directed.

Material and Labour for 75mm thick cement concrete 1:3:6 type C2 with using 40mm graded stone aggregate as in plinth protection surface finished even and smooth without using extra cement all as specified and as directed.

Material and Labour for Preparation of newly plastered surface and applied three coats of white washing to walls all as specified and as directed.

All as per Item No. 42 here in before but two coats of cement base paint.

Supply and Fixing of 3 mm thick figured glass pin head type and glazing with oil putty all as specified and as directed.

Supply and Fixing of 3 mm thick plain glass of squares not exceeding 0.5 Sqm in each pane all as specified and as directed.

Supply only integral water proofing compound.

Supply and Fixing of butt hinges 100mm size standard steel medium weight cold rolled mild steel (ISI Marked) all as specified and as directed.

Supply and Fixing of 150mm thick aluminium, anodized, barrel tower bolts of extruded section (ISI Marked) all as specified and as directed.

Supply and Fixing of 300mm mild steel sliding door bolt plate type, store enameled block with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple side all as specified and as directed.

Supply and Fixing of 150mm extruded aluminium alloy handles fabricated type anodized (ISI Marked) all as specified and as directed.

Supply and Fixing of Rolled mild steel framed work as in grills, gratings, etc.. With end of bars shouldered and /or riveted , or forged into spikes , framed guard bars , framework of water tanks and similar work confirming to Fe 290 Gde 165 all as specified and as directed.

Material and Labour for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no. each leaf ) hinge type B-21 75mm long (2 no. per leaf) 100mm aluminium handle (1 no. per leaf) complete all as specified and as directed.

Material and Labour for Anodised aluminium frame for doors, windows ventilators with one or more rebates including (minimum thickness of anodised coating 50 micron) ,joining cleat for fixing etc. complete all as specified and as directed.

Material and Labour for rendering 5mm thick in cement mortor 1:4 on ceiling including applying three coats at whitewash on ceiling all as specified and as directed.

Material and Labour for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Material and Labour for point wiring with 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including medium grade rigid non metallic PVC conduit of suitable size not less than 20 mm dia with all necessary fittings concealed in wall/roof/floor on wall/roof surfaces including one run of 1.5 Sqmm FRLSPVC insulated copper conductor cable green in colour for continuous earthing including provision of Gang box/ 2.0mm thick MS terminal box for fixing switches, sockets, fan regulators etc fixed to wall with 3mm thick laminated sheet top cover complete all as specified for:- a) One light point controlled by one switch.

Supply and fixing of switch piano, one way, flush type, single pole 240V, 5 Amps all as specified and as directed.

Supply and fixing of ceiling rose PVC surface Bakelite 65 mm x 50 mm,3 terminals all as specified and as directed.

Material and Labour for sub main wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 2x4.0 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 4.0 Sqmm PVC FRLS multistranded copper conductor cable as continuous earth wire including taking out old wire complete as directed by Engr in Charge.

Supply and fixing of sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 8 Way complete all as specified and as directed.

Supply and fixing of MCB single pole 6 to 32 Amps, 10KA, C curve all as specified and as directed.

Supply and fixing of MCB Double pole 32 Amps, 10KA, C curve all as specified and as directed.

Supply and fix surface mounting 20 W LED Tube light fitting nominal system lumen output of 2000 lumens and a minimum system efficiency of 100lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a rated system lifetime of 50000 burning hours at L70. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) including taking down old unserviceable fittings any type including round block complete all as specified and as directed. Make : Philips/CG/WIPRO

M/s Kamal Electrical

V CHINNA DURAI

AR CONSTRUCTIONS

Govinda Swamy Construction

Y Abulu

P Babu

S K ENTERPRISES