Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹19,500
Closing Date
24 Aug 2026, 3:00 pmDue tomorrow
Sh. Yogesh Lohchab
Wazirabad Water Works
Making of arrangement to control the waste water flow through channel connected to river Yamuna at 1st 40 MGD plant wazirabad W.W.
2026_DJB_297102_2
NIT No. 06 (2026-27)
Open Tender
Miscellaneous Works
Item Rate
15 days
Wazirabad Water Works
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Account No SB 06121000095461
₹19,500
17 Aug 2026
17 Aug 2026
24 Aug 2026
17 Aug 2026
24 Aug 2026
17 Aug 2026
17 Aug 2026 - 24 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | GST % |
|---|---|---|---|---|---|---|
| 1.01 | Repairing of brick wall which is totally damaged will be repaired by good quality ofportar in the wall and good finish to make proper level under the channel where this waste water is coming inside the pump house. And also used for dewatering of waste water which is collect during any flooded period. | 1 | Job | 80 | ₹80 | 18% |
| 1.02 | MS Plate of size 1200x1200x25 mm thick plate to make the proper sealing of wall to make proper level with the wall etc. as required. | 1 | Job | 80 | ₹80 | 18% |
| 1.03 | Fixing of the MS Plate on brick plaster wall with the help of anchor bolt of size 16 mm x 250 mm long – 20 Nos. with proper rubber packing on wall to make totally leak proof from the system. | 20 | Nos | 80 | ₹1,600 | 18% |
| 1.04 | Making of MS pipe of size 20” dia of 9.5 mm thick almost 400 mm long so that the distance is to be maintain for operation of valve with handle of size 20” dia to operate of sluice gate system. | 1 | Mtr | 80 | ₹80 | 18% |
| 1.05 | MS Plate of size 1200x1200x20 mm duly welded with pipe both side one side for this plate & other side for previous plate Sl.No. 02 which is already grouting with wall. | 2 | Job | 80 | ₹160 | 18% |
| 1.06 | Making MS Plate of size 80x80x1000 metre long with proper slot of size 25 mm up to depth of 25 mm – 30 mm for guide of MS Flap of size 500x500x20 mm thick with proper smooth on each side with proper levelling etc. as required for machining of 4 side corner with proper sq. size of 90˚ | 3 | Job | 80 | ₹240 | 18% |
| 1.07 | Making the M.S. Flap of size 900 x 3000 x 25 mm thick with proper making smooth on each side with proper levelling etc. as required & also machining of 4 side corners with proper sq. size with 900. | 1 | Nos. | 80 | ₹80 | 18% |
| 1.08 | Making SS Shaft of size 50 mm dia length approximate 1.25 metre long also fixing with nut bolt at MS Plate & also fixed with proper handle etc. as required. | 1 | Job | 80 | ₹80 | 18% |
| 1.09 | GM Nut as per site required. | 1 | Job | 80 | ₹80 | 18% |
| 1.1 | Guide with proper support of shaft. | 1 | No | 80 | ₹80 | 18% |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.81 MB
NIT6_2.pdf
Tender Documents • 1.13 MB
BOQ_395736.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].