Establishment of Model Degree Colleges in 12 districts of Assam.

Amount

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. -- Upto a depth of 2.00 m below the existing G.L. In ordinary soil

Extra over item above for each 1m depth or part thereof beyond the initial depth of 2m

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. -- With silt (predominantly non plastic) by truck carriage including loading and unloading.

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantityetc. complete as directed and specified, including forest royality within a distance of 8.00Km. (Forest royality shall be reimbrushed on production of necessary certificate from the forest authority duly countersigned by D.F.O. concerned). -- Other than Guwahati municipality area.

Loading, unloading of approved soil

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). In prop. 1:3: 6 (1 cement:3 coarse sand : 6 coarse agg. by volume (using mixture machine)

Plain cement concrete floor base in prop1:3:6 laid in alternate bays as specified with coarse agg. of size 13mm to 32mm including dewatering if necessary, and curing etc. complete. 50 mm thick in prop 1:3:6

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

Providing and laying plain/reinforced cement croncrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) Using mixture machine:: In sub - structure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. M20 or Prop. 1:1.5:3

Providing and laying plain/reinforced cement croncrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) Using mixture machine:: Super-structure from plinth level upto 1st floor level. Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. M20 or Prop. 1:1.5:3

Providing and laying plain/reinforced cement croncrete works cement with coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) Using mixture machine:: Extra over above item for each subsequent floor or part thereof above the 1st floor level.

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. Using 25mm thick plank

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. For depth not exceeding 1.0M.

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. Floors etc. upto 200mm in thickness.

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Extra for each subsequent 1.0M height or part thereof beyound the initial height of 4.0M as mentioned in above item no. 3.2.1

Providing brick soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. Brick on flat soling.

Filling sunken floor with broken jhama brick bats and sand including compacting and supplying of materials complete as specified and directed for all levels.

Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed in sub-structure up to plinth level. In proportion 1:4.

112 mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) In cement mortar in proportion 1:4.(1 cement:4 sand)

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level as mentioned in above item: 112mm thick brick/ R.B wall

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.

Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor (base concrete to be measured and paid separately) to be laid in panels including curing complete as directed. 20 mm thick

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. 20 mm thick

Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile Choksey/Sika/Pedelite/Rouf) /white cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Normal range (sizes 300mmx300mm and above) Somany made

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) Normal range (Size 600 mm x 600mm) Nitco / Somany make

Providing ANTI-SKID floor tiles of approved quality, size, shape and thickness not less than 8mm on floors, skirtings over a cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand) approved make with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement, complete at all levels as specified and directed. CERAMIC TILES Normal range (size 300mm x 300mm and above)

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. In cement mortar 1:4

15 mm thick Cement plaster in single coat on rough side of single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. In cement mortar 1:4

Extra over for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. Single coat plaster

Extra over for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. Single coat plaster

Extra over for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. Single coat plaster

Providing and fixing, in position suspended false ceiling using E-Grid (exposed ceiling suspension 2430 system) of grid size 600mm x 600mm/1200mmx600mm with main runner 38 x 24mm, cross tee 29mm x 24mm & wall angle 24mm x 24mm or Everest E-Grid 1510(only for 4mm board). Using 4mm/6mm thick High Pressure Steam Cured Everest Non Asbestos Fibre Cement Board of M/s Everest Industries Ltd. as per IS 14862, to be placed in a grid of G.I. system duly suspended with 4mm/6mm dia G.I/M.S bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc. The main runners to be secured to structural soffit by hanger @ 1220mm maximum c/c. The last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall. Flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600mm/1200mmx600mm grid, all complete as per the drawing & directions of engineer-in-charge. Finally, boards are to be painted with 2 coats of acrylic emulsion paint of approved shade/make over a coat of cement primer before installing it on the grid. Everest Standard Ceilings 4 mm

Providing ,fitting and fixing A.C. building board in ceilling with necessary nails, wood screws including 1st class local wood 50mm x 12mm (hollock/bonsum/sundi) beading including paint ing two coats to timber beads complete as directed ( ceilling joist to be measured and paid separately). 4mm thick

Providing barge board of size 200mm x 20mm with 1st class local Hollock/ Bonsum timber including fitting and fixing with necessary wood screws etc. complete.

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) (Dyna roof / TATA Durashine) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) 0.60 mm thick

Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) (Dyna roof /TATA Durashine) at all levels including fitting and fixing self drilling, self tapping screws complete complete. 0.60 mm thick

Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts).

Providing rails for plying of rollers of gate made made from 50mm x 6mm size M.S. flat and to be fitted with 3 nos of hinged hold fasts to be embedded in concrete prop. 1:2:4 of 10mm wide and 75 mm deep over brick flat soling 250mm wide including curing etc. complete.

Providing roller to the gate including welding etc.complete With 25mmx50mm (dia) roller

Providing, fitting and fixing powder coated pressed steel door frame made of 1.25mm/ 1.6mm thick sheet of various sizes with necessary hinge jamb, lock jamb, head and steel base ties at the bottom of the frame. The whole frame shall be welded or rigidly fixed together by mechanical means with base ties of pressed mild steel angle of size 20x20x1.25mm thick. Frame to be filled up with 1:4:8 P.C.C. after fitting the frame with brick/ concrete works etc.complete as directed by the department for all levels. (P.C.C. to be measured and paid for seperately). 1.25mm thick sheet Size 125mm x 60mm (Single rebate)

Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC block etc Side hung and Top hung windows and ventilators (HINDALCO make) 6 mm clear glass

Providing, fitting and fixing steel windows/ ventilators (openable) of standard rolled steel sections as per relevant I.S. Code-1038 joints mitred and welded with 15mmx3mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device and steel handles, peg stays of 300mm long etc. complete as per drawing including applying a priming coat of red-lead paint.

Providing and fixing clear sheet glass beded in putty and fixed with/without wooden bidding including necessary cutting and glass to be required sized(payment for wooden bead shall be made separately) Area of glass panes exceeding 0.15m2 but not exceeding 0.52m2. 4.00mm thick.

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. Non decorative type and block board core. 35 mm thick

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. Decorative type face panel and block board core. 35 mm thick .

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. Ornamental grill Fixed to wooden frames

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. Ornamental grill Fixed to Brickwork/P.C.C/R.C.C.

Applying one coat of alkali resistance primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth.: Priming coat with distemper primer

Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on new wall surface to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after throughly brooming the surface free from mortar dropings and other foreign matter and including preparing surface even and sand papered smooth.: Top coat

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials.

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) Thickness = 1.0mm thick

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. With ready mixed paint , wood primer (white).

Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. Surfaces above 100mm in width or girth. General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Applying primary coat over new steel and other metal surface upto 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. Surfaces up to 100mm in width or girth. High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished): Sliding door bolts 250mm x 16mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished): Tower bolts 250mm x 12mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished): Door handles 150mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished): Mortice lock vertical type 100mm(Godrej with handle (6-lever)

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished): Door stopper with rubber stopper

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete (upto 1st floor level). ISI approved super ductile TMT Bar: TATA/SAIL

Extra for fitting and fixing in position reinforcement bars in each subsequent floor or part thereof above first floor level.

Providing, fitting, hoisting and fixing of roof trusses including purlins, bottom runners of rectangular hollow section (RHS) / square hollow section (SHS) conforming to relevant I.S. 1611 and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications.

Providing plinth protection with bricks flat laid in cement mortar 1:4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. 300mm wide and average 150mm deep with bed slope 1 in 150 with initial depth of 100mm.

Applying 2 coats of 1mm thick acrylic polymer modified cementitious waterproofing coating Brushbond of Fosroc Chemicals for waterproofing structures like roof slabs, basement, sunken slabs, chajjas, tunnels, water tank etc. after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (5 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD

APPROACH ROADS: Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 including all lead and lifts as per Techincal Specification Clause 303.1

Construction of Granular Sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Clause 401:- For Grading I Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification Clause 405:- WBM Grading III (Using stone screening type- A13.2mm for Gr 3)

Providing and applying tack coat with Bitumen emulsion (CRS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per technical pecification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.

Providing and laying liquid seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and crossfall using Type A or Type B or Type C as per Technical Specification Clause 510. Type B (2.36 mm to 1.80 micron) Polymer Modified Bitumen

Loading of Lime, Aggregate, Stone Boulder, Brick Aggregate, Kankar, Building Rubbish, Crushed Slag, Stone for Masonry Work, by manual means including a lead upto 30m.

Unloading of Lime, Aggregate, Stone Boulder, Brick Aggregate, Kankar, Building Rubbish, Crushed Slag, Stone for Masonry Work, by manual means including a lead upto 30m.

SANITARY WORK : Providing fitting and fixing white vitreous water closet squatting pan (Indian type Orissa pattern) of size 580x450mm with 100mm SCI 'P' or 'S' trap, of Parryware make with all fittings and fixtures complete including cutting and making good the walls and floors whereever required.

Providing fitting and fixing white vitreous china pedestal type water closet (European type W.C pan 400mm high ) of Parryware make with seat and lead ,CP brass hinges and rubber buffers ,10 litre low level PVC flushing cistern with fittings, CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. White

Providing fitting and fixing white vitreous china flat back type lipped front urinal basin of (455x360x267)mm of Parryware make with automatic flushing cistern of similar colour and standard flush pipe and CP brass spreader with brass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. -- White For range of 4 No. urinal basin with 10ltr. Flushing cistern

Providing vitreous china wash basin of size 550mm x400mm of Parryware make with CI/MS brackets, 32mm CP brass waste coupling of standard pattern C.P stop cock,C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. White vitreous china wash basin of size 550mm x400mm

Extra for providing fitting and fixing pedestal for wash basin. White

Providing vitreous China Counter-top wash basin of size 550mm x 420mm of Parryware Aquarious make with 32mm CP brass waste coupling of standard pattern,C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls and slabs wherever required. White Vitreous Parryware Aquarious make wash basin of size 550mm x 420mm

Providing fitting and fixing stainless steel AISI 304 (18/8) Kitchen sink (610x535x230) of Parryware make as per IS : 13983 with C.I. Brackets and 40 mm stainless steel plug including painting of fittings and brackets, cutting and making good the walls wherever required.

Providing fitting and fixing white vitreous laboratory sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe,coupling, including painting of fittings, cutting and making good the walls wherever required. Laboratory sink of overall size (530x430x180)mm

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.

Providing fitting and fixing glass shelf with C.P. guard rail of Agmeco make to wall complete fixed with 25mm long screw, rawl plug etc.complete . Size (525x125) mm

Providing, fitting and fixing soap dish of Agmeco make complete as specified and directed. Stainless Steel Soap Dish Rectangular (Cat no. MS 0273)

Providing, fitting and fixing soap dish of Agmeco make complete as specified and directed. Stainless Steel Soap Dish Rectangular (Cat no. MS 0251,0252,0253 & 0254)

Providing, fitting and fixing chrome plated (CP) towel rail of Jaquar make complete as specified and directed. Continental Accessories (600mm long)

Proving fitting and fixing C.P. bottle trap,Agmeco make for basin etc. complete as directed and specified. 40mm dia

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing with clamps etc.as necessary complete at all levels including below G.L as directed and specified. : In exposed surfaces or in trenches. 110mm dia.

Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages. 110mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. : In exposed surfaces or in trenches. 110mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. : Concealed by chiselling or breaking brick wall/C.C/R.C.C. and making good to the damages. 110mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 110mm dia.

Supplying fiting and fixing PVC coupler of (Supreme / Prince)or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. In exposed surfaces or in trenches. 110 mm dia

Providing fitting and fixing 100mm dia. PVC cowel of ISI make complete as directed and specified.

Providing fiting & fixing (300x230)mm C.I. yard gully hinged Grating complete as directed and specified.

Providing fiting & fixing C.P.Grating to the floors complete as directed and specified. 50mm dia

Providing fiting & fixing C.P.Grating to the floors complete as directed and specified. 75mm dia

Supplying fiting and fixing white vitreous china division plate of sizes (700x340x120) mm of Parryware including fitting and fixing compete as directed and specified.

Providing fitting and fixing (600x600)mm 90mm thick C.I. Man hole cover and frame of 25 Kg. weight complete as directed and specified

Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.

Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.

Supplying and placing ferrocement septic tanks of rectangular shape in to pit with manhole cover with cleaning arrangement over single brick flat soling and 75mm 1:3:6 P.C.C. Baffle wall, inlet and outlet etc are provided at suitable points complete as directed. 50 Users

Providing and fixing S.F.M.C. Brand 3 layer (Outer green coloured UV Stabilised, middle black coloured UV Stabilised and inermost layer white coloured with antimicrobial property) Fusion welded PP-R (Poly propylene- random copolymer) Pipes, SDR 7.4 having thermal stability for hot and cold water supply including all plain PP-R fittings and brass threaded PP-R fitting and clamping, cutting and making good to the damages. Exposed or in trenches: 25 mm OD (PN-16) SFMC brand 3 layer P.P.R. pipe

40 mm OD (PN-16) SFMC brand 3 layer P.P.R. pipe

50 mm OD (PN-16) SFMC brand 3 layer P.P.R. pipe

75 mm OD (PN-16) SFMC brand 3 layer P.P.R. pipe

110 mm OD (PN-16) SFMC brand 3 layer P.P.R. pipe

WATER SUPPLY WORK : Providing and fixing S.F.M.C. Brand 3 layer (Outer green coloured UV Stabilised, middle black coloured UV Stabilised and inermost layer white coloured with antimicrobial property) Fusion welded PP-R (Poly propylene- random copolymer) Pipes, SDR 7.4 having thermal stability for hot and cold water supply including all plain PP-R fittings and brass threaded PP-R fitting and clamping, cutting and making good to the damages. Concealed pipe with cutting, chiselling & making good the walls: PN-16 Pipe,16mm OD,SDR-7.4

Providing and fixing S.F.M.C. Brand 3 layer (Outer green coloured UV Stabilised, middle black coloured UV Stabilised and inermost layer white coloured with antimicrobial property) Fusion welded PP-R (Poly propylene- random copolymer) Pipes, SDR 7.4 having thermal stability for hot and cold water supply including all plain PP-R fittings and brass threaded PP-R fitting and clamping, cutting and making good to the damages. Concealed pipe with cutting, chiselling & making good the walls: PN-16 Pipe,20 mm OD,SDR-7.4

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Jaquar make - Continental /Clarion - Standard

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) Jaquar - Continental / Clarion - 15mm dia( Angular stop cock )

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Jaguar make - Long neck with areator

Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) Jaquar brand - Continental / Clarion - Sink cock with raised 'J' shaped swinging spout

Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) Jaquar make - Continental - Shower arm 190mm long heavy casted body with wall flange

Supplying, fitting and fixing Chrome Plated (C.P.) basin mixer complete as directed. Jaquar make (For VIP use. Prior approval of Chief Engineer PWD (Bldg) must be taken before use) Continental / Clarion Central hole basin mixer without popup waste system with 450mm long copper pipes and brass nuts Cat No. 167

Supplying, fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed. Jaquar make - Continental/ Clarion Wall mixer with telephone shower arrangement only Cat No.23267

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. 50mm dia

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. 40 mm dia.

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. 25 mm dia.

Supplying fitting and fixing G.I. Foot valve with strainer including cutting necessary threads to pipes. 50 mm dia (Heavy type)

Supplying fitting and fixing G.I. Foot valve with strainer including cutting necessary threads to pipes. 40 mm dia (Heavy type)

Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small tin container (container scaffolding tools etc. will have to be arranged by the contractor at his own cost).

Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. PVC Pipe - Supreme Brand 200mm diameter

Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. PVC Pipe - Supreme Brand 40mm diameter

Supplying fitting and fixing ribbed screen PVC filter 3.00 metre long. 200mm Diameter

Supplying fitting and fixing check valve (non return valve) including thread to pipes. 40 mm dia

Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained

Flushing, clearing, washing and watering of the tube well

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex/ Polycon/Patton make over the staging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes complete as directed. 2000 litre capacity - Sintex make

Labour for erecting and placing PCVC Tank over the staging up to a height of 5.00m complete as directed. 2000 litre capacity

INTERNAL ELECTRIFICATION WORKS: Wiring to a light point with 1.5 sq. mm PVC. insulated unsheathed 1.1KV. grade (R.R Keble/Finolex/Havells Make) as approved by this department single core copper conductor cable in Recessed PVC. conduit wiring system with 20 mm. dia., 2 mm thick rigid P.V.C. conduit including 6 Amps flush type switch (Anchor/Kolors Kany.com. Make), in iron clad switch board (I.S.I. marked) with phenolic laminated sheet cover, ceiling rose etc.complete.: Short point upto 3.00 metre length

Wiring to a light point with 1.5 sq. mm PVC. insulated unsheathed 1.1KV. grade (R.R Keble/Finolex/Havells Make) as approved by this department single core copper conductor cable in Recessed PVC. conduit wiring system with 20 mm. dia., 2 mm thick rigid P.V.C. conduit including 6 Amps flush type switch (Anchor/Kolors Kany.com. Make), in iron clad switch board (I.S.I. marked) with phenolic laminated sheet cover, ceiling rose etc.complete. Medium point upto 6.00 metre length

Wiring to a light point with 1.5 sq. mm PVC. insulated unsheathed 1.1KV. grade (R.R Keble/Finolex/Havells Make) as approved by this department single core copper conductor cable in Recessed PVC. conduit wiring system with 20 mm. dia., 2 mm thick rigid P.V.C. conduit including 6 Amps flush type switch (Anchor/Kolors Kany.com. Make), in iron clad switch board (I.S.I. marked) with phenolic laminated sheet cover, ceiling rose etc.complete. Long point upto 10.00 metre length.

Wiring as in item no. 72 above in Recessed PVC. Conduit wiring system with 20 mm. dia, 2 mm thick, rigid P.V.C. Conduit to a Fan/exhaust Fan point including 6 Amps flush type (Anchor/Kolors Kany.com. Make) switch, ceiling rose I.C. switch board with phenolic laminated sheet cover as required complete. Medium point upto 6.00 metre length

Wiring as in item no. 72 above in Recessed PVC. Conduit wiring system with 20 mm. dia, 2 mm thick, rigid P.V.C. Conduit to a Fan/exhaust Fan point including 6 Amps flush type (Anchor/Kolors Kany.com. Make) switch, ceiling rose I.C. switch board with phenolic laminated sheet cover as required complete. Long point upto 10.00 metre length.

Wiring as in item no. 72 above to a call bell point in Recessed P.V.C. Conduit wiring system with 20 mm. Dia, 2.00 mm thick P.V.C. Conduit pipes. including I.C. switch board with phenolic laminated sheet cover, ceiling rose etc. Long point upto 10.00 metre length.

Wiring to 5 pin 6 Amps plug with 1.5 sq. mm PVC. insulated unsheathed single 1.1 K.V. grade ISI marked (R.R Kable/Finolex/Havells Make) single core copper conductor cable in Recessed P.VC. conduit wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor/Kolors Kany.com. Make), I.C. switch board (I.S.I. marked) with phenolic laminated sheet cover including earth continuity with 2.5 sq. mm. PVC. insulated unsheathed single core copper conductor cable to third pin of the plug socket etc. as required complete with 20 mm. dia. rigid PVC. conduit pipes when placed elsewhere. Long point upto 10.00 metre length.

Wiring as in item no. 65 when fixed on the same board In Recessed PVC. conduit wiring system on the recessed I.C. switch board.

Wiring for twin control light point with 1.5 sq. mm. PVC. insulated unsheathed copper conductor cable (R.R Kable/Finolex/Havells Make) in recessed 20 mm. dia, 2.00 mm thick PVC. conduit with 2-way 6 Amps F/T switch (Anchor/Kolors Kany.com. Make), I.C. switch board with phenolic laminated sheet cover ceiling rose including connection etc. as required. Long point upto 10.00 metre length.

Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated unsheathed I.S.I. marked single core copper Conductor cable (R.R Kable/Finolex/Havells Make) in Recessed P.V.C. conduit wiring system including providing and fixing 5 pin 16 Amps flush type socket outlets (Anchor Make) and 16 Amps flush type switch (Anchor/Kolors Kany.com. Make), I.C. switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm PVC. insulated unsheathed single core copper conductor cable to the 3rd pin as required complete with 20 mm. dia, 2 mm thick rigid P.V.C. Conduit pipes. Extra long point upto 15.00 metre length

Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated unsheathed I.S.I. marked single core copper Conductor cable (R.R Kable/Finolex/Havells Make) in Recessed P.V.C. conduit wiring system including providing and fixing 5 pin 16 Amps flush type socket outlets (Anchor Make) and 16 Amps flush type switch (Anchor/Kolors Kany.com. Make), I.C. switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm PVC. insulated unsheathed single core copper conductor cable to the 3rd pin as required complete with 20 mm. dia, 2 mm thick rigid P.V.C. Conduit pipes. Extra Long point upto 20.00 metre length.

Wiring for circuit wiring with P.V.C. insulated unsheathed 1.1 K.V. grade (I.S.I marked, R.R Kable/Finolex/Havells Make) single core copper conductor cable in Recessed PVC conduit wiring system With 2 x 1.5 sq. mm. P.V.C. insulated single core copper conductor cable in 20 mm dia, 2.0 mm thick rigid P.V.C. conduits.

Wiring for drawing sub-main line with P.V.C. insulated unsheathed 1.1 K.V. grade (I.S.I marked, R.R Cable/Finolex/Havells Make) single core copper conductor cable in with earth continuity in Recessed PVC conduit wiring system : With 2 x 2.5 sq. mm. + earth continuity with 1x2.5 sq. mm. PVC.insulated unsheathed single core copper conductor cable in 20 mm. dia., 2 mm thick Rigid P.V.C. Conduit pipes.

Wiring for drawing sub-main line with P.V.C. insulated unsheathed 1.1 K.V. grade (I.S.I marked, R.R Cable/Finolex/Havells Make) single core copper conductor cable in with earth continuity in Recessed PVC conduit wiring system : With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. PVC. insulated unsheathed single core copper conductor cable in 20 mm. dia., 2 mm thick. Rigid P.V.C. Conduit pipes.

Wiring for drawing sub-main line with P.V.C. insulated unsheathed 1.1 K.V. grade (I.S.I marked, R.R Cable/Finolex/Havells Make) single core copper conductor cable in with earth continuity in Recessed PVC conduit wiring system : With 2 x 6 sq. mm. + earth continuity with 1x4 sq. mm. PVC. insulated unsheathed single core copper conductor cable in 20 mm. dia., 2 mm thick. Rigid P.V.C. Conduit pipes.

Wiring for drawing sub-main line in Recessed P.V.C. Conduit wiring system. With 3 x 6 sq. mm. + 1 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. PVC. insulated unsheathed single core copper conductor cable in 25 mm, 2 mm thick, dia. rigid P.V.C. Conduit pipes.

Wiring for drawing sub-main line in Recessed P.V.C. Conduit wiring system. With 3 x 10 sq. mm, + 1 x 6 sq. mm. + earth continuity with 1x4 sq. mm. PVC. insulated unsheathed single core copper conductor cable in 32 mm. Dia, 2 mm thick, rigid P.V.C. Conduit pipes.

Supplying and fixing brass batten holder including connections etc. complete (without shades & bulbs)

Supplying and fixing bulk head fitting suitable for 20 watts CFL. lamp complete with all accessories including connections etc. as required complete including 20 watts CFL Lamp as directed and specified by the Department.

Supplying and fixing Call bell (Buzzer) including 5 Amps capacity flush type bell push switch including connections etc. as required complete.

Supplying and fitting of 18/20 watt CFL lamp in the existing brass batten holder/angle holder/decorative bracket/bulk head fitting etc. as specified and directed by the Department

Installation of Earth station with 40 mm. dia. and 4.50 metre long G.I. pipe with necessary G.I. reducing socket 40 mm x 20 mm. size locking arrangement with h'inged cover plate, funnel, G.I. nuts, through bolts etc. for putting pipe and re-fitting with necessary enclosure on the top etc. as required complete.

Extra for using salt (5 kg) and Charcoal (64 kg. for pipe earth electrode as required.

Installation of Earth stations with necessary Earth plate including providing all accessories masonary enclosure with cover plate having locking arrangement and 20 mm. dia. G.I. pipe, watering pipe with funnel, G.I. bolts, nuts, checknuts etc. but without Charcoal or coke and salt as required including excavation work and refilling complete : With 600 mm x 600 mm x 3 mm. Thick (10.5 Kg. approx.) Copper earth plate.

Extra for Charcoal (96 Kg.) and salt (5 Kg.) for G.I. / Copper plate earth electrode as required complete

Supplying and laying 6 S.W.G. G.I. earth wire at 0.50 metre below ground level for Conductor earth electrodes including soldering, excavation work and refilling etc. as required complete.

Supplying and laying 25 mm x 4 mm. size Copper Strip in 40 mm. dia G.l.pipe from earth electrodes including providing and fixing necessary bend etc. including soldering excavation work as refilling etc. as required complete.

Supplying including fitting fixing of high speed 5 star A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connections etc. as required complete and as directed by the Department [Without regulator]. 1200 mm sweep

Supplying including fitting fixing of A.C. Exhaust fan in the existing hole on the wall of follwing sweeps and making necessary connections etc. as required complete and as directed by the Department : Domestic 225/230 mm sweep

Supplying including fitting fixing of A.C. Exhaust fan in the existing hole on the wall of follwing sweeps and making necessary connections etc. as required complete and as directed by the Department : Heavy Duty for 900 rpm/960 rpm 380 mm sweep

Supplying including fitting fixing of Electronic STEP Type Regulator for ceiling fan complete with all connections in the existing board as required complete and as directed by the department.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted single door surface mounting SPN MCB DB incorporated with bas-bar, neutral link, earth bar and Din rail etc. fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as specified and directed by the department. 8 way SPN single door

Supplying with fitting and fixing Single Pole 10 KA 240/415 V 50 Hz MCB of the following capacity complete with necessary connection as specified and directed by the deptt. 6A -32A

Supplying with fitting and fixing sheet steel,phosphatised, powder painted Double door surface mounting SPN MCB DB (IP-43 protection) incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. Complete with making necessary connection as specified and directed by the deptt. [Legrand/Merlin Gerin/ Hagger make] 12 way SPN double door

Supplying with fitting and fixing sheet steel,phosphatised, powder painted double door surface mounting TPN MCB DB (IP-43 protection) incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. Complete with making necessary connection as specified and directed by the deptt. [Legrand/Merlin Gerin/ Hagger make] 4 way TPN (4+12) double door

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt. [Legrand/Merlin Gerin/ Hagger make] B. C Series 1. Single Pole 10 KA 240 //415 50 Hz MCB : 6A -32A

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt. [Legrand/Merlin Gerin/ Hagger make] B. C Series 1. Single Pole 10 KA 240 //415 50 Hz MCB : 40A

Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt. [Legrand/Merlin Gerin/ Hagger make] 40A

Supplying with fitting and fixing 30mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as specified and directed by the deptt. [Legrand/Merlin Gerin/ Hagger make] 40A

Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adustable Ir setting 0.7-1)( without enclosure) of the following capacity complete with making necessary connection as specified and directed by the deptt. [Legrand/Merlin Gerin/ Hagger make] 63A

Supplying including installation 5 KVA single phase 140-280 V 50 Hz auto cut digital display wall mounting Voltage Stabilizer, 9 A to 19 A (Remson/Venus/Indo make)

Supplying with fitting and fixing Single Phase D.O.L Starter of the following specification complete including making necessary connection as specified and directed by the deptt. Overload Relay Range 6.0 - 9.3 Amps for 3.7 KW

Supplying including installation of submersible type water supply motor pumpset with all accessories including panel board on C.C. foundation of Proportion 1 :2:4 jammed with M.S. Nuts and Bolts wire rope submersible cable without suction G.I. Pipe including making necessary connection etc. as reqd. complete. ( 1 no. + 1 no. standby ) 2 H.P. Three Phase

Supplying,installation,testing and Commission of the following indoor decorative recessed typed mirror optics luminaries complete with all accessories such as ballast, starter etc. In the flase ceiling type Armstronng /Gypsum or similar ceiling mouting TBS 869/414 D8 HF 4 x TL5 14W 240 V Philips MakeSereno D8 Micro-Optics based luminaire suitable for recess mounting in modular ceilings with 600x600 mm module. Square luminaire designed for 4x 14W Lamps.

Supplying, installation, testing and commissioning of the following TL5 Flourescent luminaries complete with all accessories such as ballast, staeter etc. directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department : ADRENO 14W TWG207 1xTL514W (45% energy saving as compared to 40w conventional batten. • Comes with diffuser, enhances quality of light.• High Power factor (PF >.98) batten.• 3D Batwing Design channel, enhances light output.• Warm start operation, helps in extra long life.• Stop Circuit – Additional safety feature.)

Supplying, installation, testing and commissioning of the following TL5 Flourescent luminaries complete with all accessories such as ballast, staeter etc. directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department : ADRENO 28W TWG207 1xTL528W HF (45% energy saving as compared to 40w conventional batten. • Comes with diffuser, enhances quality of light.• High Power factor (PF >.98) batten.• 3D Batwing Design channel, enhances light output.• Warm start operation, helps in extra long life.• Stop Circuit – Additional safety feature.)

Supplying, installation, testing and commissioning of the following TL5 Flourescent luminaries complete with all accessories such as ballast, staeter etc. directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C.copper conductor as required and as directed by the department : TMS122 M 2xTL528W EBE 2xTL528W Pentura Industrial batten suitable for single TL-5 lamp 28W. Available with optional reflector. (Bright & Elegant • 45% energy saving as compared to 40w conventional batten.• High Power factor (PF>.98) batten.• )

Fluorescent Lamp (Corrosion Proof) complete with all accessories. (Philips Make) Model No. TMX 095 2x TLD 36 W EBT 2x TLD 36W

Supplying including installation ,testing and commissioning of Hi-Wall 5 Star Rating Non ducted Split type AC of 1.50 Ton capacity with cordless Remote, complete with copper pipe and electrical connection between the room unit and outdoor Unit, as directed by the Deptt. Voltas Make

Supplying fitting & fixing and connecting 1/2 inch & 3/4 inch copper piping with insulation along with connecting cable including testing & commissioning as directed by the department.